aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-21rt2x00: Only remove L2 padding in received frames if there is payload.Gertjan van Wingerde
L2 padding will only be present when there is actual payload present. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt2x00: Reorganize L2 padding inserting function.Gertjan van Wingerde
Simplify the rt2x00queue_insert_l2pad function by handling the alignment operations one by one. Do not special case special circumstances. Basically first perform header alignment, and then perform payload alignment (if any payload does exist). This results in a properly aligned skb. The end result is better readable code, with better results, as now L2 padding is inserted only when a payload is actually present in the frame. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt2x00: Remove SKBDESC_L2_PADDED flag.Gertjan van Wingerde
With the improved L2 padding code, this flag is no longer necessary, as the rt2x00queue_remove_l2pad is capable of detecting by itself if L2 padding is applied. For received frames the RX descriptor flag is still being checked. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt2x00: Further L2 padding fixes.Gertjan van Wingerde
Fix a couple of more bugs in the L2 padding code: 1. Compute the amount of L2 padding correctly (in 3 places). 2. Trim the skb correctly when the L2 padding has been applied. Also introduce a central macro the compute the L2 padding size. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt2x00 : trim the skb after having the l2pad removed.Alban Browaeys
Otherwise we end up truncating the skb before removing the l2pad thus we might have the truncated part become garbage while getting it back in remove_l2pad. For the same issue: remove the skb_trim from the rt2800 fill_rxdone (it is done after l2pad removal in rt2x00lib_rxdone). Signed-off-by: Alban Browaeys <prahal@yahoo.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt2x00 : avoid timestamp for monitor injected frame.Alban Browaeys
Do not include timestamp for a frame that has been injected through a monitor interface. Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Alban Browaeys <prahal@yahoo.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt2x00 : modify padding location.Alban Browaeys
The padding is to be added between header and payload for the only header need padding case. Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Alban Browaeys <prahal@yahoo.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt2x00 : bail out of regbusy_read if device is removed.Alban Browaeys
platform rfkill is async thus we may try to read while the device is already off. Signed-off-by: Alban Browaeys <prahal@yahoo.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rt73usb: add WLI-U2-H54HPKenichi HORIO
Signed-off-by: Kenichi HORIO <moattailk1@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21iwlwifi: remove extra error msg on sensitivity calibrationWey-Yi Guy
Do not need to log error when fail the sensitivity command, driver will send sensitivity write command to uCode after each sensitivity calibration if station is associated with AP. It is a normal case when user unload the module or shutdown the system while still associated with the AP, since uCode already on the way down, it will not reply the sensitivity write request; report error in this case will give misleading information, remove the error checking here to provide a clean shutdown if no other error detected. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21iwlwifi: on-screen event log dumpWey-Yi Guy
This feature enables the on-screen uCode event log dump. The original method will append the event log to syslog; with this capability, we also enable the user to write script to capture the events which provide additional flexibility to help uCode debugging Method 1) change to debugfs directory (sys/kernel/debug/phyX/iwlagn/data) 2) #cat log_event Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21iwlwifi: add continuous uCode event log capabilityWey-Yi Guy
In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21iwlwifi: dump "Control and Status Register" when detect uCode HW/SW errorWey-Yi Guy
When uCode HW/SW error detected, dumping important CSR (Control and Status Registers) values. Also add "csr" debugfs file to dump the current values of CSR defined in CSR table to syslog. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21iwlwifi: log CT_CARD_DISABLED flagWey-Yi Guy
Change name from RF_CARD_DISABLED to CT_CARD_DISABLED to match the indication from uCode, also log the debug message when the condition detected in iwl_rx_card_state_notif() Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wireless: support internal statically compiled regulatory databaseJohn W. Linville
This patch provides infrastructure for machine translation of the regulatory rules database used by CRDA into a C data structure. It includes code for searching that database as an alternative to dynamic regulatory rules updates via CRDA. Most people should use CRDA instead of this infrastructure, but it provides a better alternative than the WIRELESS_OLD_REGULATORY infrastructure (which can now be removed). Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21mac80211: remove payload alignment warningKalle Valo
The payload alignment warning enabled by MAC80211_DEBUG_PACKET_ALIGNMENT is difficult. To fix it, a firmware change is needed but in most cases that's very difficult. So the benefit from the warning is low and most probably it just creates more confusion for people who just enable all warnings (like it did for me). Remove the unaligned IP payload warning and the kconfig option. But leave the unaligned packet warning, it will be enabled with MAC80211_VERBOSE_DEBUG. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rtl8180: Remove usage of deprecated 'qual'Larry Finger
When building rtl8180, the following warning occurs: CC [M] drivers/net/wireless/rtl818x/rtl8180_dev.o drivers/net/wireless/rtl818x/rtl8180_dev.c: In function ‘rtl8180_handle_rx’: drivers/net/wireless/rtl818x/rtl8180_dev.c:135: warning: ‘qual’ is deprecated (declared at include/net/mac80211.h:562) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rndis_wlan: copy module parameters for bcm4320a devices tooJussi Kivilinna
rndis_wlan didn't copy module parameters for bcm4320a to private structure. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21rndis_wlan: move copy of module parameters to separate functionJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: enable WMMKalle Valo
Everything is ready now and we can enable WMM in mac80211. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: update tx_hdr when aliging skb in txKalle Valo
Before transmission when aligning the buffer to 4-byte bounday, tx_hdr needs to be updated. Otherwise debug logs print false data. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: implement WMMKalle Valo
Now that necessary commands for WMM are implemented, implement queue handling for WMM. But WMM is not enabled yet, only one queue is used. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: implement wl1251_acx_tid_cfg()Kalle Valo
Needed for WMM. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: implement acx_ac_cfg to configure hardware queuesKalle Valo
Needed for WMM. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: use __dev_alloc_skb() on RXKalle Valo
RX is handled in a workqueue therefore allocating for GFP_ATOMIC is overkill and not required. Based on a patch for wl1271 by Luis R. Rodriguez. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: simplify ELP wakeup time calculationKalle Valo
The wakeup time calculation was too complicated, simplify it. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: reduce ELP wakeup timeoutKalle Valo
The original TI driver uses 100 ms timeout ELP wakeup timeout, better to use the same. Otherwise problems with wakeup might get unnoticed. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: fix error handling in wl1251_op_config()Kalle Valo
Not all return values were checked and one exit from function didn't put firmware sleep after the error. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: print a debug message when tx_queue is fullKalle Valo
This debug message was missing and caused incomplete log messages. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wl1251: add tx queue status to debugfsKalle Valo
Sometimes when debugging the state is good info. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21ar9170: fix AC_VIDEO txop parameterChristian Lamparter
This patch fixes a rather embarrassing typo. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21ar9170: small misc changesChristian Lamparter
This patch aggregates a bunch of small random changes that won't fit really anywhere else properly. 1. move tid-locating macro into a separate function. 2. remove redundant NULL check. 3. add modulation mask definition Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21ar9170: remove redundant frame flagsChristian Lamparter
The flags in question were once useful for debugging. Time has passed and now they do nothing more than duplicating txinfo->flags. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21ar9170: improve network latencyChristian Lamparter
AR9170 has the bad habit of choking when traffic builds up. Tests have shown that this can partially be attributed to a huge buildup of backlogged frames. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21ar9170: remove dead definitionsChristian Lamparter
This patch removes dead infrastructure which was meant for an out-of-tree rate control algorithm. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21ath9k_hw: remove unused ath9k_hw_devname() and ath9k_hw_probe()Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21mac80211: trace interface nameJohannes Berg
It's not all that useful to have the vif/sdata pointer, we'd rather refer to the interfaces by their name. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21mac80211: reduce reliance on netdevJohannes Berg
For bluetooth 3, we will most likely not have a netdev for a virtual interface (sdata), so prepare for that by reducing the reliance on having a netdev. This patch moves the name and address fields into the sdata struct and uses them from there all over. Some work is needed to keep them sync'ed, but that's not a lot of work and in slow paths anyway. In doing so, this also reduces the number of pointer dereferences in many places, because of things like sdata->dev->dev_addr becoming sdata->vif.addr. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21mac80211: make station management completely depend on vifJohannes Berg
The station management currently uses the virtual interface, but you cannot add the same station to multiple virtual interfaces if you're communicating with it in multiple ways. This restriction should be lifted so that in the future we can, for instance, support bluetooth 3 with an access point that mac80211 is already associated to. We can do that by requiring all sta_info_get users to provide the virtual interface and making the RX code aware that an address may match more than one station struct. Thanks to the previous patches this one isn't all that large and except for the RX and TX status paths changes has low complexity. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wireless: hostap, fix oops due to early probing interruptColin Ian King
BugLink: https://bugs.launchpad.net/ubuntu/+bug/254837 Spurious shared interrupts or early probing interrupts can cause the hostap interrupt handler to oops before the driver has fully configured the IO base port addresses. In some cases the oops can be because the hardware shares an interrupt line, on other cases it is due to a race condition between probing for the hardware and configuring the IO base port. The latter occurs because the probing is required to determin the hardware port address which is only determined when the probe can interrupt the hardware (catch 22). This patch catches this pre-configured condition to avoid the oops. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wireless: report reasonable bitrate for MCS rates through wextJohn W. Linville
Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates through the wireless extensions interface. However, nl80211 was converting MCS rates into a reasonable bitrate number. This patch moves the nl80211 code to cfg80211 where it is now shared between both the nl80211 interface and the wireless extensions interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-08sctp: fix compile error due to sysctl mismergeLinus Torvalds
I messed up the merge in d7fc02c7bae7b1cf69269992cf880a43a350cdaa, where the conflict in question wasn't just about CTL_UNNUMBERED being removed, but the 'strategy' field is too (sysctl handling is now done through the /proc interface, with no duplicate protocols for reading the data). Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-08Merge branch 'for-2.6.33' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block: (113 commits) cfq-iosched: Do not access cfqq after freeing it block: include linux/err.h to use ERR_PTR cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit blkio: Allow CFQ group IO scheduling even when CFQ is a module blkio: Implement dynamic io controlling policy registration blkio: Export some symbols from blkio as its user CFQ can be a module block: Fix io_context leak after failure of clone with CLONE_IO block: Fix io_context leak after clone with CLONE_IO cfq-iosched: make nonrot check logic consistent io controller: quick fix for blk-cgroup and modular CFQ cfq-iosched: move IO controller declerations to a header file cfq-iosched: fix compile problem with !CONFIG_CGROUP blkio: Documentation blkio: Wait on sync-noidle queue even if rq_noidle = 1 blkio: Implement group_isolation tunable blkio: Determine async workload length based on total number of queues blkio: Wait for cfq queue to get backlogged if group is empty blkio: Propagate cgroup weight updation to cfq groups blkio: Drop the reference to queue once the task changes cgroup blkio: Provide some isolation between groups ...
2009-12-08Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (54 commits) Revert "pata_sis: Implement MWDMA for the UDMA 133 capable chips" libata: Clarify ata_set_lba_range_entries function libata: Report zeroed read after TRIM and max discard size pata_hpt3x2n: fix overclocked MWDMA0 timing pata_it8213: MWDMA0 is unsupported [libata] MWDMA0 is unsupported on PIIX-like PATA controllers pata_via: clear UDMA transfer mode bit for PIO and MWDMA pata_sis: Power Management fix pata_rz1000: Power Management fix pata_radisys: fix UDMA handling pata_ns87415: Power Management fix pata_marvell: fix marvell_pre_reset() documentation pata_legacy: add pointers to QDI65x0 documentation pata_legacy: fix access to control register for QDI6580 pata_legacy: fix QDI6580DP support pata_it8213: fix it8213_pre_reset() documentation pata_it8213: fix wrong MWDMA timings being programmed pata_it8213: fix PIO2 underclocking pata_it8213: fix wrong PIO timings being programmed pata_it8213: fix UDMA handling ...
2009-12-08Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits) arm: omap: Add omap3_defconfig AM35xx: Defconfig for AM3517 EVM board AM35xx: Add support for AM3517 EVM board omap: 3630sdp: defconfig creation omap: 3630sdp: introduce 3630 sdp board support omap3: Add defconfig for IGEP v2 board omap3: Add minimal IGEP v2 support omap3: Add CompuLab CM-T35 defconfig omap3: Add CompuLab CM-T35 board support omap3: rx51: Add wl1251 wlan driver support omap3: rx51: Add SDRAM init omap1: Add default kernel configuration for Herald omap1: Add board support and LCD for HTC Herald omap: zoom2: update defconfig for LL_DEBUG_NONE omap: zoom3: defconfig creation omap3: zoom: Introduce zoom3 board support omap3: zoom: Drop i2c-1 speed to 2400 omap3: zoom: rename zoom2 name to generic zoom omap3: zoom: split board file for software reuse omap3evm: MIgrate to smsc911x ethernet driver ... Fix trivial conflict (two unrelated config options added next to each other) in arch/arm/mach-omap2/Makefile
2009-12-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: parport_mfc3 - Not makes it a bool before the comparison. m68k: don't export static inline functions fbdev: atafb - add palette register check m68k: Remove the BKL from sys_execve m68k: Cleanup linker scripts using new linker script macros. m68k: Make thread_info.h usable from assembly. m68knommu: define arch_has_single_step() and friends m68k: ptrace fixes m68k: use generic code for ptrace requests rtc: Add an RTC driver for the Ricoh RP5C01 rtc: Add an RTC driver for the Oki MSM6242
2009-12-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: Use hweight32 firewire: cdev: reduce stack usage by ioctl_dispatch firewire: ohci: 0 may be a valid DMA address firewire: core: WARN on wrong usage of core transaction functions firewire: core: optimize Topology Map creation firewire: core: clarify generate_config_rom usage firewire: optimize config ROM creation firewire: cdev: normalize variable names firewire: normalize style of queue_work wrappers firewire: cdev: fix memory leak in an error path
2009-12-08Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (272 commits) Fix soc_common PCMCIA configuration ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_request ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driver ARM: 5825/1: SA1100: h3600: update defconfig ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100 ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keys ARM: 5822/1: SA1100: h3100/h3600: clean up #includes ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplates ARM: 5820/1: SA1100: h3100/h3600: split h3600.c ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitions ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitions ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlers ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driver ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpers ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolib ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pins ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.h ...
2009-12-08Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-stub: Documentation update i2c-stub: Allow user to disable some commands i2c-stub: Implement I2C block support i2c: Refactor for_each callbacks i2c-i801: Retry on lost arbitration i2c: Remove big kernel lock from i2cdev_open ics932s401: Clean up detect function i2c: Simplify i2c_detect_address i2c: Drop probe, ignore and force module parameters i2c: Add missing __devinit markers to old i2c adapter drivers i2c: Bus drivers don't have to support I2C_M_REV_DIR_ADDR i2c: Prevent priority inversion on top of bus lock i2c-voodoo3: Delete i2c-powermac: Drop temporary name buffer i2c-powermac: Include the i2c_adapter in struct pmac_i2c_bus i2c-powermac: Log errors i2c-powermac: Refactor i2c_powermac_smbus_xfer i2c-powermac: Reject unsupported I2C transactions i2c/chips: Move ds1682 to drivers/misc
2009-12-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Add flag for devices capable of generating run-time wake-up events PM / Runtime: Remove unnecessary braces in __pm_runtime_set_status() PM / Runtime: Make documentation of runtime_idle() agree with the code PM / Runtime: Ensure timer_expires is nonzero in pm_schedule_suspend() PM / Runtime: Use deferred_resume flag in pm_request_resume PM / Runtime: Export the PM runtime workqueue PM / Runtime: Fix lockdep warning in __pm_runtime_set_status() PM / Hibernate: Swap, use KERN_CONT PM / Hibernate: Shift remaining code from swsusp.c to hibernate.c PM / Hibernate: Move swap functions to kernel/power/swap.c. PM / freezer: Don't get over-anxious while waiting
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-01 15:57:53 +0000