| Age | Commit message (Collapse) | Author |
|---|
|
Removed unused macros. Ensure that multiple parameters always have a space
after a comma. Cleanup some comments.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Fixes warning from exconfig.c on 64-bit build.
AK: This actually was fixed earlier in Linux, this just syncs with
AK: the version of the fix that went into the ACPCA codebase
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Examines the return object from a call to acpi_evaluate_object.
Any Index or RefOf references are automatically dereferenced in
an attempt to return something useful (these reference types
cannot be converted into an external ACPI_OBJECT.)
Lin Ming, Bob Moore.
http://bugzilla.kernel.org/show_bug.cgi?id=11105
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Return status from acpi_ut_init_globals. This is used by both
the kernel subsystem and the utilities such as iASL compiler.
The function could possibly fail when the caches are initialized.
Yang Yi.
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Split the ACPI table compare. First check that the lengths match
exactly. Then compare the data.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The "minimal" descriptors such as EndTag are calculated as 12
bytes long, but the actual length in the internal descriptor is
16 because of the round-up to 8 on 64-bit build.
http://www.acpica.org/bugzilla/show_bug.cgi?id=728
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Without this change, a table cannot be loaded again once it has
been loaded/unloaded one time. The current mechanism does not
unregister a table upon an unload. During a load, if the same
table is found, this no longer returns an exception.
http://www.acpica.org/bugzilla/show_bug.cgi?id=722
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Return AE_BAD_PARAMETER if input handle is invalid.
http://www.acpica.org/bugzilla/show_bug.cgi?id=474
Signed-off-by: Fiodor Suietov <fiodor.f.suietov@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Previously, dynamically loaded tables were simply mapped, but on some machines
this memory is corrupted after suspend. Now copy the table to a local buffer.
For OpRegion case, added checksum verify. Use the table length from the table header,
not the region length. For Buffer case, use the table length also.
http://bugzilla.kernel.org/show_bug.cgi?id=10734
Signed-off-by: Dennis Noordsij <dennis.noordsij@helsinki.fi>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
panasonic-laptop uses many acpi_*() functions so it should
depend on ACPI; otherwise there are approximately 70
warnings/errors generated.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
OpRegion
Based on analysis and a patch from Matthew Garrett <mjg59@srcf.ucam.org>.
Instruct the ThinkPad ACPI firmware to remove delays on the processing of
backlight brightness changes. This method is present on ThinkPad
Vista-compatible BIOSes with standard ACPI backlight level control.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Yves-Alexis Perez <corsac@debian.org>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Trivial fix makes the error message match the code before it (ibm->driver
vs ibm->acpi-driver) better.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Attempt to preserve fan state across sleep and hibernation if the fan
control mode is enabled.
For safety reasons, only the PWM OFF (fan at 100%) or maximum
closed-loop level (level 7) are preserved. If the fan state was set
to anything else, it will not be restored.
Also, should the fan be at PWM OFF mode at resume, it will be left at
that state (but this is extremely unlikely, no ThinkPad firmware was
ever reported to do this).
For reference, the known states used for fan control upon resume by
the firmware are either "auto" or "level 7" depending on whether the
laptop wakes due to normal conditions or a thermal emergency.
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11331
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Code in `pci_link.c' is calling the internal routine `acpi_ut_evaluate_object'
which is dangerous given that it is passing a NULL pointer when it should
be passing a pointer to a real object. The patch corrects the issue by
having the code call the external routine `acpi_evaluate_object', which
correctly handles a NULL pointer.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
According to ACPI spec when the status of some device is not present
but functional, the device is valid and the children of this device
should be enumerated. It means that the device should be added to
linux acpi device tree. But the device driver for this device should not
be loaded.
The detailed info can be found in the section 6.3.7 of ACPI 3.0b spec.
_STA may return bit 0 clear (not present) with bit 3 set (device is
functional). This case is used to indicate a valid device for which no
device driver should be loaded (for example, a bridge device.).
Children of this device may be present and valid. OS should continue
enumeration below a device whose _STA returns this bit combination
http://bugzilla.kernel.org/show_bug.cgi?id=3358
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add the DMI check to disable power check in the course of device power
transistion.
http://bugzilla.kernel.org/show_bug.cgi?id=11000
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
transition
Maybe the incorrect power state is returned on the bogus bios, which
is different with the real power state. For example: the bios returns D0
state and the real power state is D3. OS expects to set the device to D0
state. In such case if OS uses the power state returned by the BIOS and
checks the device power state very strictly in power transition, the device
can't be transited to the correct power state.
So the boot option of "acpi.power_nocheck=1" is added to avoid checking
the device power in the course of device power transition.
http://bugzilla.kernel.org/show_bug.cgi?id=8049
http://bugzilla.kernel.org/show_bug.cgi?id=11000
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Attach the ACPI device to the ACPI handle as early as possible so that OS
can get the corresponding ACPI device by the acpi handle in the course
of getting the power/wakeup/performance flags.
http://bugzilla.kernel.org/show_bug.cgi?id=8049
http://bugzilla.kernel.org/show_bug.cgi?id=11000
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Get the device power state in the course of scanning device if the device
power flag is power_managable. i.e. The device has the _PSx/_PRx object.
At the same time before the drivers/acpi/power module is loaded, there is no
relation between acpi_power_resource and acpi device. So the first parameter
of acpi_power_get_state is changed to acpi_handle.
http://bugzilla.kernel.org/show_bug.cgi?id=8049
http://bugzilla.kernel.org/show_bug.cgi?id=11000
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The AE_BAD_ADDRESS exception code is now unused in ACPICA.
For linux, it's only used at wmi.c and acer-wmi.c.
I checked both wmi.c and acer-wmi.c, the AE_BAD_ADDRESS exception code
has no special meaning. The parent functions just call AE_SUCCESS() or
AE_FAILURE() to check the return status.
So it's safe to replace AE_BAD_ADDRESS with AE_ERROR.
Signed-off-by Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Fix http://bugzilla.kernel.org/show_bug.cgi?id=11613 .
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Initially CONFIG_PM_SLEEP was defined as
CONFIG_SUSPEND || CONFIG_HIBERNATION and some ACPI code, most
importantly the code in drivers/acpi/main.c, was written with this
assumption. Currently, however, CONFIG_PM_SLEEP is also set when
CONFIG_XEN_SAVE_RESTORE is set.
This causes some compilation warnings to appear in
drivers/acpi/main.c if both CONFIG_SUSPEND and CONFIG_HIBERNATION
are unset and CONFIG_PM_SLEEP is set (this was impossible before).
To fix this problem, redefine CONFIG_ACPI_SLEEP do depend directly
on CONFIG_SUSPEND || CONFIG_HIBERNATION, as originally intended, and
use it instead of CONFIG_PM_SLEEP in drivers/acpi/main.c, wherever
appropriate.
Additionally, move the acpi_target_sleep_state definition from under
the #ifdef to prevent compilation from failing in some cases.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The Intel 7300 Memory Controller supports dynamic throttling of memory which can
be used to save power when system is idle. This driver does the memory
throttling when all CPUs are idle on such a system.
Refer to "Intel 7300 Memory Controller Hub (MCH)" datasheet
for the config space description.
Signed-off-by: Andy Henroid <andrew.d.henroid@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
|
|
needed if the i7300_idle driver is to be modular.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates
whether the ACPI reboot mechanism is supported.
However, some boxes have this bit clear, have a valid
ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only
mechanism that works for them after S3.
This suggests that other operating systems may not be checking
the RESET_REG_SUP bit, and are using other means to decide
whether to use the ACPI reboot mechanism or not.
Here we stop checking RESET_REG_SUP.
Instead, When acpi reboot is requested,
only the reset_register is checked. If the following
conditions are met, it indicates that the reset register is supported.
a. reset_register is not zero
b. the access width is eight
c. the bit_offset is zero
http://bugzilla.kernel.org/show_bug.cgi?id=7299
http://bugzilla.kernel.org/show_bug.cgi?id=1148
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Mike Dahlgren <dahlgren@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add support for P30/P35.
http://bugzilla.kernel.org/show_bug.cgi?id=10848
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
http://bugzilla.kernel.org/show_bug.cgi?id=9129
lenb: Note that overriding a critical trip point
may simply fool the user into thinking that they
have control that they do not actually have.
For it is EC firmware that decides when the EC
sends Linux temperature change events, and the
EC may or may not decide to send Linux these events
anywhere in the neighborhood of the fake
override trip points. Beware.
note also that thermal.nocrt is already available
to disable crtical trip point actios,
and thermal.crt=-1 is already available to
disabled critical trip points entirely.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
On some broken BIOS the ACPI object in EC _REG method can't be found in
ACPI namespace, which causes that the status code of AE_NOT_FOUND is returned by
the EC _REG object. In such case the EC device can't be initialized correctly,
which causes that battery/AC adapter can't work normally. As the EC address
space handler is not removed and the memory pointed by its input argument is
already free, sometimes the kernel will also be panic when EC internal register
is still accessed. But the windows can work well on such broken BIOS.
Maybe it will be reasonable that OS ignores the AE_NOT_FOUND error
returned by the EC _REG object and continues to initialize EC device
on some broken BIOS.
For example: the ACPI object in EC _REG method can't be found and status error
code is AE_NOT_FOUND.
http://bugzilla.kernel.org/show_bug.cgi?id=8953
http://bugzilla.kernel.org/show_bug.cgi?id=10237
lenb: we may find a more general solution to this in the future.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
asus_hotk_get_info should return -ENODEV if the model is not supported.
http://bugzilla.kernel.org/show_bug.cgi?id=10389
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
HP xw4600 Workstation is known to require the "old" (ie. compatible
with ACPI 1.0) suspend code ordering, so blacklist it for this
purpose.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: John Brown <john.brown3@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
On some machines, like for example MSI Wind U100, the BIOS doesn't
enable ACPI before returning control to the OS, which sometimes
causes resume to fail. This is against the ACPI specification,
which clearly states that "When the platform is waking from an S1, S2
or S3 state, OSPM assumes the hardware is already in the ACPI mode
and will not issue an ACPI_ENABLE", but it won't hurt to check the
SCI_EN bit and enable ACPI during resume from S3 if this bit is not
set.
Fortunately, we already have acpi_enable() for that, so use it in the
resume code path, before executing _BFS, in analogy with the
resume-from-hibernation code path.
NOTE: We aren't supposed to set SCI_EN directly, because it's owned
by the hardware.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
According to the ACPI specification 2.0c and later, the 64-bit waking vector
should be cleared and the 32-bit waking vector should be used, unless we want
the wake-up code to be called by the BIOS in Protected Mode. Moreover, some
systems (for example HP dv5-1004nr) are known to fail to resume if the 64-bit
waking vector is used. Therefore, modify the code to clear the 64-bit waking
vector, for FACS version 1 or greater, and set the 32-bit one before suspend.
http://bugzilla.kernel.org/show_bug.cgi?id=11368
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The _TTS object is defined in the section 7.3 of acpi 3.0b spec.
The _TTS control method is executed by the OSPM at the beginning of
the sleep transition process for S1,S2, S3, S4, and orderly S5 shutdown.
OS will invoke _TTS before it has notified any native mode device drivers
of the sleep state transition. The target sleeping state value is passed to
the _TTS control method.
The _TTS control method is also executed by the OSPM at the end of
any sleep transition process when the system transitions to S0 from
S1, S2, S3, or S4. The _TTS object should be evaluated after it has
notified any native mode device drivers of the end of the sleep state
transition. The working state value (0) is passed to the _TTS control method.
So it is necessary to add the support for _TTS object. The _TTS object
will be evaluated if it exists.
At the same time a block notifier is added to the reboot notifier list so
that the _TTS object will also be evaluated when the system shutdown.
lenb: note that as of Sep 2008, I've not yet seen _TTS in any shipping BIOS.
So this patch is to future-proof Linux, rather than fix the installed base.
http://bugzilla.kernel.org/show_bug.cgi?id=11132
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
http://bugzilla.kernel.org/show_bug.cgi?id=11345
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
reflect the actual state entered in dev->last_state, when actaul state entered
is different from intended one.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cpuidle accounts the idle time for the C-state it was trying to enter and
not to the actual state that the driver eventually entered. The driver may
select a different state than the one chosen by cpuidle due to
constraints like bus-mastering, etc.
Change the time acounting code to look at the dev->last_state after
returning from target_state->enter(). Driver can modify dev->last_state
internally, inside the enter routine to reflect the actual C-state
entered.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The leading other brand OS appears to clear the WAK_STS flag on resume.
When rebooted, certain BIOSes assume that the system is actually
resuming if it's still set and so fail to reboot correctly. Make sure
that it's cleared at resume time.
Comment clarified as suggested by Bob Moore
http://bugzilla.kernel.org/show_bug.cgi?id=11634
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Romano Giannetti <romano.giannetti@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
arch/x86/kernel/acpi/boot.c:100: warning: 'acpi_mcfg_64bit_base_addr' defined
but not used
http://bugzilla.kernel.org/show_bug.cgi?id=11743
Signed-off-by: Pavel Vasilyev <linuxoid@tochka.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As of version 2.0, ACPI can return 64-bit integers. The current
acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms.
Change the argument to take a pointer to an acpi_integer so we support
64-bit integers on all platforms.
lenb: replaced use of "acpi_integer" with "unsigned long long"
lenb: fixed bug in acpi_thermal_trips_update()
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
when there is no ECDT table and no _INI object for EC device, it will be
enabled before scanning ACPI device. But it is too late after the following
the commit is merged.
>commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e
> Author: Robert Hancock <hancockr@shaw.ca>
> Date: Fri Feb 15 01:27:20 2008 -0800
>x86: validate against acpi motherboard resources
After the above commit is merged, OS will check whether MCFG area is
reserved in ACPI motherboard resources by calling the function of
acpi_get_devices when there exists MCFG table. In the acpi_get_devices the _STA
object will be evaluated to check the status of the ACPI device. On some broken
BIOS the MYEC object of EC device is initialized as one, which indicates that
EC operation region is already accessible before enabling EC device.So on these
broken BIOS the EC operation region will be accessed in course of evaluating
the _STA object before enabling EC device, which causes that OS will print the
following warning messages:
>ACPI Error (evregion-0315): No handler for Region [EC__] (ffff88007f8145e8)
[EmbeddedControl] [20080609]
>ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20080321]
>ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.
EC__.BAT1._STA] (Node ffff81013fc17a00), AE_NOT_EXIST
>ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1.
_STA] (Node ffff81013fc17a00), AE_NOT_EXIST
Although the above warning message is harmless, it looks confusing.
So it is necessary to enable EC device as early as possible.Maybe it is
appropriate to enable it immediately after ACPI full initialization.
http://bugzilla.kernel.org/show_bug.cgi?id=11255
http://bugzilla.kernel.org/show_bug.cgi?id=11374
http://bugzilla.kernel.org/show_bug.cgi?id=11660
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
lenb: stripped patch down to what still applied to new dock.c
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As per Dmitry Torokhov's suggestion, acer-wmi doesn't need a private
workqueue, so remove it.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
This was a workaround for 32bit numa SRAT processing, and we removed those
workarounds, making 32 bit more like 64 bit. HAVE_ARCH_PARSE_SRAT is no
longer defined anywhere.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
