aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-11[POWERPC] Fix SPU coredump code for max_fdset removalPaul Mackerras
Commit bbea9f69668a3d0cf9feba15a724cd02896f8675 removed the max_fdset element of struct fdtable. It appears that checking max_fds is sufficient now. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-11[POWERPC] Fix irq routing on some 32-bit PowerMacsBenjamin Herrenschmidt
The changes to use pci_read_irq_line() broke interrupt parsing on some 32-bit powermacs (oops). The reason is a bit obscure. The code to parse interrupts happens earlier now, during pcibios_fixup() as the PCI bus is being probed. However, the current implementation pci_device_to_OF_node() for 32-bit powerpc relies, on machines like PowerMac which renumber PCI buses, on a table called pci_OF_bus_map containing a map of bus numbers between the kernel and the firmware which is setup only later. Thus, it fails to match the device node. In addition, some of Apple internal PCI devices lack a proper PCI_INTERRUPT_PIN, thus preventing the fallback mapping code to work. This patch fixes it by making pci_device_to_OF_node() 32-bit implementation use a different algorithm that works without using the pci_OF_bus_map thing (which I intend to deprecate anyway). It's a bit slower but that function isn't called in any hot path hopefully. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2006-12-11[POWERPC] ps3: Add vuart supportGeoff Levand
Adds support for the PS3 virtual UART (vuart). The vuart provides a bi-directional byte stream data link between logical partitions. This is needed for the ps3 graphics driver and the ps3 power control support to be able to communicate with the lv1 policy module. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-11[POWERPC] Support ibm,dynamic-reconfiguration-memory nodesPaul Mackerras
For PAPR partitions with large amounts of memory, the firmware has an alternative, more compact representation for the information about the memory in the partition and its NUMA associativity information. This adds the code to the kernel to parse this alternative representation. The other part of this patch is telling the firmware that we can handle the alternative representation. There is however a subtlety here, because the firmware will invoke a reboot if the memory representation we request is different from the representation that firmware is currently using. This is because firmware can't change the representation on the fly. Further, some firmware versions used on POWER5+ machines have a bug where this reboot leaves the machine with an altered value of load-base, which will prevent any kernel booting until it is reset to the normal value (0x4000). Because of this bug, we do NOT set fake_elf.rpanote.new_mem_def = 1, and thus we do not request the new representation on POWER5+ and earlier machines. We do request the new representation on POWER6, which uses the ibm,client-architecture-support call. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-09[POWERPC] dont allow pSeries_probe to succeed without initialising MMUAnton Blanchard
pSeries_probe can decide that we are a pseries but then fail to initialise the MMU. If an rtas node doesnt exist, we continually fall out of pSeries_probe_hypertas early and never get to the MMU init code. While pseries without RTAS is an illegal combination, the way we currently fail is a pain to track down, and can happen if your flattened device tree code has issues (like mine did :). With the following patch we init the MMU, come up and print some warnings about RTAS not existing, instead of looping on 0x400 exceptions. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-09[POWERPC] micro optimise pSeries_probeAnton Blanchard
We find the OF root the line before, we may as well use it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-09[POWERPC] Add SPURR SPR to sysfsAnton Blanchard
Now we have a SPURR cpu feature bit, we can export it to userspace in sysfs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-09[POWERPC] Add DSCR SPR to sysfsAnton Blanchard
POWER6 adds a new SPR, the data stream control register (DSCR). It can be used to adjust how agressive the prefetch mechanisms are. Its possible we may want to context switch this, but for now just export it to userspace via sysfs so we can adjust it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Fix mmap of PCI resource with hack for XBenjamin Herrenschmidt
The powerpc version of pci_resource_to_user() and associated hooks used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some time on machines that don't have a 1:1 mapping of devices (basically on non-PowerMacs) and have PCI devices above 32 bits. This attempts to fix it as well as possible. The rule is supposed to be that pci_resource_to_user() always converts the resources back into a BAR values since that's what the /proc interface was supposed to deal with. However, for X to work on platforms where PCI MMIO is not mapped 1:1, it became a habit of platforms like powerpc to pass "fixed up" values there since X expects to be able to use values from /proc/bus/pci/devices as offsets to mmap of /dev/mem... So we keep that contraption here, causing also /sys/*/resource to expose fully absolute MMIO addresses instead of BAR values, which is ugly, but should still work as long as those are only used to calculate alignment within a page. X is still broken when built 32 bits on machines where PCI MMIO can be above 32-bit space unfortunately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] iSeries: head_64.o needs to depend on lparmap.sStephen Rothwell
This dependency was inadvertantly removed in a previous patch (e73aedba562d1e7777287043afb8e46131ed402e). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] cbe_thermal: Fix initialization of sysfs attribute_groupChristian Krafft
This patch adds NULL to the initialization of the attribute_groups. The spu_attributes and ppe_attributes arrays are arrays of pointers that need to be terminated with a NULL entry. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Remove QE header files from lite5200.cTimur Tabi
The MPC 5200 does not have a QUICCEngine (QE), so lite5200.c should not include the QE header files. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] of_platform_make_bus_id(): make `magic' intGeert Uytterhoeven
of_platform_make_bus_id(): Kill a compiler warning which is a real bug on PPC64 by changing `magic' to `int'. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] maple: Use RTAS for reboot and haltNathan Lynch
On maple, use the RTAS "system-reboot" and "power-off" methods if they are available. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Add rtas_service_present() helperNathan Lynch
To test for the existence of an RTAS function, we typically do: foo_token = rtas_token("foo"); if (foo_token == RTAS_UNKNOWN_SERVICE) return; Add a rtas_service_present method, which provides a more conventional boolean interface for testing the existence of an RTAS method. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] maple: Select PPC_RTASNathan Lynch
Some systems supported by the maple platform have RTAS; make PPC_MAPLE select PPC_RTAS. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] maple: Match "pcie" name for CPC945Nathan Lynch
Some firmwares have "pcie" for the "name" property of the CPC945 PCI Express host bridge. Check for "pcie" in addition to "pci" so we don't miss it. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] qe_ic: Do a sync when masking interruptsScott Wood
This patch causes a sync do be done after masking a QE interrupt, to ensure that the masking has completed before interrupts are enabled. This allows the masking of the cascade IRQ to be removed without causing spurious interrupts. The mask_and_ack function is also removed and set to the mask function, as the two are identical. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] EEH recovery tweaksLinas Vepstas
If one attempts to create a device driver recovery sequence that does not depend on a hard reset of the device, but simply just attempts to resume processing, then one discovers that the recovery sequence implemented on powerpc is not quite right. This patch fixes this up. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Delete unused irq functions on powerpcMatthew Wilcox
The ack_irq macro is unused and conflicts with James' work to template the generic irq code. mask_irq and unmask_irq are also unused, so delete those macros too. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Define pci_unmap_addr() et al. when CONFIG_NOT_COHERENT_CACHE=yRoland Dreier
The current PowerPC code makes pci_unmap_addr(), pci_unmap_addr_set(), and friends trivial for all 32-bit kernels. This is reasonable, since for those kernels it is true that pci_unmap_single() does not need the DMA address from the original DMA mapping -- in fact, it is a NOP. However, I recently tried the tg3 driver on a PowerPC 440SPe machine, which runs a 32-bit kernel and has non-cache-coherent PCI DMA. I found that the tg3 driver crashed in pci_dma_sync_single_for_cpu(), since for non-coherent systems, that function must invalidate the cache for the DMA address range requested, and therefore it does use the address passed in. tg3 uses a DMA address it stashes away with pci_unmap_addr_set() and retrieves with pci_unmap_addr(). Of course, since pci_unmap_addr() is defined to (0) right now, this doesn't work. It seems to me that the tg3 driver is using pci_unmap_addr() in a legitimate way -- I wouldn't want to have to teach all drivers that they should use pci_unmap_addr() if they only need the address for unmapping functions, but if they want the pci_dma_sync functions, then they have to store the DMA address without the helper macros. The right fix therefore seems to be in the definition of the macros in <asm/pci.h> -- we should use the trivial versions only for 32-bit kernels for coherent systems, and the real versions for both 64-bit kernels and non-coherent systems. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] powerpc: fix build error in rom.cGeoff Levand
Add missing include in rom.c. Fixes this build error when CONFIG_MTD=y: arch/powerpc/sysdev/rom.c:26: error: implicit declaration of function of_platform_device_create Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] cell: Fix spu_info.h header exportArnd Bergmann
It uses #ifdef __KERNEL__, so needs to be processed with unifdef. Signed-off-by: Arnd Bergann <arnd.bergmann@de.ibm.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Cleanup pass over platforms/pseries/hotplug-cpu.cMichael Ellerman
Purely cosmetic. Change pSeries to pseries inline with other parts of the kernel, and fix an overly long line. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Only enable cpu hotplug via RTAS if the required firmware support ↵Michael Ellerman
is found To support cpu hotplug on pseries we require two RTAS tokens. The cpu hotplug machinery should only be wired up if these tokens are found in the device tree. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Move the rest of the hotplug cpu code into ↵Michael Ellerman
platforms/pseries/hotplug-cpu.c Move the rest of the hotplug cpu code from platforms/pseries/smp.c into platforms/pseries/hotplug-cpu.c. Wire up the smp_ops callbacks and the notifier in the hotplug cpu initcall, rather than in smp_init_pseries(). No change in behaviour. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.cMichael Ellerman
Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.c, this allows rtas_stop_self() to be static so remove the prototype. Wire up pSeries_mach_cpu_die() in the initcall, rather than statically in setup.c, the initcall will still run prior to the cpu hotplug code being callable, so there should be no change in behaviour. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Move rtas_stop_self() into platforms/pseries/hotplug-cpu.cMichael Ellerman
As the first step in consolidating the pseries hotplug cpu code, create platforms/pseries/hotplug-cpu.c and move rtas_stop_self() into it. Do the rtas token initialisation in a new initcall, rather than rtas_initialize(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Fix cell pmu initialisationStephen Rothwell
Make sure that the pmu is not initialised unless we are running on a cell. Also make the init routine static. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (55 commits) ieee1394: sbp2: code formatting around work_struct stuff ieee1394: nodemgr: remove a kcalloc ieee1394: conditionally export ieee1394_bus_type ieee1394: Consolidate driver registering ieee1394: sbp2: convert from PCI DMA to generic DMA ieee1394: nodemgr: spaces to tabs ieee1394: nodemgr: fix deadlock in shutdown ieee1394: nodemgr: remove duplicate assignment sbp2: make 1bit bitfield unsigned ieee1394: schedule *_oui sysfs attributes for removal ieee1394: schedule unused symbol exports for removal ieee1394: dv1394: schedule for feature removal ieee1394: raw1394: defer feature removal of old isoch interface ieee1394: ohci1394: call PMac code in shutdown only for proper machines ieee1394: ohci1394: reformat PPC_PMAC platform code ieee1394: ohci1394: add PPC_PMAC platform code to driver probe ieee1394: sbp2: wrap two functions into one ieee1394: sbp2: update comment on things to do ieee1394: sbp2: use list_move_tail() ieee1394: sbp2: more concise names for types and variables ...
2006-12-07Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits) [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked [ARM] 4001/1: S3C24XX: shorten reboot time [ARM] 3983/2: remove unused argument to __bug() [ARM] 4000/1: Osiris: add third serial port in [ARM] 3999/1: RX3715: suspend to RAM support [ARM] 3998/1: VR1000: LED platform devices [ARM] 3995/1: iop13xx: add iop13xx support [ARM] 3968/1: iop13xx: add iop13xx_defconfig [ARM] Update mach-types [ARM] Allow gcc to optimise arm_add_memory a little more [ARM] 3991/1: i.MX/MX1 high resolution time source [ARM] 3990/1: i.MX/MX1 more precise PLL decode [ARM] 3986/1: H1940: suspend to RAM support [ARM] 3985/1: ixp4xx clocksource cleanup [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2) [ARM] 3994/1: ixp23xx: fix handling of pci master aborts [ARM] 3981/1: sched_clock for PXA2xx [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter ...
2006-12-07Merge branch 'release' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] replace kmalloc+memset with kzalloc [IA64] resolve name clash by renaming is_available_memory() [IA64] Need export for csum_ipv6_magic [IA64] Fix DISCONTIGMEM without VIRTUAL_MEM_MAP [PATCH] Add support for type argument in PAL_GET_PSTATE [IA64] tidy up return value of ip_fast_csum [IA64] implement csum_ipv6_magic for ia64. [IA64] More Itanium PAL spec updates [IA64] Update processor_info features [IA64] Add se bit to Processor State Parameter structure [IA64] Add dp bit to cache and bus check structs [IA64] SN: Correctly update smp_affinty mask [IA64] sparse cleanups [IA64] IA64 Kexec/kdump
2006-12-07[ARM] Merge individual ARM sub-treesRussell King
Merge: Atmel AT91RM9200 and AT91SAM9260 changes General ARM developments Disconfiguous memory cleanups 64-bit/32-bit division and sched_clock extension patches EP93xx support changes IOP support changes Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07Merge branch 'intx' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'intx' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: PCI MSI: always toggle legacy-INTx-enable bit upon MSI entry/exit
2006-12-07[ARM] 4002/1: S3C24XX: leave parent IRQs unmaskedBen Dooks
Do not bother masking/unmasking the parent IRQ for the mulitplexed EINT irqs, as masking the leaf seems to be fine. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 4001/1: S3C24XX: shorten reboot timeBen Dooks
Cut down the time between requesting a reboot and actually getting the reboot to happen by a quarter. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07PCI MSI: always toggle legacy-INTx-enable bit upon MSI entry/exitJeff Garzik
The current code (prior to this change) would disable the PCI INTx legacy interrupt when enabling MSI... but only on PCI Express. We should do this for all MSI devices, for safety's sake. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07[ARM] 3983/2: remove unused argument to __bug()Nicolas Pitre
It appears that include/asm-arm/bug.h requires include/linux/stddef.h for the definition of NULL. It seems that stddef.h was always included indirectly in most cases, and that issue was properly fixed a while ago. Then commit 5047f09b56d0bc3c21aec9cb16de60283da645c6 incorrectly reverted change from commit ff10952a547dad934d9ed9afc5cf579ed1ccb53a (bad dwmw2) and the problem recently resurfaced. Because the third argument to __bug() is never used anyway, RMK suggested getting rid of it entirely instead of readding #include <linux/stddef.h> which this patch does. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 4000/1: Osiris: add third serial port inBen Dooks
Add the mapping for the third S3C2440 serial port into the default serial devices for the Osiris. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3999/1: RX3715: suspend to RAM supportBen Dooks
The RX3715 is similar to the H1940 in the way that suspend to RAM works, so we can use most of the extant support for the H1940 with only a few modifictions Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3998/1: VR1000: LED platform devicesBen Dooks
Support for the GPIO attached LEDs on the VR1000 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07ieee1394: sbp2: code formatting around work_struct stuffStefan Richter
Merge is finished, can bring the code in readable style again. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07ieee1394: nodemgr: remove a kcallocStefan Richter
Was I sleepwalking when I wrote this? Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07ieee1394: conditionally export ieee1394_bus_typeStefan Richter
Follow-up to patch "Consolidate driver registering": Since I plan the lifetime of Linux 2.6.20 to be the deprecation phase of CONFIG_IEEE1394_EXPORT_FULL_API, it seems fair to keep all previously exported symbols available with this option until this phase is over. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07ieee1394: Consolidate driver registeringBen Collins
This patch consolidates some bookkeeping for driver registering. It closely models what pci_register_driver() does. The main addition is that the owner of the driver is set, so we get a proper symlink for /sys/bus/ieee1394/driver/*/module. Also moves setting of name and bus type into nodemgr. Because of this, we can remove the EXPORT_SYMBOL for ieee1394_bus_type, since it's now only used in ieee1394.ko. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07ieee1394: sbp2: convert from PCI DMA to generic DMAStefan Richter
API conversion without change in functionality Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07ieee1394: nodemgr: spaces to tabsStefan Richter
whitespace pedantry Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07ieee1394: nodemgr: fix deadlock in shutdownStefan Richter
If "modprobe ohci1394" was quickly followed by "modprobe -r ohci1394", say with 1 second pause in between, the modprobe -r got stuck in uninterruptible sleep in kthread_stop. At the same time the knodemgrd slept uninterruptibly in bus_rescan_devices_helper. That's because driver_detach took the semaphore of the PCI device and bus_rescan_devices_helper wanted to take the semaphore of the FireWire host device's parent, which is the same semaphore. This was a regression since Linux 2.6.16, commit bf74ad5bc41727d5f2f1c6bedb2c1fac394de731, "Hold the device's parent's lock during probe and remove". The fix (or workaround) adds a dummy driver to the hpsb_host device. Now bus_rescan_devices_helper won't scan the host device anymore. This doesn't hurt since we have no drivers which will bind to these devices and it is unlikely that there will ever be such a driver. The dummy driver is befittingly presented as a representation of ieee1394 itself. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=6706 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07ieee1394: nodemgr: remove duplicate assignmentStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07sbp2: make 1bit bitfield unsignedLuca Tettamanti
A signed single-bit bitfield doesn't make much sense. Make it unsigned. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>