aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-11drm/nouveau: No need to force evict=true when swapping evicted BOs back in.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Fix "general protection fault" in the flipd/flips eviction path.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/i2c/ch7006: Drop build time dependency to nouveau.Francisco Jerez
This partially reverts e4b41066, as this driver is intended to be useful with any KMS driver for suitable hardware. The missing build dependency that commit workarounded was DRM_KMS_HELPER. Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Make the MM aware of pre-G80 tiling.Francisco Jerez
This commit has also the following 3 bugfix commits squashed into it from the nouveau git tree: drm/nouveau: Fix up the tiling alignment restrictions for nv1x. drm/nouveau: Fix up the nv2x tiling alignment restrictions. drm/nv50: fix align typo for g9x Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Pre-G80 tiling support.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Add cache_flush/pull fifo engine functions.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-08Merge remote branch 'korg/drm-radeon-testing' into drm-testingDave Airlie
2010-01-08Merge remote branch 'korg/drm-core-next' into drm-testingDave Airlie
2010-01-08drm/kms/fb: check for depth changes from userspace for resizing.Dave Airlie
If userspace (plymouth in this case) asks for a deeper depth, refuse it as well due to lack of resizing. This fixes an issue since < 32MB cards went to 8bpp and plymouth crashes on startup. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm: Keep disabled outputs disabled after suspend / resumeDavid John
With the current DRM code, an output that has been powered off from userspace will automatically power back on when resuming from suspend. This patch fixes this behaviour. Tested only with the Intel i915 driver on an Intel GM45 Express chipset. Signed-off-by: David John <davidjon@xenontk.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: Don't try to enable IRQ if we have no handler installedJerome Glisse
If for any reason we haven't installed handler we shouldn't try to enable IRQ/MSI on the hw so we don't get unhandled IRQ/MSI which makes the kernel sad. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm: Avoid calling vblank function is vblank wasn't initializedJerome Glisse
In some case vblank might not be initialized and we shouldn't try to use associated function. This patch make sure this is the case. It also export drm_vblank_cleanup so driver can cleanup vblank if for any reason IRQ/MSI is not working. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon: mkregtable.c: close a file before exitAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: Make sure we release AGP device if we acquired itJerome Glisse
In some case we weren't releasing the AGP device at module unloading. This leaded to unfunctional AGP at next module load. This patch make sure we release the AGP bus if we acquire it. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: Schedule host path read cache flush through the ring V2Jerome Glisse
R300 family will hard lockup if host path read cache flush is done through MMIO to HOST_PATH_CNTL. But scheduling same flush through ring seems harmless. This patch remove the hdp_flush callback and add a flush after each fence emission which means a flush after each IB schedule. Thus we should have same behavior without the hard lockup. Tested on R100,R200,R300,R400,R500,R600,R700 family. V2: Adjust fence counts in r600_blit_prepare_copy() Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: Workaround RV410/R420 CP errata (V3)Corbin Simpson
Long story short, this fixes sporadic hardlocks with my rv410 during times of intense 2D acceleration (Flash on Fx3). V2: Fix indentation and move errata_fini to suspend function so we don't leak scratch register over suspend/resume cycle. V3: Move scratch_reg to asic specific structure (aim is to slowly move stuff to asic specific structure and avoid poluting radeon_device struct with asic specific variables) Signed-off-by: Corbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: detect sideport memory on IGP chipsAlex Deucher
This detects if the sideport memory is enabled and if it is VRAM is evicted on suspend/resume. This should fix s/r issues on some IGPs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon: fix a couple of array index errorsDarren Jenkins
There are a couple of array overruns, and some associated confusion in the code. This is just a wild guess at what the code should actually look like. Coverity CID: 13305 13306 agd5f: fix up the original intent of the timing code Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: add support for eDP (embedded DisplayPort)Alex Deucher
This is displayport used for internal connections such as laptop panels and systems with integrated monitors. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm: Add eDP connector typeAlex Deucher
Add a new connector type for eDP (embedded displayport) eDP is more or less the same as DP but there are some cases when you might want to handle it separately. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: pull in the latest upstream ObjectID.h changesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: whitespace changes to ObjectID.hAlex Deucher
Makes it easier to keep in sync with ddx and the upstream AMD versions. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: fix typo in atom connector type handlingAlex Deucher
Also remove the problematic enums that were unused remnants from the ddx. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07Merge remote branch 'korg/drm-radeon-next' into drm-linusDave Airlie
* korg/drm-radeon-next: drm/radeon/kms: rs600: use correct mask for SW interrupt gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test drm/radeon/radeon_device.c: move a dereference below a NULL test drm/radeon/radeon_fence.c: move a dereference below the NULL test drm/radeon/radeon_connectors.c: add a NULL test before dereference drm/radeon/kms: fix memory leak drm/radeon/kms: add missing breaks in i2c and ss lookups drm/radeon/kms: add primary dac adj values table drm/radeon/kms: fallback to default connector table
2010-01-07drm/radeon/kms: rs600: use correct mask for SW interruptLuca Tettamanti
The mask happens to be the same, but the IH is reading the status, not the not the control register. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL testDarren Jenkins
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13338 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/radeon/radeon_device.c: move a dereference below a NULL testDarren Jenkins
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13335 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/radeon/radeon_fence.c: move a dereference below the NULL testDarren Jenkins
If a NULL value is possible, the dereference should only occur after the NULL test. Coverity CID: 13334 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/radeon/radeon_connectors.c: add a NULL test before dereferenceDarren Jenkins
The encoder variable can be NULL in this function so I believe it should be checked before dereference. Coverity CID: 13253 [airlied: extremely unlikely to happen] Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/radeon/kms: fix memory leakJiri Slaby
Stanse found a memory leak in radeon_master_create. master_priv is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07Merge branch 'drm-core-next' into drm-linusDave Airlie
* drm-core-next: drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line() drm/edid: Fix CVT width/height decode drm/edid: Skip empty CVT codepoints drm: remove address mask param for drm_pci_alloc()
2010-01-07drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()Roel Kluin
This always evaluates to true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/edid: Fix CVT width/height decodeAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm/edid: Skip empty CVT codepointsAdam Jackson
Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07drm: remove address mask param for drm_pci_alloc()Zhenyu Wang
drm_pci_alloc() has input of address mask for setting pci dma mask on the device, which should be properly setup by drm driver. And leave it as a param for drm_pci_alloc() would cause confusion or mistake would corrupt the correct dma mask setting, as seen on intel hw which set wrong dma mask for hw status page. So remove it from drm_pci_alloc() function. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06drm/radeon/kms: add missing breaks in i2c and ss lookupsAlex Deucher
Should fix fdo bug 25741 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06drm/radeon/kms: add primary dac adj values tableAlex Deucher
Look up primary dac adj values from the table if there is no bios or bios dac table to reference. The lookup table may need to be adjusted for certain families. Should fix kernel bug 14945. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-06drm/radeon/kms: fallback to default connector tableAlex Deucher
if necessary for combios Some early combios radeon cards don't have a connector table or dac table in the bios, if they do not, fallback to the default tables. Should fix kernel bug 14963. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23Merge remote branch 'korg/drm-radeon-next' into drm-linusDave Airlie
* korg/drm-radeon-next: drm/radeon/kms: add definitions for v4 power tables drm/radeon/kms: never combine LVDS with another encoder drm/radeon/kms: Check module arguments to be valid V2 drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4) drm/radeon/kms: add 3DC compression support drm/radeon/kms: allow rendering while no colorbuffer is set on r300 drm/radeon/kms: enable memory clock reading on legacy (V2) drm/radeon/kms: prevent parallel AtomBIOS calls drm/radeon/kms: set proper default tv standard drm/radeon/kms: fix legacy rmx drm/radeon/kms/atom: fill in proper defines for digital setup
2009-12-23drm/radeon/kms: add definitions for v4 power tablesAlex Deucher
[airlied: just adding this for completeness to avoid drift between public atombios.h files] Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: never combine LVDS with another encoderAlex Deucher
When linking multiple encoders to a connector, make sure to not link LVDS with another connector. Some bioses have the same i2c line for LVDS and VGA. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: Check module arguments to be valid V2Jerome Glisse
This patch add a function which check module argument to be valid. On invalid argument it prints a warning and setback the default value. V2: Allow 0 for vram limit & agp mode which are the default value Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structureJerome Glisse
Add boolean to record if some part of the driver are initialized or not this allow to avoid a crash when trying to cleanup uninitialized structure members. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4)Alex Deucher
This fixes LVDS on some mac laptops without a panel edid. v2 - Set proper mode type flags v3 - Note that this is not neceesarily the exact panel mode, but an approximation based on the cvt formula. For these systems we should ideally read the mode info out of the registers or add a mode table, but this works and is much simpler. v4 - Update comments and debug message. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: add 3DC compression supportMarek Olšák
There are 2 formats: ATI1N: 64 bits per 4x4 block, one-channel format ATI2N: 128 bits per 4x4 block, two-channel format Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: allow rendering while no colorbuffer is set on r300Marek Olšák
Because hardware cannot disable all colorbuffers directly to do depth-only rendering, a user should: - disable reading from a colorbuffer in blending - disable fastfill - set the color channel mask to 0 to prevent writing to a colorbuffer Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: enable memory clock reading on legacy (V2)Rafał Miłecki
V2: detect IGP cards (which don't have own memory) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: prevent parallel AtomBIOS callsRafał Miłecki
This just adds a mutex around the atombios table execution so we don't call it from two contexts at once. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: set proper default tv standardAlex Deucher
we were just using 1 before. reported on irc by soreau Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23drm/radeon/kms: fix legacy rmxAlex Deucher
This makes 640x480 on my R100 work again, both in aspect and centered mode. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Tested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 02:43:17 +0000