aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-12-13[SPARC64]: Fix two kernel linear mapping setup bugs.David S. Miller
This was caught and identified by Greg Onufer. Since we setup the 256M/4M bitmap table after taking over the trap table, it's possible for some 4M mapping to get loaded in the TLB beforhand which later will be 256M mappings. This can cause illegal TLB multiple-match conditions. Fix this by setting up the bitmap before we take over the trap table. Next, __flush_tlb_all() was not doing anything on hypervisor platforms. Fix by adding sun4v_mmu_demap_all() and calling it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix endless loop in cheetah_xcall_deliver(). [SERIAL] sparc: Infrastructure to fix section mismatch bugs.
2007-12-12Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/isp1301_omap: Build fix i2c: Add missing spaces in split log messages i2c-gpio: Initialize adapter class i2c: Delete an outdated piece of documentation
2007-12-12[SPARC64]: Fix endless loop in cheetah_xcall_deliver().David S. Miller
We need to mask out the proper bits when testing the dispatch status register else we can see unrelated NACK bits from previous cross call sends. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-12[SERIAL] sparc: Infrastructure to fix section mismatch bugs.Martin Habets
This patch against 2.6.23 sparc-2.6.git contains a number of minor cleanups of the sparc serial drivers. Initially I fixed this build warning: WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios') which is done by declaring sunserial_console_match() as __init. This resulted in build warnings on sunserial_current_minor. To resolve these the variable was changed so it is no longer global, and to hide operations on it inside 2 new functions. These functions handle the UART minor handling code that is common to all sparc serial drivers. These changes allowed to clean up the uart counters in all the sparc serial drivers, and the administration of minor device numbers. Lastly, sunserial_console_termios() does not need to be exported since it is only called from non-modular code. Sadly, the following build warning still exists: WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors') This could be resolved by not exporting sunserial_console_match(), but this is not possible at the moment because it is being called from modular code. On the other hand, this is a bogus warning since it comes from a ksymtab section. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-12i2c/isp1301_omap: Build fixDavid Brownell
Build fix to the isp1301_omap driver ... this driver gets built more often in the OMAP tree than in mainline, partly because the defconfig for H2 (plus probably H3 and H4) needs updating. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12i2c: Add missing spaces in split log messagesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12i2c-gpio: Initialize adapter classAtsushi Nemoto
This is required to let hwmon drivers attach to the adapter. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12i2c: Delete an outdated piece of documentationJean Delvare
I'm amazed that this old piece of documentation managed to survive until today. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-12-12V4L/DVB (6609): Re-adds lock safe videobuf_read_startMauro Carvalho Chehab
videobuf_dvb needs videobuf_read_start. The EXPORT_SYMBOL_GPL() were removed by a previous patch. However, videobuf_dvb needs this. This patch re-adds videobuf_read_start, doing the proper lock. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11Revert "make bnx2x select ZLIB_INFLATE"Linus Torvalds
This reverts commit 70eba18b5664f90d7620905e005b89388e5fd94b, as per Jeff Garzik: "That was meant for 2.6.25, and actually (due to patching) applied to a completely unrelated 2.6.24 net driver." Noted-by: Roland Dreier <rdreier@cisco.com> Requested-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-11V4L/DVB (6797): bt8xx/ section fixesAdrian Bunk
This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6796): ivtv/ section fixAdrian Bunk
This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6794): Fix compilation when dib3000mc is compiled as a moduleMauro Carvalho Chehab
As reported by Andrew Morton: > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6733): DVB: Compile 3000MC-specific DIB code only for ↵Jiri Kosina
CONFIG_DVB_DIB3000MC On Tue, 4 Dec 2007, Ingo Molnar wrote: > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_get_tuner_i2c_master' > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_set_config' Seems like -common part contains also code that is not completely common to all the modules. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6750): Fix in-kernel compilation for cxusbMauro Carvalho Chehab
cxusb needs tuner-xc2028*.h files, but Makefile is not adding its patch drivers/media/dvb/dvb-usb/cxusb.c:33:26: error: tuner-xc2028.h: File not found drivers/media/dvb/dvb-usb/cxusb.c:34:32: error: tuner-xc2028-types.h: File not found Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6746): saa7134-dvb: fix tuning for WinTV HVR-1110Benoit Istin
There are several months my hvr1110 stop working. This is very simple to fix, for my card revision at least, by setting a missing field to the hauppauge_hvr_1110_config. Signed-off-by: Benoit Istin <beistin@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6751): V4L: Memory leak! Fix count in videobuf-vmalloc mmapBrandon Philips
This is pretty serious bug. map->count is never initialized after the call to kmalloc making the count start at some random trash value. The end result is leaking videobufs. Also, fix up the debug statements to print unsigned values. Pushed to http://ifup.org/hg/v4l-dvb too Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6690): saa7134: fix ignored interruptsHeikki Lindholm
The saa7134 video driver starts dropping frames when used together with the saa7134-alsa driver. Frames are dropped because when an audio event is waiting the driver simply ignores the interrupt and passes it on to the saa7134-alsa interrupt handler. The alsa interrupt handler in turn acknowledges all types of events thus clearing the pending video events as well. Fix by only masking out the audio event in the video interrupt handler and by only acknowledging the audio event in the alsa driver. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6686): saa7134: fix composite over s-video input on the Tevion MD 9717Hermann Pitton
The vmux for composite over s-video input was wrong. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6684): Complement va_start() with va_end() + style fixesRichard Knutsson
Complement va_start() with va_end() + minor style fixes in the same function. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6666): saa7134-alsa: fix period handlingHeikki Lindholm
The period handling in saa7134-alsa is broken in two ways. First, the minimum number of periods of two does not work, because the dma is setup two periods ahead in the irq handler. Fix the minimum to four periods. Second, the code assumes that the number of periods is divisible by two, which isn't always the case on ALSA. Fix by adding a constraint. Signed-off-by: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6629): zl10353: fix default adc_clock and TRL nominal rate calculationChris Pascoe
The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6615): V4L: Fix VIDIOCGMBUF locking in saa7146Brandon Philips
Fallout from videobuf_mmap_setup() locking fixes. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6602): V4L: Convert videobuf drivers to videobuf_stopBrandon Philips
Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6601): V4L: videobuf-core locking fixes and commentsBrandon Philips
- Add comments to functions that require that caller hold q->lock - Add __videobuf_mmap_free that doesn't hold q->lock for use within videobuf - Add locking to videobuf_mmap_free - Fix linux/drivers/media/common/saa7146_video.c which was holding lock around videobuf_read_stop - Add locking to functions that operate on a queue - Add videobuf_stop to take care of stopping in both the read and stream case TODO: bttv still has an unsafe call to videobuf_queue_is_busy Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6581): Fix: avoids negative vma usage countMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6579): Fix bug #8824: Correct support for Diseqc on tda10086Hartmut Hackmann
This is a modified version of a patch previously posted by Thomas Unverzagt. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6542): Fix S-video mode on tvp5150Mauro Carvalho Chehab
Thanks to Markus Reichberger to point this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6540): em28xx: fix failing autodetection after the rebootSascha Sommer
The attached patch is required so that the autodetecion code also works after a reboot. Setting the I2C speed does not seem to be supported for em2800. Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6485): ivtv: fix compile warningHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11[IPSEC]: Fix potential dst leak in xfrm_lookupHerbert Xu
If we get an error during the actual policy lookup we don't free the original dst while the caller expects us to always free the original dst in case of error. This patch fixes that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[VLAN]: Fix potential race in vlan_cleanup_module vs vlan_ioctl_handler.Pavel Emelyanov
The vlan module cleanup function starts with vlan_netlink_fini(); vlan_ioctl_set(NULL); The first call removes all the vlan devices and the second one closes the vlan ioctl. AFAIS there's a tiny race window between these two calls - after rtnl unregistered all the vlans, but the ioctl handler isn't set to NULL yet, user can manage to call this ioctl and create one vlan device, and that this function will later BUG_ON seeing non-emply hashes. I think, that we must first close the vlan ioctl and only after this remove all the vlans with the vlan_netlink_fini() call. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[NET]: Fix wrong comments for unregister_net*Wang Chen
There are some return value comments for void functions. Fixed it. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Update version to 1.6.9.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Fix RX packet rot.Michael Chan
Packets can be left in the RX ring if the NAPI budget is reached. This is caused by storing the latest rx index at the beginning of bnx2_rx_int(). We may not process all the work up to this index if the budget is reached and so some packets in the RX ring may rot when we later check for more work using this stored rx index. The fix is to not store this latest hw index and only store the processed rx index. We use a new function bnx2_get_hw_rx_cons() to fetch the latest hw rx index. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[BNX2]: Add PHY_DIS_EARLY_DAC workaround.Michael Chan
5709 Ax and Bx chips all need this workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[S390]: Fix use of skb after netif_rxJulia Lawall
Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. netif_rx_ni calls netif_rx, so the same problem occurs in the files below. I have left the updating of dev->last_rx after the calls to netif_rx_ni because it seems time dependent, but moved the other field updates before. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[XTENSA]: Fix use of skb after netif_rxJulia Lawall
Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. The same problem occurs in some other drivers as well. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[UM]: Fix use of skb after netif_rxJulia Lawall
Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. The same problem occurs in some other drivers as well. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[IPv6] ESP: Discard dummy packets introduced in rfc4303Thomas Graf
RFC4303 introduces dummy packets with a nexthdr value of 59 to implement traffic confidentiality. Such packets need to be dropped silently and the payload may not be attempted to be parsed as it consists of random chunk. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[IPv4] ESP: Discard dummy packets introduced in rfc4303Thomas Graf
RFC4303 introduces dummy packets with a nexthdr value of 59 to implement traffic confidentiality. Such packets need to be dropped silently and the payload may not be attempted to be parsed as it consists of random chunk. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[IPV4]: Swap the ifa allocation with the"ipv4_devconf_setall" callPavel Emelyanov
According to Herbert, the ipv4_devconf_setall should be called only when the ifa is added to the device. However, failed ifa allocation may bring things into inconsistent state. Move the call to ipv4_devconf_setall after the ifa allocation. Fits both net-2.6 (with offsets) and net-2.6.25 (cleanly). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11[IPV6] XFRM: Fix auditing rt6i_flags; use RTF_xxx flags instead of RTCF_xxx.YOSHIFUJI Hideaki
RTCF_xxx flags, defined in include/linux/in_route.h) are available for IPv4 route (rtable) entries only. Use RTF_xxx flags instead, defined in include/linux/ipv6_route.h, for IPv6 route entries (rt6_info). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-10Linux 2.6.24-rc5Linus Torvalds
2007-12-10xen: relax signature checkJeremy Fitzhardinge
Some versions of Xen 3.x set their magic number to "xen-3.[12]", so relax the test to match them. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-10Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Malta: Enable tickless and highres timers. [MIPS] Bigsur: Enable tickless and and highres timers. qemu: do not enable IP7 blindly [MIPS] Alchemy: Fix Au1x SD controller IRQ [MIPS] Don't byteswap writes to display when running bigendian
2007-12-10proc: remove/Fix proc generic d_revalidateEric W. Biederman
Ultimately to implement /proc perfectly we need an implementation of d_revalidate because files and directories can be removed behind the back of the VFS, and d_revalidate is the only way we can let the VFS know that this has happened. Unfortunately the linux VFS can not cope with anything in the path to a mount point going away. So a proper d_revalidate method that calls d_drop also needs to call have_submounts which is moderately expensive, so you really don't want a d_revalidate method that unconditionally calls it, but instead only calls it when the backing object has really gone away. proc generic entries only disappear on module_unload (when not counting the fledgling network namespace) so it is quite rare that we actually encounter that case and has not actually caused us real world trouble yet. So until we get a proper test for keeping dentries in the dcache fix the current d_revalidate method by completely removing it. This returns us to the current status quo. So with CONFIG_NETNS=n things should look as they have always looked. For CONFIG_NETNS=y things work most of the time but there are a few rare corner cases that don't behave properly. As the network namespace is barely present in 2.6.24 this should not be a problem. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "Denis V. Lunev" <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-10atmel_spi: reload RCR before TCRRini van Zetten
We have a wifi module connected to the spi bus and got sometimes FIFO overrun errors on the spi bus. After some investigation i found that the driver loads the TCR (transmit count) register before the RCR (receive count). When the transfer list is not empty the atmel_spi_next_message is called while tx and rx are enabled. As soon as the TCR is loaded, hardware starts transfer and causes a rx fifo overrun because the RCR is not loaded yet. Load the RCR before the TCR. After this patch the fifo overrun disapears at out setup. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Rini van Zetten <rini@arvoo.nl> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-10MAINTAINERS: update stale entriesJoe Perches
Some bad email addresses are removed: linux-tr@linuxtr.net ehaase@inf.fu-berlin.de Some are updated: linux@maxim.org.za to andrew@sanpeople.com linux-kernel@linux-mips.org to linux-mips@linux-mips.org jdike@karaya.com to jdike@addtoit.com The PCMCIA entry is corrected to a web address The ZR36120 VIDEO FOR LINUX DRIVER entry is removed Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 03:35:02 +0000