aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-17[ARM] 4883/1: Adds some missing gpio defines for S3C2410Davide Rizzo
This is a small addition of forgotten defines to regs-gpio.h include file for the Samsung S3C2410 ARM9 SoC Signed-off-by: Davide Rizzo <davide@elpa.it> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4987/1: S3C24XX: Ensure watchdog reset initiated from cached code.Ben Dooks
There seems to be some problem with at-least the S3C2440 and bus traffic during an reset. It is unlikely, but still possible that the system will hang in such a way that the watchdog cannot get the system out of the state it is in. Change to making the code that calls the watchdog reset run from cached memory so that instruction fetches have quiesced before the watchdog fires. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4986/1: S3C24XX: Simtec machines need UCLK as parent to DCLKBen Dooks
All current Simtec designs source the DCLK outputs from the UPLL. This means the DCLK's parent must be set to UPLL so that anything enabling and disabling an UPLL sourced clock does not shutdown the DCLK due to missing open counts. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4985/1: S3C2412: Fix ARMDIVN name in CLKDIVN definition.Ben Dooks
Fix the name of the S3C2412_CLKDIVN_ARMDIVN define. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4984/1: S3C24XX: Do not assert nRSTOUT on BAST over suspend.Ben Dooks
Change GPA21 to output over reset so that nRSTOUT is not asserted whilst suspended. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4983/1: S3C2412: Add initial memory controller registersBen Dooks
Add initial defines for the S3C2412's memory controller registers. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-25Linux 2.6.25-rc7Linus Torvalds
2008-03-25ACPI: fix Medion _PRT quirk (use "ISA_", not "ISA")Bjorn Helgaas
This fixes the builtin RTL8139 NIC on the Medion MD9580-F laptop. The BIOS reports the interrupt routing incorrectly. I recently added a quirk to work around this, and this patch fixes a typo in the quirk. We pad every ACPI pathname component to four characters, so ".ISA." will never match anything. We need ".ISA_." instead. Thank you Johann-Nikolaus Andreae <johann-nikolaus.andreae@nacs.de> for patiently testing this patch. See http://bugzilla.kernel.org/show_bug.cgi?id=4773 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-25Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Fix docbook problem ASoC/TLV320AIC3X: Stop I2C driver ID abuse i2c-omap: Fix unhandled fault i2c-bfin-twi: Disable BF54x support for now
2008-03-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: MMU: Fix memory leak on guest demand faults KVM: VMX: convert init_rmode_tss() to slots_lock KVM: MMU: handle page removal with shadow mapping KVM: MMU: Fix is_rmap_pte() with io ptes KVM: VMX: Restore tss even on x86_64
2008-03-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] get stack footprint of pathname resolution back to relative sanity [PATCH] double iput() on failure exit in hugetlb [PATCH] double dput() on failure exit in tiny-shmem [PATCH] fix up new filp allocators [PATCH] check for null vfsmount in dentry_open() [PATCH] reiserfs: eliminate private use of struct file in xattr [PATCH] sanitize hppfs hppfs pass vfsmount to dentry_open() [PATCH] restore export of do_kern_mount()
2008-03-25KVM: MMU: Fix memory leak on guest demand faultsAvi Kivity
While backporting 72dc67a69690288538142df73a7e3ac66fea68dc, a gfn_to_page() call was duplicated instead of moved (due to an unrelated patch not being present in mainline). This caused a page reference leak, resulting in a fairly massive memory leak. Fix by removing the extraneous gfn_to_page() call. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: VMX: convert init_rmode_tss() to slots_lockMarcelo Tosatti
init_rmode_tss was forgotten during the conversion from mmap_sem to slots_lock. INFO: task qemu-system-x86:3748 blocked for more than 120 seconds. Call Trace: [<ffffffff8053d100>] __down_read+0x86/0x9e [<ffffffff8053fb43>] do_page_fault+0x346/0x78e [<ffffffff8053d235>] trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff8053dcad>] error_exit+0x0/0xa9 [<ffffffff8035a7a7>] copy_user_generic_string+0x17/0x40 [<ffffffff88099a8a>] :kvm:kvm_write_guest_page+0x3e/0x5f [<ffffffff880b661a>] :kvm_intel:init_rmode_tss+0xa7/0xf9 [<ffffffff880b7d7e>] :kvm_intel:vmx_vcpu_reset+0x10/0x38a [<ffffffff8809b9a5>] :kvm:kvm_arch_vcpu_setup+0x20/0x53 [<ffffffff8809a1e4>] :kvm:kvm_vm_ioctl+0xad/0x1cf [<ffffffff80249dea>] __lock_acquire+0x4f7/0xc28 [<ffffffff8028fad9>] vfs_ioctl+0x21/0x6b [<ffffffff8028fd75>] do_vfs_ioctl+0x252/0x26b [<ffffffff8028fdca>] sys_ioctl+0x3c/0x5e [<ffffffff8020b01b>] system_call_after_swapgs+0x7b/0x80 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: MMU: handle page removal with shadow mappingMarcelo Tosatti
Do not assume that a shadow mapping will always point to the same host frame number. Fixes crash with madvise(MADV_DONTNEED). [avi: move after first printk(), add another printk()] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: MMU: Fix is_rmap_pte() with io ptesAvi Kivity
is_rmap_pte() doesn't take into account io ptes, which have the avail bit set. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25KVM: VMX: Restore tss even on x86_64Avi Kivity
The vmx hardware state restore restores the tss selector and base address, but not its length. Usually, this does not matter since most of the tss contents is within the default length of 0x67. However, if a process is using ioperm() to grant itself I/O port permissions, an additional bitmap within the tss, but outside the default length is consulted. The effect is that the process will receive a SIGSEGV instead of transparently accessing the port. Fix by restoring the tss length. Note that i386 had this working already. Closes bugzilla 10246. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Fix cut-and-paste error in rtl8150.c USB: ehci: stop vt6212 bus hogging USB: sierra: add another device id USB: sierra: dma fixes USB: add support for Motorola ROKR Z6 cellphone in mass storage mode USB: isd200: fix memory leak in isd200_get_inquiry_data USB: pl2303: another product ID USB: new quirk flag to avoid Set-Interface USB: fix gadgetfs class request delegation
2008-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: driver core: debug for bad dev_attr_show() return value. UIO: add pgprot_noncached() to UIO mmap code
2008-03-24PCI: revert "pcie: utilize pcie transaction pending bit"Andrew Morton
Revert as it is reported to cause problems for people. commit 4348a2dc49f9baecd34a9b0904245488c6189398 Author: Shaohua Li <shaohua.li@intel.com> Date: Wed Oct 24 10:45:08 2007 +0800 pcie: utilize pcie transaction pending bit PCIE has a mechanism to wait for Non-Posted request to complete. I think pci_disable_device is a good place to do this. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Due to the regression reported at http://bugzilla.kernel.org/show_bug.cgi?id=10065 Cc: Shaohua Li <shaohua.li@intel.com> Cc: Soeren Sonnenburg <kernel@nn7.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24PCI: iova: lockdep false alarm fixMark Gross
lockdep goes off on the iova copy_reserved_iova() because it and a function it calls grabs locks in the from, and the to of the copy operation. The function grab locks of the same lock classes triggering the warning. The first lock grabbed is for the constant reserved areas that is never accessed after early boot. Technically you could do without grabbing the locks for the "from" structure its copying reserved areas from. But dropping the from locks to me looks wrong, even though it would be ok. The affected code only runs in early boot as its setting up the DMAR engines. This patch gives the reserved_ioval_list locks special lockdep classes. Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24driver core: debug for bad dev_attr_show() return value.Andrew Morton
Try to find the culprit who caused http://bugzilla.kernel.org/show_bug.cgi?id=10150 Cc: <balajirrao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24UIO: add pgprot_noncached() to UIO mmap codeJean-Samuel Chenard
Mapping of physical memory in UIO needs pgprot_noncached() to ensure that IO memory is not cached. Without pgprot_noncached(), it (accidentally) works on x86 and arm, but fails on PPC. Signed-off-by: Jean-Samuel Chenard <jsamch@gmail.com> Signed-off-by: Hans J Koch <hjk@linutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: Fix cut-and-paste error in rtl8150.cRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: ehci: stop vt6212 bus hoggingRene Herman
The VIA VT6212 defaults to only waiting 1us between passes over EHCI's async ring, which hammers PCI badly ... and by preventing other devices from accessing the bus, causes problems like drops in IDE throughput, a problem that's been bugging users of those chips for several years. A (partial) datasheet for this chip eventually turned up, letting us see how to make it use a VIA-specific register to switch over to the the normal 10us value instead, as suggested by the EHCI specification Solution noted by Lev A. Melnikovsky. It's not clear whether this register exists on other VIA chips; we know that it's ineffective on the vt8235. So this patch only applies to chips that seem to be incarnations of the (discrete) vt6212. Signed-off-by: Rene Herman <rene.herman@gmail.com> Tested-by: Lev A. Melnikovsky <melnikovsky@mail.ru> Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: sierra: add another device idKevin Lloyd
Add support for the MC8775 device to the sierra driver. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: sierra: dma fixesOliver Neukum
while I was adding autosuspend to that driver I noticed a few issues. You were having DMAed buffers as a part of a structure. This will fail on platforms that are not DMA-coherent (arm, sparc, ppc, ...) Please test this patch to fix it. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: add support for Motorola ROKR Z6 cellphone in mass storage modeConstantin Baranov
Motorola ROKR Z6 cellphone has bugs in its USB, so it is impossible to use it as mass storage. Patch describes new "unusual" USB device for it with FIX_INQUIRY and FIX_CAPACITY flags and new BULK_IGNORE_TAG flag. Last flag relaxes check for equality of bcs->Tag and us->tag in usb_stor_Bulk_transport routine. Signed-off-by: Constantin Baranov <const@tltsu.ru> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: isd200: fix memory leak in isd200_get_inquiry_dataBoaz Harrosh
If the inquiry fails then the info structure on us->extra was not freed. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: pl2303: another product IDMax Arnold
Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm contains Prolific 2303 chip. Actually their site a bit outdated - I have AlDiga AL-11U GSM/GPRS/EDGE modem and it works with pl2303 module after adding corresponding product ID. By default modem uses baud rate 460800. GSM chipset - SIMCom SIM600, quad band 850/900/1800/1900 MHz Device info: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=067b ProdID=0611 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303 E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Max Arnold <lwarxx@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: new quirk flag to avoid Set-InterfaceAlan Stern
This patch (as1057) fixes a problem with the X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter; the device crashes when it receives a Set-Interface request. A new quirk (USB_QUIRK_NO_SET_INTF) is introduced and a quirks entry is created for this device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24USB: fix gadgetfs class request delegationRoy Hashimoto
gadgetfs (drivers/usb/gadget/inode.c) was not delegating all non-device requests to userspace. This patch makes the handling of all request cases consistent. Signed-off-by: Roy Hashimoto <hashimot@alumni.caltech.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] mpc5200: Fix incorrect compatible string for the mdio node [POWERPC] Update some defconfigs
2008-03-24Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] ahci: SB600 workaround is suspect... play it safe for now sata_promise: fix hardreset hotplug events, take 2 libata: improve HPA error handling libata: assume no device is attached if both IDENTIFYs are aborted pata_it821x: use raw nbytes in check_atapi_dma libata: implement ata_qc_raw_nbytes()
2008-03-24[libata] ahci: SB600 workaround is suspect... play it safe for nowJeff Garzik
At least one report claims that a878539ef994787c447a98c2e3ba0fe3dad984ec failed to solve lockups, whereas the old limit-to-32-bit trick worked. Restore the 32-bit limit, but also leave the 255-sector limit in place, because we know that's needed as well. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-linus: kbuild: soften modpost checks when doing cross builds
2008-03-25Merge branch 'linux-2.6' into mergePaul Mackerras
2008-03-24sata_promise: fix hardreset hotplug events, take 2Mikael Pettersson
A Promise SATA controller will signal hotplug events when a hard reset (COMRESET) is done on a port. These events aren't masked by the driver, and the unexpected interrupts will cause a sequence of failed reset attempts util libata's EH finally gives up. This has not been a common problem so far, but the pending libata hardreset-by-default changes makes it a critical issue. The solution is to disable hotplug events before a reset, and to reenable them afterwards. (Promise's driver does this too.) This patch adds SATA-specific versions of ->freeze() and ->thaw() that also disable and enable hotplug events. PATA ports continue to use the old versions of ->freeze() and ->thaw(). Accesses to the hotplug register must be serialised via host->lock. We rely on ap->lock == &ap->host->lock and that libata takes this lock before ->freeze() and ->thaw(). Document this requirement. The interrupt handler is adjusted so its hotplug register accesses are inside the region protected by host->lock. Tested on various chips (SATA300TX4, SATA300TX2plus, SATAII150TX4, FastTrack TX4000) with various combinations of SATA and PATA disks, with and without the pending hardreset-by-default changes. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-24Make printk() console semaphore accesses sensibleLinus Torvalds
The printk() logic on when/how to get the console semaphore was unreadable, this splits the code up into a few helper functions and makes it easier to follow what is going on. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24bsd_acct: using task_struct->tgid is not right in pid-namespacesPavel Emelyanov
In case we're accounting from a sub-namespace, the tgids reported will not refer to the right namespace. Save the pid_namespace we're accounting in on the acct_glbs and use it in do_acct_process. Two less :) places using the task_struct.tgid member. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24bsd_acct: plain current->real_parent access is not always safePavel Emelyanov
This is minor, but dereferencing even current real_parent is not safe on debug kernels, since the memory, this points to, can be unmapped - RCU protection is required. Besides, the tgid field is deprecated and is to be replaced with task_tgid_xxx call (the 2nd patch), so RCU will be required anyway. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24revert "kswapd should only wait on IO if there is IO"Andrew Morton
Revert commit f1a9ee758de7de1e040de849fdef46e6802ea117: Author: Rik van Riel <riel@redhat.com> Date: Thu Feb 7 00:14:08 2008 -0800 kswapd should only wait on IO if there is IO The current kswapd (and try_to_free_pages) code has an oddity where the code will wait on IO, even if there is no IO in flight. This problem is notable especially when the system scans through many unfreeable pages, causing unnecessary stalls in the VM. Additionally, tasks without __GFP_FS or __GFP_IO in the direct reclaim path will sleep if a significant number of pages are encountered that should be written out. This gives kswapd a chance to write out those pages, while the direct reclaim task sleeps. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Because of large latencies and interactivity problems reported by Carlos, here: http://lkml.org/lkml/2008/3/22/211 Cc: Rik van Riel <riel@redhat.com> Cc: "Carlos R. Mafra" <crmafra2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24hw_random doc updatesDavid Brownell
Update documentation for the hw_random support to be current: - Documentation/hw_random.txt has been updated to reflect the current code: it's a framework now, a "core" with a small sysfs interface, that hardware-specific drivers plug in to. Text specific to Intel hardware is now at the end. - Kconfig now references the Documentation/hw_random.txt file and better explains what this really does. Both chunks of documentation now higlight the fact that the kernel entropy pool is maintained by "rngd", and this driver has nothing directly to do with that important task. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24smackfs: remove redundant lock, fix open(,O_RDWR)Ahmed S. Darwish
Older smackfs was parsing MAC rules by characters, thus a need of locking write sessions on open() was needed. This lock is no longer useful now since each rule is handled by a single write() call. This is also a bugfix since seq_open() was not called if an open() O_RDWR flag was given, leading to a seq_read() without an initialized seq_file, thus an Oops. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Reported-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24markers: remove ACCESS_ONCEMathieu Desnoyers
As Paul pointed out, the ACCESS_ONCE are not needed because we already have the explicit surrounding memory barriers. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Mason <mmlnx@us.ibm.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: David Smith <dsmith@redhat.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24markers: update preempt_disable. call_rcu, rcu_barrier commentsMathieu Desnoyers
Add comments requested by Andrew. Updated comments about synchronize_sched(). Since we use call_rcu and rcu_barrier now, these comments were out of sync with the code. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Mason <mmlnx@us.ibm.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: David Smith <dsmith@redhat.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24mm: fix boundary checking in free_bootmem_coreYinghai Lu
With numa enabled, some callers could have a range of memory on one node but try to free that on other node. This can cause some pages to be freed wrongly. For example: when we try to allocate 128g boot ram early for gart/swiotlb, and free that range later so gart/swiotlb can get some range afterwards. With this patch, we don't need to care which node holds the range, just loop to call free_bootmem_node for all online nodes. This patch makes free_bootmem_core() more robust by trimming the sidx and eidx according the ram range that the node has. And make the free_bootmem_core handle this out of range case. We could use bdata_list to make sure the range can be freed for sure. So next time, we don't need to loop online nodes and could use free_bootmem directly. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24mtd: memory corruption in block2mtd.cIngo van Lil
The block2mtd driver (drivers/mtd/devices/block2mtd.c) will kfree an on-stack pointer when handling an invalid argument line (e.g. block2mtd=/dev/loop0,xxx). The kfree was added some time ago when "name" was dynamically allocated. Signed-off-by: Ingo van Lil <inguin@gmx.de> Acked-by: Joern Engel <joern@lazybastard.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: <stable@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24kernel-parameters.txt: document memmap option betterPavel Machek
Provide example for memmap exclude option (it is slightly strange and non-trivial) and provide nice small HOWTO for people with bad memory. Signed-off-by: Jan-Simon Moeller <dl9pf@gmx.de> Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-25[POWERPC] mpc5200: Fix incorrect compatible string for the mdio nodeGrant Likely
The MDIO node in the lite5200b.dts file needs to also claim compatibility with the older mpc5200 chip. Otherwise the driver won't find the device. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-24libata: improve HPA error handlingTejun Heo
There's no point in retrying and eventually failing device detection when the device rejects READ_NATIVE_MAX[_EXT]. Disable HPA unlocking if READ_NATIVE_MAX[_EXT] is rejected as done when SET_MAX[_EXT] is rejected. This allows some old drives to work even if they aren't blacklisted. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>