aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-07-14[SCSI] fix function prototype warningJames Bottomley
int_to_scsilun() takes a pointer to a struct scsi_lun in it's prototype, so add this structure to scsi_device.h to avoid declaration inside function prototype warnings. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] Redundant this_count check in sd_init_command()Chen, Kenneth W
I was going over the scsi I/O submit path, when sd_init_command construct the scsi command, this_count is already checked in the previous else if clause. Why does it need to check it again in the last else block? Patch to delete the spurious check. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] Redundant memset in scsi_alloc_sgtableChen, Kenneth W
scsi_init_io calls scsi_alloc_sgtable and then calls blk_rq_map_sg to initialize the scatterlist structure. blk_rq_map_sg() already memset the structure for every new segment. That makes the memset in scsi_alloc_sgtable unnecessary. Patch to delete the extra memset in scsi_alloc_sgtable. Tested on a x86_64 machine. Looks stable to me. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] add int_to_scsilun() functionJames.Smart@Emulex.Com
One of the issues we had was reverting the midlayers lun value into the 8byte lun value that we wanted to send to the device. Historically, there's been some combination of byte swapping, setting high/low, etc. There's also been no common thread between how our driver did it and others. I also got very confused as to why byteswap routines were being used. Anyway, this patch is a LLDD-callable function that reverts the midlayer's lun value, stored in an int, to the 8-byte quantity (note: this is not the real 8byte quantity, just the same amount that scsilun_to_int() was able to convert and store originally). This also solves the dilemma of the thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=112116767118981&w=2 A patch for the lpfc driver to use this function will be along in a few days (batched with other patches). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Cleanup FC remote port registration.Andrew Vasquez
Cleanup FC remote port registration. Due to the inherent behaviour (an immediate scan) of adding a 'target'-role-capable rport via fc_remote_port_add(), split the registration into two steps -- addition as unknown-type role, then use fc_remote_port_rolchg() with appropriate role (based on PLOGI/PRLI bits). This allows for a more cleaner rport->dd_data management as can be seen with the simplified qla2xxx_slave_alloc() function. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Consolidate ISP24xx chip reset logic.Andrew Vasquez
Consolidate ISP24xx chip reset logic. Consolidate near-duplicate RISC reset logic from qla24xx_reset_chip() and qla24xx_chip_diag(). Also, after initiating a soft-reset, insure the firmware has completed all NVRAM accesses before continuing. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add firmware version number to qla24xx_fw_version_str().Andrew Vasquez
Add firmware version number to qla24xx_fw_version_str(). Original code was accidently trimmed during port. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] aacraid: Fix sgmap errorMark Haverkamp
The wrong sgmap structure is being assigned in aac_send_raw_srb. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Update version number to 8.01.00b5-k.Andrew Vasquez
Update version number to 8.01.00b5-k. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Correct maximum supported lun and target-id definitions.Andrew Vasquez
Correct maximum supported lun and target-id definitions. The driver uses command-IOCBs which support a maximum lun value of 0xffff -- correct #define to reflect the change. Also, remove superfluous MAX_TARGET definition. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Update copyright banner.Andrew Vasquez
Update copyright banner. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Firmware updates.Andrew Vasquez
Firmware updates. Resync with latest 21xx firmware -- 1.19.25. Resync with latest 22xx firmware -- 2.02.08. Resync with latest 23xx/63xx firmware -- 3.03.15. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Code scrubbing.Andrew Vasquez
Code scrubbing. - Remove trailing whitespace from driver files. - Remove unused #defines and inlines. - Standardize on C comments (// -> /* */) Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: NVRAM id-list updates.Andrew Vasquez
NVRAM id-list updates. Resync with latest NVRAM subsystem ID list. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add OS initialization codes for ISP24xx recognition.Andrew Vasquez
Add OS initialization codes for ISP24xx recognition. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx initialization routines.Andrew Vasquez
Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx ISR routines.Andrew Vasquez
Add ISP24xx ISR routines. Add appropriate glue-code for ISP24xx support -- this included generalizing some of the core handling routines (qla2x00_async_event() [pull-up retrieval of mailbox values] and qla2x00_status_entry()]. Fixup 2100/2300 ISRs to handle the new conventions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx IOCB manipulation routines.Andrew Vasquez
Add ISP24xx IOCB manipulation routines. Add appropriate glue-code for ISP24xx support while manipulting IOCB packets. Add an ISP24xx specific 'start_scsi' routine due to command-type-7 layout changes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx flash-manipulation routines.Andrew Vasquez
Add ISP24xx flash-manipulation routines. Add read/write flash manipulation routines for the ISP24xx. Update sysfs NVRAM objects to use generalized accessor functions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add MBX command routines for ISP24xx support.Andrew Vasquez
Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Generalize SNS generic-services routines.Andrew Vasquez
Generalize SNS generic-services routines. Consolidate completion-status checking while adding support for the ISP24xx. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx diagnostic routines.Andrew Vasquez
Add ISP24xx diagnostic routines. Add function and structure definitions for the ISP24xx diagnostic firmware dump routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx definitions.Andrew Vasquez
Add ISP24xx definitions. Add requisite structure definitions and #define's for ISP24xx support. Also drop volatile modifiers from device_reg_* register layouts as the members are never really accessed, only their offsets within the layout are used during reads and writes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add pci ids for new ISP types.Andrew Vasquez
Add pci ids for new ISP types. Move old definitions in local qla_def.h file to pci_ids.h as well. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables.Andrew Vasquez
Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] SPI transport class, don't negotiate options not supportedJames Bottomley
At the moment, the transport class blindly tries to set things like QAS and IU, even if the drive won't support them. It's best not to annoy the devices like this and instead only set what the drive says is actually supported. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] aic7xxx: remove ahc_tailqChristoph Hellwig
now that we do normal PCI probing there's no need to keep a list of all HBAs. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] aic7xxx: sane pci probingChristoph Hellwig
always probe in bus order, avoid any reordering Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] add TYPE_RBC to our type tableJames Bottomley
Here's a tiny update that means we print the correct ASCII type information Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] dpt_i2o warning fixAndrew Morton
drivers/scsi/dpt_i2o.c: In function `adpt_queue': drivers/scsi/dpt_i2o.c:385: warning: unused variable `timeout' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] aic79xx: ahd_linux_dev_reset() cleanupAndrew Morton
Use the macros consistently in ahd_linux_dev_reset(). If ahd_linux_dev_reset() really can be called with local interrupts disabled then yuk. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-03[SCSI] aic7xxx: fix boot hang with Fujitsu drivesJames Bottomley
Apparently these are the only drives that try to negotiate IU and QAS at u160 speeds. The aic7xxx driver can't cope with this. The fix is to eliminate the IU and QAS setting routines. I've #if 0'd them out, just in case we ever get the sequencer documentation out of Adaptec, since we'd then be able to fix the driver. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] IBM VSCSI Client: sending client info to serverLinda Xie
Fix the problem in IBM VSCSI Client where the client doesn't send the information which is expected by the server. Signed-off-by: Linda Xie <lxie@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] ifdef out broken fc4 EH codeChristoph Hellwig
This code pokes deep into EH internals and duplicates scsi_error.c code wrongly. It doesn't compile anymore in scsi-misc, so let's #if 0 out the code - the driver hasn't worked for more than five years anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Change version to 8.0.29.James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Update copyright noticesJames.Smart@Emulex.Com
Update copyright notice text and include year 2005. Add Copyright notice for Christoph Hellwig to several files: lpfc.h lpfc_attr.c lpfc_els.c lpfc_hbadisc.c lpfc_init.c lpfc_mbox.c lpfc_mem.c lpfc_nportdisc.c lpfc_scsi.c lpfc_sli.c Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Remove $Id$ keyword strings.James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix ADISC completion incorrectly putting initiators on mapped listJames.Smart@Emulex.Com
Symptom - An unmapped node (initiator) that goes away in a situation such as cable pull, comes back as a mapped node. Fix - On ADISC completion, put a list on the mapped list only if it is a FCP_TARGET. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Add completion handler to the abort iocbsJames.Smart@Emulex.Com
Add completion handler to the abort iocbs to close a hole where we could reuse an iotag. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix LS_RJT never sent by lpfc_els_unsol_event()James.Smart@Emulex.Com
lpfc_els_unsol_event() checks rjt_err to determine is LS_RJT should be sent. However, rjt_err was set to LSEXP_NOTHING_ELSE (which is 0) in cases where an LS_RJT should be sent, so rjt_err was never true. Change lpfc_els_unsol_event() to set rjt_err to 1 when LS_RJT should be sent. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Add LP6000 PCI IDJames.Smart@Emulex.Com
Fix driver not seeing LP6000. Fix: add PCI id to the pci_device_id table and a short description for the HBA in get_hba_model_desc(). Also add a default clause to the switch statement that parses the various PCI ID's. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Set max_sectors in host templateJames.Smart@Emulex.Com
Add max_sectors to the driver host template and initialize it with 0xFFFF since the driver has no limitations on the size a transfer contained by a scsi command and that fits within the sg_tablesize provisioned by the driver. This fixes a performance issue seen in some configurations. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix error loading on sparcJames.Smart@Emulex.Com
Bug reported via SourceForge - lpfc does not load on sparc. The lpfc driver must byteswap all FCP IOCBs to recover the data into cpu native format. Also correct issue of "iotag not found" messages Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fixes in mbox_timeout_handlerJames.Smart@Emulex.Com
Analysis: Timeout of READ_SPARM64 causes call to lpfc_mbox_timeout_handler which reads psli->mbox_active to determine the timeout mbox. Timeout handler then NULL's psli->mbox_active and calls lpfc_mbx_cmpl_read_sparam(), which on timeout condition, calls link_down(). link_down() now calls disc_done() which calls mbox_timeout_hander() again since WORKER_MBOX_TMO is still set, which goes back to read psli->mbox_active which is already NULL'ed. Remove redundant if statement in lpfc_mbox_timeout_handler. pmbox is assigned psli->mbox_active so there is no need to check if it actually equals psli->mbox_active. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] Fix issue where all hosts log nodev message for other initiatorsJames.Smart@Emulex.Com
Fix issue where all hosts connected to SAN get spammed with nodev message when other initiators go away. Display nodev message only when FC targets go away. However this behavior will be overridden if LOG_DISCOVERY is set. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: hgp/pgp cleanupsJames.Smart@Emulex.Com
From: Christoph Hellwig <hch@lst.de>: - rename PGP/HPH to lpfc_pgp/lpfc_hgp - use __le32 types for the members to start fixing sparse -Wbitwise issues - remove lpfc_sli.MBhostaddr, we can always use the pointer from SLI2_DESC directly Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-01[SCSI] - mptfusion - convert to new change_queue_depth APIMoore, Eric Dean
Convert driver to use new change_queue_depth API. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Fixed up rejections and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] aic7xxx: correct target valid check in aic7xxx_proc.cJames Bottomley
From: Andy Whitcroft <apw@shadowen.org> Updated to remove the bogus translated target check. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] use list_for_each_entry_safe in scsi_error.cChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_eh_eflags_ macrosChristoph Hellwig
Just opencoded access to eh_eflags, it's much more readable anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>