aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-09-30iwlwifi: use correct DMA_MASKWinkler, Tomas
Use correct DMA_MASK: 4964 and 5000 support 36 bit addresses for pci express memory access. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-30iwlwifi: enable power save setting upon configEster Kummer
This patch enables power save setting from config (iwconfig power) The sysfs power_level interface is still preserved as it has mac80211 power implementation is not yet rich enough. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-30iwlwifi: refactor rx register initializationWinkler, Tomas
The patch adds HW bug W/A FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY so that we can enable again interrupt coalescing. It also uses named constants for open code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-30p54: Fix sparse warningsLarry Finger
The command make C=2 CF="-D__CHECK_ENDIAN__" drivers/net/wireless/p54/ generates the following warnings: .../p54common.c:152:38: warning: incorrect type in argument 1 (different base types) .../p54common.c:152:38: expected restricted __be32 const [usertype] *p .../p54common.c:152:38: got unsigned int *<noident> .../p54common.c:184:15: warning: restricted __le32 degrades to integer .../p54common.c:185:29: warning: cast to restricted __le16 .../p54common.c:309:11: warning: symbol 'p54_rf_chips' was not declared. Should it be static? .../p54common.c:313:5: warning: symbol 'p54_parse_eeprom' was not declared. Should it be static? .../p54common.c:620:43: warning: incorrect type in argument 3 (different base types) .../p54common.c:620:43: expected unsigned long [unsigned] [usertype] len .../p54common.c:620:43: got restricted __le16 [usertype] len .../p54common.c:780:41: warning: restricted __le16 degrades to integer .../p54common.c:781:32: warning: restricted __le16 degrades to integer .../p54common.c:1250:28: warning: incorrect type in argument 2 (different base types) .../p54common.c:1250:28: expected unsigned short [unsigned] [usertype] filter_type .../p54common.c:1250:28: got restricted __le16 [usertype] filter_type .../p54common.c:1252:28: warning: incorrect type in argument 2 (different base types) .../p54common.c:1252:28: expected unsigned short [unsigned] [usertype] filter_type .../p54common.c:1252:28: got restricted __le16 [usertype] filter_type .../p54common.c:1257:42: warning: incorrect type in argument 2 (different base types) .../p54common.c:1257:42: expected unsigned short [unsigned] [usertype] filter_type .../p54common.c:1257:42: got restricted __le16 .../p54common.c:1260:42: warning: incorrect type in argument 2 (different base types) .../p54common.c:1260:42: expected unsigned short [unsigned] [usertype] filter_type .../p54common.c:1260:42: got restricted __le16 .../p54usb.c:228:10: warning: restricted __le32 degrades to integer .../p54usb.c:228:23: warning: restricted __le32 degrades to integer .../p54usb.c:228:7: warning: incorrect type in assignment (different base types) .../p54usb.c:228:7: expected restricted __le32 [assigned] [usertype] chk .../p54usb.c:228:7: got unsigned int .../p54usb.c:221:8: warning: symbol 'p54u_lm87_chksum' was not declared. Should it be static? All of the above have been fixed. One question, however, remains: In struct bootrec, the array "data" is treated in many places as native CPU order, but it may be little-endian everywhere. As far as I can tell, this driver has only been used with little-endian hardware. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-30b43: Fix Bluetooth coexistence SPROM coding error for Motorola 7010 variant ↵Larry Finger
of BCM4306 An additional BCM4306 has been found with the Bluetooth coexistence SPROM coding error. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-30netdev: docbook comment update (revised)Stephen Hemminger
Add more docbook comments to network device functions and cleanup the comments. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-30netdev: use const for some name functionsStephen Hemminger
dev_change_name and netdev_drivername should use const char on parameters that are read-only input values. The strcpy to newname is not needed since newname is not used later in function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-09-25Revert "ehea: fix mutex and spinlock use"David S. Miller
This reverts commit 2eefbd63d0c85daa1317636474c226e236beba81. On request by driver author and Jeff Garzik. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-24e1000: remove unused Kconfig option for disabling packet splitBrandeburg, Jesse
Since the e1000/e1000e split, no hardware supported by e1000 supports packet split, just remove the Kconfig option and associated code from the driver. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24drivers/net/bonding: sparse fixes for exported tablesBen Dooks
The following sparse warnings are being generated because bonding.h is missing definitons for items declared in bond_main.c but also used in bond_sysfs.h Also export bond_dev_list as this is also declared in bond_main but used elsewhere in drivers/net/bonding. bond_main.c:105:20: warning: symbol 'bonding_defaults' was not declared. Should it be static? bond_main.c:148:1: warning: symbol 'bond_dev_list' was not declared. Should it be static? bond_main.c:162:22: warning: symbol 'bond_lacp_tbl' was not declared. Should it be static? bond_main.c:168:22: warning: symbol 'bond_mode_tbl' was not declared. Should it be static? bond_main.c:179:22: warning: symbol 'xmit_hashtype_tbl' was not declared. Should it be static? bond_main.c:186:22: warning: symbol 'arp_validate_tbl' was not declared. Should it be static? bond_main.c:194:22: warning: symbol 'fail_over_mac_tbl' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24[netdrvr] convert sbmac tx to spin_lock_irqsave to prevent early IRQ enableWeiwei Wang
Netpoll will call the interrupt handler with interrupts disabled when using kgdboe, so spin_lock_irqsave() should be used instead of spin_lock_irq() to prevent interrupts from being incorrectly enabled. Signed-off-by: Weiwei Wang <weiwei.wang@windriver.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24fs-enet: remove code associated with !CONFIG_PPC_MERGEKumar Gala
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove the dead code associated with !CONFIG_PPC_MERGE. With this change the pre_request_irq() and post_free_irq() calls became nops so they have been removed. Also removed fs_request_irq() and fs_free_irq() and just called request_irq() and free_irq(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24netdev: drop CONFIG_PPC_MERGE from KconfigKumar Gala
Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all powerpc platforms so we don't need to depend on it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24atl2: add tx bytes statisticJay Cliburn
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24forcedeth fix: take phy out of reset during power upAyaz Abdulla
This patch will add the phy reset bit into the power up mask which is used during power up. Certain BIOSes will place the phy in reset and therefore the driver must take the phy out of reset when it loads. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24e1000e: avoid duplicated output of device name in kernel warningFrans Pop
With 2.6.27-rc3 I noticed the following messages in my boot log: 0000:01:00.0: 0000:01:00.0: Warning: detected DSPD enabled in EEPROM 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:04:ff:09 The second seems correct, but the first has a silly repetition of the PCI device before the actual message. The message originates from e1000_eeprom_checks in e1000e/netdev.c. With this patch below the first message becomes e1000e 0000:01:00.0: Warning: detected DSPD enabled in EEPROM which makes it similar to directly preceding messages. Use dev_warn instead of e_warn in e1000_eeprom_checks() as the interface name has not yet been assigned at that point. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24atl1e: remove the unneeded (struct atl1e_adapter *)Jie Yang
Remove the unneeded (struct atl1e_adapter *) casts, for hw->adapter already has type atl1e_adapter *. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24gianfar: free/iounmap memory after an error in mii bus initializationAndy Fleming
Recent changes to MII bus initialization code added exit points which didn't free or iounmap the bus before returning. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11372. Signed-off-by: Andy Fleming <afleming@freescale.com> Reported-by: Daniel Marjamki <danielm77@spray.se> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ne.c: fix rmmod, platform driver improvementsDavid Fries
Removing the module would cause a kernel oops as platform_driver_probe failed to detect a device and unregistered the platform driver on module init, and cleanup_module would unregister the already unregistered driver. The suspend and resume functions weren't being called. platform_driver support was added earlier, but without any platform_device_register* calls I don't think it was being used. Now all devices are registered using platform_device_register_simple and pointers are kept to unregister the ones that the probe failed for or unregister all devices on module shutdown. init_module no longer calls ne_init to reduce confusion (and multiple unregister paths that caused the rmmod oops). With the devices now registered they are added to the platform driver and get suspend and resume events. netif_device_detach(dev) was added before unregister_netdev(dev) when removing the region as occationally I would see a race condition where the device was still being used in unregister_netdev. Signed-off-by: David Fries <david@fries.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24gianfar: Fix error in mdio reset timeoutTrent Piepho
The loop with the timeout used "while (... && timeout--)", which means than when the timeout occurs, "timeout" will be -1 after the loop has exited. The code that checks if the looped exited because of a timeout used "if (timeout <= 0)". Seems ok, except timeout is unsigned, and (unsigned)-1 isn't less than zero! Using "--timeout" in the loop fixes this problem, as now "timeout" will be 0 when the loop times out. This also fixes a bug in the existing code, where it will erroneously think a timeout occurred if the condition the loop was waiting for is satisfied on the final iteration before a timeout. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24e1000e: remove failed request for sw/fw/hw flagBruce Allan
When the driver fails to acquire the control flag used to serialize NVM and PHY accesses between the driver, firmware and hardware, remove the request for the flag otherwise the hardware might grant the flag when it becomes available but the driver will not release the flag. This could cause the firmware to prevent the driver getting the flag for all future attempts. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24enic: bug fix: don't set netdev->name too earlyScott Feldman
Bug fix: don't set netdev->name early before netdev registration. Setting netdev->name early with dev_alloc_name() would occasionally cause netdev registration to fail returning error that device was already registered. Since we're using netdev->name to name MSI-X vectors, we now need to move the request_irq after netdev registartion, so move it to ->open. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24enic: Bug fix: Free MSI intr with correct data handleScott Feldman
Bug fix: Free MSI intr with correct data handle Use davem proposed naming for MSI-X tx/rx vectors (ethX-tx-0, ethX-rx-0) Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24enic: fixes for review items from Ben HutchingsScott Feldman
Fixes for review items from Ben Hutchings: - use netdev->net_stats rather than private net_stats - use ethtool op .get_sset_count rather than .get_stats_count - err out if setting Tx/Rx csum or TSO using ethtool and setting is not enabled for device. - pass in jiffies + constant to round_jiffies - return err if new MTU is out-of-bounds Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24enic: Don't indicate IPv6 pkts using soft-LROScott Feldman
LRO is only applied to IPv4 pkts, so don't use the LRO indication functions for anything other IPv4 pkts. Every non-IPv4 pkt is indicated using non- LRO functions. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24r6040: fix wrong assignment in r6040_free_txbufsFlorian Fainelli
This patch fixes a wrong assignment in r6040_free_txbufs on a receive skb pointer while we should actually do this on the transmit skb pointer. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24qeth: avoid qeth recovery problemsUrsula Braun
Do not touch IFF_UP flag during qeth recovery, but invoke dev_close() in case of failing recovery. Cancel outstanding control commands in case of Data Checks or Channel Checks. Do not invoke qeth_l2_del_all_mc() in case of a hard stop to speed up removal of qeth devices. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24qeth: use firmware MAC-address for layer2 hsi-devicesUrsula Braun
Real HiperSocket devices in layer2 mode have a firmware-created MAC-address. This change enables the qeth driver to use this firmware MAC-address for layer2 HiperSocket devices. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24Merge branch 'for-2.6.28' of git://git.marvell.com/mv643xx_eth into ↵Jeff Garzik
upstream-next
2008-09-24Merge branch 'davem-next' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-09-24bonding: add more ethtool supportStephen Hemminger
This patch allows reporting the link, checksum, and feature settings of bonded device by using generic hooks. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24netxen: enable msi-x for quad-gig boardsDhananjay Phadke
NX3031 firmware now supports MSI-X interrupts on Quad GbE boards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24sundance: set carrier status on link change eventsDan Nicholson
Check if the link is available when a changed interrupt has been received and set the carrier status appropriately. The code is copied nearly verbatim from the dl2k module. The link status could be used in more places in the driver, but this is enough to get the carrier status reported to userspace. Fixes kernel bug #7487: http://bugzilla.kernel.org/show_bug.cgi?id=7487 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dan Nicholson <dbn.lists@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24drivers/net: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ehea: Enable DLPAR memory removeHannes Hering
This patch adds the capability flag to the capability list for dynamic LPAR memory remove to enable this feature. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24[netdrvr] usb/hso: throttle to prevent loss of serial dataDenis Joseph Barrow
Patch to stop loss of characters on the hso modems, this patch throttles & unthrottles the modem by not putting out urbs until the tty/line discipline layer has enough space for newly received packets. serial ports. This is required for firmware diagnostics being done at Option. Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24myri10ge: use DCA if DCA is compiled as a moduleBrice Goglin
Use DCA in myri10ge when CONFIG_DCA_MODULE is set as well. And thus force INTEL_IOATDMA to =y so that DCA=y if we are =y. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24cxgb3 - remove duplicate tests in lroDivy Le Ray
The generic lro code checks TCP flags/options. Remove duplicate tests done in the driver. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24r8169: select MII in KconfigFrancois Romieu
drivers/built-in.o: In function `rtl8169_gset_xmii': r8169.c:(.text+0x82259): undefined reference to `mii_ethtool_gset' Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ehea: fix mutex and spinlock useSebastien Dugue
Looks like to me that the ehea_fw_handles.lock mutex and the ehea_bcmc_regs.lock spinlock are taken much longer than necessary and could as well be pushed inside the functions that need them (ehea_update_firmware_handles() and ehea_update_bcmc_registrations()) rather than at each callsite. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: fix DCA dependency in KconfigJesse Brandeburg
ixgbe can depend on dca IF it is enabled. So if we are compiled as IXGBE=y, and DCA is enabled, then we must force INTEL_IOATDMA and therefore DCA to be =y also. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: whitespace/formatting cleanupAlexander Duyck
This patch cleans up some whitespace items, reorders a couple of functions, and removes some outdated comments. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: correctly add and remove napi queuesAlexander Duyck
This patch corrects support for NAPI so that queues are correctly added and removed during suspend/resume in the event that the number of MSI-X vectors changes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: Whitespace, copyright update and version number change patchPeter P Waskiewicz
This patch cleans up a bit of whitespace issues with the driver, updates the copyright information, and bumps the version number up. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: bump versionJeff Kirsher
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: xmit frame refactorJesse Brandeburg
ixgbe_xmit_frame can be refactored to use fewer locals and better utilize common kernel macros. also fixed minor buglet with internal to driver vlan flag variable being passed incorrectly. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: lower stack space usageJesse Brandeburg
some functions were un-necessarily using local variables. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: cleanup definesJesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24ixgbe: move set_num_queues and call it after msix failureJesse Brandeburg
This is partial preparation for a future patch which will extend ixgbe_set_num_queues Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 14:32:14 +0000