aboutsummaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2008-11-19fix-jack-interrupt-debounce-loss-window.patchAndy Green
2008-11-19[neo] Every access to GPIO bank B has to go through the shadow codeHolger Freyther
2008-11-19[neo bluetooth] GTA01_GPIO_MODEM_RST != GTA02_GPIO_MODEM_RSTHolger Freyther
2008-11-19[led] Misc fixes in the driver codeHolger Freyther
2008-11-19[leds] We would enable PWM for all four timers, disable it for all four as wellHolger Freyther
2008-11-19Remove not needed #ifdef as machine_is_ is always defined.Holger Freyther
2008-11-19OpenMoko => OpenmokoHolger Freyther
2008-11-19fix-jack-debounce.patchAndy Green
2008-11-19debug-glamo-add-lcd-regs-to-dump.patchwarmcat
2008-11-19fix-glamofb-cmd-mode-locking.patchAndy Green
2008-11-19fix-glamofb-cmdqueue-timeout.patchAndy Green
2008-11-19fix-gsm-download-irq-balance-issue.patchAndy Green
2008-11-19defconfig-audio.patchwarmcat
2008-11-19fix-wlan-disable.patchSameo
2008-11-19Enable GPS only if it was powered on before suspending the deviceHolger Freyther
2008-11-19Fix the firing of "Jack"-Interrupts after resume when the modem is powered on.Holger Freyther
2008-11-19Fix spelling. flaoting => floatingHolger Freyther
2008-11-19This is gta02 and not gta01. Do not call the vibrator led.Holger Freyther
2008-11-19Add GPIO -> IRQ for the s3c2410 and add irq_to_gpio to the gpio.h of the Sams...Holger Freyther
2008-11-19Convert the driver to the generic GPIO frameworkHolger Freyther
2008-11-19Fix the FIXME, store the GPIO value for nowHolger Freyther
2008-11-19Remove dead codeHolger Freyther
2008-11-19Simplify the code, there is no need for a branch. The code forHolger Freyther
2008-11-19add-pcb-rev-sysfs.patchAndy Green
2008-11-19debug-glamo-dump-regs.patchwarmcat
2008-11-19add-gta02-pcb-revision-detect.patchAndy Green
2008-11-19Do not send low level debugging to the modemHolger Freyther
2008-11-19fix-suspend-gps-tx-level.patchwarmcat
2008-11-19fix-lis302dl-suspend-gpio.patchAndy Green
2008-11-19add-pcf50633-06-RTC_AIE-ioctlHolger Hans Peter Freyther
2008-11-19fix-charging-deassert-host-power-1a-detect.patchAndy Green
2008-11-19introduce-usb-host-power-control.patchAndy Green
2008-11-19fix-gpio-led-patch-still-pwm-t3.patchwarmcat
2008-11-19use gpio control ledsWillie
2008-11-19fix-glamo-mci-fake-reset-opcode-in-suspend.patchwarmcat
2008-11-19fix-lcm-reinit-post-resume.patchwarmcat
2008-11-19fix-glamo-mci-defeat-ops-during-suspend.patchAndy Green
2008-11-19config-add-alsa.patchwarmcat
2008-11-19fix-s3c2410_timer_setup-resume-BUG.patchwarmcat
2008-11-19debug-suspend-dump-gpio-states-add-GPA.patchAndy Green
2008-11-19introduce-bq27000-battery-driver.patchAndy Green
2008-11-19introduce-fiq-hdq.patchAndy Green
2008-11-19clean-snip-gpio-reinit.patchwarmcat
2008-11-19bugfix-deglitch-gpio-output-enable.patchwarmcat
2008-11-19contrib-fix-chgstate-array-bloat.patchMike Montour
2008-11-19local-config-ext2.patchwarmcat
2008-11-19local-config-pmu.patchwarmcat
2008-11-19local-config-defconfig-motion-sensor-gpio.patchwarmcat
2008-11-19local-config-wlan-config-changes.patchwarmcat
2008-11-19local-config-add-bluetooth-monolithic.patchwarmcat