aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-07partitions: add ->set_capacity block device methodBartlomiej Zolnierkiewicz
* Add ->set_capacity block device method and use it in rescan_partitions() to attempt enabling native capacity of the device upon detecting the partition which exceeds device capacity. * Add GENHD_FL_NATIVE_CAPACITY flag to try limit attempts of enabling native capacity during partition scan. Together with the consecutive patch implementing ->set_capacity method in ide-gd device driver this allows automatic disabling of Host Protected Area (HPA) if any partitions overlapping HPA are detected. Cc: Robert Hancock <hancockrwd@gmail.com> Cc: Frans Pop <elendil@planet.nl> Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Emphatically-Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07partitions: warn about the partition exceeding device capacityBartlomiej Zolnierkiewicz
The current warning message says only about the kernel's action taken without mentioning the underlying reason behind it. Noticed-by: Robert Hancock <hancockrwd@gmail.com> Cc: Frans Pop <elendil@planet.nl> Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl> Cc: Al Viro <viro@zeniv.linux.org.uk> Emphatically-Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07pdc202xx_old: fix resetproc() methodSergei Shtylyov
pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while that function actually twiddles the single, shared software reset bit -- the net effect is a duplicated reset and horrendous 4 second delay happening not only on a channel reset but also when dma_lost_irq() and dma_clear() methods are called. Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(), and move it before the actual reset... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07pdc202xx_old: fix 'pdc20246_dma_ops'Sergei Shtylyov
Commit ac95beedf8bc97b24f9540d4da9952f07221c023 (ide: add struct ide_port_ops (take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq() methods to call the driver's resetproc() method regardless of whether it was defined for this specific controller while it hadn't been defined and hence called for PDC20246. So the dma_clear() method, the successor of dma_timeout(), shouldn't exist and the dma_lost_irq() method should be standard for PDC20246. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-30ide_pci_generic: add quirk for Netcell ATA RAIDBartlomiej Zolnierkiewicz
We need to explicitly mark words 85-87 as valid ones since firmware doesn't do it. This should fix support for LBA48 and FLUSH CACHE [EXT] command which stopped working after we applied more strict checking of identify words in: commit 942dcd85bf8edf38cdc3745306ca250684d99a61 ("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()") and commit 4b58f17d7c45a8e5f4acda641bec388398b9c0fa ("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()") Reported-and-tested-by: "Trevor Hemsley" <trevor.hemsley@ntlworld.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22via82cxxx: Add VIA VX855 PCI Device IDHarald Welte
This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Bruce Chang <BruceChang@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: report timeouts in ide_busy_sleep()Bartlomiej Zolnierkiewicz
* change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: improve failed opcode reportingBartlomiej Zolnierkiewicz
Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix printk() levels in ide_dump_ata[pi]_error()Bartlomiej Zolnierkiewicz
Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix OOPS during ide-cd error recoveryBartlomiej Zolnierkiewicz
On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Reported-and-tested-by: Modestas Vainius <modestas@vainius.eu> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)Bartlomiej Zolnierkiewicz
Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk: commit 8588a2b732928b343233af9b1855705b8286bed4 ("ide: add SH-S202J to ivb_list[]") We also later added support for more such devices in: commit e97564f362a93f8c248246c19828895950341252 ("ide: More TSST drives with broken cable detection") and in: commit 3ced5c49bd2d1f2c7f769e3a54385883de63a652 ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]") It turns out that such devices lack cable detection altogether (which in turn results in incorrect detection of 40-wire cables by our current cable detection strategy) so always handle them by trusting host-side cable detection only. v2: Model detection fixup from Martin. Reported-and-tested-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16piix: The Sony TZ90 needs the cable type hardcodingAlan Cox
The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Jonathan E. Snow <jesnow@uh.edu> [bart: port it from ata_piix to piix and give reporter the proper credit] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16icside: register second channel of version 6 PCBSergei Shtylyov
The second IDE channel of version 6 PCB is not being registered anymore since the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host (take 3)). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16ide-tape: remove back-to-back REQUEST_SENSE detectionTejun Heo
Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-30ide-cd: fix REQ_QUIET tests in cdrom_decode_statusBorislav Petkov
Original patch (dfa4411cc3a690011cab90e9a536938795366cf9) was buggy. This is a more proper fix which introduces blk_rq_quiet() macro alleviating the need for dumb, too short caching variables. Thanks to Helge Deller and Bart for debugging this. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reported-and-tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-23MAINTAINERS: update IDE entryBartlomiej Zolnierkiewicz
By a popular demand quilt tree was replaced by a git one. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-23palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixupBartlomiej Zolnierkiewicz
Remove superfluous commas and add missing whitespaces. Noticed-by: Joe Perches <joe@perches.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-23palm_bk3710: those registers/bitfields don't existDavid Brownell
Bugfixes noted by checking the code against the controller documentation (TI document number SPRUE21): - Remove declarations for eight non-existent registers (!); and remove accesses to two of them. - Remove access to various non-existent bitfields in some of the registers which *do* exist (those fields must-be-zero). - Provide comment to replace bogus reset logic (removed above, it relied on non-existent bitfields). Resets require GPIO help; this driver doesn't currently know about that. With some minor cleanup: relocate a comment, avoid an extra lookup of the PIO timings. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22mediabay: fix build for CONFIG_BLOCK=nBartlomiej Zolnierkiewicz
On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote: > Observed the following build error: > --- > CC drivers/macintosh/mediabay.o > In file included from drivers/macintosh/mediabay.c:21: > include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete > type > make[2]: *** [drivers/macintosh/mediabay.o] Error 1 > make[1]: *** [drivers/macintosh] Error 2 > make: *** [drivers] Error 2 > --- mediabay shouldn't include <linux/ide.h> unconditionally so remove the superfluous include from mediabay.c (<asm/mediabay.h> will pull <linux/ide.h> in for CONFIG_BLK_DEV_IDE_PMAC=y). Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22ide: Stop disks on reboot for laptop which cuts powerBruno Prémont
My laptop (Acer Travelmate 660) always cuts the power when rebooting which causes the disk to emergency-park it's head. Add a dmi check to stop disk as for shutdown on this laptop. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22ide-cd: fix kernel crash on hppa regressionHelge Deller
With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture due to ide-cd when udev creates the device nodes at startup: Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024) IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0 IIR: 4ab30048 ISR: 00000000 IOR: 00000024 CPU: 0 CR30: 8ed34000 CR31: ffff55ff ORIG_R28: 00000000 IAOQ[0]: ide_complete_rq+0x2c/0x70 IAOQ[1]: ide_complete_rq+0x30/0x70 RP(r2): cdrom_newpc_intr+0x178/0x46c Backtrace: [<1035c608>] cdrom_newpc_intr+0x178/0x46c [<1034c494>] ide_intr+0x1b0/0x214 [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<102f7864>] superio_interrupt+0x88/0xbc [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<10112efc>] do_cpu_irq_mask+0x9c/0xd0 [<10116068>] intr_return+0x0/0x4 This crash seems to happen due to an uninitialized variable "rc". The compiler even warns about that: CC drivers/ide/ide-cd.o /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr': /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function After applying the trivial patch below, which just initializes the variable to zero, the kernel doesn't crash any longer: Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events... hda: command error: status=0x51 { DriveReady SeekComplete Error } hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown done. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Linus <torvalds@linux-foundation.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22palm_bk3710: UDMA performance fixDavid Brownell
Fix UDMA throughput bug: tCYC averages t2CYCTYP/2, but the code previously assumed it was the same as t2CYCTYP. (That is, it was using just one clock edge, not both.) Move the table's type declaration so it's adjacent to the table, making it more clear what those numbers mean. On one system this change increased throughput by almost 4x: UDMA/66 sometimes topped 23 MB/sec (on a drive known to do much better). On another system it was around a 10% win (UDMA/66 up to 7+ MB/sec). The difference might be caused by the ratio between memory and IDE clocks. In the system with large speedup, this was exactly 2 (as a workaround for a rev 1.1 silicon bug). The other system used a more standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch might have some issues, they're not unheard-of. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18cs5536: define dma_sff_read_status() methodSergei Shtylyov
The driver somehow got merged with the initializer for the dma_sff_read_status() method missing which caused kernel panic on bootup. This should fix the kernel.org bug #13026... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reported-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18ide: fix barriers supportBartlomiej Zolnierkiewicz
Freeing non-slab objects is bad and results in an oops. Fix it. Reported-and-tested-by: Andrew Price <andy@andrewprice.me.uk> Cc: Theodore Tso <tytso@mit.edu> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18ide: Remove void castsJack Stone
Remove uneeded void casts Signed-off-by: Jack Stone <jwjstone@fastmail.fm> Cc: jeff@garzik.org Cc: kernel-janitors@vger.kernel.org Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18hpt366: use ATA_DMA_* constantsSergei Shtylyov
Use ATA_DMA_* constants instead of the bare numbers for the BMIDE register bits. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18hpt366: fix HPT370 DMA timeoutsSergei Shtylyov
The big driver change in 2.4.19-rc1 introduced a regression for many HPT370[A] chips -- DMA stopped to work completely, only causing endless timeouts... The culprit has been identified (at last!): it turned to be the code resetting the DMA state machine before each transfer. Stop doing it now as this counter- measure has clearly caused more harm than good. This should fix the kernel.org bug #7703. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-17Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] fix build error on drivers/ata/pata_legacy.c pata_via: Cache and rewrite the device bit sata_mv: workaround for multi_count errata sata24 sata_mv: tidy up qc->tf usage in qc_prep() functions
2009-04-17[libata] fix build error on drivers/ata/pata_legacy.cZhenwen Xu
fix those errors: drivers/ata/pata_legacy.c: In function ‘pdc_data_xfer_vlb’: drivers/ata/pata_legacy.c:289: error: ‘ap’ undeclared (first use in this function) drivers/ata/pata_legacy.c:289: error: (Each undeclared identifier is reported only once drivers/ata/pata_legacy.c:289: error: for each function it appears in.) drivers/ata/pata_legacy.c: At top level: drivers/ata/pata_legacy.c:869: error: ‘ATA_PFLAG_PIO32_CHANGE’ undeclared here (not in a +function) make[2]: *** [drivers/ata/pata_legacy.o] Error 1 make[1]: *** [drivers/ata] Error 2 Signed-off-by: Zhenwen Xu <helight.xu@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-17pata_via: Cache and rewrite the device bitAlan Cox
Some VIA chipsets will reset the DEV bit after IEN changes on ctl. Our optimised write path avoids doing this but we need to remove the optimisation on these devices. [Identified and some original patches proposed by Josehn Chan @ VIA but discussion then all ground to a halt so given a test case I dug it back out] Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk Tested-by: Christoph Bisping (bug #13086) Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-17sata_mv: workaround for multi_count errata sata24Mark Lord
Workaround for errata SATA#24 in sata_mv. This errata affects WRITE_MULTI* commands when the device multi_count produces a DRQ block size >= 4Kbytes. We work around it here by converting such operations into ordinary PIO_WRITEs instead. Note that this might result in a PIO FUA write unavoidably being converted into a non-FUA write. In practice, any system using FUA is also going to be using DMA rather than PIO, so this shouldn't affect anyone in the real world. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-17sata_mv: tidy up qc->tf usage in qc_prep() functionsMark Lord
Tidy up qc->tf accesses in the mv_qc_prep() functions. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (43 commits) staging: slicoss: update README otus/zdusb.c: additional USB idnetifier Staging: go7007: fix build issues Staging: sxg: Fix leaks and checksum errors in transmit code path Staging: sxg: Fix sleep in atomic context warning while loading driver Staging: sxg: Use correct queue_id for transmitting non-TCP packets Staging: sxg: Fire watchdog timer at end of open routine to change the link Staging: Pohmelfs: Add load balancing between network states with the same priority. Staging: Pohmelfs: Added IO permissions and priorities. Staging: Pohmelfs: Added ->show_stats() callback. Staging: Pohmelfs: Drop ftrans debugging code. Staging: Pohmelfs: Use wait_on_page_timeout when waiting for remote directory sync instead of hardcoded 25 seconds. Staging: Pohmelfs: Reduce debugging noise about non-existing objects. Staging: Pohmelfs: Sync fs before killing it, since dentry cache is shrunk before writeback is invoked via generic_shutdown_super() Staging: Pohmelfs: Extend remount option. Staging: Pohmelfs: Set NETFS_INODE_REMOTE_SYNCED and clear NETFS_INODE_OWNED bits in the root inode. Staging: Pohmelfs: Added 'need_lock' variable into debug print. Staging: Pohmelfs: Disable read lock in pohmelfs_getattr(). Staging: Pohmelfs: Move parent lock to the place where we really have to send a lookup request to the server. Staging: pohmelfs: Populate dentry cache when receiving the new readdir entry. ...
2009-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: UIO: fix specific device driver missing statement for depmod Driver core: remove pr_fmt() from dynamic_dev_dbg() printk driver core: prevent device_for_each_child from oopsing dynamic debug: resurrect old pr_debug() semantics as pr_devel() Driver Core: early platform driver proc: mounts_poll() make consistent to mdstat_poll sysfs: sysfs poll keep the poll rule of regular file. driver core: allow non-root users to listen to uevents driver core: fix driver_match_device sysfs: don't use global workqueue in sysfs_schedule_callback()
2009-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits) WUSB: correct format of wusb_chid sysfs file WUSB: fix oops when completing URBs for disconnected devices WUSB: disconnect all devices when stopping a WUSB HCD USB: whci-hcd: check return value of usb_hcd_link_urb_to_ep() USB: whci-hcd: provide a endpoint_reset method USB: add reset endpoint operations USB device codes for Motorola phone. usb-storage: fix mistake in Makefile USB: usb-serial ch341: support for DTR/RTS/CTS Revert USB: usb-serial ch341: support for DTR/RTS/CTS USB: musb: fix possible panic while resuming USB: musb: fix isochronous TXDMA (take 2) USB: musb: sanitize clearing TXCSR DMA bits (take 2) USB: musb: bugfixes for multi-packet TXDMA support USB: musb_host, fix ep0 fifo flushing USB: usb-storage: augment unusual_devs entry for Simple Tech/Datafab USB: musb_host, minor enqueue locking fix (v2) USB: fix oops in cdc-wdm in case of malformed descriptors USB: qcserial: Add extra device IDs USB: option: Add ids for D-Link DWM-652 3.5G modem ...
2009-04-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (48 commits) [ARM] S3C24XX: ADC: Check pending queue before freeing adc client [ARM] S3C: Fix ADC driver sparse warning [ARM] Osiris: Fix double initialisation in machine block [ARM] Anubis: Fix sparse warnings for items that should be static [ARM] JIVE: Fix sparse warnings about items which should be static [ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon' [ARM] S3C24XX: Fix sparse error in gpiolib.c [ARM] 5455/1: Fix IRQ noise from VIC code [ARM] 5454/1: ep93xx_eth: fix sparse warnings [ARM] remove .gitignore from include/asm-arm Update MAINTAINERS mxc defconfig updates mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board Fix ifdef in plat-mxc/irc.c MX1ADS: remove I2C ifdefs qong: remove AIPS[12] mappings from machine-specific iotable mx31ads: imoux pins should be passed in as unsigned int MXC: remove orphan imx_init_uart() definition mx31: pin definition for csi ...
2009-04-17Merge branch 'defconfig-s3c2410' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-04-17Merge branch 'v2630-rc2-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-04-17staging: slicoss: update READMEStephen Hemminger
I looked, I gagged, I left Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17otus/zdusb.c: additional USB idnetifierDaniele Napolitano
Provide support for WN111v2 USB 802.11n adapter. Signed-off-by: Daniele Napolitano <dnax88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: go7007: fix build issuesGreg Kroah-Hartman
Now that TUNER_SET_TYPE_ADDR is gone from the tree, the older code kicks in and tries to use TUNER_SET_TYPE, which went away a long time ago. This patch removes all of this logic, as it should not be needed anymore now, and by doing so, fixes the build. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: sxg: Fix leaks and checksum errors in transmit code pathMithlesh Thukral
Fix the transmit function for the following: * Free XmtCmd in the error code path. This use to leak memory in error conditions. * Do pci mapping after the checksum operations are over. They can reallocate the skb at a different location. * Fix UDP checksum errors which were seen in wireshark Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: sxg: Fix sleep in atomic context warning while loading driverMithlesh Thukral
Leave a spinlock before calling request_irq(). request_irq() calls kmalloc which can sleep. This was generating a warning dump while driver is loaded. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: sxg: Use correct queue_id for transmitting non-TCP packetsMithlesh Thukral
Use correct queue_id while transmitting non-TCP packets. They should always use queue 0. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
2009-04-17Staging: sxg: Fire watchdog timer at end of open routine to change the linkMithlesh Thukral
The watchdog timer which updates the link status was not fired at the end of sxg_entry_open(). Add that. Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: Pohmelfs: Add load balancing between network states with the same ↵Evgeniy Polyakov
priority. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: Pohmelfs: Added IO permissions and priorities.Evgeniy Polyakov
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: Pohmelfs: Added ->show_stats() callback.Evgeniy Polyakov
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: Pohmelfs: Drop ftrans debugging code.Evgeniy Polyakov
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17Staging: Pohmelfs: Use wait_on_page_timeout when waiting for remote ↵Evgeniy Polyakov
directory sync instead of hardcoded 25 seconds. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 15:08:14 +0000