aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-03-23Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (36 commits) [PATCH] hwmon: add required idr locking [PATCH] I2C: hwmon: Rename register parameters [PATCH] I2C: Drop unneeded i2c-dev.h includes [PATCH] I2C: i2c-ixp4xx: Add hwmon class [PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support [PATCH] I2C: i2c-amd756-s4882: Improve static mutex initialization [PATCH] I2C: i2c-ali1535: Drop redundant mutex [PATCH] i2c: Cleanup isp1301_omap [PATCH] i2c: Fix i2c-ite name initialization [PATCH] i2c: Drop the i2c-frodo bus driver [PATCH] i2c: Optimize core_lists mutex usage [PATCH] w83781d: Don't reset the chip by default [PATCH] w83781d: Document the alarm and beep bits [PATCH] w83627ehf: Refactor the sysfs interface [PATCH] hwmon: Support the Pentium M VID code [PATCH] hwmon: Add support for the Winbond W83687THF [PATCH] hwmon: f71805f semaphore to mutex conversions [PATCH] hwmon: Semaphore to mutex conversions [PATCH] i2c: Semaphore to mutex conversions, part 3 [PATCH] i2c: Semaphore to mutex conversions, part 2 ...
2006-03-23Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (49 commits) [PATCH] acpiphp: fix acpi_path_name [PATCH] ibmphp: remove TRUE and FALSE [PATCH] PCI Hotplug: add common acpi functions to core [PATCH] PCI: kzalloc() conversion in drivers/pci [PATCH] acpiphp: Scan slots under the nested P2P bridge [PATCH] PCI Hotplug: SN: Fix cleanup on hotplug removal of PPB [PATCH] shpchp: cleanup bus speed handling [PATCH] PCI: fix pci_request_region[s] arg [PATCH] PCI: Provide a boot parameter to disable MSI [PATCH] PCI: the scheduled removal of PCI_LEGACY_PROC [PATCH] PCI: cpqphp_ctrl.c: board_replaced(): remove dead code [PATCH] acpiphp: fix bridge handle [PATCH] acpiphp - slot management fix - V4 [PATCH] acpi: remove dock event handling from ibm_acpi [PATCH] acpiphp: add dock event handling [PATCH] acpi: export acpi_bus_trim [PATCH] acpiphp: add new bus to acpi [PATCH] PCI: Move pci_dev_put outside a spinlock [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix [PATCH] PCI: fix problems with MSI-X on ia64 ...
2006-03-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Update driver version and reldate. [TG3]: Add 5755 nvram support [TG3]: Add 5755 support [IPV6]: ip6_xmit: remove unnecessary NULL ptr check [NET_SCHED]: cls_u32: remove unnecessary NULL-ptr check [IPV4]: Add fib rule netlink notifications [BNX2]: Update version and reldate [BNX2]: Separate tx producer and consumer fields [BNX2]: Move .h files to bnx2.c [BNX2]: Combine small mem allocations [BNX2]: Fix link change handling [PKTGEN]: Add MPLS extension.
2006-03-23Merge git://oss.sgi.com:8090/oss/git/xfs-2.6Linus Torvalds
* git://oss.sgi.com:8090/oss/git/xfs-2.6: (71 commits) [XFS] Sync up one/two other minor changes missed in previous merges. [XFS] Reenable the noikeep (delete inode cluster space) option by default. [XFS] Check that a page has dirty buffers before finding it acceptable for [XFS] Fixup naming inconsistencies found by Pekka Enberg and one from Jan [XFS] Explain the race closed by the addition of vn_iowait() to the start [XFS] Fixing the error caused by the conflict between DIO Write's [XFS] Fixing KDB's xrwtrc command, also added the current process id into [XFS] Fix compiler warning from xfs_file_compat_invis_ioctl prototype. [XFS] remove bogus INT_GET for u8 variables in xfs_dir_leaf.c [XFS] endianess annotations for xfs_da_node_hdr_t [XFS] endianess annotations for xfs_da_node_entry_t [XFS] store xfs_attr_inactive_list_t in native endian [XFS] store xfs_attr_sf_sort in native endian [XFS] endianess annotations for xfs_attr_shortform_t [XFS] endianess annotations for xfs_attr_leaf_name_remote_t [XFS] endianess annotations for xfs_attr_leaf_name_local_t [XFS] endianess annotations for xfs_attr_leaf_entry_t [XFS] endianess annotations for xfs_attr_leaf_hdr_t [XFS] remove bogus INT_GET on u8 variables in xfs_dir2_block.c [XFS] endianess annotations for xfs_da_blkinfo_t ...
2006-03-23[PATCH] acpiphp: fix acpi_path_nameMUNEDA Takahiro
I encountered the problem that the insmod of the acpiphp fails because of the mis-freeing of the memory. I tested this patch on my tiger4 box. Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] ibmphp: remove TRUE and FALSEKristen Accardi
This patch removes the defines TRUE and FALSE and just uses 0 or 1. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI Hotplug: add common acpi functions to coreKristen Accardi
shpchprm_acpi.c and pciehprm_acpi.c are nearly identical. In addition, there are functions in both these files that are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro. This patch also changes acpiphp to use the common hpp code. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: kzalloc() conversion in drivers/pciEric Sesterhenn
this patch converts drivers/pci to kzalloc usage. Compile tested with allyes config. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] acpiphp: Scan slots under the nested P2P bridgeKenji Kaneshige
Current ACPIPHP driver scans only slots under the top level PCI-to-PCI bridge. So hotplug PCI slots under the nested PCI-to-PCI bridge would not be detected. For example, if the system has the ACPI namespace like below, hotplug slots woule not be detected. Device (PCI0) { /* Root bridge */ Name (_HID, "PNP0A03") Device (P2PA) { /* PCI-to-PCI bridge */ Name (_ADR, ...) Device (P2PB) { /* PCI-to-PCI bridge */ Name (_ADR, ...) Device (S0F0) { /* hotplug slot */ Name (_ADR, ...) Name (_SUN, ...) Method (_EJ0, ...) { ... } } ... Device (S0F7) { /* hotplug slot */ Name (_ADR, ...) Name (_SUN, ...) Method (_EJ0, ...) { ... } } Device (S1F0) { /* hotplug slot */ Name (_ADR, ...) Name (_SUN, ...) Method (_EJ0, ...) { ... } } ... } } } This patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI Hotplug: SN: Fix cleanup on hotplug removal of PPBJohn Keller
When doing a hotplug removal of a PPB, sn_bus_store_sysdata() needs to be called for the PPB and all of its children. Acked-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp: cleanup bus speed handlingKenji Kaneshige
The code related to handling bus speed in SHPCHP driver is unnecessarily complex. This patch cleans up and simplify that. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: fix pci_request_region[s] argJeff Garzik
Add missing 'const' to pci_request_region[s] 'res_name' arg, since we pass it directly to __request_region(), whose 'name' arg is also const. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: Provide a boot parameter to disable MSIMatthew Wilcox
Several drivers are starting to grow options to disable MSI. However, it's often a host chipset issue, not something which individual drivers should handle. So we add the pci=nomsi kernel parameter to allow the user to disable MSI modes for systems we haven't added to the quirk list yet. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: the scheduled removal of PCI_LEGACY_PROCAdrian Bunk
This patch contains the scheduled removal of PCI_LEGACY_PROC. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: cpqphp_ctrl.c: board_replaced(): remove dead codeAdrian Bunk
The Coverity checker correctly noted, that in function board_replaced in drivers/pci/hotplug/cpqphp_ctrl.c, the variable src always has the value 8, and therefore much code after the ... if (rc || src) { ... if (rc) return rc; else return 1; } ... can never be called. This patch removes the unreachable code in this function fixing kernel Bugzilla #6073. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] acpiphp: fix bridge handleMUNEDA Takahiro
When hotplug slot is under the host bridge, DEVICE_ACPI_HANDLE(&bus->self->dev) fails since '&bus->self' was not set. This patch fixes it. This patch is based on kristen's latest patches. I tested this patch on my Tiger4. Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] acpiphp - slot management fix - V4MUNEDA Takahiro
o This patch removes IDs (for slots management). o This patch removes the slot register/unregister processes from the init/exit phases. Instead, adds these processes in the bridge add/cleanup phases. o Currently, this change doesn't have any meanings. But these changes are needed to support p2p bridge(with hotplug slot) Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] acpi: remove dock event handling from ibm_acpiKristen Accardi
Remove dock station support from ibm_acpi by default. This support has been put into acpiphp instead. Allow ibm_acpi to continue to provide docking station support via config option for laptops/docking stations that are not supported by acpiphp. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] acpiphp: add dock event handlingKristen Accardi
These patches add generic dock event handling to acpiphp. If there are pci devices that need to be inserted/removed after the dock event, the event notification will be handed down to the normal pci hotplug event handler in acpiphp so that new bridges/devices can be enumerated. Because some dock stations do not have pci bridges or pci devices that need to be inserted after a dock, acpiphp will remain loaded to handle dock events even if no hotpluggable pci slots are discovered. You probably need to have the pci=assign-busses kernel parameter enabled to use these patches, and you may not allow ibm_acpi to handle docking notifications and use this patch. This patch incorporates feedback provided by many. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] acpi: export acpi_bus_trimKristen Accardi
Export the acpi_bus_trim function so that the pci hotplug driver can use it. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] acpiphp: add new bus to acpiKristen Accardi
If we add a new bridge with subordinate busses, we should call make sure that acpi is notified so that the PRT (if present) can be read and drivers who have registered on this bus will be notified when it is started. Also make sure to use the max reserved bus number for the starting the bus scan. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: Move pci_dev_put outside a spinlockAlan Stern
This patch (as659) fixes a might_sleep problem in the PCI core, by moving a call to pci_dev_put() outside the scope of a spinlock. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fixBernhard Kaindl
"In some cases, especially on modern laptops with a lot of PCI and cardbus bridges, we're unable to assign correct secondary/subordinate bus numbers to all cardbus bridges due to BIOS limitations unless we are using "pci=assign-busses" boot option." -- Ivan Kokshaysky (from a patch comment) Without it, Cardbus cards inserted are never seen by PCI because the parent PCI-PCI Bridge of the Cardbus bridge will not pass and translate Type 1 PCI configuration cycles correctly and the system will fail to find and initialise the PCI devices in the system. Reference: PCI-PCI Bridges: PCI Configuration Cycles and PCI Bus Numbering: http://www.science.unitn.it/~fiorella/guidelinux/tlk/node72.html The reason for this is that: ``All PCI busses located behind a PCI-PCI bridge must reside between the secondary bus number and the subordinate bus number (inclusive).'' "pci=assign-busses" makes pcibios_assign_all_busses return 1 and this turns on PCI renumbering during PCI probing. Alan suggested to use DMI automatically set assign-busses on problem systems. The only question for me was where to put it. I put it directly before scanning PCI bus into pcibios_scan_root() because it's called from legacy, acpi and numa and so it can be one place for all systems and configurations which may need it. AMD64 Laptops are also affected and fixed by assign-busses, and the code is also incuded from arch/x86_64/pci/ that place will also work for x86_64 kernels, I only ifdef'-ed the x86-only Laptop in this example. Affected and known or assumed to be fixed with it are (found by googling): * ASUS Z71V and L3s * Samsung X20 * Compaq R3140us and all Compaq R3000 series laptops with TI1620 Controller, also Compaq R4000 series (from a kernel.org bugreport) * HP zv5000z (AMD64 3700+, known that fixup_parent_subordinate_busnr fixes it) * HP zv5200z * IBM ThinkPad 240 * An IBM ThinkPad (1.8 GHz Pentium M) debugged by Pavel Machek gives the correspondig message which detects the possible problem. * MSI S260 / Medion SIM 2100 MD 95600 The patch also expands the "try pci=assign-busses" warning so testers will help us to update the DMI table. Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: fix problems with MSI-X on ia64Grant Grundler
Use "unsigned long" when dealing with PCI resources. The BAR Indicator Register (BIR) can be a 64-bit value or the resource could be a 64-bit host physical address. Enables ib_mthca and cciss drivers to use MSI-X on ia64 HW. Problem showed up now because of new system firmware on one platform. Symptom will either be memory corruption or MCA. Second part of this patch deals with "useless" code. We walk through the steps to find the phys_addr and then don't use the result. I suspect the intent was to zero out the respective MSI-X entry but I'm not sure at the moment. Delete the code inside the #if 0/#endif if it's really not needed. Signed-off-by: Grant Grundler <iod00d@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: resource address mismatchLinus Torvalds
On Tue, 21 Feb 2006, Ivan Kokshaysky wrote: > There are two bogus entries in the BIOS memory map table which are > conflicting with a prefetchable memory range of the AGP bridge: > > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > > 0000:00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: e7e00000-e7efffff > Prefetchable memory behind bridge: fec00000-ffcfffff > ^^^^^^^^^^^^^^^^^ Yes. However, it's pretty clear that the e820 entries are there for a reason. Probably they are a hack by the BIOS maintainers to keep Windows from stomping/moving that region, exactly because they want to keep the bridge where it is (or, it's actually for the BIOS itself - the BIOS tables are a horrid mess, and BIOS engineers are pretty hacky people: they'll add random entries to make their own broken algorithms do the "right thing"). > Starting from 2.6.13, kernel tries to resolve that sort of conflicts, > so that prefetch window of the bridge and the framebuffer memory behind > it get moved to 0x10000000. I think we could (and probably should) solve this another way: consider the ACPI "reserved regions" from the e820 map exactly the same way that we do other ACPI hints - they should restrict _new_ allocations, but not impact stuff we figure out on our own. Basically, right now we assign _unassigned_ resources at "fs_initcall" time. If we were to add in the e820 "reserved region" stuff before that (but after we've done PCI discovery), we'd probably do the right thing. Right now we do the e820 reserved regions very early indeed: we call "register_memory()" from setup_arch(). We could move at least part of it (the part that registers the resources) down a bit. Here's a test-patch. I'm not saying we should absolutely do this, but it might be interesting to try... Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: <bjk@luxsci.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: remove msi save/restore code in specific driverShaohua Li
Remove pcie port driver's msi save/restore code. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: make MSI quirk inheritable from the pci busMichael S. Tsirkin
It turns out AMD 8131 quirk only affects MSI for devices behind the 8131 bridge. Handle this by adding a flags field in pci_bus, inherited from parent to child. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: quirk for asus a8v and a8v delux motherboardsBauke Jan Douma
On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller and MC97 modem controller are deactivated when a second PCI soundcard is present. This patch enables them. Signed-off-by: Bauke Jan Douma <bjdouma@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: SMBus unhide on HP Compaq nx6110tomek@koprowski.org
I attach a trivial patch for 2.6.15.4 that unhides SMBus controller on an HP Compaq nx6110 notebook. Signed-off-by: Tomasz Koprowski <tomek@koprowski.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: Add pci_device_shutdown to pci_bus_typeBrian Gerst
The extra compatability code is not necessary. Any code still using the old shutdown method will trigger the warning in driver_register() instead. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp: adapt to pci driver modelKenji Kaneshige
This patch adapts SHPCHP driver to the PCI device driver model. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp: Fix slot state handlingKenji Kaneshige
Current SHPCHP driver doesn't care about the confliction between hotplug operation via sysfs and hotplug operation via attention button. So if those ware conflicted, slot could be an unexpected state. This patch changes SHPCHP driver to handle slot state properly. With this patch, slot events are handled according to the current slot state as shown at the Table below. Table. Slot States and Event Handling ========================================================================= Slot State Event and Action ========================================================================= STATIC - Go to POWERON state if user initiates (Slot enabled, insertion request via sysfs Slot disabled) - Go to POWEROFF state if user initiates removal request via sysfs - Go to BLINKINGON state if user presses attention button when the slot is disabled - Go to BLINKINGOFF state if user presses attention button when the slot is enabled
2006-03-23[PATCH] shpchp: event handling reworkKenji Kaneshige
The event handler of SHPCHP driver is unnecessarily very complex. In addition, current event handler can only a fixed number of events at the same time, and some of events would be lost if several number of events happened at the same time. This patch simplify the event handler by using 'work queue', and it also fix the above-mentioned issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp: Remove unused wait_for_ctrl_irqKenji Kaneshige
The wait_for_ctrl_irq() function in SHPCHP driver is no longer needed. This patch removes that. This patch has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp: Remove unused pci_bus member from controller structureKenji Kaneshige
This patch removes unused 'pci_bus' member from controller structure. This patch have no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: Avoid leaving MASTER_ABORT disabled permanently when returning ↵Ralf Baechle
from pci_scan_bridge. > On Mon, Feb 13, 2006 at 05:13:21PM -0800, David S. Miller wrote: > > > > In drivers/pci/probe.c:pci_scan_bridge(), if this is not the first > > pass (pass != 0) we don't restore the PCI_BRIDGE_CONTROL_REGISTER and > > thus leave PCI_BRIDGE_CTL_MASTER_ABORT off: > > > > int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass) > > { > > ... > > /* Disable MasterAbortMode during probing to avoid reporting > > of bus errors (in some architectures) */ > > pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); > > pci_write_config_word(dev, PCI_BRIDGE_CONTROL, > > bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); > > ... > > if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) { > > unsigned int cmax, busnr; > > /* > > * Bus already configured by firmware, process it in the first > > * pass and just note the configuration. > > */ > > if (pass) > > return max; > > ... > > } > > > > pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); > > ... > > > > This doesn't seem intentional. Agreed, looks like an accident. The patch [1] originally came from Kip Walker (Broadcom back then) between 2.6.0-test3 and 2.6.0-test4. As I recall it was supposed to fix an issue with with PCI aborts being signalled by the PCI bridge of the Broadcom BCM1250 family of SOCs when probing behind pci_scan_bridge. It is undeseriable to disable PCI_BRIDGE_CTL_MASTER_ABORT in pci_{read,write)_config_* and the behaviour wasn't considered a bug in need of a workaround, so this was put in probe.c. I don't have an affected system at hand, so can't really test but I propose something like the below patch. [1] http://www.linux-mips.org/git?p=linux.git;a=commit;h=599457e0cb702a31a3247ea6a5d9c6c99c4cf195 [PCI] Avoid leaving MASTER_ABORT disabled permanently when returning from pci_scan_bridge. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: Give PCI config access initialization a defined orderingAndi Kleen
I moved it to a separate function which is safer. This avoids problems with the linker reordering them and the less useful PCI config space access methods taking priority over the better ones. Fixes some problems with broken MMCONFIG Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - Fix incorrect return value of interrupt handlerKenji Kaneshige
Current SHPCHP driver has a bug in its interrupt handler which cause "IRQ #: nobody cared" oops. This problem can be reproduced easily by the following operation. # cd /sys/bus/pci/slots/<slot#> # while true; do echo 1 > attention ; done & The reason is that when command complete interrupt is raised, current SHPCHP driver's interrupt handler returns IRQ_NONE regardless of if the interrupt is handled or not. This patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - move slot name into struct slotKenji Kaneshige
This patch moves slot name area into struct slot. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - removed unncessary 'magic' member from slotKenji Kaneshige
This patch removes unnecessary 'magic' member from struct slot of SHPCHP driver. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - replace kmalloc() with kzalloc() and cleanup arg of sizeof()Kenji Kaneshige
This patch replaces kmalloc() and memset() pair with kzalloc() and cleans up the arg of sizeof() in SHPCHP driver. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] pcihp_skeleton.c cleanupKenji Kaneshige
This patch cleans up pcihp_skelton.c as follows. o Move slot name area into struct slot. o Replace kmalloc with kzalloc and clean up the arg of sizeof() o Fix the wrong use of get_*_status() functions. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - bugfix: add missing serializationKenji Kaneshige
Current shpchp driver might cause system panic because of lack of serialization. It can be reproduced very easily by the following operation. # cd /sys/bus/pci/slots/<slot#> # while true; do echo 0 > power ; echo 1 > power ; done & # while true; do echo 0 > power ; echo 1 > power ; done & This patch fixes this issue by changing shpchp to get appropreate semaphore for hot-plug operation. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - cleanup check command statusKenji Kaneshige
This patch cleanups codes that check the command status. For this, it introduces a new semaphore "cmd_sem" for each controller. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - cleanup controller listKenji Kaneshige
This patch changes SHPCHP driver to use list_head structure for managing controller list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - cleanup slot listKenji Kaneshige
This patch changes SHPCHP driver to use list_head structure for managing slot list. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - cleanup shpchp_core.cKenji Kaneshige
This patch cleanups some codes in shpchp_core.c. This patch has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - cleanup init_slots()Kenji Kaneshige
This patch cleanups init_slots() function of SHPCHP driver based on pcihp_skelton.c. This patch has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI hotplug: convert semaphores to mutexIngo Molnar
semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build tested with allyesconfig. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI: quirk for IBM Dock II cardbus controllersKristen Accardi
The IBM Dock II cardbus bridges require some extra configuration before Yenta is loaded in order to setup the Interrupts to be routed properly. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>