aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-09-04dccp: Clean up slow-path input processingGerrit Renker
This patch rearranges the order of statements of the slow-path input processing (i.e. any other state than OPEN), to resolve the following issues. 1. Dependencies: the order of statements now better matches RFC 4340, 8.5, i.e. step 7 is before step 9 (previously 9 was before 7), and parsing options in step 8 (which can consume resources) now comes after step 7. 2. Bug-fix: in state CLOSED, there should not be any sequence number checking or option processing. This is why the test for CLOSED has been moved after the test for LISTEN. 3. As before sequence number checks are omitted if in state LISTEN/REQUEST, due to the note underneath the table in RFC 4340, 7.5.3. 4. Packets are now passed on to Ack Vector / CCID processing only after - step 7 (receive unexpected packets), - step 9 (receive Reset), - step 13 (receive CloseReq), - step 14 (receive Close) and only if the state is PARTOPEN. This simplifies CCID processing: - in LISTEN/CLOSED the CCIDs are non-existent; - in RESPOND/REQUEST the CCIDs have not yet been negotiated; - in CLOSEREQ and active-CLOSING the node has already closed this socket; - in passive-CLOSING the client is waiting for its Reset. In the last case, RFC 4340, 8.3 leaves it open to ignore further incoming data, which is the approach taken here. As a result of (3), CCID processing is now indeed confined to OPEN/PARTOPEN states, i.e. congestion control is performed only on the flow of data packets. This avoids pathological cases of doing congestion control on those messages which set up and terminate the connection. I have done a few checks to see if this creates a problem in other parts of the code. This seems not to be the case; even if there were one, it would be better to fix it than to perform congestion control on Close/Request/Response messages. Similarly for Ack Vectors (as they depend on the negotiated CCID). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04tcp/dccp: Consolidate common code for RFC 3390 conversionGerrit Renker
This patch consolidates the code common to TCP and CCID-2: * TCP uses RFC 3390 in a packet-oriented manner (tcp_input.c) and * CCID-2 uses RFC 3390 in packet-oriented manner (RFC 4341). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Combine the functionality of enqeueing and cloningGerrit Renker
Realising the following call pattern, * first dccp_entail() is called to enqueue a new skb and * then skb_clone() is called to transmit a clone of that skb, this patch integrates both interrelated steps into dccp_entail(). Note: the return value of skb_clone is not checked. It may be an idea to add a warning if this occurs. In both instances, however, a timer is set for retransmission, so that cloning is re-tried via dccp_retransmit_skb(). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Remove wrappers around sk_{reset,stop}_timer()Gerrit Renker
This removes the wrappers around the sk timer functions as it makes the code clearer and not much is gained from using wrappers: the BUG_ON in start_rto_timer will never trigger since that function was called only when * the RTO timer expired (rto_expire, and then timer_pending() is false); * in tx_packet_sent only if !timer_pending() (BUG_ON is redundant here); * previously in new_ack, after stopping the timer (timer_pending() false). One further motive behind this patch is to replace the RTO timer with the icsk retransmission timer, as it is already part of the DCCP socket. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Replace broken RTT estimator with better algorithmGerrit Renker
The current CCID-2 RTT estimator code is in parts broken and lags behind the suggestions in RFC2988 of using scaled variants for SRTT/RTTVAR. That code is replaced by the present patch, which reuses the Linux TCP RTT estimator code - reasons for this code duplication are given below. Further details: ---------------- 1. The minimum RTO of previously one second has been replaced with TCP's, since RFC4341, sec. 5 says that the minimum of 1 sec. (suggested in RFC2988, 2.4) is not necessary. Instead, the TCP_RTO_MIN is used, which agrees with DCCP's concept of a default RTT (RFC 4340, 3.4). 2. The maximum RTO has been set to DCCP_RTO_MAX (64 sec), which agrees with RFC2988, (2.5). 3. De-inlined the function ccid2_new_ack(). 4. Added a FIXME: the RTT is sampled several times per Ack Vector, which will give the wrong estimate. It should be replaced with one sample per Ack. However, at the moment this can not be resolved easily, since - it depends on TX history code (which also needs some work), - the cleanest solution is not to use the `sent' time at all (saves 4 bytes per entry) and use DCCP timestamps / elapsed time to estimated the RTT, which however is non-trivial to get right (but needs to be done). Reasons for reusing the Linux TCP estimator algorithm: ------------------------------------------------------ Some time was spent to find a better alternative, using basic RFC2988 as a first step. Further analysis and experimentation showed that the Linux TCP RTO estimator is superior to a basic RFC2988 implementation. A summary is on http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/ccid2/rto_estimator/ In addition, this estimator fared well in a recent empirical evaluation: Rewaskar, Sushant, Jasleen Kaur and F. Donelson Smith. A Performance Study of Loss Detection/Recovery in Real-world TCP Implementations. Proceedings of 15th IEEE International Conference on Network Protocols (ICNP-07). 2007. Thus there is significant benefit in reusing the existing TCP code. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Simplify dec_pipe and rearming of RTO timerGerrit Renker
This removes the dec_pipe function and improves the way the RTO timer is rearmed when a new acknowledgment comes in. Details and justification for removal: -------------------------------------- 1) The BUG_ON in dec_pipe is never triggered: pipe is only decremented for TX history entries between tail and head, for which it had previously been incremented in tx_packet_sent; and it is not decremented twice for the same entry, since it is - either decremented when a corresponding Ack Vector cell in state 0 or 1 was received (and then ccid2s_acked==1), - or it is decremented when ccid2s_acked==0, as part of the loss detection in tx_packet_recv (and hence it can not have been decremented earlier). 2) Restarting the RTO timer happens for every single entry in each Ack Vector parsed by tx_packet_recv (according to RFC 4340, 11.4 this can happen up to 16192 times per Ack Vector). 3) The RTO timer should not be restarted when all outstanding data has been acknowledged. This is currently done similar to (2), in dec_pipe, when pipe has reached 0. The patch onsolidates the code which rearms the RTO timer, combining the segments from new_ack and dec_pipe. As a result, the code becomes clearer (compare with tcp_rearm_rto()). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Remove redundant sanity testsGerrit Renker
This removes the ccid2_hc_tx_check_sanity function: it is redundant. Details: ======== The tx_check_sanity function performs three tests: 1) it checks that the circular TX list is sorted - in ascending order of sequence number (ccid2s_seq) - and time (ccid2s_sent), - in the direction from `tail' (hctx_seqt) to `head' (hctx_seqh); 2) it ensures that the entire list has the length seqbufc * CCID2_SEQBUF_LEN; 3) it ensures that pipe equals the number of packets that were not marked `acked' (ccid2s_acked) between `tail' and `head'. The following argues that each of these tests is redundant, this can be verified by going through the code. (1) is not necessary, since both time and GSS increase from one packet to the next, so that subsequent insertions in tx_packet_sent (which advance the `head' pointer) will be in ascending order of time and sequence number. In (2), the length of the list is always equal to seqbufc times CCID2_SEQBUF_LEN (set to 1024) unless allocation caused an earlier failure, because: * at initialisation (tx_init), there is one chunk of size 1024 and seqbufc=1; * subsequent calls to tx_alloc_seq take place whenever head->next == tail in tx_packet_sent; then a new chunk of size 1024 is inserted between head and tail, and seqbufc is incremented by one. To show that (3) is redundant requires looking at two cases. The `pipe' variable of the TX socket is incremented only in tx_packet_sent, and decremented in tx_packet_recv. When head == tail (TX history empty) then pipe should be 0, which is the case directly after initialisation and after a retransmission timeout has occurred (ccid2_hc_tx_rto_expire). The first case involves parsing Ack Vectors for packets recorded in the live portion of the buffer, between tail and head. For each packet marked by the receiver as received (state 0) or ECN-marked (state 1), pipe is decremented by one, so for all such packets the BUG_ON in tx_check_sanity will not trigger. The second case is the loss detection in the second half of tx_packet_recv, below the comment "Check for NUMDUPACK". The first while-loop here ensures that the sequence number of `seqp' is either above or equal to `high_ack', or otherwise equal to the highest sequence number sent so far (of the entry head->prev, as head points to the next unsent entry). The next while-loop ("while (1)") counts the number of acked packets starting from that position of seqp, going backwards in the direction from head->prev to tail. If NUMDUPACK=3 such packets were counted within this loop, `seqp' points to the last acknowledged packet of these, and the "if (done == NUMDUPACK)" block is entered next. The while-loop contained within that block in turn traverses the list backwards, from head to tail; the position of `seqp' is saved in the variable `last_acked'. For each packet not marked as `acked', a congestion event is triggered within the loop, and pipe is decremented. The loop terminates when `seqp' has reached `tail', whereupon tail is set to the position previously stored in `last_acked'. Thus, between `last_acked' and the previous position of `tail', - pipe has been decremented earlier if the packet was marked as state 0 or 1; - pipe was decremented if the packet was not marked as acked. That is, pipe has been decremented by the number of packets between `last_acked' and the previous position of `tail'. As a consequence, pipe now again reflects the number of packets which have not (yet) been acked between the new position of tail (at `last_acked') and head->prev, or 0 if head==tail. The result is that the BUG_ON condition in check_sanity will also not be triggered, hence the test (3) is also redundant. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Stop pollingGerrit Renker
This updates CCID2 to use the CCID dequeuing mechanism, converting from previous constant-polling to a now event-driven mechanism. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Refine the wait-for-ccid mechanismGerrit Renker
This extends the existing wait-for-ccid routine so that it may be used with different types of CCID. It further addresses the problems listed below. The code looks if the write queue is non-empty and grants the TX CCID up to `timeout' jiffies to drain the queue. It will instead purge that queue if * the delay suggested by the CCID exceeds the time budget; * a socket error occurred while waiting for the CCID; * there is a signal pending (eg. annoyed user pressed Control-C); * the CCID does not support delays (we don't know how long it will take). D e t a i l s [can be removed] ------------------------------- DCCP's sending mechanism functions a bit like non-blocking I/O: dccp_sendmsg() will enqueue up to net.dccp.default.tx_qlen packets (default=5), without waiting for them to be released to the network. Rate-based CCIDs, such as CCID3/4, can impose sending delays of up to maximally 64 seconds (t_mbi in RFC 3448). Hence the write queue may still contain packets when the application closes. Since the write queue is congestion-controlled by the CCID, draining the queue is also under control of the CCID. There are several problems that needed to be addressed: 1) The queue-drain mechanism only works with rate-based CCIDs. If CCID2 for example has a full TX queue and becomes network-limited just as the application wants to close, then waiting for CCID2 to become unblocked could lead to an indefinite delay (i.e., application "hangs"). 2) Since each TX CCID in turn uses a feedback mechanism, there may be changes in its sending policy while the queue is being drained. This can lead to further delays during which the application will not be able to terminate. 3) The minimum wait time for CCID3/4 can be expected to be the queue length times the current inter-packet delay. For example if tx_qlen=100 and a delay of 15 ms is used for each packet, then the application would have to wait for a minimum of 1.5 seconds before being allowed to exit. 4) There is no way for the user/application to control this behaviour. It would be good to use the timeout argument of dccp_close() as an upper bound. Then the maximum time that an application is willing to wait for its CCIDs to can be set via the SO_LINGER option. These problems are addressed by giving the CCID a grace period of up to the `timeout' value. The wait-for-ccid function is, as before, used when the application (a) has read all the data in its receive buffer and (b) if SO_LINGER was set with a non-zero linger time, or (c) the socket is either in the OPEN (active close) or in the PASSIVE_CLOSEREQ state (client application closes after receiving CloseReq). In addition, there is a catch-all case by calling __skb_queue_purge() after waiting for the CCID. This is necessary since the write queue may still have data when (a) the host has been passively-closed, (b) abnormal termination (unread data, zero linger time), (c) wait-for-ccid could not finish within the given time limit. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Extend CCID packet dequeueing interfaceGerrit Renker
This extends the packet dequeuing interface of dccp_write_xmit() to allow 1. CCIDs to take care of timing when the next packet may be sent; 2. delayed sending (as before, with an inter-packet gap up to 65.535 seconds). The main purpose is to take CCID2 out of its polling mode (when it is network- limited, it tries every millisecond to send, without interruption). The interface can also be used to support other CCIDs. The mode of operation for (2) is as follows: * new packet is enqueued via dccp_sendmsg() => dccp_write_xmit(), * ccid_hc_tx_send_packet() detects that it may not send (e.g. window full), * it signals this condition via `CCID_PACKET_WILL_DEQUEUE_LATER', * dccp_write_xmit() returns without further action; * after some time the wait-condition for CCID becomes true, * that CCID schedules the tasklet, * tasklet function calls ccid_hc_tx_send_packet() via dccp_write_xmit(), * since the wait-condition is now true, ccid_hc_tx_packet() returns "send now", * packet is sent, and possibly more (since dccp_write_xmit() loops). Code reuse: the taskled function calls dccp_write_xmit(), the timer function reduces to a wrapper around the same code. If the tasklet finds that the socket is locked, it re-schedules the tasklet function (not the tasklet) after one jiffy. Changed DCCP_BUG to dccp_pr_debug when transmit_skb returns an error (e.g. when a local qdisc is used, NET_XMIT_DROP=1 can be returned for many packets). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Return-value convention of hc_tx_send_packet()Gerrit Renker
This patch reorganises the return value convention of the CCID TX sending function, to permit more flexible schemes, as required by subsequent patches. Currently the convention is * values < 0 mean error, * a value == 0 means "send now", and * a value x > 0 means "send in x milliseconds". The patch provides symbolic constants and a function to interpret return values. In addition, it caps the maximum positive return value to 0xFFFF milliseconds, corresponding to 65.535 seconds. This is possible since in CCID-3 the maximum inter-packet gap is t_mbi = 64 sec. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Separate option parsing from CCID processingGerrit Renker
This patch replaces an almost identical replication of code: large parts of dccp_parse_options() re-appeared as ccid2_ackvector() in ccid2.c. Apart from the duplication, this caused two more problems: 1. CCIDs should not need to be concerned with parsing header options; 2. one can not assume that Ack Vectors appear as a contiguous area within an skb, it is legal to insert other options and/or padding in between. The current code would throw an error and stop reading in such a case. The patch provides a new data structure and associated list housekeeping. Only small changes were necessary to integrate with CCID-2: data structure initialisation, adapt list traversal routine, and add call to the provided cleanup routine. The latter also lead to fixing the following BUG: CCID-2 so far ignored Ack Vectors on all packets other than Ack/DataAck, which is incorrect, since Ack Vectors can be present on any packet that has an Ack field. Details: -------- * received Ack Vectors are parsed by dccp_parse_options() alone, which passes the result on to the CCID-specific routine ccid_hc_tx_parse_options(); * CCIDs interested in using/decoding Ack Vector information will add code to fetch parsed Ack Vectors via this interface; * a data structure, `struct dccp_ackvec_parsed' is provided as interface; * this structure arranges Ack Vectors of the same skb into a FIFO order; * a doubly-linked list is used to keep the required FIFO code small. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Remove old infrastructureGerrit Renker
This removes * functions for which updates have been provided in the preceding patches and * the @av_vec_len field - it is no longer necessary since the buffer length is now always computed dynamically; * conditional debugging code (CONFIG_IP_DCCP_ACKVEC). The reason for removing the conditional debugging code is that Ack Vectors are an almost inevitable necessity - RFC 4341 says that for CCID-2, Ack Vectors must be used. Furthermore, the code would be only interesting for coding - after some extensive testing with this patch set, having the debug code around is no longer of real help. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Schedule Sync as out-of-band mechanismGerrit Renker
The problem with Ack Vectors is that i) their length is variable and can in principle grow quite large, ii) it is hard to predict exactly how large they will be. Due to the second point it seems not a good idea to reduce the MPS; in particular when on average there is enough room for the Ack Vector and an increase in length is momentarily due to some burst loss, after which the Ack Vector returns to its normal/average length. The solution taken by this patch is to subtract a minimum-expected Ack Vector length from the MPS (previous patch), and to defer any larger Ack Vectors onto a separate Sync - but only if indeed there is no space left on the skb. This patch provides the infrastructure to schedule Sync-packets for transporting (urgent) out-of-band data. Its signalling is quicker than scheduling an Ack, since it does not need to wait for new application data. It can thus serve other parts of the DCCP code as well. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Consolidate Ack-Vector processing within main DCCP moduleGerrit Renker
This aggregates Ack Vector processing (handling input and clearing old state) into one function, for the following reasons and benefits: * all Ack Vector-specific processing is now in one place; * duplicated code is removed; * ensuring sanity: from an Ack Vector point of view, it is better to clear the old state first before entering new state; * Ack Event handling happens mostly within the CCIDs, not the main DCCP module. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Update code for the Ack Vector input/registration routineGerrit Renker
This patch uupdates the code which registers new packets as received, using the new circular buffer interface. It contributes a new algorithm which * supports both tail/head pointers and buffer wrap-around and * deals with overflow (head/tail move in lock-step). The updated code is also partioned differently, into 1. dealing with the empty buffer, 2. adding new packets into non-empty buffer, 3. reserving space when encountering a `hole' in the sequence space, 4. updating old state and deciding when old state is irrelevant. Protection against large burst losses: With regard to (3), it is too costly to reserve space when there are large bursts of losses. When bursts get too large, the code does no longer reserve space and just fills in cells normally. This measure reduces space consumption by a factor of 63. The code reuses in part the previous implementation by Arnaldo de Melo. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Algorithm to update buffer stateGerrit Renker
This provides a routine to consistently update the buffer state when the peer acknowledges receipt of Ack Vectors; updating state in the list of Ack Vectors as well as in the circular buffer. While based on RFC 4340, several additional (and necessary) precautions were added to protect the consistency of the buffer state. These additions are essential, since analysis and experience showed that the basic algorithm was insufficient for this task (which lead to problems that were hard to debug). The algorithm now * deals with HC-sender acknowledging to HC-receiver and vice versa, * keeps track of the last unacknowledged but received seqno in tail_ackno, * has special cases to reset the overflow condition when appropriate, * is protected against receiving older information (would mess up buffer state). Note: The older code performed an unnecessary step, where the sender cleared Ack Vector state by parsing the Ack Vector received by the HC-receiver. Doing this was entirely redundant, since * the receiver always puts the full acknowledgment window (groups 2,3 in 11.4.2) into the Ack Vectors it sends; hence the HC-receiver is only interested in the highest state that the HC-sender received; * this means that the acknowledgment number on the (Data)Ack from the HC-sender is sufficient; and work done in parsing earlier state is not necessary, since the later state subsumes the earlier one (see also RFC 4340, A.4). This older interface (dccp_ackvec_parse()) is therefore removed. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Implementation of circular Ack Vector buffer with overflow handlingGerrit Renker
This completes the implementation of a circular buffer for Ack Vectors, by extending the current (linear array-based) implementation. The changes are: (a) An `overflow' flag to deal with the case of overflow. As before, dynamic growth of the buffer will not be supported; but code will be added to deal robustly with overflowing Ack Vector buffers. (b) A `tail_seqno' field. When naively implementing the algorithm of Appendix A in RFC 4340, problems arise whenever subsequent Ack Vector records overlap, which can bring the entire run length calculation completely out of synch. (This is documented on http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/\ ack_vectors/tracking_tail_ackno/ .) (c) The buffer lengthi is now computed dynamically (i.e. current fill level), as the span between head to tail. As a result, dccp_ackvec_pending() is now simpler - the #ifdef is no longer necessary since buf_empty is always true when IP_DCCP_ACKVEC is not configured. Note on overflow handling: ------------------------- The Ack Vector code previously simply started to drop packets when the Ack Vector buffer overflowed. This means that the userspace application will not be able to receive, only because of an Ack Vector storage problem. Furthermore, overflow may be transient, so that applications may later recover from the overflow. Recovering from dropped packets is more difficult (e.g. video key frames). Hence the patch uses a different policy: when the buffer overflows, the oldest entries are subsequently overwritten. This has a higher chance of recovery. Details are on http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/ack_vectors/ Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Separate internals of Ack Vectors from option-parsing codeGerrit Renker
This patch * separates Ack Vector housekeeping code from option-insertion code; * shifts option-specific code from ackvec.c into options.c; * introduces a dedicated routine to take care of the Ack Vector records; * simplifies the dccp_ackvec_insert_avr() routine: the BUG_ON was redundant, since the list is automatically arranged in descending order of ack_seqno. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Ack Vector interface clean-upGerrit Renker
This patch brings the Ack Vector interface up to date. Its main purpose is to lay the basis for the subsequent patches of this set, which will use the new data structure fields and routines. There are no real algorithmic changes, rather an adaptation: (1) Replaced the static Ack Vector size (2) with a #define so that it can be adapted (with low loss / Ack Ratio, a value of 1 works, so 2 seems to be sufficient for the moment) and added a solution so that computing the ECN nonce will continue to work - even with larger Ack Vectors. (2) Replaced the #defines for Ack Vector states with a complete enum. (3) Replaced #defines to compute Ack Vector length and state with general purpose routines (inlines), and updated code to use these. (4) Added a `tail' field (conversion to circular buffer in subsequent patch). (5) Updated the (outdated) documentation for Ack Vector struct. (6) All sequence number containers now trimmed to 48 bits. (7) Removal of unused bits: * removed dccpav_ack_nonce from struct dccp_ackvec, since this is already redundantly stored in the `dccpavr_ack_nonce' (of Ack Vector record); * removed Elapsed Time for Ack Vectors (it was nowhere used); * replaced semantics of dccpavr_sent_len with dccpavr_ack_runlen, since the code needs to be able to remember the old run length; * reduced the de-/allocation routines (redundant / duplicate tests). Justification for removing Elapsed Time information [can be removed]: --------------------------------------------------------------------- 1. The Elapsed Time information for Ack Vectors was nowhere used in the code. 2. DCCP does not implement rate-based pacing of acknowledgments. The only recommendation for always including Elapsed Time is in section 11.3 of RFC 4340: "Receivers that rate-pace acknowledgements SHOULD [...] include Elapsed Time options". But such is not the case here. 3. It does not really improve estimation accuracy. The Elapsed Time field only records the time between the arrival of the last acknowledgeable packet and the time the Ack Vector is sent out. Since Linux does not (yet) implement delayed Acks, the time difference will typically be small, since often the arrival of a data packet triggers sending feedback at the HC-receiver. Justification for changes in de-/allocation routines [can be removed]: ---------------------------------------------------------------------- * INIT_LIST_HEAD in dccp_ackvec_record_new was redundant, since the list pointers were later overwritten when the node was added via list_add(); * dccp_ackvec_record_new() was called in a single place only; * calls to list_del_init() before calling dccp_ackvec_record_delete() were redundant, since subsequently the entire element was k-freed; * since all calls to dccp_ackvec_record_delete() were preceded to a call to list_del_init(), the WARN_ON test would never evaluate to true; * since all calls to dccp_ackvec_record_delete() were made from within list_for_each_entry_safe(), the test for avr == NULL was redundant; * list_empty() in ackvec_free was redundant, since the same condition is embedded in the loop condition of the subsequent list_for_each_entry_safe(). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Reduce noise in output and convert to ktime_tGerrit Renker
This fixes the problem that dccp_probe output can grow quite large without apparent benefit (many identical data points), creating huge files (up to over one Gigabyte for a few minutes' test run) which are very hard to post-process (in one instance it got so bad that gnuplot ate up all memory plus swap). The cause for the problem is that the kprobe is inserted into dccp_sendmsg(), which can be called in a polling-mode (whenever the TX queue is full due to congestion-control issues, EAGAIN is returned). This creates many very similar data points, i.e. the increase of processing time does not increase the quality/information of the probe output. The fix is to attach the probe to a different function -- write_xmit was chosen since it gets called continually (both via userspace and timer); an input-path function would stop sampling as soon as the other end stops sending feedback. For comparison the output file sizes for the same 20 second test run over a lossy link: * before / without patch: 118 Megabytes * after / with patch: 1.2 Megabytes and there was much less noise in the output. To allow backward compatibility with scripts that people use, the now-unused `size' field in the output has been replaced with the CCID identifier. This also serves for future compatibility - support for CCID2 is work in progress (depends on the still unfinished SRTT/RTTVAR updates). While at it, the update to ktime_t was also performed. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Merge now-reduced connect_init() functionGerrit Renker
After moving the assignment of GAR/ISS from dccp_connect_init() to dccp_transmit_skb(), the former function becomes very small, so that a merger with dccp_connect() suggests itself. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Fix the adjustments to AWL and SWLGerrit Renker
This fixes a problem and a potential loophole with regard to seqno/ackno validity: the problem is that the initial adjustments to AWL/SWL were only performed at the begin of the connection, during the handshake. Since the Sequence Window feature is always greater than Wmin=32 (7.5.2), it is however necessary to perform these adjustments at least for the first W/W' (variables as per 7.5.1) packets in the lifetime of a connection. This requirement is complicated by the fact that W/W' can change at any time during the lifetime of a connection. Therefore the consequence is to perform this safety check each time SWL/AWL are updated. A second problem solved by this patch is that the remote/local Sequence Window feature values (which set the bounds for AWL/SWL/SWH) are undefined until the feature negotiation has completed. During the initial handshake we have more stringent sequence number protection, the changes added by this patch effect that {A,S}W{L,H} are within the correct bounds at the instant that feature negotiation completes (since the SeqWin feature activation handlers call dccp_update_gsr/gss()). A detailed rationale is below -- can be removed from the commit message. 1. Server sequence number checks during initial handshake --------------------------------------------------------- The server can not use the fields of the listening socket for seqno/ackno checks and thus needs to store all relevant information on a per-connection basis on the dccp_request socket. This is a size-constrained structure and has currently only ISS (dreq_iss) and ISR (dreq_isr) defined. Adding further fields (SW{L,H}, AW{L,H}) would increase the size of the struct and it is questionable whether this will have any practical gain. The currently implemented solution is as follows. * receiving first Request: dccp_v{4,6}_conn_request sets ISR := P.seqno, ISS := dccp_v{4,6}_init_sequence() * sending first Response: dccp_v{4,6}_send_response via dccp_make_response() sets P.seqno := ISS, sets P.ackno := ISR * receiving retransmitted Request: dccp_check_req() overrides ISR := P.seqno * answering retransmitted Request: dccp_make_response() sets ISS += 1, otherwise as per first Response * completing the handshake: succeeds in dccp_check_req() for the first Ack where P.ackno == ISS (P.seqno is not tested) * creating child socket: ISS, ISR are copied from the request_sock This solution will succeed whenever the server can receive the Request and the subsequent Ack in succession, without retransmissions. If there is packet loss, the client needs to retransmit until this condition succeeds; it will otherwise eventually give up. Adding further fields to the request_sock could increase the robustness a bit, in that it would make possible to let a reordered Ack (from a retransmitted Response) pass. The argument against such a solution is that if the packet loss is not persistent and an Ack gets through, why not wait for the one answering the original response: if the loss is persistent, it is probably better to not start the connection in the first place. Long story short: the present design (by Arnaldo) is simple and will likely work just as well as a more complicated solution. As a consequence, {A,S}W{L,H} are not needed until the moment the request_sock is cloned into the accept queue. At that stage feature negotiation has completed, so that the values for the local and remote Sequence Window feature (7.5.2) are known, i.e. we are now in a better position to compute {A,S}W{L,H}. 2. Client sequence number checks during initial handshake --------------------------------------------------------- Until entering PARTOPEN the client does not need the adjustments, since it constrains the Ack window to the packet it sent. * sending first Request: dccp_v{4,6}_connect() choose ISS, dccp_connect() then sets GAR := ISS (as per 8.5), dccp_transmit_skb() (with the previous bug fix) sets GSS := ISS, AWL := ISS, AWH := GSS * n-th retransmitted Request (with previous patch): dccp_retransmit_skb() via timer calls dccp_transmit_skb(), which sets GSS := ISS+n and then AWL := ISS, AWH := ISS+n * receiving any Response: dccp_rcv_request_sent_state_process() -- accepts packet if AWL <= P.ackno <= AWH; -- sets GSR = ISR = P.seqno * sending the Ack completing the handshake: dccp_send_ack() calls dccp_transmit_skb(), which sets GSS += 1 and AWL := ISS, AWH := GSS Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Schedule an Ack when receiving timestampsGerrit Renker
This schedules an Ack when receiving a timestamp, exploiting the existing inet_csk_schedule_ack() function, saving one case in the `dccp_ack_pending()' function. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-3: Remove dead statesGerrit Renker
This patch is thanks to an investigation by Leandro Sales de Melo and his colleagues. They worked out two state diagrams which highlight the fact that the xxx_TERM states in CCID-3/4 are in fact not necessary. And this can be confirmed by in turn looking at the code: the xxx_TERM states are only ever set in ccid3_hc_{rx,tx}_exit(). These two functions are part of the following call chain: * ccid_hc_{tx,rx}_exit() are called from ccid_delete() only; * ccid_delete() invokes ccid_hc_{tx,rx}_exit() in the way of a destructor: after calling ccid_hc_{tx,rx}_exit(), the CCID is released from memory; * ccid_delete() is in turn called only by ccid_hc_{tx,rx}_delete(); * ccid_hc_{tx,rx}_delete() is called only if - feature negotiation failed (dccp_feat_activate_values()), - when changing the RX/TX CCID (to eject the current CCID), - when destroying the socket (in dccp_destroy_sock()). In other words, when CCID-3 sets the state to xxx_TERM, it is at a time where no more processing should be going on, hence it is not necessary to introduce a dedicated exit state - this is implicit when unloading the CCID. The patch removes this state, one switch-statement collapses as a result. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-3: Remove duplicate documentationGerrit Renker
This removes RX-socket documentation which is either duplicate or non-existent. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Unused argument in CCID tx functionGerrit Renker
This removes the argument `more' from ccid_hc_tx_packet_sent, since it was nowhere used in the entire code. (Anecdotally, this argument was not even used in the original KAME code where the function originally came from; compare the variable moreToSend in the freebsd61-dccp-kame-28.08.2006.patch now maintained by Emmanuel Lochin.) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Replace magic CCID-specific numbers by symbolic constantsGerrit Renker
The constants DCCPO_{MIN,MAX}_CCID_SPECIFIC are nowhere used in the code, but instead for the CCID-specific options numbers are used. This patch unifies the use of CCID-specific option numbers, by adding symbolic names reflecting the definitions in RFC 4340, 10.3. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-3: Remove redundant 'options_received' structGerrit Renker
The `options_received' struct is redundant, since it re-duplicates the existing `p' and `x_recv' fields. This patch removes the sub-struct and migrates the format conversion operations (cf. below) to ccid3_hc_tx_parse_options(). Why the fields are redundant ---------------------------- The Loss Event Rate p and the Receive Rate x_recv are initially 0 when first loading CCID-3, as ccid_new() zeroes out the entire ccid3_hc_tx_sock. When Loss Event Rate or Receive Rate options are received, they are stored by ccid3_hc_tx_parse_options() into the fields `ccid3or_loss_event_rate' and `ccid3or_receive_rate' of the sub-struct `options_received' in ccid3_hc_tx_sock. After parsing (considering only the established state - dccp_rcv_established()), the packet is passed on to ccid_hc_tx_packet_recv(). This calls the CCID-3 specific routine ccid3_hc_tx_packet_recv(), which performs the following copy operations between fields of ccid3_hc_tx_sock: * hctx->options_received.ccid3or_receive_rate is copied into hctx->x_recv, after scaling it for fixpoint arithmetic, by 2^64; * hctx->options_received.ccid3or_loss_event_rate is copied into hctx->p, considering the above special cases; in addition, a value of 0 here needs to be mapped into p=0 (when no Loss Event Rate option has been received yet). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp tfrc/ccid-3: Computing Loss Rate from Loss Event RateGerrit Renker
This adds a function to take care of the following cases occurring in the computation of the Loss Rate p: * 1/(2^32-1) is mapped into 0% as per RFC 4342, 8.5; * 1/0 is mapped into the maximum of 100%; * we want to avoid that p = 1/x is rounded down to 0 when x is very large, since this means accidentally re-entering slow-start (indicated by p==0). In the last case, the minimum-resolution value of p is returned. Furthermore, a bug in ccid3_hc_rx_getsockopt is fixed (1/0 was mapped into ~0U), which now allows to consistently print the scaled p-values as printf("Loss Event Rate = %u.%04u %%\n", rx_info.tfrcrx_p / 10000, rx_info.tfrcrx_p % 10000); Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Add packet type information to CCID-specific option parsingGerrit Renker
This patch ... 1. adds packet type information to ccid_hc_{rx,tx}_parse_options(). This is necessary, since table 3 in RFC 4340, 5.8 leaves it to the CCIDs to state which options may (not) appear on what packet type. 2. adds such a check for CCID-3's {Loss Event, Receive} Rate as specified in RFC 4340 8.3 ("Receive Rate options MUST NOT be sent on DCCP-Data packets") and 8.5 ("Loss Event Rate options MUST NOT be sent on DCCP-Data packets"). 3. removes an unused argument `idx' from ccid_hc_{rx,tx}_parse_options(). This is also no longer necessary, since the CCID-specific option-parsing routines are passed every single parameter of the type-length-value option encoding. Also added documentation and made argument naming scheme consistent. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-3: Simplify and consolidate tx_parse_optionsGerrit Renker
This simplifies and consolidates the TX option-parsing code: 1. The Loss Intervals option is not currently used, so dead code related to this option is removed. I am aware of no plans to support the option, but if someone wants to implement it (e.g. for inter-op tests), it is better to start afresh than having to also update currently unused code. 2. The Loss Event and Receive Rate options have a lot of code in common (both are 32 bit, both have same length etc.), so this is consolidated. 3. The test against GSR is not necessary, because - on first loading CCID3, ccid_new() zeroes out all fields in the socket; - ccid3_hc_tx_packet_recv() treats 0 and ~0U equivalently, due to pinv = opt_recv->ccid3or_loss_event_rate; if (pinv == ~0U || pinv == 0) hctx->p = 0; - as a result, the sequence number field is removed from opt_recv. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-3: Remove ugly RTT-sampling history lookupGerrit Renker
This removes the RTT-sampling function tfrc_tx_hist_rtt(), since 1. it suffered from complex passing of return values (the return value both indicated successful lookup while the value doubled as RTT sample); 2. when for some odd reason the sample value equalled 0, this triggered a bug warning about "bogus Ack", due to the ambiguity of the return value; 3. on a passive host which has not sent anything the TX history is empty and thus will lead to unwanted "bogus Ack" warnings such as ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-28197148 ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-26641606. The fix is to replace the implicit encoding by performing the steps manually. Furthermore, the "bogus Ack" warning has been removed, since it can actually be triggered due to several reasons (network reordering, old packet, (3) above), hence it is not very useful. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-3: Bug fix for the inter-packet scheduling algorithmGerrit Renker
This fixes a subtle bug in the calculation of the inter-packet gap and shows that t_delta, as it is currently used, is not needed. And hence replaced. The algorithm from RFC 3448, 4.6 below continually computes a send time t_nom, which is initialised with the current time t_now; t_gran = 1E6 / HZ specifies the scheduling granularity, s the packet size, and X the sending rate: t_distance = t_nom - t_now; // in microseconds t_delta = min(t_ipi, t_gran) / 2; // `delta' parameter in microseconds if (t_distance >= t_delta) { reschedule after (t_distance / 1000) milliseconds; } else { t_ipi = s / X; // inter-packet interval in usec t_nom += t_ipi; // compute the next send time send packet now; } 1) Description of the bug ------------------------- Rescheduling requires a conversion into milliseconds, due to this call chain: * ccid3_hc_tx_send_packet() returns a timeout in milliseconds, * this value is converted by msecs_to_jiffies() in dccp_write_xmit(), * and finally used as jiffy-expires-value for sk_reset_timer(). The highest jiffy resolution with HZ=1000 is 1 millisecond, so using a higher granularity does not make much sense here. As a consequence, values of t_distance < 1000 are truncated to 0. This issue has so far been resolved by using instead if (t_distance >= t_delta + 1000) reschedule after (t_distance / 1000) milliseconds; The bug is in artificially inflating t_delta to t_delta' = t_delta + 1000. This is unnecessarily large, a more adequate value is t_delta' = max(t_delta, 1000). 2) Consequences of using the corrected t_delta' ----------------------------------------------- Since t_delta <= t_gran/2 = 10^6/(2*HZ), we have t_delta <= 1000 as long as HZ >= 500. This means that t_delta' = max(1000, t_delta) is constant at 1000. On the other hand, when using a coarse HZ value of HZ < 500, we have three sub-cases that can all be reduced to using another constant of t_gran/2. (a) The first case arises when t_ipi > t_gran. Here t_delta' is the constant t_delta' = max(1000, t_gran/2) = t_gran/2. (b) If t_ipi <= 2000 < t_gran = 10^6/HZ usec, then t_delta = t_ipi/2 <= 1000, so that t_delta' = max(1000, t_delta) = 1000 < t_gran/2. (c) If 2000 < t_ipi <= t_gran, we have t_delta' = max(t_delta, 1000) = t_ipi/2. In the second and third cases we have delay values less than t_gran/2, which is in the order of less than or equal to half a jiffy. How these are treated depends on how fractions of a jiffy are handled: they are either always rounded down to 0, or always rounded up to 1 jiffy (assuming non-zero values). In both cases the error is on average in the order of 50%. Thus we are not increasing the error when in the second/third case we replace a value less than t_gran/2 with 0, by setting t_delta' to the constant t_gran/2. 3) Summary ---------- Fixing (1) and considering (2), the patch replaces t_delta with a constant, whose value depends on CONFIG_HZ, changing the above algorithm to: if (t_distance >= t_delta') reschedule after (t_distance / 1000) milliseconds; where t_delta' = 10^6/(2*HZ) if HZ < 500, and t_delta' = 1000 otherwise. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-3: No more CCID control blocks in LISTEN stateGerrit Renker
The CCIDs are activated as last of the features, at the end of the handshake, were the LISTEN state of the master socket is inherited into the server state of the child socket. Thus, the only states visible to CCIDs now are OPEN/PARTOPEN, and the closing states. This allows to remove tests which were previously necessary to protect against referencing a socket in the listening state (in CCID3), but which now have become redundant. As a further byproduct of enabling the CCIDs only after the connection has been fully established, several typecast-initialisations of ccid3_hc_{rx,tx}_sock can now be eliminated: * the CCID is loaded, so it is not necessary to test if it is NULL, * if it is possible to load a CCID and leave the private area NULL, then this is a bug, which should crash loudly - and earlier, * the test for state==OPEN || state==PARTOPEN now reduces only to the closing phase (e.g. when the node has received an unexpected Reset). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp ccid-3: Remove ccid3hc{tx,rx}_ prefixesGerrit Renker
This patch does the same for CCID-3 as the previous patch for CCID-2: s#ccid3hctx_##g; s#ccid3hcrx_##g; plus manual editing to retain consistency. Please note: expanded the fields of the `struct tfrc_tx_info' in the hc_tx_sock, since using short #define identifiers is not a good idea. The only place where this embedded struct was used is ccid3_hc_tx_getsockopt(). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp ccid-2: Remove ccid2hc{tx,rx}_ prefixesGerrit Renker
This patch fixes two problems caused by the ubiquitous long "hctx->ccid2htx_" and "hcrx->ccid2hcrx_" prefixes: * code becomes hard to read; * multiple-line statements are almost inevitable even for simple expressions; The prefixes are not really necessary (compare with "struct tcp_sock"). There had been previous discussion of this on dccp@vger, but so far this was not followed up (most people agreed that the prefixes are too long). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Leandro Melo de Sales <leandroal@gmail.com>
2008-09-04dccp: Special case of the MPS for client-PARTOPEN with DataAcksGerrit Renker
To increase robustness, it is necessary to resend Confirm feature-negotiation options, even though the RFC does not mandate it. But feature negotiation options can take (much) more room than the options on common DataAck packets. Instead of reducing the MPS always for a case which only applies to the three messages send during initial handshake, this patch devises a special case: if the payload length of the DataAck in PARTOPEN is too large, an Ack is sent to carry the options, and the feature-negotiation list is then flushed. This means that the server gets two Acks for one Response. If both Acks get lost, it is probably better to restart the connection anyway and devising yet another special-case does not seem worth the extra complexity. The patch (over-)estimates the expected overhead to be 32*4 bytes -- commonly seen values were 20-90 bytes for initial feature-negotiation options. It uses sizeof(u32) to mean "aligned units of 4 bytes". For consistency, another use of sizeof is modified. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-09-04dccp: Leave headroom for options when calculating the MPSGerrit Renker
The Maximum Packet Size (MPS) is of interest for applications which want to transfer data, so it is only relevant to the data transfer phase of a connection (unless one wants to send data on the DCCP-Request, but that is not considered here). The strategy chosen to deal with this requirement is to leave room for only such options that may appear on data packets. A special consideration applies to Ack Vectors: this is purely guesswork, since these can have any length between 3 and 1020 bytes. The strategy chosen here is to subtract a configurable minimum, the value of 16 bytes (2 bytes for type/length plus 14 Ack Vector cells) has been found by experimentatation. If people experience this as too much or too little, this could later be turned into a Kconfig option. There are currently no CCID-specific header options which may appear on data packets, hence it is not necessary to define a corresponding CCID field. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp ccid-2: Use feature-negotiation to report Ack Ratio changesGerrit Renker
This uses the new feature-negotiation framework to signal Ack Ratio changes, as required by RFC 4341, sec. 6.1.2. This raises some problems for CCID-2 since it can at the moment not cope gracefully with Ack Ratio of e.g. 2. A FIXME has thus been added which reverts to the existing policy of bypassing the Ack Ratio sysctl. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Support for exchanging of NN options in established stateGerrit Renker
This patch provides support for the reception of NN options in (PART)OPEN state. It is a combination of change_recv() and confirm_recv(), specifically geared towards receiving the `fast-path' NN options. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Support for the exchange of NN options in established stateGerrit Renker
In contrast to static feature negotiation at the begin of a connection, which establishes the capabilities of both endpoints, this patch introduces support for dynamic exchange of feature negotiation options. Such a dynamic exchange is necessary in at least two cases: * CCID-2's Ack Ratio (RFC 4341, 6.1.2) which changes during the connection; * Sequence Window values that, as per RFC 4340, 7.5.2, should be sent "as as the connection progresses". Both are NN (non-negotiable) features. Hence dynamic feature "negotiation" is distinguished from static/pre-connection negotiation by the following: * no new capabilities are negotiated (those that matter for the connection are negotiated prior to setting up the connection, comparable to SIP); * features must be understood by each endpoint: as per RFC 4340, 6.4, Sequence Window is "Req'd" and Ack Ratio must be understood when CCID-2 is used as per the note underneath Table 4. These characteristics are reflected in the implementation: * only NN options can be exchanged after connection setup; * NN options are activated directly after validating them. The rationale is that a peer must accept every valid NN value (RFC 4340, 6.3.2), hence it will either accept the value and send a "Confirm R", or it will send an empty Confirm (which will reset the connection according to FN rules). * An Ack is scheduled directly after activation to accelerate communicating the update to the peer. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Debugging functions for feature negotiationGerrit Renker
Since all feature-negotiation processing now takes place in feat.c, functions for producing verbose debugging output are concentrated there. New functions to print out values, entry records, and options are provided, and also a macro is defined to not always have the function name in the output line. Thanks a lot to Wei Yongjun and Giuseppe Galeota for help with errors in an earlier revision of this patch. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Initialisation and type-checking of feature sysctlsGerrit Renker
This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly act on the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Further changes: ---------------- Performed s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Implement both feature-local and feature-remote Sequence Window featureGerrit Renker
This adds full support for local/remote Sequence Window feature, from which the * sequence-number-validity (W) and * acknowledgment-number-validity (W') windows derive as specified in RFC 4340, 7.5.3. Specifically, the following changes are introduced: * integrated new socket fields into dccp_sk; * updated the update_gsr/gss routines with regard to these fields; * updated handler code: the Sequence Window feature is located at the TX side, so the local feature is meant if the handler-rx flag is false; * the initialisation of `rcv_wnd' in reqsk is removed, since - rcv_wnd is not used by the code anywhere; - sequence number checks are not done in the LISTEN state (cf. 7.5.3); - dccp_check_req checks the Ack number validity more rigorously; * the `struct dccp_minisock' became empty and is now removed. Until the handshake completes with activating negotiated values, the local/remote Sequence-Window values are undefined and thus can not reliably be estimated. This issue is addressed in a separate patch. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Auto-load (when supported) CCID plugins for negotiationGerrit Renker
This adds auto-loading of CCIDs (when module loading is enabled) for the purpose of feature negotiation. The problem with loading the CCIDs at the end of feature negotiation is that this would happen in software interrupt context. Besides, if the host advertises CCIDs during negotiation, it should have them ready to use, in case an agreeing peer wants to use it for the connection. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Initialisation framework for feature negotiationGerrit Renker
This initialises feature negotiation from two tables, which are initialised from sysctls. As a novel feature, specifics of the implementation (e.g. currently short seqnos and ECN are not supported) are advertised for robustness. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp ccid-2: Phase out the use of boolean Ack Vector sysctlGerrit Renker
This removes the use of the sysctl and the minisock variable for the Send Ack Vector feature, which is now handled fully dynamically via feature negotiation; i.e. when CCID2 is enabled, Ack Vectors are automatically enabled (as per RFC 4341, 4.). Using a sysctl in parallel to this implementation would open the door to crashes, since much of the code relies on tests of the boolean minisock / sysctl variable. Thus, this patch replaces all tests of type if (dccp_msk(sk)->dccpms_send_ack_vector) /* ... */ with if (dp->dccps_hc_rx_ackvec != NULL) /* ... */ The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature negotiation concluded that Ack Vectors are to be used on the half-connection. Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child), so that the test is a valid one. The activation handler for Ack Vectors is called as soon as the feature negotiation has concluded at the * server when the Ack marking the transition RESPOND => OPEN arrives; * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN. Adding the sequence number of the Response packet to the Ack Vector has been removed, since (a) connection establishment implies that the Response has been received; (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e. this entry will always be ignored; (c) it can not be used for anything useful - to detect loss for instance, only packets received after the loss can serve as pseudo-dupacks. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Remove manual influence on NDP Count featureGerrit Renker
Updating the NDP count feature is handled automatically now: * for CCID-2 it is disabled, since the code does not use NDP counts; * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths. Allowing the user to change NDP values leads to unpredictable and failing behaviour, since it is then possible to disable NDP counts even when they are needed (e.g. in CCID-3). This means that only those user settings are sensible that agree with the values for Send NDP Count implied by the choice of CCID. But those settings are already activated by the feature negotiation (CCID dependency tracking), hence this form of support is redundant. At startup the initialisation of the NDP count feature is with the default value of 0, which is done implicitly by the zeroing-out of the socket when it is allocated. If the choice of CCID or feature negotiation enables NDP count, this will then be updated via the NDP activation handler. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
2008-09-04dccp: Remove obsolete parts of the old CCID interfaceGerrit Renker
The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector case, their value equals initially that of the sysctl, but at the end of feature negotiation may be something different. The old interface removed by this patch thus has been replaced by the newer interface to dynamically query the currently loaded CCIDs earlier in this patch set. Also removed the constructors for the TX CCID and the RX CCID, since the switch rx/non-rx is done by the handler in minisocks.c (and the handler is the only place in the code where CCIDs are loaded). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>