aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-09-22IB/ipath: trivial cleanupsBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: remove stale references to userspace SMABryan O'Sullivan
When we first submitted a userspace subnet management agent, it was rejected, so we left it out of the final driver submission. This patch removes a number of vestigial references to it. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: simplify debugging code after ipath_core and ib_ipath mergerBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: simplify layering codeBryan O'Sullivan
A lot of ipath layer code was only called in one place. Now that the ipath_core and ib_ipath drivers are merged, it's more sensible to simply inline the simple stuff that the layer code was doing. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: merge ipath_core and ib_ipath driversBryan O'Sullivan
There is little point in keeping the two drivers separate, so we are merging them. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: drop requirement that PIO buffers be mmaped write-onlyBryan O'Sullivan
Some userlands try to mmap these pages read-write, so accommodate them. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: fix handling of kpiobufsBryan O'Sullivan
Change comment: no longer imply that user can set ipath_kpiobufs to zero. Actually set ipath_kpiobufs from parameter. Previously only altered per-device ipath_lastport_piobuf, which was over-written in chip init. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: fix for crash on module unload, if cfgports < portcntBryan O'Sullivan
Allocate enough pointers for all possible ports, to avoid problems in cleanup/unload. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: lock resource limit counters correctlyBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: More changes to support InfiniPath on PowerPC 970 systemsBryan O'Sullivan
Ordering of writethrough store buffers needs to be forced, and we need to use ifdef to get writethrough behavior to InfiniPath buffers, because there is no generic way to specify that at this time (similar to code in char/drm/drm_vm.c and block/z2ram.c). Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: Performance improvements via mmap of queuesRalph Campbell
Improve performance of userspace post receive, post SRQ receive, and poll CQ operations for ipath by allowing userspace to directly mmap() receive queues and completion queues. This eliminates the copying between userspace and the kernel in the data path. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Pass userspace data to modify_srq and modify_qp methodsRalph Campbell
Pass a struct ib_udata to the low-level driver's ->modify_srq() and ->modify_qp() methods, so that it can get to the device-specific data passed in by the userspace driver. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Allow resize CQ operation to return driver-specific dataRalph Campbell
Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level drivers can return data from a resize CQ operation to userspace. Have ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump the userspace ABI. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ehca: Add driver for IBM eHCA InfiniBand adaptersHeiko J Schick
Add a driver for IBM GX bus InfiniBand adapters, which are usable with some pSeries/System p systems. Signed-off-by: Heiko J Schick <schickhj.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/srp: Add port/device attributesIshai Rabinovitz
Add local_ib_device and local_ib_port attributes to srp scsi_host. These are needed when we want to connect to the same target through multiple distinct ports. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Include the header we really wantJames Lentini
Signed-off-by: James Lentini <jlentini@netapp.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Fix lockdep warning when QP is created with 2 CQsRoland Dreier
Lockdep warns when userspace creates a QP that uses different CQs for send completions and receive completions, because both CQs are locked and their mutexes belong to the same lock class. However, we know that the mutexes are distinct and the nesting is safe (there is no possibility of AB-BA deadlock because the mutexes are locked with down_read()), so annotate the situation with SINGLE_DEPTH_NESTING to get rid of the lockdep warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Use idr_read_cq() where appropriateRoland Dreier
There were two functions that open-coded idr_read_cq() in terms of idr_read_uobj() rather than using the helper. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipoib: Fix flush/start xmit race (from code review)Michael S. Tsirkin
Prevent flush task from freeing the ipoib_neigh pointer, while ipoib_start_xmit() is accessing the ipoib_neigh through the pointer it has loaded from the skb's hardware address. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Don't use privileged UAR for kernel accessMichael S. Tsirkin
Make kernel use UAR2 instead of UAR1 for hardware access: this adds sanity checking from the hardware side, without any performance cost. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Fix lid used for sending trapsJack Morgenstein
The SM LID used to send traps to is incorrectly set to port LID. This is a regression from 2.6.17 -- after a PortInfo MAD is received, no traps are sent to the SM LID. The traps go to the loopback interface instead, and are dropped there. The SM LID should be taken from the sm_lid of the PortInfo response. The bug was introduced by commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5: IB/mthca: Add client reregister event generation Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22Merge git://git.infradead.org/~dwmw2/hdronelineLinus Torvalds
* git://git.infradead.org/~dwmw2/hdroneline: [HEADERS] One line per header in Kbuild files to reduce conflicts Manual (trivial) conflict resolution in include/asm-s390/Kbuild
2006-09-22Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Remove overzealous BUG_ON() ocfs2: Don't print on unknown remote blocking call ocfs2: Remove EXPERIMENTAL dependency ocfs2: implement directory read-ahead ocfs2: properly update i_mtime on buffered write ocfs2: Fix directory link count checks in ocfs2_link() ocfs2: move nlink check in ocfs2_mknod() ocfs2: Fix heartbeat sector calculation [PATCH] fs/ocfs2/ioctl.c should #include "ioctl.h" ocfs2: add ext2 attributes configfs: Prevent duplicate subsystem names.
2006-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (64 commits) [BLOCK] dm-crypt: trivial comment improvements [CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available [CRYPTO] padlock: Convert padlock-sha to use crypto_hash [CRYPTO] users: Use crypto_comp and crypto_has_* [CRYPTO] api: Add crypto_comp and crypto_has_* [CRYPTO] users: Use crypto_hash interface instead of crypto_digest [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest [CRYPTO] digest: Remove old HMAC implementation [CRYPTO] doc: Update documentation for hash and me [SCTP]: Use HMAC template and hash interface [IPSEC]: Use HMAC template and hash interface [CRYPTO] tcrypt: Use HMAC template and hash interface [CRYPTO] hmac: Add crypto template implementation [CRYPTO] digest: Added user API for new hash type [CRYPTO] api: Mark parts of cipher interface as deprecated [PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument [CRYPTO] drivers: Remove obsolete block cipher operations [CRYPTO] users: Use block ciphers where applicable [SUNRPC] GSS: Use block ciphers where applicable [IPSEC] ESP: Use block ciphers where applicable ...
2006-09-22Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits) [S390] hypfs crashes with invalid mount option. [S390] cio: subchannel evaluation function operates without lock [S390] cio: always query all paths on path verification. [S390] cio: update path groups on logical CHPID changes. [S390] cio: subchannels in no-path state. [S390] Replace nopav-message on VM. [S390] set modalias for ccw bus uevents. [S390] Get rid of DBG macro. [S390] Use alternative user-copy operations for new hardware. [S390] Make user-copy operations run-time configurable. [S390] Cleanup in signal handling code. [S390] Cleanup in page table related code. [S390] Linux API for writing z/VM APPLDATA Monitor records. [S390] xpram off by one error. [S390] Remove kexec experimental flag. [S390] cleanup appldata. [S390] fix typo in vmcp. [S390] Kernel stack overflow handling. [S390] qdio slsb processing state. [S390] Missing initialization in common i/o layer. ...
2006-09-22Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: Remove accidentally-added include/linux/utsrelease.h Revert "[MTD] blkdev helper code: fix printk format warning" [MTD] Add SSFDC (SmartMedia) read-only translation layer [MTD] pmc551 pci cleanup [MTD] pmc551 use kzalloc [MTD] pmc551 whitespace cleanup [MTD] Remove iq80310 map driver [MTD NAND] Fix in typo ndfc.c causing wrong ECC layout [MTD] physmap: add power management support ioremap balanced with iounmap for drivers/mtd subsystem [MTD] Switch to pci_get_device and do ref counting [MTD] blkdev helper code: fix printk format warning [MTD] Fix ixp4xx partition parsing. [JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h [MTD NAND] Remove old code in au1550nd.c [MTD] Unlock NOR flash automatically where necessary
2006-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (114 commits) [POWERPC] Fix ohare IDE irq workaround on old powermacs [POWERPC] EEH: Power4 systems sometimes need multiple resets. [POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t. [POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.c [POWERPC] Maple U3 HT - reject inappropriate config space access [POWERPC] Fix IPIC pending register assignments [POWERPC] powerpc: fix building gdb against asm/ptrace.h [POWERPC] Remove DISCONTIGMEM cruft from page.h [POWERPC] Merge iSeries i/o operations with the rest [POWERPC] 40x: Fix debug status register defines [POWERPC] Fix compile error in sbc8560 [POWERPC] EEH: support MMIO enable recovery step [POWERPC] EEH: enable MMIO/DMA on frozen slot [POWERPC] EEH: code comment cleanup [POWERPC] EEH: balance pcidev_get/put calls [POWERPC] PPC: Fix xmon stack frame address in backtrace [POWERPC] Add AT_PLATFORM value for Xilinx Virtex-4 FX [POWERPC] Start arch/powerpc/boot code reorganization [POWERPC] Define of_read_ulong helper [POWERPC] iseries: eliminate a couple of warnings ...
2006-09-22Remove accidentally-added include/linux/utsrelease.hDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22Revert "[MTD] blkdev helper code: fix printk format warning"David Woodhouse
This reverts commit 668040fcd1e06fc3e68a92708cbdfa5a52c37d3c. The 'flags' field of the struct request is 'unsigned long'. Quite how Randy came to see 'long int format, different type arg' I don't know, but it doesn't seem to be the case any more. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Add SSFDC (SmartMedia) read-only translation layerClaudio Lanconelli
Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] pmc551 pci cleanupJiri Slaby
Use pci_resource_start for getting start of regions and pci_iomap to not doing this directly by using dev->resource... (Thanks to Rolf Eike Beer) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] pmc551 use kzallocJiri Slaby
Use kzalloc instad of kmalloc+memset(0). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] pmc551 whitespace cleanupJiri Slaby
Spaces were used for indent, there was more than 80 columns per line. Get rid of that stuff. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Remove iq80310 map driverLennert Buytenhek
The iq80310 mtd map driver depends on ARCH_IQ80310, which isn't defined anywhere in the tree (as we don't have 80310 support), and furthermore, everything the driver does can be done with physmap instead. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD NAND] Fix in typo ndfc.c causing wrong ECC layoutFrank Haverkamp
Due to this typo, a wrong ECC layout table is chosen. Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] physmap: add power management supportLennert Buytenhek
Implement PM handling for physmap. Idea from Steven Scholz, patch by David Anders. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22ioremap balanced with iounmap for drivers/mtd subsystemAmol Lad
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Tested (compilation only) with: - allmodconfig - Modifying drivers/mtd/maps/Kconfig and drivers/mtd/nand/Kconfig to make sure that the changed file is compiling without warning Signed-off-by: Amol Lad <amol@verismonetworks.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Switch to pci_get_device and do ref countingAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] blkdev helper code: fix printk format warningRandy Dunlap
Fix printk format warning(s): drivers/mtd/mtd_blkdevs.c:72: warning: long int format, different type arg (arg 2) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Fix ixp4xx partition parsing.Brian Walsh
If the amount of flash is not divisible by 2 then the mask in parse_mtd_partitions would fail to work as designed. Passing in the base address corrects this problem. Signed-off-by: Brian Walsh <brian@walsh.ws> Cc: Deepak Sanexa <dsanexa@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[JFFS2] Remove unneeded ifdefs from jffs2_fs_i.hMichal Piotrowski
We certainly don't need the check for Linux version > 2.5.2, and in fact we can also live without the __ECOS check, since we can just add it back in the eCos git tree which is automatically derived from the Linux fs/jffs2 subdirectory in the upstream git tree. Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD NAND] Remove old code in au1550nd.cMichal Piotrowski
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Unlock NOR flash automatically where necessaryHåvard Skinnemoen
Introduce the MTD_STUPID_LOCK flag which indicates that the flash chip is always locked after power-up, so all sectors need to be unlocked before it is usable. If this flag is set, and the chip provides an unlock() operation, mtd_add_device will unlock the whole MTD device if it's writeable. This means that non-writeable partitions will stay locked. Set MTD_STUPID_LOCK in fixup_use_atmel_lock() so that these chips will work as expected. Signed-off-by: Håvard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[POWERPC] Fix ohare IDE irq workaround on old powermacsBenjamin Herrenschmidt
Looks like a workaround for old bogus OF bitrot... This fixes it and hence fixes boot on some performa machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-22[POWERPC] EEH: Power4 systems sometimes need multiple resets.Linas Vepstas
On detection of an EEH error, some Power4 systems seem to occasionally want to be reset twice before they report themselves as fully recovered. This patch re-arranges the code to attempt additional resets if the first one doesn't take. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-22[POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t.Scott Wood
This patch causes fsl_soc.h to import the definition of phys_addr_t itself, rather than relying on its includer to do so. Signed-off-by: Scott Wood <scott@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-22[POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.cNathan Lynch
Noticed that the U3_*CFA macros have some typos: #define U3_HT_CFA0(devfn, off) \ ((((unsigned long)devfn) << 8) | offset) (refers to offset rather than off) #define U3_AGP_CFA0(devfn, off) \ ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ (refers to dev_fn rather than devfn) Things happen to work, but there doesn't seem to be any reason these shouldn't be functions. Overall behavior should be unchanged. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-22[POWERPC] Maple U3 HT - reject inappropriate config space accessNathan Lynch
When there is a PCI-X mode 2 capable device behind the HT<->PCI-X bridge, the pci core decides that the device has the extended 4K config space, even though the bus is not operating in mode 2. This is because the u3_ht pci ops silently accept offsets greater than 255 but use only the 8 least significant bits, which means reading at offset 0x100 gets the data at offset 0x0, and causes confusion for lspci. Reject accesses to configuration space offsets greater than 255. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-22[POWERPC] Fix IPIC pending register assignmentsScott Wood
This patch fixes the assignment of pending registers to IRQ numbers for the IPIC; the code previously assigned all IRQs to the high pending word regardless of which word the interrupt belonged to. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-22[POWERPC] powerpc: fix building gdb against asm/ptrace.hArnd Bergmann
Ulrich Weigand found a bug with the current version of the asm-powerpc/ptrace.h that prevents building at least the SPU target version of gdb, since some ptrace opcodes are not defined. The problem seems to have originated in the merging of 32 and 64 bit versions of that file, the problem is that some opcodes are only valid on 64 bit kernels, but are also used by 32 bit programs, so they can't depends on the __powerpc64__ symbol. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 22:13:43 +0000