aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7289): cx88: enable IR receiver and real time clock on FusionHDTV7 GoldMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7288): cx88: fix GPIO for FusionHDTV 7 Gold input selectionMichael Krufky
Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection. Fix card textual name to match other FusionHDTV device names. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7287): cx88: add analog support for DVICO FusionHDTV7 GoldSteven Toth
Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7286): limit stack usage of ir-kbd-i2c.cMarcin Slusarz
ir_probe allocated struct i2c_client on stack; it's pretty big structure, so allocate it with kzalloc make checkstack output without this patch: x059d ir_probe [ir-kbd-i2c]: 1000 Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7283): videobuf-dma-sg: Remove unused variableDouglas Schilling Landgraf
Removed warning message: - videobuf-dma-sg.c: In function 'videobuf_dma_unmap': - videobuf-dma-sg.c:281: warning: unused variable 'dev' Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7281): v4l: Deadlock in videobuf-core for DQBUF waiting on QBUFBrandon Philips
Avoid a deadlock where DQBUF is holding the vb_lock while waiting on a QBUF which also needs the vb_lock. Reported by Hans Verkuil <hverkuil@xs4all.nl>. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7276): soc-camera: deactivate cameras when not usedGuennadi Liakhovetski
Only attach cameras to the host interface for probing, then detach until open. This allows platforms with several cameras on an interface, physically supporting only one camera, to handle multiple cameras and activate them selectively after initial probing. The first attach during probe is needed to activate the host interface to be able to physically communicate with cameras. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7274): dabusb: fix shadowed variable warning in dabusb.cHarvey Harrison
drivers/media/video/dabusb.c:208:6: warning: symbol 'buffers' shadows an earlier one drivers/media/video/dabusb.c:63:12: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7273): suppress compound statement warning in dvb-bt8xx.cHarvey Harrison
Prevailing kernel style seems to prefer always using braces for do {} while (). Add braces to dprintk to suppress the sparse warnings: drivers/media/dvb/bt8xx/dvb-bt8xx.c:73:2: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:93:2: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:529:2: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:614:4: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:629:4: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:639:4: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:883:2: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:917:2: warning: do-while statement is not a compound statement Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7271): cx88-cards: Fix powerangel gpio1Mauro Carvalho Chehab
With this gpio, audio works properly. Thanks to Daniel Fraga <fragabr@gmail.com> for helping on fixing the code for Powerangel Real board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7270): cx88-dvb: Renames pci_nano callbackMauro Carvalho Chehab
This callback is specific to pci_nano, since supports only dvb. Renames it to avoid future mistakes. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7269): cx88: Powercolor Angel works only with firmware version 2.5Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7266): cx88-dvb: convert attach_xc3028 into a functionMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7265): cx88: prints an info when xc2028 is set or is attachedMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7264): cx88-cards: always use a level on printk messagesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7263): Some cleanups at cx88 callback methodsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7262): Add support for xc3028-based boardsMauro Carvalho Chehab
This patch adds support for the following saa7134 xc3028 based boards: 132 -> AVerMedia Cardbus TV/Radio (E506R) [1461:f436] 133 -> AVerMedia Hybrid TV/Radio (A16D) [1461:f936] 134 -> Avermedia M115 [1461:a836] 135 -> Compro VideoMate T750 [185b:c900] This is based on a original patch thanks to Markus Rechberger that added xc3028 gpio init code for the above boards. This patch moves saa7134_tuner_callback to saa7134-cards, originally used only by tda8290 DVB-S boards. The callback was made more generic to support other tuners. Currently, it supports both tda8290 and xc2028/xc3028 tuners. Added also the basis for xc5000 tuner callback. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7261): Use the same callback argument as xc3028 and xc5000Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7260): tuner-xc3028: Don't check return code for clock resetMauro Carvalho Chehab
Only tm6000 needs to be aware when a frequency is being changed. This seems to improve channel change detection. Other bridges don't need this. So, better to discard any errors if this fails, and proceed changing the channels. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7259): FusionHDTV DVB-T Pro tuning problem fixesChris Pascoe
It seems that on this board, the demodulator provides the pullup on the I2C bus, which means that calling i2c_gate_ctrl crashes the bus. Turn this off and the xc3028 can talk OK. Also fix some GPIO related settings that became more clear through working on this. Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7258): Support DVB-T tuning on the DViCO FusionHDTV DVB-T ProChris Pascoe
Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board. The IR remote and analog tuner are not supported at this time. Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7257): cx88: Add xc2028/3028 boardsMauro Carvalho Chehab
This patch ports a patch from Markus Rechberger to work with tuner-xc2028. It adds entries for several cx88 boards with xc2038/3028 tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7256): cx88: Add support for tuner-xc3028Mauro Carvalho Chehab
Callback gpio's based on Markus Rechberger, Christopher Pascoe and Steven Toth patches. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7254): cx88: fix FusionHDTV 5 PCI nano name and enable IR supportMichael Krufky
load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7252): cx88: Add support for the Dvico PCI NanoSteven Toth
ATSC is known to work. SVideo / Composite should work (I have no cable to test). Analog tuner support does not work. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7250): Clean up pxa-camera driver, remove non-functional and never ↵Guennadi Liakhovetski
tested pm-support This patch addresses most issues pointed out by Russell and Erik, moves recently introduced into pxa-regs.h camera-specific defines into pxa_camera.c, removes dummy power-management functions, improves function-naming, etc. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7249): Fix advertised pixel formats in mt9m001 and mt9v022Guennadi Liakhovetski
Only advertise pixel formats, that we actually can support in the present configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7248): dabfirmware.h add missing licensemaximilian attems
Received written ack from the dabusb author that the firmware is BSD licensed. As bonus clarify copyright holder. Signed-off-by: maximilian attems <max@stro.at> Acked-by: Deti Fliegl <deti@fliegl.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7245): ivtv: start timer for each DMA transferHans Verkuil
The DMA timeout timer was started once for each set of DMA transfers, but it should be started for each single DMA transfer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7244): ivtv: CROP is not supported for video captureHans Verkuil
CROPCAP suggests that video capture supports cropping, but this is not the case. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7243): ivtv: yuv framebuffer trackingIan Armstrong
The existing yuv code limits output to the display area occupied by the framebuffer. This patch allows the yuv output to be 'detached' via V4L2_FBUF_FLAG_OVERLAY. By default, the yuv output window will be restricted to the framebuffer dimensions and the output position is relative to the top left corner of the framebuffer. This matches the behaviour of previous versions. If V4L2_FBUF_FLAG_OVERLAY is cleared, the yuv output will no longer be linked to the framebuffer. The maximum dimensions are either 720x576 or 720x480 depending on the current broadcast standard, with the output position relative to the top left corner of the display. The framebuffer itself can be resized, moved and panned without affecting the yuv output. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7241): cx25840: code cleanupTyler Trafford
- Use min() - Eliminate extraneous variables Signed-off-by: Tyler Trafford <ttrafford@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7240): tveeprom: remove obsolete i2c driver codeHans Verkuil
The i2c driver code was once added for the out-of-tree ivtv driver, but the ivtv driver hasn't used that for a long time so this code can now be removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7238): make stk_camera_{suspend,resume}() staticAdrian Bunk
This patch makes the needlessly global stk_camera_{suspend,resume}() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7237): Convert videobuf-dma-sg to generic DMA APIGuennadi Liakhovetski
videobuf-dma-sg does not need to depend on PCI. Switch it to using generic DMA API, convert all affected drivers, relax Kconfig restriction, improve compile-time type checking, fix some Coding Style violations while at it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7235): tuner-simple: fix a buffer overflowMauro Carvalho Chehab
simple_set_tv() creates a buffer with 4 elements, and calls simple_std_setup(), passing &buffer[1]. This makes the 5th element of buffer to be initialized to 0, overriding some area outside the buffer. Also, simple_std_setup() receives a buffer as parameter, but the buffer is just overriden after the call, so, it doesn't make much sense to pass it as a parameter. This patch removes buffer[] from the function call, creating, instead, a local var to be used internally. Thanks to Axel Rometsch <axel.rometsch@freenet.de> for pointing the issue. Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7230): saa7134: add support for the MSI TV@nywhere A/D v1.1 cardRussell Kliese
Signed-off-by: Russell Kliese <russell@kliese.wattle.id.au> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7229): saa7134: add support for the Creatix CTX953_V.1.4.3 HybridHermann Pitton
Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7227): saa7134: fixed DVB-S support for Medion/Creatix CTX948Hartmut Hackmann
The I2C bus interface of the LNB supply sits behind the i2c gate of the tda10086, so wrappers were necessary for the set_voltage functions. For the time being, the board will show up as MD8800 Many thanks to Hermann Pitton for his help Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7226): saa7134: add support for the NXP Snake DVB-S reference designHartmut Hackmann
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7224): Initial DVB-S support for MD8800 /CTX948Hartmut Hackmann
Support is not complete yet and untested. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7223): Add support for the ISL6405 dual LNB supply chipHartmut Hackmann
The chip can control 2 LNBs independently. The driver distinguishes them by evaluating the MSB of the override_set parameter of the isl6405_attach function. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7220): drivers/media/video/sn9c102/sn9c102_core.c Fix Unlikely(x) == yRoel Kluin
Fix Unlikely(x) == y Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Reviewed-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7218): Fix breakage in mt9m001 and mt9v022 driver if ↵Guennadi Liakhovetski
"CONFIG_GENERIC_GPIO is not set" Both camera drivers can function without GPIO support, in which case they will only support the 10 bit data width mode. But the two respective switch have to depend on CONFIG_GENERIC_GPIO. Additionally remove redundant gpio_is_valid tests - they are repeated in bus_switch_request() functions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7217): Replace NO_GPIO with gpio_is_valid()Guennadi Liakhovetski
Upon suggestion by David Brownell use a gpio_is_valid() predicate instead of an explicit NO_GPIO macro. The respective patch to include/asm-generic/gpio.h has been accepted upstream. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7214): tda18271: move init functions to directly above tda18271_tuneMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7213): tda18271: consolidate tune functionsMichael Krufky
combine tda18271c1_tune and tda18271c2_tune into a single function Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7212): tda18271: move rf calibration code from tda18271c1_tune into ↵Michael Krufky
a new function move rf calibration code from tda18271c1_tune into a new function, tda18271c1_rf_tracking_filter_calibration Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7211): tda18271: remove duplicated channel configuration code from ↵Michael Krufky
tda18271c1_tune remove duplicated channel configuration code from tda18271c1_tune, instead call function tda18271_channel_configuration Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7204): remove V4L2_CID_SHARPNESS from meye.h and report private ↵Brandon Philips
control as DISABLED - Continue to support the V4L2_CID_PRIVATE_BASE + 1 control in the ABI - Report the same control as V4L2_CID_SHARPNESS - Report the private control disabled via QUERYCTRL Signed-off-by: Brandon Philips <bphilips@suse.de> Acked-by: Stelian Pop <stelian@popies.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>