aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-10eHEA: Capability flag for DLPAR supportJan-Bernd Themann
This patch introduces a capability flag that is used by the DLPAR userspace tool to check which DLPAR features are supported by the eHEA driver. Missing goto has been included. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Remove sk98lin ethernet driver.Jeff Garzik
Unmaintained, superceded by skge. Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sunhme.c:quattro_pci_find() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10bonding / ipv6: no addrconf for slaves separately from masterJay Vosburgh
At present, when a device is enslaved to bonding, if ipv6 is active then addrconf will be initated on the slave (because it is closed then opened during the enslavement processing). This causes DAD and RS packets to be sent from the slave. These packets in turn can confuse switches that perform ipv6 snooping, causing them to incorrectly update their forwarding tables (if, e.g., the slave being added is an inactve backup that won't be used right away) and direct traffic away from the active slave to a backup slave (where the incoming packets will be dropped). This patch alters the behavior so that addrconf will only run on the master device itself. I believe this is logically correct, as it prevents slaves from having an IPv6 identity independent from the master. This is consistent with the IPv4 behavior for bonding. This is accomplished by (a) having bonding set IFF_SLAVE sooner in the enslavement processing than currently occurs (before open, not after), and (b) having ipv6 addrconf ignore UP and CHANGE events on slave devices. The eql driver also uses the IFF_SLAVE flag. I inspected eql, and I believe this change is reasonable for its usage of IFF_SLAVE, but I did not test it. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10atl1: remove write-only var in tx handlerAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10macmace: use "unsigned long flags;"Alexey Dobriyan
Code will do local_irq_save() on it. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Cleanup usbnet_probe() return value handlingPeter Korsgaard
usbnet_probe() handles a positive return value from the driver bind() function as success, but will later only setup the status handler if the return value was zero, leading to confusion. Patch adjusts this to accept positive values as success in both checks. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10netxen: deinline and sparse fixStephen Hemminger
Get rid of dubious casts to (void *) which causes a sparse warning. And move largeish function from inline to the one file that uses the code, the compiler can then decide to inline it. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10eeprom_93cx6: shorten pulse timing to match spec (bis)Francois Romieu
Based on an original idea by John W. Linville. It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: Add Marvell 88E1112 phy idOlof Johansson
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the 88E1111 inits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: cleanup marvell.c a bitOlof Johansson
Simplify the marvell driver init a bit: Make the supported devices an array instead of explicitly registering each structure. This makes it considerably easier to add new devices down the road. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10AX88796 network driverBen Dooks
Support for the Asix AX88796 network controller, an NE2000 compatible 10/100 ethernet device with internal PHY. The driver supports PHY settings via either ioctl() or the ethtool driver ops. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10[MIPS] PNX8550: Cleanup proc code.Robert P. J. Day
Here's a slightly cleaner way of creating the /proc structure for the pnx8850. mostly, it creates a directory with default mode 555, since the one you're creating is mode 444, which is somewhat unusual for a directory under /proc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] WRPPMC: Fix build.Ralf Baechle
Using another systems defines is a safe way to get your code broken by accident when that system is removed. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Yosemite: Fix modpost warnings.Ralf Baechle
MODPOST vmlinux WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x974): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x980): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x978): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x984): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x98c): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x990): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Change names of local variables to silence sparseAtsushi Nemoto
This patch is an workaround for these sparse warnings: linux/include/linux/calc64.h:25:17: warning: symbol '__quot' shadows an earlier one linux/include/linux/calc64.h:25:17: originally declared here linux/include/linux/calc64.h:25:17: warning: symbol '__mod' shadows an earlier one linux/include/linux/calc64.h:25:17: originally declared here Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] SB1: Fix modpost warning.Ralf Baechle
MODPOST vmlinux WARNING: arch/mips/mm/built-in.o(.text+0x1978): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp') WARNING: arch/mips/mm/built-in.o(.text+0x1988): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] PNX: Fix modpost warnings.Ralf Baechle
MODPOST vmlinux WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd40): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init') WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd44): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Alchemy: Fix modpost warnings.Ralf Baechle
MODPOST vmlinux WARNING: arch/mips/au1000/common/built-in.o(.text+0x1750): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr') WARNING: arch/mips/au1000/common/built-in.o(.text+0x1754): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Non-FPAFF: Fix warning.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] DEC: Fix modpost warning.Ralf Baechle
LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map MODPOST vmlinux WARNING: drivers/built-in.o(.data+0x2480): Section mismatch: reference to .init.text: (between 'sercons' and 'ds_parms') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] MIPSsim: Enable MIPSsim virtual network driver.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Delete Ocelot 3 support.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] remove LASAT Networks platforms supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Early check for SMTC kernel on non-MT processorChris Dearman
Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Add debugfs files to show fpuemu statisticsAtsushi Nemoto
Export contents of struct mips_fpu_emulator_stats via debugfs. There is no way to read these statistics for now but they (at least the "emulated" count) might be sometimes useful for performance tuning on FPU-less CPUs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Add some debugfs files to debug unaligned accessesAtsushi Nemoto
Currently a number of unaligned instructions is counted but not used. Add /debug/mips/unaligned_instructions file to show the value. And add /debug/mips/unaligned_action to control behavior upon an unaligned access. Possible actions are: 0: silently fixup the unaligned access. 1: send SIGBUS. 2: dump registers, process name, etc. and fixup. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] rbtx4938: Fix secondary PCIC and glue internal NICsAtsushi Nemoto
* Fix pci ops for secondary PCIC * Do not reserve 1MB for PCI MEM region (leave PCIBIOS_MIN_MEM zero) * Use platform_device to provide ethernet addresses for internal NICs. (background: TX49XX SoCs include PCI NIC (TC35815 compatible) connected via its internal PCI bus, but the NIC's PROM interface is not connected to SEEPROM. So we must provide its ethernet address by another way.) * Check return value of early_read_config_word() Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] tc35815: Load MAC address via platform_deviceAtsushi Nemoto
TX49XX SoCs include PCI NIC (TC35815 compatible) connected via its internal PCI bus, but the NIC's PROM interface is not connected to SEEPROM. So we must provide its ethernet address by another way. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Move FPU affinity code into separate file.Ralf Baechle
Gets rid of some of the CONFIG_MIPS_MT_FPAFF #ifdefery. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Make ioremap() work on TX39/49 special unmapped segmentAtsushi Nemoto
TX39XX and TX49XX have "reserved" segment in CKSEG3 area. 0xff000000-0xff3fffff on TX49XX and 0xff000000-0xfffeffff on TX39XX are reserved (unmapped, uncached). Controllers on these SoCs are placed in this segment. This patch add plat_ioremap() and plat_iounmap() to override default behavior and implement these hooks for TX39/TX49. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] rbtx4938: Update and minimize defconfigAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] rbtx4938: Convert SPI codes to use generic SPI driversAtsushi Nemoto
Use rtc-rs5c348 and at25 spi protocol driver and spi_txx9 spi controller driver instead of platform dependent codes. This patch also removes dependencies to old RTC interfaces such as rtc_mips_get_time, etc. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] rbtx4938: Add generic GPIO supportAtsushi Nemoto
GPIO 0..15 are for TX4938 PIO pins, GPIO 16..18 are for FPGA-driven chipselect signals for SPI devices. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] SNI RM updatesThomas Bogendoerfer
- use RTC_CLASS instead of GEN_RTC - get rid of ds1216 in favour of a RTC_CLASS driver - use correct console device for older RM400 - use physical addresses for 82596 device - use 128 byte L1 cache line size (this is needed because most of the SNI caches are using 128 L2 cache lines) Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] PMC MSP71xx default configurationMarc St-Jean
Patch to add default configuration for the PMC-Sierra MSP71xx devices. Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] PMC MSP71xx PCI supportMarc St-Jean
Patch to add PCI support for the PMC-Sierra MSP71xx devices. Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] PMC MSP71xx mips commonMarc St-Jean
Patch to add mips common support for the PMC-Sierra MSP71xx devices. Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] PMC MSP71xx core platformMarc St-Jean
Patch to add core platform support for the PMC-Sierra MSP71xx devices. Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Removes the few leftovers of the MOMENCO_JAGUAR_ATX removal.Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] New files for lemote fulong mini-PC supportSongmao Tian
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com> Signed-off-by: Songmao Tian <tiansm@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] define Hit_Invalidate_I to Index_Invalidate_I for loongson2Fuxin Zhang
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Convert init_thread initialization to ISO C initializers.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Enable support for the userlocal hardware registerRalf Baechle
Which will cut down the cost of RDHWR $29 which is used to obtain the TLS pointer and so far being emulated in software down to a single cycle operation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] FP affinity: Coding style cleanups Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Put an end to <asm/serial.h>'s long and annyoing existenceRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Remove Momenco Ocelot C supportFranck Bui-Huu
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/configs/ocelot_c_defconfig delete mode 100644 arch/mips/momentum/ocelot_c/Makefile delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c delete mode 100644 arch/mips/momentum/ocelot_c/irq.c delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h delete mode 100644 arch/mips/momentum/ocelot_c/platform.c delete mode 100644 arch/mips/momentum/ocelot_c/prom.c delete mode 100644 arch/mips/momentum/ocelot_c/reset.c delete mode 100644 arch/mips/momentum/ocelot_c/setup.c delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c delete mode 100644 arch/mips/pci/fixup-ocelot-c.c delete mode 100644 arch/mips/pci/pci-ocelot-c.c
2007-07-10[MIPS] IP32: Remove experimental tag from kconfig.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] PCI: Make dev pointer argument of pcibios_map_irq const.Ralf Baechle
This is to break the code of people who think they are supposed to scribble into the pci device structure - it's off limits. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] EV64120: Remove supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 17:26:24 +0000