aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-19ath9k: fix RTS/CTS handlingFelix Fietkau
The Tx DMA descriptor has two kinds of flags that select RTS/CTS usage. The first one (global for the frame) selects whether RTS/CTS or CTS-to-self should be used, the second one enables RTS/CTS or CTS-to-self usage for an individual multi-rate-retry entry. Previously the code preparing the descriptor only enabled the global flag, if the first MRR series selected the local one. Fix this by enabling the global flag if any of the MRR entries need it. With this patch, rate control can properly select the use of RTS/CTS for all MRR entries except the first one, which is the default behavior. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19cfg80211: rcu-ify rdev and wdevJohannes Berg
Future code will need to look up rdev and wdev within atomic sections, but currently we need to lock a mutex for such lookups. Change the list handling for both to be RCU-safe so that we can look them up in rcu sections instead in the future. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: store seq mode for proper restoring (follow specs)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: move RF sequence declarations top, add missing callsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement chain selectionRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement stopping playbackRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement MIMO config updateRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement TX PHY cleanup and setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement RX PHY cleanup and setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19mac80211: re-enable re-transmission of filtered framesJohannes Berg
In an earlier commit, mac80211: disable software retry for now Pavel Roskin reported a problem that seems to be due to software retry of already transmitted frames. It turns out that we've never done that correctly, but due to some recent changes it now crashes in the TX code. I've added a comment in the patch that explains the problem better and also points to possible solutions -- which I can't implement right now. I disabled software retry of failed/filtered frames because it was broken. With the work of the previous patches, it now becomes fairly easy to re-enable it by adding a flag indicating that the frame shouldn't be modified, but still running it through the transmit handlers to populate the control information. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19mac80211: move control.hw_key assignmentJohannes Berg
When mac80211 asks a driver to encrypt a frame, it must assign the control.hw_key pointer for it to know which key to use etc. Currently, mac80211 does this whenever it would software-encrypt a frame. Change the logic of this code to assign the hw_key pointer when selecting the key, and later check it when deciding whether to encrypt the frame or let it be encrypted by the hardware. This allows us to later simply skip the encryption function since it no longer modifies the TX control. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19mac80211: remove useless setting of IEEE80211_TX_INTFL_DONT_ENCRYPTJohannes Berg
There's no value in setting a flag that will never be checked after this point, this seems to be legacy code -- I think previously the flag was used to check whether to encrypt the frame or not. Now, however, the flag need not be set, and setting it actually interferes if the frame will be processed again later. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19mac80211: clear TX control on filtered framesJohannes Berg
When an skb survived a round-trip through the driver and needs to be re-used, its control information is definitely not valid any more, the driver will have overwritten it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19mac80211: move and rename misc tx handlerJohannes Berg
This TX handler is used only for assigning the station pointer in the control information, so give it a better name. Also move it before rate control. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19mac80211: pid: replace open-coded msecs_to_jiffiesBob Copeland
Code directly scaling by HZ and rounding can be more efficiently and clearly performed with msecs_to_jiffies. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: update copyright year to 2010Reinette Chatre
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: remove extra statistics request from debugfsWey-Yi Guy
When reading current ucode statistics information from debugfs, in current implementation, it will always send a new "statistics request" to uCode. In normal operation, uCode should report the statistics per beacon interval. Remove this extra request to reduce the additional command exchanges between driver and uCode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: display flowhandler register when sw error or on-demandWey-Yi Guy
Flowhandler handle the communication between driver and uCode, when any uCode error happen, we also like to know what is the status of the flowhandler; it can help to debug flowhandler related problem. Also adding debugfs file to dump current value of flowhandler registers. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: software w/a for h/w bug cause Rx bit get clearWey-Yi Guy
This is a w/a for a hardware bug. the h/w bug may cause the Rx bit (bit 15 before shifting it to 31) to clear when using interrupt coalescing. This does not mean frames are lost - their processing is just delayed until next interrupt arrives. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: set interrupt coalescing timer range and defaultWey-Yi Guy
For interrupt coalescing timer, the CSR_INT_COALESCING is an 8 bit register in 32-usec unit, the range can go from 0x00 - 0xFF. set the range and default timeout value for both calibration mode and operation mode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: correct return code for log_eventWey-Yi Guy
When dumping event log in debugfs, iwl_dump_nic_event_log() should return the correct error code instead of let the calling function makes it own assumption. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: add num_of_sos_stats to statistics counterWey-Yi Guy
When uCode detects number of beacon missed consecutively above the internal missed beacon threshold (set by uCode), it will reset and re-tune the radio in order to get out of bad PHY state. This "num_of_sos_states" counter monitors number of time uCode encounters this bad condition and has to re-tune the radio. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: format and show statistics counter from uCodeWey-Yi Guy
To help debug uCode related problem, adding "delta" and "max" information in debugfs statistics counters display. Those information show the delta between two statistics report from uCode, user can monitor the counters for any "un-normal" behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Jay Sternberg<jay.e.sternberg@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19iwlwifi: fix clear statistics counter commandWey-Yi Guy
When receive reply statistics command with "clear" mask, just reset the accumulated statistics counters, but not the current statistics counters, so the accumulated statistics counter can provide the correct information. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19mac80211: fix WMM AC default for non-QoS data framesFelix Fietkau
The WMM AC selection added to the monitor mode selection function accidentally assigns non-QoS data frames to the same AC as mgmt frames (VO). This is not serious, but should be fixed anyway. This patch assigns them to the BE AC instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
2010-01-18zd1211rw: adding 0409:0248 to supported device listHin-Tak Leung
Yasuhiro ABE <yadiary@gmail.com> reported success in sourceforge zd1211-dev list. The device is a NEC Aterm WL54GU usb wireless stick. The brand and retail product name NEC, Aterm PA-WL54GU The USB ID's (duh) ID 0409:0248 The chip ID string zd1211rw 1-1:1.0: zd1211b chip 0409:0248 v4810 high 00-1b-8b AL2230S_RF pa0 g--N- The FCC ID unknown Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Yasuhiro ABE <yadiary@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18p54pci: rx frame length checkChristian Lamparter
A long time ago, a user reported several crashes due to data corruptions which are likely the result of a not-100%-supported, or faulty? PCI bridge. ( http://patchwork.kernel.org/patch/53004/ ) This patch fixes entry #1. "1. p54p_check_rx_ring - skb_over_panic: Under a ping flood or just left running for a bit would panic with a skb_over_panic." As described in the mail: The invalid frame length causes skb_put to bailout and trigger a crash. Note: Simply dropping the frame is problematic, because if its content contains a tx feedback we would lose some portion of the device memory space.... And the driver/mac80211 should handle all other invalid data. Reported-by: Quintin Pitts <geek4linux@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18mac80211: fix sign error in pid controllerBob Copeland
While testing the pid rate controller in mac80211_hwsim, I noticed that once the controller reached 54 Mbit rates, it would fail to lower the rate when necessary. The debug log shows: 1945 186786 pf_sample 50 3534 3577 50 My interpretation is that the fixed point scaling of the target error value (pf) is incorrect: the error value of 50 compared to a target of 14 case should result in a scaling value of (14-50) = -36 * 256 or -9216, but instead it is (14 * 256)-50, or 3534. Correct this by doing fixed point scaling after subtraction. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18iwlwifi: add license to tracing filesReinette Chatre
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18iwlwifi: Fix throughput stall issue in HT mode for 5000Wey-Yi Guy
Similar to 6000 and 1000 series, RTS/CTS is the recommended protection mechanism for 5000 series in HT mode based on the HW design. Using RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment, it also prevent uCode encounter TX FIFO underrun and other HT mode related performance issues. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: drop unused definition, uncomment needed callRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement TX power control coef setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RX IQ calibrationi for rev < 3Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add huge calculating TX IQ LORafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement calculating IQ gain paramsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: update TX calibration ladderRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RX radio cores calibrationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add TX LP FBW (TX filter 40 related)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement getting TX gainsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement calculating RX IQ compRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement RX IQ estimationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement restoring general configurationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>a Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement workaround for TX IQRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement RX IQ coeffsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add function than forces (not) staying in carrier searchRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RSSI calibration restoreRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>` Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement PA overriding (RF control related)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: RSSI calibration for rev < 3Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RSSI polling and setting 2055 (radio) VCMRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 09:22:47 +0000