aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-05-29irda-usb: suspend/resume supportTadashi Abe
This patch adds power management suspend/resume hooks for irda-usb. Signed-off-by: Tadashi Abe <tabe@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29mac8390: use printk MAC address formatFinn Thain
mac8390: use printk MAC address format Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: convert unicast addr listJiri Pirko
This patch converts unicast address list to standard list_head using previously introduced struct netdev_hw_addr. It also relaxes the locking. Original spinlock (still used for multicast addresses) is not needed and is no longer used for a protection of this list. All reading and writing takes place under rtnl (with no changes). I also removed a possibility to specify the length of the address while adding or deleting unicast address. It's always dev->addr_len. The convertion touched especially e1000 and ixgbe codes when the change is not so trivial. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 13 +-- drivers/net/e1000/e1000_main.c | 24 +++-- drivers/net/ixgbe/ixgbe_common.c | 14 ++-- drivers/net/ixgbe/ixgbe_common.h | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/ixgbe/ixgbe_type.h | 4 +- drivers/net/macvlan.c | 11 +- drivers/net/mv643xx_eth.c | 11 +- drivers/net/niu.c | 7 +- drivers/net/virtio_net.c | 7 +- drivers/s390/net/qeth_l2_main.c | 6 +- drivers/scsi/fcoe/fcoe.c | 16 ++-- include/linux/netdevice.h | 18 ++-- net/8021q/vlan.c | 4 +- net/8021q/vlan_dev.c | 10 +- net/core/dev.c | 195 +++++++++++++++++++++++++++----------- net/dsa/slave.c | 10 +- net/packet/af_packet.c | 4 +- 18 files changed, 227 insertions(+), 137 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29bonding: use bond_is_lb() when it's appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: add support for the Aquantia 10G-BT phyDivy Le Ray
Add support for the Aquantia AQ1002 10G-BaseT phy. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: Add Aeluros 2020 phy supportDivy Le Ray
Add support for the AEL2020 phy. Add PCI IDs of the boards using this phy. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: move away from LLTXDivy Le Ray
cxgb3 no longer advertizes LLTX. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29netdev: bfin_mac: add Blackfin MII bus to platform bus to allow DSA accessGraf Yang
When we register the MII bus to the platfrom bus, the Distributed Switch Architecture can hook in transparently. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29netdev: bfin_mac: fix performance issue found by netperfMichael Hennerich
- Remove dead long delay - Use proper defines - Remove broken implementation of the TX DMA Data Alignment TXDWA feature Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29netdev: bfin_mac: fix malformed UDP packet transmission when polling with KGDBSonic Zhang
Writes to the DMA descriptors may sit in the internal Blackfin data buffers and not actually be available when the DMA engine goes to fetch them. This does not typically happen, but when dealing with short/fast packets such as UDP and polling KGDB, this occurs much more frequently. Same goes for heavy loads as seen by netperf tests or large scp transfers. So force the buffers to drain with SSYNC otherwise we get random malformed packets. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29netdev: bfin_mac: drop useless IRQF_SHARED from Blackfin EMAC interruptMichael Hennerich
The IRQ used by the Blackfin EMAC is internal to the peripheral and cannot be used to generate any other interrupt, so there is no point in marking it as IRQF_SHARED. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29veth: dont release skb->dst in veth_xmit()Eric Dumazet
No need to release skb->dst, its now done by core network. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29tcp: fix loop in ofo handling code and reduce its complexityIlpo Järvinen
Somewhat luckily, I was looking into these parts with very fine comb because I've made somewhat similar changes on the same area (conflicts that arose weren't that lucky though). The loop was very much overengineered recently in commit 915219441d566 (tcp: Use SKB queue and list helpers instead of doing it by-hand), while it basically just wants to know if there are skbs after 'skb'. Also it got broken because skb1 = skb->next got translated into skb1 = skb1->next (though abstracted) improperly. Note that 'skb1' is pointing to previous sk_buff than skb or NULL if at head. Two things went wrong: - We'll kfree 'skb' on the first iteration instead of the skbuff following 'skb' (it would require required SACK reneging to recover I think). - The list head case where 'skb1' is NULL is checked too early and the loop won't execute whereas it previously did. Conclusion, mostly revert the recent changes which makes the cset very messy looking but using proper accessor in the previous-like version. The effective changes against the original can be viewed with: git-diff 915219441d566f1da0caa0e262be49b666159e17^ \ net/ipv4/tcp_input.c | sed -n -e '57,70 p' Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29bonding: allow bond in mode balance-alb to work properly in bridge -try4.3Jiri Pirko
[PATCH net-next] bonding: allow bond in mode balance-alb to work properly in bridge -try4.3 (updated) changes v4.2 -> v4.3 - memcpy the address always, not just in case it differs from master->dev_addr - compare_ether_addr_64bits() is not used so there is no direct need to make new header file (I think it would be good to have bond stuff in separate file anyway). changes v4.1 -> v4.2 - use skb->pkt_type == PACKET_HOST compare rather then comparing skb dest addr against skb->dev->dev_addr The problem is described in following bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=487763 Basically here's what's going on. In every mode, bonding interface uses the same mac address for all enslaved devices (except fail_over_mac). Only balance-alb will simultaneously use multiple MAC addresses across different slaves. When you put this kind of bond device into a bridge it will only add one of mac adresses into a hash list of mac addresses, say X. This mac address is marked as local. But this bonding interface also has mac address Y. Now then packet arrives with destination address Y, this address is not marked as local and the packed looks like it needs to be forwarded. This packet is then lost which is wrong. Notice that interfaces can be added and removed from bond while it is in bridge. *** When the multiple addresses for bridge port approach failed to solve this issue due to STP I started to think other way to solve this. I returned to previous solution but tweaked one. This patch solves the situation in the bonding without touching bridge code. For every incoming frame to bonding the destination address is compared to current address of the slave device from which tha packet came. If these two match destination address is replaced by mac address of the master. This address is known by bridge so it is delivered properly. Note that the comparsion is not made directly, it's used skb->pkt_type == PACKET_HOST instead. This is "set" previously in eth_type_trans(). I experimentally tried that this works as good as searching through the slave list (v4 of this patch). Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29korina: periodically poll the mediaFlorian Fainelli
This patch makes the korina driver poll the media for link change. This is actually required on Mikrotik RB532 (not RB532A) for korina to operate properly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: replace dma_sync_single with dma_sync_single_for_cpuFUJITA Tomonori
This replaces dma_sync_single() with dma_sync_single_for_cpu() because dma_sync_single() is an obsolete API; include/linux/dma-mapping.h says: /* Backwards compat, remove in 2.7.x */ #define dma_sync_single dma_sync_single_for_cpu #define dma_sync_sg dma_sync_sg_for_cpu Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: unset IFF_XMIT_DST_RELEASE in ipgre_tunnel_setup()Eric Dumazet
ipgre_tunnel_xmit() might need skb->dst, so tell dev_hard_start_xmit() to no release it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29atm: unset IFF_XMIT_DST_RELEASE in clip_setup()Eric Dumazet
clip_start_xmit() needs skb->dst so tell dev_hard_start_xmit() to no release it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: unset IFF_XMIT_DST_RELEASE in ipip_tunnel_setup()Eric Dumazet
ipip_tunnel_xmit() might need skb->dst, so tell dev_hard_start_xmit() to no release it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_startEric Dumazet
Second round of drivers for Gb cards (and NIU one I forgot in the 10GB round) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_start in 10GB driversEric Dumazet
Followup of commits 9d21493b4beb8f918ba248032fefa393074a5e2b and 08baf561083bc27a953aa087dd8a664bb2b88e8e (net: tx scalability works : trans_start) (net: txq_trans_update() helper) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Multi queue drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers (vxge & tehuti) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29Merge branch 'linux-2.6.31.y' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2009-05-28llc: Kill outdated and incorrect comment.David S. Miller
This comment suggested storing two pieces of state in the LLC skb control block, and in fact we do. Someone did the implementation but never killed this todo comment :-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28irda: Use SKB queue and list helpers instead of doing it by-hand.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28tcp: Use SKB queue and list helpers instead of doing it by-hand.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28wimax: a new API call was added, increment minor protocol version numberInaky Perez-Gonzalez
As the 'state_get' API call was added, we need to increase the minor protocol version number so applications that depend on the can check it's presence. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: usb: fix device reset on autosuspend while not yet idleInaky Perez-Gonzalez
When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is requested (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax: Add netlink interface to get device statePaulius Zaleckas
wimax connection manager / daemon has to know what is current state of the device. Previously it was only possible to get notification whet state has changed. Note: By mistake, the new generic netlink's number for WIMAX_GNL_OP_STATE_GET was declared inserting into the existing list of API calls, not appending; thus, it'd break existing API. Fixed by Inaky Perez-Gonzalez <inaky@linux.intel.com> by moving to the tail, where we add to the interface, not modify the interface. Thanks to Stephen Hemminger <shemminger@vyatta.com> for catching this. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-05-28wimax/i2400m: sdio: set the block size before enabling the functionInaky Perez-Gonzalez
From a fix by Cindy H Kao: Block size has to be set before sending IOE enable because the firmware reads the block size register before it reads IOE register. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax: document why wimax_msg_*() operations can be used in any stateInaky Perez-Gonzalez
Funcion documentation for wimax_msg_alloc() and wimax_msg_send() needs to clarify that they can be used in the very early stages of a wimax_dev lifecycle. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: remove redundant readiness checks from i2400m_report_tlv_*()Inaky Perez-Gonzalez
Functions i2400m_report_tlv*() are only called from i2400m_report_hook(), called in a workqueue by i2400m_report_hook_work(). The scheduler checks for device readiness before scheduling. Added an extra check for readiness in i2400m_report_hook_work(), which makes all the checks down the line redundant. Obviously the device state could change in the middle, but error handling would take care of that. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: factor out 'state report's TLV handling to a functionInaky Perez-Gonzalez
i2400m_report_state_hook() is going to get messier as we add handling code. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: allow kernel commands to device to be logged tooInaky Perez-Gonzalez
By running 'echo 1 > /sys/kernel/debug/wimax:wmxX/i2400m/trace_msg_from_user', the driver will echo to user space all the commands being sent to the device from user space, along with the responses. However, this only helps with the commands being sent from user space; with this patch, the trace hook is moved to i2400m_msg_to_dev(), which is the single access point for running commands to the device (both by user space and the kernel driver). This allows better debugging by having a complete stream of commands/acks and reports. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: trace commands sent from user space on the "echo" pipeInaky Perez-Gonzalez
When commands are sent from user space, trace both the command sent and the answer received over the "echo" pipe instead of over the "trace" pipe when command tracing is enabled. As well, when the device sends a reports/indications, send it over the "echo" pipe. The "trace" pipe is used by the device to send firmware traces; gets confusing. Another named pipe makes it easier to split debug information. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: generate fake source MAC address with random_ether_addr()Inaky Perez-Gonzalez
The WiMAX i2400m driver needs to generate a fake source MAC address to fake an ethernet header (for destination, the card's MAC is used). This is the source of the packet, which is the basestation it came from. The basestation's mac address is not usable for this, as it uses its own namespace and it is not always available. Currently the fake source MAC address was being set to all zeros, which was causing trouble with bridging. Use random_ether_addr() to generate a proper one that creates no trouble. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28econet: Use SKB queue and list helpers instead of doing it by-hand.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28decnet: Use SKB queue and list helpers instead of doing it by-hand.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28atm: Use SKB queue and list helpers instead of doing it by-hand.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28rtl8187: Remove pointless check in rtl8187_rx_cb().David S. Miller
First of all, it exposes the SKB list implementation. Second of all it's not needed. If we get called here, we successfully enqueued the URB with the linked SKB and such a completion only gets called one time on such an SKB. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28p54: Use SKB list handling helpers instead of by-hand code.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27wavelan: Remove bogus debugging on skb->next being non-NULL.David S. Miller
This eliminates explicit references to the SKB list handling implementation. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27aoe: Remove superfluous clearing of skb fields in new_skb().David S. Miller
This code uses alloc_skb() which clears them out for us. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27appletalk: Add proper locking around IPDDP routing table.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27net: correct a comment for the final #endifJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27net: net/core/sock.c cleanupEric Dumazet
Pure style cleanup patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27net: use netdev stats in b44, sundance, via-rhine and via-velocityEric Dumazet
Use struct net_device_stats provided in struct net_device instead of private ones. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27net: ALIGN/PTR_ALIGN cleanup in alloc_netdev_mq()/netdev_priv()Eric Dumazet
Use ALIGN() and PTR_ALIGN() macros instead of handcoding them. Get rid of NETDEV_ALIGN_CONST ugly define Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27bridge: avoid an extra space in br_fdb_update()Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27r6040: check and update media statusFlorian Fainelli
This patch removes the not-that-useful message in the r6040_timer which prints the PHY status. Instead replace it with a call to mii_check_media which will update the link status and print it on startup. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27tcp: Do not check flush when comparing options for GROHerbert Xu
There is no need to repeatedly check flush when comparing TCP options for GRO as it will be false 99% of the time where it matters. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 01:17:47 +0000