aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-07[PATCH] fs/sysv/: doc cleanupAdrian Bunk
Remove two different changelog files from fs/sysv/ and merges the INTRO file into Documentation/filesystems/sysv-fs.txt Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] gcc-4.1.0 is bustAndrew Morton
Keith says Compiling 2.6.19-rc6 with gcc version 4.1.0 (SUSE Linux), wait_hpet_tick is optimized away to a never ending loop and the kernel hangs on boot in timer setup. 0000001a <wait_hpet_tick>: 1a: 55 push %ebp 1b: 89 e5 mov %esp,%ebp 1d: eb fe jmp 1d <wait_hpet_tick+0x3> This is not a problem with gcc 3.3.5. Adding barrier() calls to wait_hpet_tick does not help, making the variables volatile does. And the consensus is that gcc-4.1.0 is busted. Suse went and shipped gcc-4.1.0 so we cannot ban it. Add a warning. Cc: Keith Owens <kaos@ocs.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] amba-pl010: clear error flags on rx errorLennert Buytenhek
The pl010 primecell documentation specifies that an error indicated via RSR should be cleared by a write to ECR. We didn't do this, which was causing errors to be re-reported on every call to pl010_rx_chars(). Doing a write to ECR once we detect an error appears to prevent the ep93xx console UART driver from going into a mode where it reports "ttyAM0: X input overrun(s)" every couple of keystrokes. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] winbond IDE depends on IDEDMAOlaf Hering
winbond ide depends on idedma. Move the option into the IDEDMA section. drivers/built-in.o: In function `.sl82c105_ide_dma_timeout': sl82c105.c:(.text+0x624d0): undefined reference to `.__ide_dma_timeout' drivers/built-in.o: In function `.sl82c105_ide_dma_off_quietly': sl82c105.c:(.text+0x6274c): undefined reference to `.__ide_dma_off_quietly' drivers/built-in.o: In function `.sl82c105_ide_dma_on': sl82c105.c:(.text+0x6284c): undefined reference to `.__ide_dma_on' drivers/built-in.o: In function `.sl82c105_check_drive': sl82c105.c:(.text+0x628ec): undefined reference to `.__ide_dma_bad_drive' sl82c105.c:(.text+0x62934): undefined reference to `.__ide_dma_good_drive' drivers/built-in.o: In function `.sl82c105_ide_dma_start': sl82c105.c:(.text+0x62c24): undefined reference to `.ide_dma_start' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Save some bytes in struct inodeArnaldo Carvalho de Melo
[acme@newtoy net-2.6.20]$ pahole --cacheline 64 fs/inode.o inode /* /pub/scm/linux/kernel/git/acme/net-2.6.20/include/linux/dcache.h:86 */ struct inode { struct hlist_node i_hash; /* 0 8 */ struct list_head i_list; /* 8 8 */ struct list_head i_sb_list; /* 16 8 */ struct list_head i_dentry; /* 24 8 */ long unsigned int i_ino; /* 32 4 */ atomic_t i_count; /* 36 4 */ umode_t i_mode; /* 40 2 */ /* XXX 2 bytes hole, try to pack */ unsigned int i_nlink; /* 44 4 */ uid_t i_uid; /* 48 4 */ gid_t i_gid; /* 52 4 */ dev_t i_rdev; /* 56 4 */ loff_t i_size; /* 60 8 */ struct timespec i_atime; /* 68 8 */ struct timespec i_mtime; /* 76 8 */ struct timespec i_ctime; /* 84 8 */ unsigned int i_blkbits; /* 92 4 */ long unsigned int i_version; /* 96 4 */ blkcnt_t i_blocks; /* 100 4 */ short unsigned int i_bytes; /* 104 2 */ /* XXX 2 bytes hole, try to pack */ spinlock_t i_lock; /* 108 40 */ struct mutex i_mutex; /* 148 76 */ struct rw_semaphore i_alloc_sem; /* 224 64 */ struct inode_operations * i_op; /* 288 4 */ const struct file_operations * i_fop; /* 292 4 */ struct super_block * i_sb; /* 296 4 */ struct file_lock * i_flock; /* 300 4 */ struct address_space * i_mapping; /* 304 4 */ struct address_space i_data; /* 308 188 */ struct list_head i_devices; /* 496 8 */ union ; /* 504 4 */ int i_cindex; /* 508 4 */ __u32 i_generation; /* 512 4 */ /* ---------- cacheline 8 boundary ---------- */ long unsigned int i_dnotify_mask; /* 516 4 */ struct dnotify_struct * i_dnotify; /* 520 4 */ struct list_head inotify_watches; /* 524 8 */ struct mutex inotify_mutex; /* 532 76 */ long unsigned int i_state; /* 608 4 */ long unsigned int dirtied_when; /* 612 4 */ unsigned int i_flags; /* 616 4 */ atomic_t i_writecount; /* 620 4 */ void * i_security; /* 624 4 */ void * i_private; /* 628 4 */ }; /* size: 632, sum members: 628, holes: 2, sum holes: 4 */ [acme@newtoy net-2.6.20]$ So just moving i_mode to after i_bytes we save 4 bytes by nuking both holes: [acme@newtoy net-2.6.20]$ codiff -V /tmp/inode.o.before fs/inode.o /pub/scm/linux/kernel/git/acme/net-2.6.20/fs/inode.c: struct inode | -4 i_mode; from: umode_t /* 40(0) 2(0) */ to: umode_t /* 102(0) 2(0) */ 1 struct changed [acme@newtoy net-2.6.20]$ I've prunned all the other offset changes, only this one is of interest here. So now we have: [acme@newtoy net-2.6.20]$ pahole --cacheline 64 ../OUTPUT/qemu/net-2.6.20/fs/inode.o inode /* /pub/scm/linux/kernel/git/acme/net-2.6.20/include/linux/dcache.h:86 */ struct inode { struct hlist_node i_hash; /* 0 8 */ struct list_head i_list; /* 8 8 */ struct list_head i_sb_list; /* 16 8 */ struct list_head i_dentry; /* 24 8 */ long unsigned int i_ino; /* 32 4 */ atomic_t i_count; /* 36 4 */ unsigned int i_nlink; /* 40 4 */ uid_t i_uid; /* 44 4 */ gid_t i_gid; /* 48 4 */ dev_t i_rdev; /* 52 4 */ loff_t i_size; /* 56 8 */ /* ---------- cacheline 1 boundary ---------- */ struct timespec i_atime; /* 64 8 */ struct timespec i_mtime; /* 72 8 */ struct timespec i_ctime; /* 80 8 */ unsigned int i_blkbits; /* 88 4 */ long unsigned int i_version; /* 92 4 */ blkcnt_t i_blocks; /* 96 4 */ short unsigned int i_bytes; /* 100 2 */ umode_t i_mode; /* 102 2 */ spinlock_t i_lock; /* 104 40 */ struct mutex i_mutex; /* 144 76 */ struct rw_semaphore i_alloc_sem; /* 220 64 */ struct inode_operations * i_op; /* 284 4 */ const struct file_operations * i_fop; /* 288 4 */ struct super_block * i_sb; /* 292 4 */ struct file_lock * i_flock; /* 296 4 */ struct address_space * i_mapping; /* 300 4 */ struct address_space i_data; /* 304 188 */ struct list_head i_devices; /* 492 8 */ union ; /* 500 4 */ int i_cindex; /* 504 4 */ __u32 i_generation; /* 508 4 */ /* ---------- cacheline 8 boundary ---------- */ long unsigned int i_dnotify_mask; /* 512 4 */ struct dnotify_struct * i_dnotify; /* 516 4 */ struct list_head inotify_watches; /* 520 8 */ struct mutex inotify_mutex; /* 528 76 */ long unsigned int i_state; /* 604 4 */ long unsigned int dirtied_when; /* 608 4 */ unsigned int i_flags; /* 612 4 */ atomic_t i_writecount; /* 616 4 */ void * i_security; /* 620 4 */ void * i_private; /* 624 4 */ }; /* size: 628 */ [acme@newtoy net-2.6.20]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] char: ip2 remove broken macroMariusz Kozlowski
This macro is broken and unused so why not remove it. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] rtc: ds1743 supportTorsten Ertbjerg Rasmussen
The real time clocks ds1742 and ds1743 differs only in the size of the nvram. This patch changes the existing ds1742 driver to support also ds1743. The main change is that the nvram size is determined from the resource attached to the device. The patch have benefitted from suggestions from Atsushi Nemeto, who is the author of the ds1742 driver. Signed-off-by: Torsten Rasmussen Rasmussen <tr@newtec.dk> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] softirq: remove BUG_ONs which can incorrectly triggerZachary Amsden
It is possible to have tasklets get scheduled before softirqd has had a chance to spawn on all CPUs. This is totally harmless; after success during action CPU_UP_PREPARE, action CPU_ONLINE will be called, which immediately wakes softirqd on the appropriate CPU to process the already pending tasklets. So there is no danger of having a missed wakeup for any tasklets that were already pending. In particular, i386 is affected by this during startup, and is visible when using a very large initrd; during the time it takes for the initrd to be decompressed, a timer IRQ can come in and schedule RCU callbacks. It is also possible that resending of a hardware IRQ via a softirq triggers the same bug. Because of different timing conditions, this shows up in all emulators and virtual machines tested, including Xen, VMware, Virtual PC, and Qemu. It is also possible to trigger on native hardware with a large enough initrd, although I don't have a reliable case demonstrating that. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: <caglar@pardus.org.tr> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] autofs: fix error code path in autofs_fill_sb()Jiri Kosina
When kernel is compiled with old version of autofs (CONFIG_AUTOFS_FS), and new (observed at least with 5.x.x) automount deamon is started, kernel correctly reports incompatible version of kernel and userland daemon, but then screws things up instead of correct handling of the error: autofs: kernel does not match daemon version ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- automount/4199 is trying to release lock (&type->s_umount_key) at: [<c0163b9e>] get_sb_nodev+0x76/0xa4 but there are no more locks to release! other info that might help us debug this: no locks held by automount/4199. stack backtrace: [<c0103b15>] dump_trace+0x68/0x1b2 [<c0103c77>] show_trace_log_lvl+0x18/0x2c [<c01041db>] show_trace+0xf/0x11 [<c010424d>] dump_stack+0x12/0x14 [<c012e02c>] print_unlock_inbalance_bug+0xe7/0xf3 [<c012fd4f>] lock_release+0x8d/0x164 [<c012b452>] up_write+0x14/0x27 [<c0163b9e>] get_sb_nodev+0x76/0xa4 [<c0163689>] vfs_kern_mount+0x83/0xf6 [<c016373e>] do_kern_mount+0x2d/0x3e [<c017513f>] do_mount+0x607/0x67a [<c0175224>] sys_mount+0x72/0xa4 [<c0102b96>] sysenter_past_esp+0x5f/0x99 DWARF2 unwinder stuck at sysenter_past_esp+0x5f/0x99 Leftover inexact backtrace: ======================= and then deadlock comes. The problem: autofs_fill_super() returns EINVAL to get_sb_nodev(), but before that, it calls kill_anon_super() to destroy the superblock which won't be needed. This is however way too soon to call kill_anon_super(), because get_sb_nodev() has to perform its own cleanup of the superblock first (deactivate_super(), etc.). The correct time to call kill_anon_super() is in the autofs_kill_sb() callback, which is called by deactivate_super() at proper time, when the superblock is ready to be killed. I can see the same faulty codepath also in autofs4. This patch solves issues in both filesystems in a same way - it postpones the kill_anon_super() until the proper time is signalized by deactivate_super() calling the kill_sb() callback. [raven@themaw.net: update comment] Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Ian Kent <raven@themaw.net> Cc: <stable@kernel.org> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] MAINTAINERS: Update the i2c and hwmon subsystems infoJean Delvare
The i2c and hwmon trees have moved to a new location. The lm-sensors project moved to a new home as well. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] make 8250_pnp serial driver work after suspend to ramMike Galbraith
Add suspend/resume methods to drivers/serial/8250_pnp.c. Tested on a P4/HT 16550A box, ttyS0 login survives across suspend to ram. [akpm@osdl.org: cleanups] Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] ide_scsi: allow it to be used for non CD onlyAlan Cox
Some people want to use ide_cd for CD-ROM but still dynamically load ide-scsi for things like tape drives. If you compile in the CD driver this works out but if you want them modular you need an option to ensure that whoever loads first the right things happen. This replaces the original draft patch which leaked a scsi host reference [akpm@osdl.org: add MODULE_PARM_DESC] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] lockdep: show more details about self-test failuresIngo Molnar
Make the locking self-test failures (of 'FAILURE' type) easier to debug by printing more information. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] lockdep: more chainsIngo Molnar
Some have reported a chain-table overflow - double its size. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] better CONFIG_W1_SLAVE_DS2433_CRC handlingEvgeniy Polyakov
CONFIG_W1_SLAVE_DS2433_CRC can be used directly, there's no reason for the indirection of defining a different variable in the Makefile. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] ext4 balloc: fix _with_rsv freezeHugh Dickins
Port fix to the off-by-one in find_next_usable_block's memscan from ext2 to ext4; but it didn't cause a serious problem for ext4 because the additional ext4_test_allocatable check rescued it from the error. [akpm@osdl.org: build fix] Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] ext4 balloc: use io_error labelHugh Dickins
ext4_new_blocks has a nice io_error label for setting -EIO, so goto that in the one place that doesn't already use it. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] ext4 balloc: say rb_entry not list_entryHugh Dickins
The reservations tree is an rb_tree not a list, so it's less confusing to use rb_entry() than list_entry() - though they're both just container_of(). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] ext4 balloc: fix off-by-one against rsv_endHugh Dickins
rsv_end is the last block within the reservation, so alloc_new_reservation should accept start_block == rsv_end as success. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] ext4 balloc: fix off-by-one against grp_goalHugh Dickins
grp_goal 0 is a genuine goal (unlike -1), so ext4_try_to_allocate_with_rsv should treat it as such. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] ext4 balloc: reset windowsz when fullHugh Dickins
ext4_new_blocks should reset the reservation window size to 0 when squeezing the last blocks out of an almost full filesystem, so the retry doesn't skip any groups with less than half that free, reporting ENOSPC too soon. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] jbd2: wait for already submitted t_sync_datalist buffer to completeHisashi Hifumi
In the current jbd code, if a buffer on BJ_SyncData list is dirty and not locked, the buffer is refiled to BJ_Locked list, submitted to the IO and waited for IO completion. But the fsstress test showed the case that when a buffer was already submitted to the IO just before the buffer_dirty(bh) check, the buffer was not waited for IO completion. Following patch solves this problem. If it is assumed that a buffer is submitted to the IO before the buffer_dirty(bh) check and still being written to disk, this buffer is refiled to BJ_Locked list. Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Jan Kara <jack@ucw.cz> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] lib functions: always build hweight for loadable modulesRandy Dunlap
Always build hweight8/16/32/64() functions into the kernel so that loadable modules may use them. I didn't remove GENERIC_HWEIGHT since ALPHA_EV67, ia64, and some variants of UltraSparc(64) provide their own hweight functions. Fixes config/build problems with NTFS=m and JOYSTICK_ANALOG=m. Kernel: arch/x86_64/boot/bzImage is ready (#19) Building modules, stage 2. MODPOST 94 modules WARNING: "hweight32" [fs/ntfs/ntfs.ko] undefined! WARNING: "hweight16" [drivers/input/joystick/analog.ko] undefined! WARNING: "hweight8" [drivers/input/joystick/analog.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] remove useless carta_random32.hStephane Eranian
Remove the carta_random32.h header file. The carta_random32() function was was put in and removed in favor of random32(). In the removal process, the header file was forgotten. Signed-off-by: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] REPORTING-BUGS: request .config fileRandy Dunlap
Add kernel .config file to REPORTING-BUGS. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] rtc-rs5c372: change register reading methodRiku Voipio
According to the datasheet rs5c372 supports three different methods for reading register values. Change from method #1 to method #3, since method #3 is the only one that works on Thecus N2100 board with this RTC. Signed-off-by: Riku Voipio <riku.voipio@movial.fi> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] reiserfs: do not add save links for O_DIRECT writesVladimir V. Saveliev
We add a save link for O_DIRECT writes to protect the i_size against the crashes before we actually finish the I/O. If we hit an -ENOSPC in aops->prepare_write(), we would do a truncate() to release the blocks which might have got initialized. Now the truncate would add another save link for the same inode causing a reiserfs panic for having multiple save links for the same inode. Signed-off-by: Vladimir V. Saveliev <vs@namesys.com> Signed-off-by: Amit Arora <amitarora@in.ibm.com> Signed-off-by: Suzuki K P <suzuki@in.ibm.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] sched: correct output of show_state()Chris Caputo
At present show_state prints a header the does not match the output of show_task, as follows: - sibling task PC pid father child younger older init S 00000000 0 1 0 2 (NOTLB) - This patch corrects the output of show_state so that the header is aligned with the data, ala: - free sibling task PC stack pid father child younger older init S 00000000 0 1 0 2 (NOTLB) - Signed-off-by: Chris Caputo <ccaputo@alt.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] sysctl: string length calculated is wrong if it contains negative ↵BP, Praveen
numbers In the functions do_proc_dointvec() and do_proc_doulongvec_minmax(), there seems to be a bug in string length calculation if string contains negative integer. The console log given below explains the bug. Setting negative values may not be a right thing to do for "console log level" but then the test (given below) can be used to demonstrate the bug in the code. # echo "-1 -1 -1 -123456" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk -1 -1 -1 -1234 # # echo "-1 -1 -1 123456" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk -1 -1 -1 1234 # (akpm: the bug is that 123456 gets truncated) It works as expected if string contains all +ve integers # echo "1 2 3 4" > /proc/sys/kernel/printk # cat /proc/sys/kernel/printk 1 2 3 4 # The patch given below fixes the issue. Signed-off-by: Praveen BP <praveenbp@ti.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] synclink_gt: fix init error handlingAkinobu Mita
Initialization synclink_gt forgot to unregister pci driver on error path. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] spi: check platform_device_register_simple() errorAkinobu Mita
Check the return value of platform_device_register_simple(). Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] futex: init error checkAkinobu Mita
Check register_filesystem() and kern_mount() return values. Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] reiser: replace kmalloc+memset with kzallocYan Burman
Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] dz: Fixes to make it workMaciej W. Rozycki
This a set of fixes mostly to make the driver actually work: 1. Actually select the line for setting parameters and receiver disable/enable. 2. Select the line for receive and transmit interrupt handling correctly. 3. Report the transmitter empty state correctly. 4. Set the I/O type of ports correctly. 5. Perform polled transmission correctly. 6. Don't fix the console line at ttyS3. 7. Magic SysRq support. 8. Various small bits here and there. Tested with a DECstation 2100 (thanks Flo for making this possible). [akpm@osdl.org: fix typo] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Handle per-subsystem mutexes for CONFIG_HOTPLUG_CPU not setGautham R Shenoy
Provide a common interface for all the subsystems to lock and unlock their per-subsystem hotcpu mutexes. When CONFIG_HOTPLUG_CPU is not set, these operations would be no-ops. [akpm@osdl.org: macros -> inlines] Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Pass struct dev pointer to dma_cache_sync()Ralf Baechle
Pass struct dev pointer to dma_cache_sync() dma_cache_sync() is ill-designed in that it does not have a struct device pointer argument which makes proper support for systems that consist of a mix of coherent and non-coherent DMA devices hard. Change dma_cache_sync to take a struct device pointer as first argument and fix all its callers to pass it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Add struct dev pointer to dma_is_consistent()Ralf Baechle
dma_is_consistent() is ill-designed in that it does not have a struct device pointer argument which makes proper support for systems that consist of a mix of coherent and non-coherent DMA devices hard. Change dma_is_consistent to take a struct device pointer as first argument and fix the sole caller to pass it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] fs: reorder some 'struct inode' fields to speedup i_size manipulationsEric Dumazet
On 32bits SMP platforms, 64bits i_size is protected by a seqcount (i_size_seqcount). When i_size is read or written, i_size_seqcount is read/written as well, so it make sense to group these two fields together in the same cache line. This patch moves i_size_seqcount next to i_size, and also moves i_version to let offsetof(struct inode, i_size) being 0x40 instead of 0x3c (for 32bits platforms). For 64 bits platforms, i_size_seqcount doesnt exist, and the move of a 'long i_version' should not introduce a new hole because of padding. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] kernel-doc: stricter function pointer recognitionRandy Dunlap
Be more careful about function pointer args: look for "(...*" instead of just "(". This line in include/linux/input.h fools the current kernel-doc script into deciding that this is a function pointer: unsigned long ffbit[NBITS(FF_MAX)]; Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] kernel core: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] net: don't insert socket dentries into dentry_hashtableEric Dumazet
We currently insert socket dentries into the global dentry hashtable. This is suboptimal because there is currently no way these entries can be used for a lookup(). (/proc/xxx/fd/xxx uses a different mechanism). Inserting them in dentry hashtable slows dcache lookups. To let __dpath() still work correctly (ie not adding a " (deleted)") after dentry name, we do : - Right after d_alloc(), pretend they are hashed by clearing the DCACHE_UNHASHED bit. - Call d_instantiate() instead of d_add() : dentry is not inserted in hash table. __dpath() & friends work as intended during dentry lifetime. - At dismantle time, once dput() must clear the dentry, setting again DCACHE_UNHASHED bit inside the custom d_delete() function provided by socket code, so that dput() can just kill_it. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] dcache: avoid RCU for never-hashed dentriesEric Dumazet
Some dentries don't need to be globally visible in dentry hashtable. (pipes & sockets) Such dentries dont need to wait for a RCU grace period at delete time. Being able to free them permits a better CPU cache use (hot cache) This patch combined with (dont insert pipe dentries into dentry_hashtable) reduced time of { pipe(p); close(p[0]); close(p[1]);} on my UP machine (1.6 GHz Pentium-M) from 3.23 us to 2.86 us (But this patch does not depend on other patches, only bench results) Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Maneesh Soni <maneesh@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] don't insert pipe dentries into dentry_hashtable.Eric Dumazet
We currently insert pipe dentries into the global dentry hashtable. This is suboptimal because there is currently no way these entries can be used for a lookup(). (/proc/xxx/fd/xxx uses a different mechanism). Inserting them in dentry hashtable slows dcache lookups. To let __dpath() still work correctly (ie not adding a " (deleted)") after dentry name, we do : - Right after d_alloc(), pretend they are hashed by clearing the DCACHE_UNHASHED bit. - Call d_instantiate() instead of d_add() : dentry is not inserted in hash table. __dpath() & friends work as intended during dentry lifetime. - At dismantle time, once dput() must clear the dentry, setting again DCACHE_UNHASHED bit inside the custom d_delete() function provided by pipe code, so that dput() can just kill_it. This patch, combined with (avoid RCU for never hashed dentries) reduced time of { pipe(p); close(p[0]); close(p[1]);} on my UP machine (1.6GHz Pentium-M) from 3.23 us to 2.86 us (But this patch does not depend on other patches, only bench results) Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] rcu: add a prefetch() in rcu_do_batch()Eric Dumazet
On some workloads, (for example when lot of close() syscalls are done), RCU qlen can be quite large, and RCU heads are no longer in cpu cache when rcu_do_batch() is called. This patch adds a prefetch() in rcu_do_batch() to give CPU a hint to bring back cache lines containing 'struct rcu_head's. Most list manipulations macros include prefetch(), but not open coded ones (at least with current C compilers :) ) I got a nice speedup on a trivial benchmark (3.48 us per iteration instead of 3.95 us on a 1.6 GHz Pentium-M) while (1) { pipe(p); close(fd[0]); close(fd[1]);} Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] kernel-api book: remove videodev chapterRandy Dunlap
Remove the videodev chapter from the kernel-api book. It's done much better in the videobook kernel-doc. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] kernel-doc: fix fusion and i2o docsRandy Dunlap
Correct lots of typos, kernel-doc warnings, & kernel-doc usage in fusion and i2o drivers. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] kernel-doc: add fusion and i2o to kernel-api bookRandy Dunlap
Add Fusion and I2O message-based device interfaces to kernel-api book. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] export toshiba SMM support for neofb moduleRandy Dunlap
When CONFIG_TOSHIBA=y and CONFIG_FB_NEOMAGIC=m, tosh_smm() needs to be exported for neofb to use it. WARNING: "tosh_smm" [drivers/video/neofb.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] CISS: require same SCSI module supportRandy Dunlap
Building CCISS SCSI tape support in-kernel when SCSI=m causes build errors, so require SCSI support to be =y or same as CCISS SCSI tape support. drivers/built-in.o: In function `cciss_remove_one': cciss.c:(.text+0x79d4c): undefined reference to `scsi_remove_host' cciss.c:(.text+0x79d55): undefined reference to `scsi_host_put' drivers/built-in.o: In function `cciss_update_non_disk_devices': cciss.c:(.text+0x7bb54): undefined reference to `scsi_device_type' cciss.c:(.text+0x7bcc8): undefined reference to `scsi_device_type' cciss.c:(.text+0x7be81): undefined reference to `scsi_device_type' cciss.c:(.text+0x7bf81): undefined reference to `scsi_device_type' drivers/built-in.o: In function `cciss_proc_write': cciss.c:(.text+0x7c175): undefined reference to `scsi_host_alloc' cciss.c:(.text+0x7c1ed): undefined reference to `scsi_add_host' cciss.c:(.text+0x7c1f9): undefined reference to `scsi_scan_host' cciss.c:(.text+0x7c206): undefined reference to `scsi_host_put' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] add return value checking of get_user() in set_vesa_blanking()Yoichi Yuasa
[akpm@osdl.org: bugfix] Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>