aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-15bnx2x: Report the maximal available BW as link speedEilon Greenstein
The device is limited to the maximal BW allocation, so it should be displayed as the link speed to notify the user. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15bnx2x: Do not call load/unload functionality from DCCEilon Greenstein
There is really no need to clear the MAC or the FW filtering rules - it was added for completion, but caused race conditions with load/unload. Removing this redundant code Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15bnx2x: Adding FW mailbox mutexEilon Greenstein
DCC commands are not protected with the RTNL lock, so a mutex should be added Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15bnx2x: Changing the Disabled state to a flagEilon Greenstein
When working with DCC, a function can be disabled or enabled (virtual link down or up). Using the function state introduced some race conditions with the load/unload flow. Using a separate flag to indicate that the function is disabled. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15bnx2x: Remove old FW filesEilon Greenstein
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15bnx2x: Allowing 0 as initial fairness valueEilon Greenstein
Value of zero was used to disable the fairness mechanism. Though the code (driver and FW) allowed changing the value at run time, it did not allow to do that if the mechanism was disabled to begin with. Fixed the FW to allow turning on and off the mechanism at run time. Fixed the code to read the value from the chip at the right sequence. Without this fix, if the initial value was set to zero, traffic could not run on the interface. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15bnx2x: Add FW 5.2.7Eilon Greenstein
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14sparc: Add missing __NR_recvmmsg define.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14net: sk_drops consolidationEric Dumazet
sock_queue_rcv_skb() can update sk_drops itself, removing need for callers to take care of it. This is more consistent since sock_queue_rcv_skb() also reads sk_drops when queueing a skb. This adds sk_drops managment to many protocols that not cared yet. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14hamradio: Fix bit test correctly.Thomas Sailer
Signed-off-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14Phonet: forward incoming packetsRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14Phonet: route outgoing packetsRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14Phonet: routing table Netlink interfaceRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14Phonet: routing table backendRémi Denis-Courmont
The Phonet "universe" only has 64 addresses, so we keep a trivial flat routing table. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14Phonet: deliver broadcast packets to broadcast socketsRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14ia64: Fix up the syscall table for recvmmsgArnaldo Carvalho de Melo
Reported-by: "Tony Luck" <tony.luck@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14net: Remove BKL from tunThomas Gleixner
The lock_kernel/unlock_kernel() in cycle_kernel_lock() which is called in tun_chr_open() is not serializing against anything and safe to remove. tun_chr_fasync() is serialized by get/put_tun() and fasync_helper() has no dependency on BKL. The modification of tun->flags is racy with and without the BKL so removing it does not make it worse. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-13TI DaVinci EMAC: Clear statistics register properly.Sriram
The mechanism to clear the statistics register is dependent on the status of GMIIEN bit in MAC control register. If the GMIIEN bit is set, the stats registers are write to decrement. If the GMIIEN bit is cleared, the stats registers are plain read/write registers. The stats register clearing operation must take into account the current state of GMIIEN as it can be cleared when the interface is brought down. With existing implementation logic, querying for interface stats when the interface is down, can corrupt the statistics counters. This patch examines the GMIIEN bit status in MAC_CONTROL register before choosing an appropriate mask for clearing stats registers. Signed-off-by: Sriramakrishnan <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13r8169: partial support and phy init for the 8168dfrançois romieu
Extracted from Realtek's 8.012.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: smsc911x: allow platform_data to specify mac addressManuel Lauss
Extend the driver to accept a MAC address specified in platform_data. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: enable smsc911x on MIPSManuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13ixgb: Fix erroneous display of stats by ethtool -SAjit Khaparde
Commit 5675f221 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13igb: Fix erroneous display of stats by ethtool -SAjit Khaparde
Commit 337e067d overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13e1000: Fix erroneous display of stats by ethtool -SAjit Khaparde
Commit 23d26497 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13e1000e: Fix erroneous display of stats by ethtool -SAjit Khaparde
Commit fd8235bb overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13ixgbe: Fix erroneous display of stats by ethtool -SAjit Khaparde
Commit 59aa3cc4 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: add sysfs entries for diag toolsDhananjay Phadke
Add sysfs entries to enable register and memory access for diagnostic tools. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: separate register and memory access lockDhananjay Phadke
Since register and onboard memory access has separate window registers, they need not be kept under same lock. Also, memory is always accessed from process context (mostly for firmware init and diagnostic tools). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: annotate register windowing codeDhananjay Phadke
Use common variables crb_win, ocm_win for all revisions of chip. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: add access to on chip memory for toolsDhananjay Phadke
Add access to on chip memory, this is used by debug and diagnostic tools only. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13netxen: remove sub 64-bit mem accessesAmit Kumar Salecha
Sub 64-bit / unaligned access to oncard memory was only used by old diagnostic tools, causes some intermittent issues when memory controller agent is used. The new access method was added by commit ea6828b8aa3a8ebae8d7740f32f212ba1d2f0742 ("netxen: improve pci memory access"). Firmware init anyway uses 8-byte strides. This also fixes address/offset calculation for NX2031 context memory (SIU). For NX3031, SIU uses same register offsets as packet memory (MIU). Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: Use netdev_alloc_skb_ip_align()Eric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-13sb1250-mac: duplicate setting of bit V_MAC_RX_PL_THRSH(4) in ↵roel kluin
sbmac_channel_start() The bit V_MAC_RX_PL_THRSH(4) was already set a few lines higher. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net/hamradio: fix test in receive()roel kluin
The negation makes it a bool before the comparison and hence it will never evaluate to true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13x25: bit and/or confusion in x25_ioctl()?roel kluin
Looking at commit ebc3f64b864f it appears that this was intended and not the original, equivalent to `if (facilities.reverse & ~0x81)'. In x25_parse_facilities() that patch changed how facilities->reverse was set. No other bits were set than 0x80 and/or 0x01. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13cxgb3: Added private MAC address and provisioning packet handler for iSCSIKaren Xie
This patch added support of private MAC address per port and provisioning packet handler for iSCSI traffic only. The above changes are isolated to the cxgb3 driver, independent of any scsi or iscsi driver changes. Acked-by: Karen Xie <kxie@chelsio.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Rakesh Ranjan <rakesh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: add Runtime PM to the sh_eth driverMagnus Damm
Add Runtime PM support to the sh_eth driver. The clock to the ethernet hardware block will be enabled as long as the network device is up. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: allow sh_eth to get mac address through platform dataMagnus Damm
Extend the sh_eth driver to allow passing the mac address using the platform data structure. This to simplify board setup code. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13can: make the number of echo skb's configurableWolfgang Grandegger
This patch allows the CAN controller driver to define the number of echo skb's used for the local loopback (echo), as suggested by Kurt Van Dijck, with the function: struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); The CAN drivers have been adapted accordingly. For the ems_usb driver, as suggested by Sebastian Haas, the number of echo skb's has been increased to 10, which improves the transmission performance a lot. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13net: Add netdev_alloc_skb_ip_align() helperEric Dumazet
Instead of hardcoding NET_IP_ALIGN stuff in various network drivers, we can add a helper around netdev_alloc_skb() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13tcp: replace ehash_size by ehash_maskEric Dumazet
Storing the mask (size - 1) instead of the size allows fast path to be a bit faster. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13ipv6: fix devconf after adding force_tllao optionCosmin Ratiu
Signed-off-by: Cosmin Ratiu <cratiu@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13irda/sa1100_ir: check return value of startup hookDmitry Artamonow
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13udp: Fix udp_poll() and ioctl()Eric Dumazet
udp_poll() can in some circumstances drop frames with incorrect checksums. Problem is we now have to lock the socket while dropping frames, or risk sk_forward corruption. This bug is present since commit 95766fff6b9a78d1 ([UDP]: Add memory accounting.) While we are at it, we can correct ioctl(SIOCINQ) to also drop bad frames. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13WAN: fix Cisco HDLC handshaking.Krzysztof Halasa
Cisco HDLC uses keepalive packets and sequence numbers to determine link state. In rare cases both ends could transmit keepalive packets at the same time, causing the received sequence numbers to be treated as incorrect. Now we accept our current sequence number as well as the previous one. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13tcp: fix tcp_defer_accept to consider the timeoutWilly Tarreau
I was trying to use TCP_DEFER_ACCEPT and noticed that if the client does not talk, the connection is never accepted and remains in SYN_RECV state until the retransmits expire, where it finally is deleted. This is bad when some firewall such as netfilter sits between the client and the server because the firewall sees the connection in ESTABLISHED state while the server will finally silently drop it without sending an RST. This behaviour contradicts the man page which says it should wait only for some time : TCP_DEFER_ACCEPT (since Linux 2.4) Allows a listener to be awakened only when data arrives on the socket. Takes an integer value (seconds), this can bound the maximum number of attempts TCP will make to complete the connection. This option should not be used in code intended to be portable. Also, looking at ipv4/tcp.c, a retransmit counter is correctly computed : case TCP_DEFER_ACCEPT: icsk->icsk_accept_queue.rskq_defer_accept = 0; if (val > 0) { /* Translate value in seconds to number of * retransmits */ while (icsk->icsk_accept_queue.rskq_defer_accept < 32 && val > ((TCP_TIMEOUT_INIT / HZ) << icsk->icsk_accept_queue.rskq_defer_accept)) icsk->icsk_accept_queue.rskq_defer_accept++; icsk->icsk_accept_queue.rskq_defer_accept++; } break; ==> rskq_defer_accept is used as a counter of retransmits. But in tcp_minisocks.c, this counter is only checked. And in fact, I have found no location which updates it. So I think that what was intended was to decrease it in tcp_minisocks whenever it is checked, which the trivial patch below does. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13bonding: change bond_create_proc_entry() to return voidNicolas de Pesloüan
The function bond_create_proc_entry is currently of type int. Two versions of this function exist: The one in the ifdef CONFIG_PROC_FS branch always return 0. The one in the else branch (which is empty) return nothing. When CONFIG_PROC_FS is undef, this cause the following warning: drivers/net/bonding/bond_main.c: In function `bond_create_proc_entry': drivers/net/bonding/bond_main.c:3393: warning: control reaches end of non-void function No caller of this function use the returned value. So change the returned type from int to void and remove the useless return 0; . Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Reported-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-133c574_cs: spin_lock the set_multicast_list functionKen Kawasaki
3c574_cs: spin_lock the set_multicast_list function. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:59:03 +0000