aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-24KVM: MMU: Add for_each_shadow_entry(), a simpler alternative to walk_shadow()Avi Kivity
Using a for_each loop style removes the need to write callback and nasty casts. Implement the walk_shadow() using the for_each_shadow_entry(). Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: Advertise guest debug capability per-archJan Kiszka
Limit KVM_CAP_SET_GUEST_DEBUG only to those archs (currently x86) that support it. This simplifies user space stub implementations. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: Fix vmload and friends misinterpreted as lidtAvi Kivity
The AMD SVM instruction family all overload the 0f 01 /3 opcode, further multiplexing on the three r/m bits. But the code decided that anything that isn't a vmmcall must be an lidt (which shares the 0f 01 /3 opcode, for the case that mod = 3). Fix by aborting emulation if this isn't a vmmcall. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: MMU: Initialize a shadow page's global attribute from cr4.pgeAvi Kivity
If cr4.pge is cleared, we ought to treat any ptes in the page as non-global. This allows us to remove the check from set_spte(). Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: MMU: Segregate mmu pages created with different cr4.pge settingsAvi Kivity
Don't allow a vcpu with cr4.pge cleared to use a shadow page created with cr4.pge set; this might cause a cr3 switch not to sync ptes that have the global bit set (the global bit has no effect if !cr4.pge). This can only occur on smp with different cr4.pge settings for different vcpus (since a cr4 change will resync the shadow ptes), but there's no cost to being correct here. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: MMU: Inherit a shadow page's guest level count from vcpu setupAvi Kivity
Instead of "calculating" it on every shadow page allocation, set it once when switching modes, and copy it when allocating pages. This doesn't buy us much, but sets up the stage for inheriting more information related to the mmu setup. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: ia64: Code cleanupXiantao Zhang
Remove some unnecessary blank lines to accord with Kernel's coding style. Also remove vcpu_get_itir_on_fault due to no reference to it. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: Remove old kvm_guest_debug structsJan Kiszka
Remove the remaining arch fragments of the old guest debug interface that now break non-x86 builds. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: ia64: stack get/restore patchJes Sorensen
Implement KVM_IA64_VCPU_[GS]ET_STACK ioctl calls. This is required for live migrations. Patch is based on previous implementation that was part of old GET/SET_REGS ioctl calls. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: x86: Wire-up hardware breakpoints for guest debuggingJan Kiszka
Add the remaining bits to make use of debug registers also for guest debugging, thus enabling the use of hardware breakpoints and watchpoints. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: x86: Virtualize debug registersJan Kiszka
So far KVM only had basic x86 debug register support, once introduced to realize guest debugging that way. The guest itself was not able to use those registers. This patch now adds (almost) full support for guest self-debugging via hardware registers. It refactors the code, moving generic parts out of SVM (VMX was already cleaned up by the KVM_SET_GUEST_DEBUG patches), and it ensures that the registers are properly switched between host and guest. This patch also prepares debug register usage by the host. The latter will (once wired-up by the following patch) allow for hardware breakpoints/watchpoints in guest code. If this is enabled, the guest will only see faked debug registers without functionality, but with content reflecting the guest's modifications. Tested on Intel only, but SVM /should/ work as well, but who knows... Known limitations: Trapping on tss switch won't work - most probably on Intel. Credits also go to Joerg Roedel - I used his once posted debugging series as platform for this patch. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: VMX: Allow single-stepping when uninterruptibleJan Kiszka
When single-stepping over STI and MOV SS, we must clear the corresponding interruptibility bits in the guest state. Otherwise vmentry fails as it then expects bit 14 (BS) in pending debug exceptions being set, but that's not correct for the guest debugging case. Note that clearing those bits is safe as we check for interruptibility based on the original state and do not inject interrupts or NMIs if guest interruptibility was blocked. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: New guest debug interfaceJan Kiszka
This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic part, controlling the "main switch" and the single-step feature. The arch specific part adds an x86 interface for intercepting both types of debug exceptions separately and re-injecting them when the host was not interested. Moveover, the foundation for guest debugging via debug registers is layed. To signal breakpoint events properly back to userland, an arch-specific data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block contains the PC, the debug exception, and relevant debug registers to tell debug events properly apart. The availability of this new interface is signaled by KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are provided. Note that both SVM and VTX are supported, but only the latter was tested yet. Based on the experience with all those VTX corner case, I would be fairly surprised if SVM will work out of the box. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: VMX: Support for injecting software exceptionsJan Kiszka
VMX differentiates between processor and software generated exceptions when injecting them into the guest. Extend vmx_queue_exception accordingly (and refactor related constants) so that we can use this service reliably for the new guest debugging framework. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Only allow setting of EFER_SVME when CPUID SVM is setAlexander Graf
Userspace has to tell the kernel module somehow that nested SVM should be used. The easiest way that doesn't break anything I could think of is to implement if (cpuid & svm) allow write to efer else deny write to efer Old userspaces mask the SVM capability bit, so they don't break. In order to find out that the SVM capability is set, I had to split the kvm_emulate_cpuid into a finding and an emulating part. (introduced in v6) Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Allow setting the SVME bitAlexander Graf
Normally setting the SVME bit in EFER is not allowed, as we did not support SVM. Not since we do, we should also allow enabling SVM mode. v2 comes as last patch, so we don't enable half-ready code v4 introduces a module option to enable SVM v6 warns that nesting is enabled Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Allow read access to MSR_VM_VRJoerg Roedel
KVM tries to read the VM_CR MSR to find out if SVM was disabled by the BIOS. So implement read support for this MSR to make nested SVM running. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Add VMEXIT handler and interceptsAlexander Graf
This adds the #VMEXIT intercept, so we return to the level 1 guest when something happens in the level 2 guest that should return to the level 1 guest. v2 implements HIF handling and cleans up exception interception v3 adds support for V_INTR_MASKING_MASK v4 uses the host page hsave v5 removes IOPM merging code v6 moves mmu code out of the atomic section Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Add VMRUN handlerAlexander Graf
This patch implements VMRUN. VMRUN enters a virtual CPU and runs that in the same context as the normal guest CPU would run. So basically it is implemented the same way, a normal CPU would do it. We also prepare all intercepts that get OR'ed with the original intercepts, as we do not allow a level 2 guest to be intercepted less than the first level guest. v2 implements the following improvements: - fixes the CPL check - does not allocate iopm when not used - remembers the host's IF in the HIF bit in the hflags v3: - make use of the new permission checking - add support for V_INTR_MASKING_MASK v4: - use host page backed hsave v5: - remove IOPM merging code v6: - save cr4 so PAE l1 guests work v7: - return 0 on vmrun so we check the MSRs too - fix MSR check to use the correct variable Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Add VMLOAD and VMSAVE handlersAlexander Graf
This implements the VMLOAD and VMSAVE instructions, that usually surround the VMRUN instructions. Both instructions load / restore the same elements, so we only need to implement them once. v2 fixes CPL checking and replaces memcpy by assignments v3 makes use of the new permission checking Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Implement hsaveAlexander Graf
Implement the hsave MSR, that gives the VCPU a GPA to save the old guest state in. v2 allows userspace to save/restore hsave v4 dummys out the hsave MSR, so we use a host page v6 remembers the guest's hsave and exports the MSR Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Implement GIF, clgi and stgiAlexander Graf
This patch implements the GIF flag and the clgi and stgi instructions that set this flag. Only if the flag is set (default), interrupts can be received by the CPU. To keep the information about that somewhere, this patch adds a new hidden flags vector. that is used to store information that does not go into the vmcb, but is SVM specific. I tried to write some code to make -no-kvm-irqchip work too, but the first level guest won't even boot with that atm, so I ditched it. v2 moves the hflags to x86 generic code v3 makes use of the new permission helper v6 only enables interrupt_window if GIF=1 Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Add helper functions for nested SVMAlexander Graf
These are helpers for the nested SVM implementation. - nsvm_printk implements a debug printk variant - nested_svm_do calls a handler that can accesses gpa-based memory v3 makes use of the new permission checker v6 changes: - streamline nsvm_debug() - remove printk(KERN_ERR) - SVME check before CPL check - give GP error code - use new EFER constant Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Move EFER and MSR constants to generic x86 codeAlexander Graf
MSR_EFER_SVME_MASK, MSR_VM_CR and MSR_VM_HSAVE_PA are set in KVM specific headers. Linux does have nice header files to collect EFER bits and MSR IDs, so IMHO we should put them there. While at it, I also changed the naming scheme to match that of the other defines. (introduced in v6) Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: SVM: Clean up VINTR settingAlexander Graf
The current VINTR intercept setters don't look clean to me. To make the code easier to read and enable the possibilty to trap on a VINTR set, this uses a helper function to set the VINTR intercept. v2 uses two distinct functions for setting and clearing the bit Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-23Linux 2.6.29Linus Torvalds
2009-03-23Build with -fno-dwarf2-cfi-asmKyle McMartin
With a sufficiently new compiler and binutils, code which wasn't previously generating .eh_frame sections has begun to. Certain architectures (powerpc, in this case) may generate unexpected relocation formats in response to this, preventing modules from loading. While the new relocation types should probably be handled, revert to the previous behaviour with regards to generation of .eh_frame sections. (This was reported against Fedora, which appears to be the only distro doing any building against gcc-4.4 at present: RH bz#486545.) Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Alexandre Oliva <aoliva@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-23trivial: fix orphan dates in ext2 documentationJody McIntyre
Revert the change to the orphan dates of Windows 95, DOS, compression. Add a new orphan date for OS/2. Signed-off-by: Jody McIntyre <scjody@sun.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
2009-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crash with /proc/iomem sparc64: Reschedule KGDB capture to a software interrupt. sbus: Auto-load openprom module when device opened.
2009-03-23fix ptrace slownessMiklos Szeredi
This patch fixes bug #12208: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12208 Subject : uml is very slow on 2.6.28 host This turned out to be not a scheduler regression, but an already existing problem in ptrace being triggered by subtle scheduler changes. The problem is this: - task A is ptracing task B - task B stops on a trace event - task A is woken up and preempts task B - task A calls ptrace on task B, which does ptrace_check_attach() - this calls wait_task_inactive(), which sees that task B is still on the runq - task A goes to sleep for a jiffy - ... Since UML does lots of the above sequences, those jiffies quickly add up to make it slow as hell. This patch solves this by not rescheduling in read_unlock() after ptrace_stop() has woken up the tracer. Thanks to Oleg Nesterov and Ingo Molnar for the feedback. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-23Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines
2009-03-23powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machinesKumar Gala
Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic ppc32 SW" (commit a4bd6a93c3f14691c8a29e53eb04dc734b27f0db) It was missing the code to actually deal with the fixup of _PAGE_COHERENT based on the CPU feature. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22ucc_geth: Fix oops when using fixed-link supportAnton Vorontsov
commit b1c4a9dddf09fe99b8f88252718ac5b357363dc4 ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22dm9000: locking bugfixDavid Brownell
This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22net: update dnet.c for bus_id removalStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kconfig: improve seed in randconfig kconfig: fix randconfig for choice blocks
2009-03-22Merge branch 'fix-includes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: merge the non-MMU and MMU versions of siginfo.h m68k: use the MMU version of unistd.h for all m68k platforms m68k: merge the non-MMU and MMU versions of signal.h m68k: merge the non-MMU and MMU versions of ptrace.h m68k: use MMU version of setup.h for both MMU and non-MMU m68k: merge the non-MMU and MMU versions of sigcontext.h m68k: merge the non-MMU and MMU versions of swab.h m68k: merge the non-MMU and MMU versions of param.h
2009-03-22Update my email addressGertjan van Wingerde
Update all previous incarnations of my email address to the correct one. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-22eCryptfs: NULL crypt_stat dereference during lookupTyler Hicks
If ecryptfs_encrypted_view or ecryptfs_xattr_metadata were being specified as mount options, a NULL pointer dereference of crypt_stat was possible during lookup. This patch moves the crypt_stat assignment into ecryptfs_lookup_and_interpose_lower(), ensuring that crypt_stat will not be NULL before we attempt to dereference it. Thanks to Dan Carpenter and his static analysis tool, smatch, for finding this bug. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by: Dustin Kirkland <kirkland@canonical.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-22eCryptfs: Allocate a variable number of pages for file headersTyler Hicks
When allocating the memory used to store the eCryptfs header contents, a single, zeroed page was being allocated with get_zeroed_page(). However, the size of an eCryptfs header is either PAGE_CACHE_SIZE or ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE (8192), whichever is larger, and is stored in the file's private_data->crypt_stat->num_header_bytes_at_front field. ecryptfs_write_metadata_to_contents() was using num_header_bytes_at_front to decide how many bytes should be written to the lower filesystem for the file header. Unfortunately, at least 8K was being written from the page, despite the chance of the single, zeroed page being smaller than 8K. This resulted in random areas of kernel memory being written between the 0x1000 and 0x1FFF bytes offsets in the eCryptfs file headers if PAGE_SIZE was 4K. This patch allocates a variable number of pages, calculated with num_header_bytes_at_front, and passes the number of allocated pages along to ecryptfs_write_metadata_to_contents(). Thanks to Florian Streibelt for reporting the data leak and working with me to find the problem. 2.6.28 is the only kernel release with this vulnerability. Corresponds to CVE-2009-0787 Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by: Dustin Kirkland <kirkland@canonical.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Eugene Teo <eugeneteo@kernel.sg> Cc: Greg KH <greg@kroah.com> Cc: dann frazier <dannf@dannf.org> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Florian Streibelt <florian@f-streibelt.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-22radeonfb: Whack the PCI PM register until it sticksBenjamin Herrenschmidt
This fixes a regression introduced when we switched to using the core pci_set_power_state(). The chip seems to need the state to be written over and over again until it sticks, so we do that. Note that the code is a bit blunt, without timeout, etc... but that's pretty much because I put back in there the code exactly as it used to be before the regression. I still add a call to pci_set_power_state() at the end so that ACPI gets called appropriately on x86. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Raymond Wooninck <tittiatcoke@gmail.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-21dnet: DNET should depend on HAS_IOMEMIlya Yanok
Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21dca: add missing copyright/license headersMaciej Sosnowski
In two dca files copyright and license headers are missing. This patch adds them there. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-03-20nl80211: Check that function pointer != NULL before using itJouni Malinen
NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS handlers did not verify whether a function pointer is NULL (not supported by the driver) before trying to call the function. The former nl80211 command is available for unprivileged users, too, so this can potentially allow normal users to kill networking (or worse..) if mac80211 is built without CONFIG_MAC80211_MESH=y. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19sungem: missing net_device_opsStephen Hemminger
Sungem driver only got partially converted to net_device_ops. Since this could cause bugs, please push this to 2.6.29 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycleSathya Perla
This is a patch to reconfigure vlan-ids during an i/f down/up cycle Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19be2net: replenish when posting to rx-queue is starved in out of mem conditionsSathya Perla
This is a patch to replenish the rx-queue when it is in a starved state (due to out-of-mem conditions) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19aio: lookup_ioctx can return the wrong value when looking up a bogus contextJeff Moyer
The libaio test harness turned up a problem whereby lookup_ioctx on a bogus io context was returning the 1 valid io context from the list (harness/cases/3.p). Because of that, an extra put_iocontext was done, and when the process exited, it hit a BUG_ON in the put_iocontext macro called from exit_aio (since we expect a users count of 1 and instead get 0). The problem was introduced by "aio: make the lookup_ioctx() lockless" (commit abf137dd7712132ee56d5b3143c2ff61a72a5faa). Thanks to Zach for pointing out that hlist_for_each_entry_rcu will not return with a NULL tpos at the end of the loop, even if the entry was not found. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Zach Brown <zach.brown@oracle.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 04:27:47 +0000