aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-01[ARM] pxa/em-x270: don't use pxa_camera init() callbackAntonio Ospite
pxa_camera init() is ambiguous, it's better to statically configure the sensor. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: add PWM backlight supportIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: update defconfigIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: update authors and copyrightIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: add da9030 supportIgor Grinberg
Register DA9030 PMIC. Use only backlight sub-device for now. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: enable USB port 2 for PXA300Igor Grinberg
Port 2 requires setting of UP2OCR register to function as USB host. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: add support for PXA310 cpuIgor Grinberg
CM-X300 can be assembled with PXA300 and PXA310 CPU. Provide support for both CPU variants. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: add Wi2Wi chip (Bluetooth and WiFi) initializationIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: add ac97 controller registrationIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: add TDO35S lcd supportIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/cm-x300: add revision difference handlingIgor Grinberg
Different revisions of CM-X300 use different pins for several functions. Make the kernel aware of it. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/viper: convert to use plat_serial8250_port irqflags fieldMarc Zyngier
Use .irqflags in the plat_serial8250_port structure to set IRQ polarity, and get rid of the corresponding set_irq_type(). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/ezx: update ezx_defconfig now that ezx-pcap is inAntonio Ospite
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phoneAntonio Ospite
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/ezx: add camera support for A780 and A910 EZX phonesAntonio Ospite
Signed-off-by: Bart Visscher <bartv@thisnet.nl> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*Pavel Machek
Battery power levels are shared between spitz and corgi, rename variable to reflect it. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/zaurus: cleanup sharpsl_pm.cPavel Machek
This fixes checkpatch/style problems in sharpsl_pm.c, allowing me to submit real fixes next. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: rename macro from pxa9xx to pxa93xHaojian Zhuang
Because original macro can only judge whether current CPU is pxa93x, rename the macro to correct name. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: add EXT_WAKEUP interrupts handling for pxa3xxMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: make CPU_PXA* to be selectable hidden optionsEric Miao
CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent and should be made into selectable hidden options. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: select CPU_PXA310 for MACH_COLIBRI300Eric Miao
MACH_COLIBRI300 is supposed to support both PXA300 and PXA310, select the missing CPU_PXA310. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de>
2009-12-01[ARM] pxa: introduce CONFIG_MACH_ZYLONITE{300,320} for CPU_PXA* removingEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: allow platforms to control which uarts are registeredRussell King
For some platforms, it is inappropriate to register all PXA UARTs. In some cases, the UARTs may not be used, and in others we may want to avoid registering the UARTs to allow other drivers (eg, FICP) to make use of the UART. In addition, a while back there was a request to be able to pass platform data to the UART driver. This patch enables all of this by providing functions platforms can call to register each individual UART. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: add U2D registers and bits definitionsIgor Grinberg
This should be eventually moved to somewhere closer to the U2D driver, but is kept here atm so it's easier for USB configuration code to work. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: register U2D clock for pxa3xxIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: use platform_device_id table for SSP driverEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: add apmu clock support in mmpHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: add missing irq events for pxa168Haojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: re-order platforms in Kconfig and MakefileEric Miao
Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/treo: add Palm Centro 685 supportTomáš Čech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/treo: generalisation of Treo680 codeTomáš Čech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: update flash structure in onenand infoHaojian Zhuang
Since flash structure is changed from flash_platform_data to onenand_platform_data in generic driver. Update the struct in saar and ttc platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: add onenand support for SAARHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: add onenand support for TTC-DKBHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: add nand support in aspensite boardHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: add nand device and clock for pxa168/pxa910Haojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: move pxa3xx_nand.h common into plat directoryHaojian Zhuang
Since the same nand controller is shared between ARCH_PXA and ARCH_MMP. Move the pxa3xx_nand.h from mach directory to plat directoy. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: update dependancy to support ARCH_MMPHaojian Zhuang
MTD_NAND_PXA3xx module is shared between ARCH_PXA and ARCH_MMP. Update this configuration according to it. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: add new nand chip supportHaojian Zhuang
Support samsung 2GbX8 and 32GbX8 nand flash. Support micron 4GbX8 and 4GbX16 nand flash. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: disable nand irq in initializationHaojian Zhuang
In some bootloader, IRQ is enabled. Writing nand triggers unexpected interrupts. So disable nand irq in initialization. After nand initialized and in working state, irq is controlled by nand driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: remove hardcode irq numberHaojian Zhuang
Nand driver uses IRQ_NAND as hardcode irq number. In ARCH_MMP, the irq number is different. So get irq resource from platform device structure and use it in initialization and deinitialization code. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: remove hardcode register addressHaojian Zhuang
Although nand controller is same between PXA3xx and MMP, the register space is different. Remove the hardcode register address setting in pxa3xx_nand.h. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: adjust timing of Micron NAND flashHaojian Zhuang
Slow down the tRp of Micron NAND flash timing. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: reset read buffer before readingHaojian Zhuang
Initialize the read buffer content to 0xFF. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: fix memory out of boundHaojian Zhuang
When fetch nand data with non-DMA mode, we should align info->data_size to 32bit, not 8bit. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/saar: set default WLED output currentHaojian Zhuang
Set default WLED output current in saar. Otherwise, LCD backlight won't be effective. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01backlight: da903x_bl: control WLED output current in da9034Haojian Zhuang
Update WLED output current source before changing brightness. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01backlight: tdo24m: ensure chip select changes between transfersMike Rapoport
Some SPI host drivers do not change chip select betwen transfers unless .cs_chnage field is explicitly set. The LCD spec requires chip select change between consecuitive transfers, so ensure it at the SPI driver level. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxamci: introduce mmc_has_26mhz() and include pxa935Haojian Zhuang
Along with more processor supporting 26MHz mode (including pxa935), introduce an individual macro mmc_has_26mhz() for this. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa168fb: remove useless vsync/hsync invert flagJun Nie
fb_var_screeninfo.var has already encoded this information. Signed-off-by: Jun Nie <njun@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 07:32:35 +0000