| Age | Commit message (Collapse) | Author |
|---|
|
--- linux-2.6.22/drivers/i2c/chips/pcf50606.c.orig 2008-01-17 22:30:16.000000000 -0800
+++ linux-2.6.22/drivers/i2c/chips/pcf50606.c 2008-01-17 22:31:43.000000000 -0800
@@ -71,12 +71,19 @@
I2C_CLIENT_INSMOD_1(pcf50606);
-#define PCF50606_F_CHG_FAST 0x00000001 /* Charger Fast allowed */
-#define PCF50606_F_CHG_PRESENT 0x00000002 /* Charger present */
-#define PCF50606_F_CHG_FOK 0x00000004 /* Fast OK for battery */
-#define PCF50606_F_CHG_ERR 0x00000008 /* Charger Error */
-#define PCF50606_F_CHG_PROT 0x00000010 /* Charger Protection */
-#define PCF50606_F_CHG_READY 0x00000020 /* Charging completed */
+#define PCF50606_B_CHG_FAST 0 /* Charger Fast allowed */
+#define PCF50606_B_CHG_PRESENT 1 /* Charger present */
+#define PCF50606_B_CHG_FOK 2 /* Fast OK for battery */
+#define PCF50606_B_CHG_ERR 3 /* Charger Error */
+#define PCF50606_B_CHG_PROT 4 /* Charger Protection */
+#define PCF50606_B_CHG_READY 5 /* Charging completed */
+
+#define PCF50606_F_CHG_FAST (1<<PCF50606_B_CHG_FAST) /* Charger Fast allowed */
+#define PCF50606_F_CHG_PRESENT (1<<PCF50606_B_CHG_PRESENT) /* Charger present */
+#define PCF50606_F_CHG_FOK (1<<PCF50606_B_CHG_FOK) /* Fast OK for battery */
+#define PCF50606_F_CHG_ERR (1<<PCF50606_B_CHG_ERR) /* Charger Error */
+#define PCF50606_F_CHG_PROT (1<<PCF50606_B_CHG_PROT) /* Charger Protection */
+#define PCF50606_F_CHG_READY (1<<PCF50606_B_CHG_READY) /* Charging completed */
#define PCF50606_F_CHG_MASK 0x000000fc
#define PCF50606_F_PWR_PRESSED 0x00000100
@@ -1026,12 +1033,12 @@
static DEVICE_ATTR(chgmode, S_IRUGO | S_IWUSR, show_chgmode, set_chgmode);
static const char *chgstate_names[] = {
- [PCF50606_F_CHG_FAST] = "fast_enabled",
- [PCF50606_F_CHG_PRESENT] = "present",
- [PCF50606_F_CHG_FOK] = "fast_ok",
- [PCF50606_F_CHG_ERR] = "error",
- [PCF50606_F_CHG_PROT] = "protection",
- [PCF50606_F_CHG_READY] = "ready",
+ [PCF50606_B_CHG_FAST] = "fast_enabled",
+ [PCF50606_B_CHG_PRESENT] = "present",
+ [PCF50606_B_CHG_FOK] = "fast_ok",
+ [PCF50606_B_CHG_ERR] = "error",
+ [PCF50606_B_CHG_PROT] = "protection",
+ [PCF50606_B_CHG_READY] = "ready",
};
static ssize_t show_chgstate(struct device *dev, struct device_attribute *attr,
|
|
|
|
|
|
|
|
|
|
Add Bluetooth in monolithic kernel
|
|
SD Card / VFAT in monolithic kernel
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Make a defconfig for 2.6.24 out of the current 2.6.22.5 one
From: warmcat <andy@warmcat.com>
|
|
Update to new DFU VID for A5
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add a couple of handy scripts to crossmake and send over dfu
From: warmcat <andy@warmcat.com>
|
|
Adds svn defconfig
From: warmcat <andy@warmcat.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
[ Stop kernel from hanging every once in a while during Glamo
initialization. ]
debug-glamo-fb-cmdqueue-wait-timeout.patch
From: warmcat <andy@warmcat.com>
|
|
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=1172
This patch seems to alleviate the symptoms but doesn't cure them.
Keep it to keep development going, until we have a proper solution.
|
|
|
|
This is a temporary work-around Mike Westerhof for this bug:
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=788
See also
http://lists.openmoko.org/pipermail/openmoko-kernel/2008-February/000804.html
(It's the 2nd option.)
We may settle on a different solution in the future, depending on
feedback from upstream.
|
|
|
|
|
|
S3C24xx ECC mis-calculates the bit to flip:
http://lists.infradead.org/pipermail/linux-mtd/2007-October/019586.html
If the error couldn't be corrected, we returned "no problem" :-(
http://lists.infradead.org/pipermail/linux-mtd/2007-October/019615.html
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On GTA02 we use FIQ to manage the vibrator IO now. That
is necessary because we stole timer3 from doing hw pwm
for vibrator. This keeps the same UI in /sys but does
"bitbang pwm" on the same vibrator GPIO
From: Andy Green <andy@openmoko.com>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This makes the FIQ stuff specific to one of the timers on the
s3c244x and adds the platform stuff for fiq in the gta02 init
Currently one sysfs node is exposed, a count of FIQ events
cat /sys/devices/platform/sc32440_fiq.0/fiq/count
From: Andy Green <andy@openmoko.com>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Adds a C-based FIQ ISR which is very convenient (and unusual --
normally you have to do FIQ ISR in assembler only).
Based on my article:
http://warmcat.com/_wp/2007/09/17/at91rm9200-fiq-faq-and-simple-example-code-patch/
Implemented as a platform device and driver.
Suspend / resume is tested and works.
Signed-off-by: Andy Green <andy@warmcat.com>
|
|
Fail the build noisily if "mkimage" can't be found, e.g., if we forgot to add
the u-boot directory to PATH.
|
|
|
|
Disable the hardware ECC checking on S3C2440 based platforms (HXD8, SMDK2440,
GTA02) for the time being, since our u-boot doesn't yet support it for 2k page
size NAND
|
|
This patch disables the reporting of touchscreen-like devices via
/dev/input/mice. In the Neo1973 (much like other handheld devices),
we need this to distinguish between the touchscreen (which uses tslib)
and optional additional usb/bluetooth mice that might be attached.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
|
|
Modify GTA02 power manager for bluetooth.
1. Default power value isn't correct. Now we set pcf50633 LDO4 to 3.2 voltage.
2. Separate GTA01 and GTA02 source code.
3. Add pcf50633 API for enable register.
|
|
Moved shared PMU code from pcf50606.h and pcf50633.h (which prevented inclusion
of both at the same time) to pcf506xx.h
- include/linux/pcf50606.h (struct pmu_voltage_rail, enum pmu_event, pmu_cb):
moved to pcf506xx.h
- include/linux/pcf50633.h (struct pmu_voltage_rail, enum pmu_event, pmu_cb):
moved to pcf506xx.h
Signed off-by: Werner Almesberger <werner@openmoko.org>
|
|
|
|
|
|
This is a Linux driver for the STmicro LIS302DL 3-axis accelerometer.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
|
|
|
|
[ FIXME:
include/asm-arm/arch-s3c2410/irqs.h shouldn't contain device-specific
changes. ]
This is a Linux kernel driver for the Smedia Glamo336x / Glamo337x
multi-function peripheral device.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
Add the Samsung S3C2442B CPU idcode to the samsung s3c24xx platform code
and fix a Kconfig typo related tot the 2442.
|
|
This is a patch that seems to make the USB hangs on the S3C2440 go away. At
least a good amount of ping torture didn't make them come back so far.
The issue is that, if there are several back-to-back packets,
sometimes no interrupt is generated for one of them. This
seems to be caused by the mysterious dual packet mode, which
the USB hardware enters automatically if the endpoint size is
half that of the FIFO. (On the 2440, this is the normal
situation for bulk data endpoints.)
There is also a timing factor in this. I think what happens is
that the USB hardware automatically sends an acknowledgement
if there is only one packet in the FIFO (the FIFO has space
for two). If another packet arrives before the host has
retrieved and acknowledged the previous one, no interrupt is
generated for that second one.
However, there may be an indication. There is one undocumented
bit (none of the 244x manuals document it), OUT_CRS1_REG[1],
that seems to be set suspiciously often when this condition
occurs. There is also CLR_DATA_TOGGLE, OUT_CRS1_REG[7], which
may have a function related to this. (The Samsung manual is
rather terse on that, as usual.)
This needs to be examined further. For now, the patch seems to do the
trick.
Note that this is not a clean solution by any means, because we
might potentially get stuck in that interrupt for quite a while.
|
