aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-05-08fbdev: fbcon: check if mode can handle new screenAntonino A. Daplas
Check if the mode can properly display the screen. This will be needed by drivers where the capability is not constant with each mode. The function fb_set_var() will query fbcon the requirement, then it will query the driver (via a new hook fb_get_caps()) its capability. If the driver's capability cannot handle fbcon's requirement, then fb_set_var() will fail. For example, if a particular driver supports 2 modes where: mode1 = can only display 8x16 bitmaps mode2 = can display any bitmap then if current mode = mode2 and current font = 12x22 fbset <mode1> /* mode1 cannot handle 12x22 */ fbset will fail Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb: prevent triggering of softlockupDave Jones
If the chip locks up, we get into a long polling loop, where the softlockup detector kicks in. See https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=151878 for an example. [adaplas] Chip lockup can occur at 3 points (flush, sync, and wait). Consolidate and allow the driver to go to safe mode cleanly. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: pixclock setting restrictionKrzysztof Helt
This patch adds restrictions to calculations of m, n and p factors which sets the pixclock for the Permedia 2V. I found during tests that synchronization is unstable if m (divisor) is bigger than half of the n (numerator). The patch disallows such settings combination. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: Permedia 2V memory clock settingKrzysztof Helt
Permedia 2V uses its own registers to set a memory clock. The patch adds these registers and uses them in the set_memclock() function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: 3dlabs Permedia 2V reference board addedKrzysztof Helt
This patch adds support for 3dlabs Permedia reference board. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb/rivafb: switch to pci_get refcountingAlan Cox
Switch to pci_get refcounting APIs [adaplas] Fix a long-standing bug where the return value of pci_find_slot()/pci_get_bus_and_slot() is ignored. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vmlfb: framebuffer driver for Intel Vermilion RangeAlan Hourihane
Add the Intel Vermilion Range framebuffer support. Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: driver fixesOndrej Zajicek
This fixes broken fbcon on Virge VX in 24 bpp mode, and contains several other small updates. Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: save the activate field before calling fb_check_var()Antonino A. Daplas
Some drivers may reset the var->activate field on fb_check_var(). This can lead to undefined behavior. For example, doing fbset -a <option> with vga16fb will only modify the active console instead of modifying all. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbcon: check if the character count can be handledAntonino A. Daplas
Fontmaps can be 256 or 512 in length. The only driver that can do tileblitting can only handle 256 characters. Check for this when setting the font. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: implement fb_get_tilemax()Antonino A. Daplas
Implement fb_get_tilemax(). It just returns 256. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add tile operation to get the maximum length of the mapAntonino A. Daplas
Add a tile method, fb_get_tilemax(), that returns the maximum length of the tile map (or font map). This is needed by s3fb which can only handle 256 characters. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: limit 8x16 rectangles when tileblitting is enabledAntonino A. Daplas
If tileblitting is enabled (text mode), the hardware can only accept 8x16 bitmaps. Advertise this to the upper layer. And to ensure that an appropriate font is always available, select an 8x16 font in Kconfig. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vga16fb: restrict to blit rectangles with widths of multiples of 8 pixelsAntonino A. Daplas
Advertise that vga16fb can only handle widths that are 8-pixel-multiple only (software limitation). To ensure that a legal font is available, SELECT an 8x16 font in Kconfig. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbcon: font setting should check limitation of driverAntonino A. Daplas
fbcon_set_font() will now check if the new font dimensions can be drawn by the driver (by checking pixmap.blit_x and blit_y). Similarly, add 2 new parameters to get_default_font(), font_w and font_h, to further aid in the font selection process. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: advertise limitation of drawing engineAntonino A. Daplas
A few drivers are not capable of blitting rectangles of any dimension. vga16fb can only blit 8-pixel wide rectangles, while s3fb (in tileblitting mode) can only blit 8x16 rectangles. For example, loading a 12x22 font in vga16fb will result in a corrupt display. Advertise this limitation/capability in info->pixmap.blit_x and blit_y. These fields are 32-bit arrays (font max is 32x32 only), ie, if bit 7 is set, then width/height of 7+1 is supported. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: consolidate common drawing functions into a header fileAntonino A. Daplas
Consolidate common drawing functions into a single header file. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vfb: use fb_sys_read() and fb_sys_write()Antonino A. Daplas
Since vfb's framebuffer is vmalloc'ed, use the fb_sys_read() and fb_sys_write(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08hecubafb: use fb_sys_read()Antonino A. Daplas
Since hecubafb's framebuffer is vmalloc'ed, use fb_sys_read(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08arcfb: use fb_sys_read()Antonino A. Daplas
Since arcfb's framebuffer is vmalloc'ed, use the fb_sys_read(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add fb_read/fb_write functions for framebuffers in system RAMAntonino A. Daplas
The functions fb_read() and fb_write in fbmem.c assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using __raw_read/__raw_write (fb_readl/fb_writel) for these drivers is illegal, especially in other platforms. Create file read and write methods for these types of drivers. These are named fb_sys_read() and fb_sys_write(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: pass struct fb_info to fb_read and fb_writeAntonino A. Daplas
It is unnecessary to pass struct file to fb_read() and fb_write() in struct fb_ops. For consistency with the other methods, pass struct fb_info instead. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vfb: use sys instead of cfb drawing functionsAntonino A. Daplas
Since vfb's framebuffer is vmalloc'ed, use the sys_* drawing functions instead of cfb_*. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08hecubafb: use sys instead of cfb drawing functionsAntonino A. Daplas
Since hecubafb's framebuffer is vmalloc'ed, use the sys_* drawing functions instead of cfb_*. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08arcfb: use sys instead of cfb drawing functionsAntonino A. Daplas
Since arcfb's framebuffer is vmalloc'ed, use the sys_* drawing functions instead of cfb_*. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add drawing functions for framebuffers in system RAMAntonino A. Daplas
The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using _raw_read/write and family for these drivers (as used in the cfb* functions) is illegal, especially in other platforms. Create 3 new drawing functions, based almost entirely from the original except that the framebuffer memory is assumed to be in system RAM. These are named as sysimgblt, syscopyarea, and sysfillrect. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08skeletonfb: documentation error fixesAntonino A. Daplas
Documentation error fixes. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vt: add documentation for new boot/sysfs optionsAntonino A. Daplas
Add description to Documentation/kernel-parameters.txt on new options default_blue, default_grn, default_red, and default_utf8. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08i810fb: fix incorrect frequency maskAntonino A. Daplas
Fix a long-standing bug. The mask used to detect a 100Mhz or 133Mhz chipset is incorrect. (The only side effect of this bug is that it will choose an incorrect watermark). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08hecubafb: kill sparse warningsAntonino A. Daplas
The framebuffer memory is allocated from system RAM (vmalloc'ed). Add __force annotations. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: add sparse annotationsAntonino A. Daplas
Add sparse annotations and use fb_read/fb_write and family to access the framebuffer. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08arcfb: kill sparse warningAntonino A. Daplas
The framebuffer memory is allocated from system RAM (vmalloc'ed). Add __force annotations. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add sparse annotations in svgalib.cAntonino A. Daplas
Add sparse annotations and use fb_read/fb_write family to access the framebuffer. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: kill sparse warning in deferred IOAntonino A. Daplas
Kill the following in fb_defio.c: drivers/video/fb_defio.c:40:43: warning: incorrect type in argument 1 (different address spaces) drivers/video/fb_defio.c:40:43: expected void *addr drivers/video/fb_defio.c:40:43: got char [noderef] *screen_base<asn:2> The framebuffer memory of these types of devices are allocated from system RAM. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rivafb: fix IO accessAntonino A. Daplas
Fix IO access, with the following sparse warnings: drivers/video/riva/fbdev.c:320:25: warning: dereference of noderef expression drivers/video/riva/fbdev.c:321:29: warning: dereference of noderef expression drivers/video/riva/fbdev.c:327:18: warning: dereference of noderef expression drivers/video/riva/fbdev.c:328:15: warning: dereference of noderef expression Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb: fix sparse warningAntonino A. Daplas
Fix the following sparse warning: drivers/video/nvidia/nv_setup.c:659:20: warning: dereference of noderef expression Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbcon: delay screen update when setting the mode of all consolesAntonino A. Daplas
If the current framebuffer console is rotated (rotate != 0), doing an "fbset -a" will corrupt the current console. Fix by updating the current console only after all non-visible consoles have been updated. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: link vgastate.o using KconfigAntonino A. Daplas
Instead of directly linking vgastate.o by individual drivers, create a Kconfig option VGASTATE which can be 'SELECT'ed by individual drivers instead. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08savagefb: VGA state save and restoreAntonino A. Daplas
Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the VGA registers are linearly mapped to the MMIO space, MMIO access is used which is not limited to X86 platforms nor to the primary display device. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08savagefb: rework i2c bit accessAntonino A. Daplas
Use already defined VGAwCR/VGArCR functions to access the i2c bus. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb: VGA state save and restoreAntonino A. Daplas
Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the non-linear mapping of the VGA registers to the MMIO space, this will be done only on X86 platforms where the device is the primary display. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08epson1355fb.c: fix error handling codeRoland Stigge
Fix error handling code Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08cirrusfb: convert to generic booleanRichard Knutsson
Convert to generic boolean. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08VIDEO: add spaces on either side of the case "..." operatorRobert P. J. Day
Following the programming advice laid down in the gcc manual, make sure the case "..." operator has spaces on either side. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08skeletonfb: various correctionsKrzysztof Helt
This is mainly correction of types, typos and missing characters in the skeletonfb.c file found while trying to prepare a new fb driver. [adaplas] Additions on power management and fixes as per akpm Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb: access CRT registers safelyAntonino A. Daplas
Use Read/WriteCrtc() to access CRTC registers in nv_i2c.c. These are safer because it uses the correct CRTC base (0x3bx or 0x3dx). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nvidiafb: ensure that CRTC registers are accessibleAntonino A. Daplas
- Ensure that CRTC registers are accessible by unlocking them on set_par(), otherwise i2c reading will fail. - The function nvidia_vga_protect(), does not protect the VGA registers, but turns off the screen. Rename it to nvidia_screen_off(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rivafb: fixed reversed DDC portsAntonino A. Daplas
Fixed reversed DDC port so assignments are congruent with nvidiafb's and X's nv driver. Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rivafb/nvidiafb: Various cleanupsJean Delvare
Various cleanups to rivafb/nvidiafb's I2C code: * Drop useless par->bus. * Refactor I2C bus deletion code. * Drop useless variable initialization. * Remove unneeded include of <linux/i2c-id.h>. * Simplify +1/-1. * Add __devinit tags where possible. [adaplas] The varible initialization are not useless. However, rivafb must check if i2c bus are created properly before reading the EDID block. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rivafb: handle I2C bus creation failureJean Delvare
I2C bus creation may fail, let rivafb handle that case properly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 09:42:31 +0000