aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-20e1000: enhance frame fragment detectionJesse Brandeburg
Originally From: Neil Horman <nhorman@tuxdriver.com> Modified by: Jesse Brandeburg <jesse.brandeburg@intel.com> Hey all- A security discussion was recently given: http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html And a patch that I submitted awhile back was brought up. Apparently some of their testing revealed that they were able to force a buffer fragment in e1000 in which the trailing fragment was greater than 4 bytes. As a result the fragment check I introduced failed to detect the fragement and a partial invalid frame was passed up into the network stack. I've written this patch to correct it. I'm in the process of testing it now, but it makes good logical sense to me. Effectively it maintains a per-adapter state variable which detects a non-EOP frame, and discards it and subsequent non-EOP frames leading up to _and_ _including_ the next positive-EOP frame (as it is by definition the last fragment). This should prevent any and all partial frames from entering the network stack from e1000. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-20e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()Roel Kluin
The variable count and i are unsigned so the (<|>=)0 tests do not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19netlink: With opcode INET_DIAG_BC_S_LE dport was compared in inet_diag_bc_run()Roel Kluin
The s-port should be compared. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19S2io: two branches the same in wait_for_cmd_complete()Ram Vepa
Fix check to verify if a register bit is set. We have not hit this bug because wait_for_cmd_complete() is always called with S2IO_BIT_RESET. Reported by Roel Kluin <roel.kluin@gmail.com>. Signed-off-by: Ram Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-01-19bfin_mac: use the newer CLKBUFOE bit name via asm/dpmc.hMike Frysinger
This driver tweaks VR_CTL, so pull in the header for the bit defines. Also switch to the new define name as the old one has gone away. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19sfc: QT202x: Remove unreliable MMD check at initialisationMatthew Slattery
Checking the PHY XS MMD here is unnecessary and can give false negatives. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19ucc_geth: Fix full TX queue processingJiajun Wu
commit 7583605b6d29f1f7f6fc505b883328089f3485ad ("ucc_geth: Fix empty TX queue processing") fixed empty TX queue mishandling, but didn't account another corner case: when TX queue becomes full. Without this patch the driver will stop transmiting when TX queue becomes full since 'bd == ugeth->txBd[txQ]' actually checks for two things: queue empty or full. Let's better check for NULL skb, which unambiguously signals an empty queue. Signed-off-by: Jiajun Wu <b06378@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Stable <stable@vger.kernel.org> [2.6.32] Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19phylib: Move workqueue initialization to a proper placeAnton Vorontsov
commit 541cd3ee00a4fe975b22fac6a3bc846bacef37f7 ("phylib: Fix deadlock on resume") caused TI DaVinci EMAC ethernet driver to oops upon resume: PM: resume of devices complete after 237.098 msecs Restarting tasks ... done. kernel BUG at kernel/workqueue.c:354! Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] Backtrace: [<c002c598>] (__bug+0x0/0x2c) from [<c0052a54>] (queue_delayed_work_on+0x74/0xf8) [<c00529e0>] (queue_delayed_work_on+0x0/0xf8) from [<c0052b30>] (queue_delayed_work+0x2c/0x30) The oops pops up because TI DaVinci EMAC driver detaches PHY on suspend and attaches it back on resume. Attaching makes phylib call phy_start_machine() that initializes a workqueue. On the other hand, PHY's resume routine will call phy_start_machine() again, and that will cause the oops since we just destroyed the already scheduled workqueue. This patch fixes the issue by moving workqueue initialization to phy_device_create(). p.s. We don't see this oops with ucc_geth and gianfar drivers because they perform a fine-grained suspend, i.e. they just stop the PHYs without detaching. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19dccp: fix dccp rmmod when kernel configured to use slubNeil Horman
Hey all- I was tinkering with dccp recently and noticed that I BUG halted the kernel when I rmmod-ed the dccp module. The bug halt occured because the page that I passed to kfree failed the PageCompound and PageSlab test in the slub implementation of kfree. I tracked the problem down to the following set of events: 1) dccp, unlike all other uses of kmem_cache_create, allocates a string dynamically when registering a slab cache. This allocated string is freed when the cache is destroyed. 2) Normally, (1) is not an issue, but when Slub is in use, it is possible that caches are 'merged'. This process causes multiple caches of simmilar configuration to use the same cache data structure. When this happens, the new name of the cache is effectively dropped. 3) (2) results in kmem_cache_name returning an ambigous value (i.e. ccid_kmem_cache_destroy, which uses this fuction to retrieve the name pointer for freeing), is no longer guaranteed that the string it assigned is what is returned. 4) If such merge event occurs, ccid_kmem_cache_destroy frees the wrong pointer, which trips over the BUG in the slub implementation of kfree (since its likely not a slab allocation, but rather a pointer into the static string table section. So, what to do about this. At first blush this is pretty clearly a leak in the information that slub owns, and as such a slub bug. Unfortunately, theres no really good way to fix it, without exposing slub specific implementation details to the generic slab interface. Also, even if we could fix this in slub cleanly, I think the RCU free option would force us to do lots of string duplication, not only in slub, but in every slab allocator. As such, I'd like to propose this solution. Basically, I just move the storage for the kmem cache name to the ccid_operations structure. In so doing, we don't have to do the kstrdup or kfree when we allocate/free the various caches for dccp, and so we avoid the problem, by storing names with static memory, rather than heap, the way all other calls to kmem_cache_create do. I've tested this out myself here, and it solves the problem quite well. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-18zd1211rw: adding 0409:0248 to supported device listHin-Tak Leung
Yasuhiro ABE <yadiary@gmail.com> reported success in sourceforge zd1211-dev list. The device is a NEC Aterm WL54GU usb wireless stick. The brand and retail product name NEC, Aterm PA-WL54GU The USB ID's (duh) ID 0409:0248 The chip ID string zd1211rw 1-1:1.0: zd1211b chip 0409:0248 v4810 high 00-1b-8b AL2230S_RF pa0 g--N- The FCC ID unknown Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Yasuhiro ABE <yadiary@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18p54pci: rx frame length checkChristian Lamparter
A long time ago, a user reported several crashes due to data corruptions which are likely the result of a not-100%-supported, or faulty? PCI bridge. ( http://patchwork.kernel.org/patch/53004/ ) This patch fixes entry #1. "1. p54p_check_rx_ring - skb_over_panic: Under a ping flood or just left running for a bit would panic with a skb_over_panic." As described in the mail: The invalid frame length causes skb_put to bailout and trigger a crash. Note: Simply dropping the frame is problematic, because if its content contains a tx feedback we would lose some portion of the device memory space.... And the driver/mac80211 should handle all other invalid data. Reported-by: Quintin Pitts <geek4linux@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18mac80211: fix sign error in pid controllerBob Copeland
While testing the pid rate controller in mac80211_hwsim, I noticed that once the controller reached 54 Mbit rates, it would fail to lower the rate when necessary. The debug log shows: 1945 186786 pf_sample 50 3534 3577 50 My interpretation is that the fixed point scaling of the target error value (pf) is incorrect: the error value of 50 compared to a target of 14 case should result in a scaling value of (14-50) = -36 * 256 or -9216, but instead it is (14 * 256)-50, or 3534. Correct this by doing fixed point scaling after subtraction. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18iwlwifi: add license to tracing filesReinette Chatre
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18iwlwifi: Fix throughput stall issue in HT mode for 5000Wey-Yi Guy
Similar to 6000 and 1000 series, RTS/CTS is the recommended protection mechanism for 5000 series in HT mode based on the HW design. Using RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment, it also prevent uCode encounter TX FIFO underrun and other HT mode related performance issues. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-17ipv4: don't remove /proc/net/rt_acctAlexey Dobriyan
/proc/net/rt_acct is not created if NET_CLS_ROUTE=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16ax25: netrom: rose: Fix timer oopsesJarek Poplawski
Wrong ax25_cb refcounting in ax25_send_frame() and by its callers can cause timer oopses (first reported with 2.6.29.6 kernel). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14905 Reported-by: Bernard Pidoux <bpidoux@free.fr> Tested-by: Bernard Pidoux <bpidoux@free.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15mac80211: check that ieee80211_set_power_mgmt only handles STA interfaces.Benoit Papillault
ieee80211_set_power_mgmt is meant for STA interfaces only. Moreover, since sdata->u.mgd.mtx is only initialized for STA interfaces, using this code for any other type of interface (like creating a monitor interface) will result in a oops. Cc: stable@kernel.org Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15appletalk:: da.s_net not copied but assigned to itself in aarp_rcv()Roel Kluin
da.s_net was not copied but assigned to itself. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15MAINTAINERS: transfer maintainership of I/OATDan Williams
Dan Williams takes over I/OAT from Maciej Sosnowski Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15dccp_probe: Fix module load dependencies between dccp and dccp_probeNeil Horman
This was just recently reported to me. When built as modules, the dccp_probe module has a silent dependency on the dccp module. This stems from the fact that the module_init routine of dccp_probe registers a jprobe on the dccp_sendmsg symbol. Since the symbol is only referenced as a text string (the .symbol_name field in the jprobe struct) rather than the address of the symbol itself, depmod never picks this dependency up, and so if you load the dccp_probe module without the dccp module loaded, the register_jprobe call fails with an -EINVAL, and the whole module load fails. The fix is pretty easy, we can just wrap the register_jprobe call in a try_then_request_module call, which forces the dependency to get satisfied prior to the probe registration. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14cfg80211: fix channel setting for wextAbhijeet Kolekar
Patch fixes the bug at http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2139 Currently we cannot set the channel using wext extension if we have already associated and disconnected. As cfg80211_mgd_wext_siwfreq will not switch the channel if ssid is set. This fixes it by clearing the ssid. Following is the sequence which it tries to fix. modprobe iwlagn iwconfig wlan0 essid "" ifconfig wlan0 down iwconfig wlan0 chan X wext is marked as deprecate.If we use nl80211 we can easily play with setting the channel. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14iwmc3200wifi: Add UMAC wifi headers to the pmkid commandSamuel Ortiz
Without this header, we can trigger a UMAC crash with debug enabled UMACs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-13net: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=nOctavian Purdila
Fixed build errors introduced by commit 7ad6848c (ip: fix mc_loop checks for tunnels with multicast outer addresses) Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13ipv6: skb_dst() can be NULL in ipv6_hop_jumbo().David S. Miller
This fixes CERT-FI FICORA #341748 Discovered by Olli Jarva and Tuomo Untinen from the CROSS project at Codenomicon Ltd. Just like in CVE-2007-4567, we can't rely upon skb_dst() being non-NULL at this point. We fixed that in commit e76b2b2567b83448c2ee85a896433b96150c92e6 ("[IPV6]: Do no rely on skb->dst before it is assigned.") However commit 483a47d2fe794328d29950fe00ce26dd405d9437 ("ipv6: added net argument to IP6_INC_STATS_BH") put a new version of the same bug into this function. Complicating analysis further, this bug can only trigger when network namespaces are enabled in the build. When namespaces are turned off, the dev_net() does not evaluate it's argument, so the dereference would not occur. So, for a long time, namespaces couldn't be turned on unless SYSFS was disabled. Therefore, this code has largely been disabled except by people turning it on explicitly for namespace development. With help from Eugene Teo <eugene@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Update copyright and driver versionMatt Carlson
This patch updates the copyright notice for 2010 and updates the version number to 3.106. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Disable 5717 serdes and B0 supportMatt Carlson
The B0 revision of the 5717 will not get enough testing by the time 2.6.33 ships. Since the kernel is already at RC3, serdes support will require too many patches to fix. For these reasons, this patch disables 5717 serdes support and will refuse to attach to all 5717 devices that are later than an A0 revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Add reliable serdes detection for 5717 A0Matt Carlson
The serdes status bit does not work as intended for the 5717 A0. This patch implements an alternative detection scheme that will only be valid for A0 revisions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Fix std rx prod ring handlingMatt Carlson
There are some tg3 devices that require the driver to post new rx buffers in smaller increments. Commit 4361935afe3abc3e5a93006b99197fac1fabbd50, "tg3: Consider rx_std_prod_idx a hw mailbox" changed how the driver tracks the rx producer ring updates, but it does not make any special considerations for the above-mentioned devices. For those devices, it is possible for the driver to hit the special case path, which updates the hardware mailbox register but skips updating the shadow software mailbox member. If the special case path represents the final mailbox update for this ISR iteration, the hardware and software mailbox values will be out of sync. Ultimately, this will cause the driver to use a stale mailbox value on the next iteration, which will appear to the hardware as a large rx buffer update. Bad things ensue. The fix is to update the software shadow mailbox member when the special case path is taken. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Fix std prod ring nicaddr for 5787 and 57765Matt Carlson
Commit 87668d352aa8d135bd695a050f18bbfc7b50b506, titled "tg3: Don't touch RCB nic addresses", tried to avoid assigning the nic address of the standard producer ring. Unfortunately, the default nic address is not correct for the 5787, the 5755M, or the 57765. This patch reenables the old behavior and opts out of the assignment only for the 5717. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Tested-by: Chow Loong Jin <hyperair@ubuntu.com> Tested-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13sfc: Fix conditions for MDIO self-testBen Hutchings
The MDIO self-test should not be run on boards without an MDIO PHY, such as SFN5122F-R3 and later revisions. It should also not try to address a specific MMD in an MDIO clause 22 PHY. Check the mode_support field to decide which mode to use, if any. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13sfc: Fix polling for slow MCDI operationsBen Hutchings
When the interface is down and we are using polled mode for MCDI operations, we busy-wait for completion for approximately 1 jiffy using udelay() and then back off to schedule(). But the completion will not wake the task, since we are using polled mode! We must use schedule_timeout_uninterruptible() instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13e1000e: workaround link issues on busy hub in half duplex on 82577/82578Bruce Allan
This patch removes a delay in hardware after every received packet allowing more time for transmitted packets to go out in between received packets in half duplex. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13e1000e: MDIO slow mode should always be done for 82577Bruce Allan
A previous 82577 workaround that set the MDIO access speed to slow mode for every PHY register read/write when the cable is unplugged should instead set the access mode to always be slow before any PHY register access. Since the mode bit gets cleared when the PHY is reset, set the mode after every PHY reset. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13ixgbe: update copyright datesShannon Nelson
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13ixgbe: Do not attempt to perform interrupts in netpoll when downAlexander Duyck
This patch resolves issues seen when running netconsole and rebooting via reboot -f. The issue was due to the fact that we were attempting to perform interrupt actions when the q_vectors and rings had already been freed via the ixgbe_shutdown routines. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-12Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-01-12sky2: Fix oops in sky2_xmit_frame() after TX timeoutJarek Poplawski
During TX timeout procedure dev could be awoken too early, e.g. by sky2_complete_tx() called from sky2_down(). Then sky2_xmit_frame() can run while buffers are freed causing an oops. This patch fixes it by adding netif_device_present() test in sky2_tx_complete(). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14925 With debugging by: Mike McCormack <mikem@ring3k.org> Reported-by: Berck E. Nash <flyboy@gmail.com> Tested-by: Berck E. Nash <flyboy@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-11cfg80211: fix refcount imbalance when wext is disabledJohannes Berg
When CONFIG_CFG80211_WEXT is not set, there is a refcount imbalance with rdev->opencount, fix that by moving it out of the ifdef. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-11mac80211: fix queue selection for data frames on monitor interfacesFelix Fietkau
When ieee80211_monitor_select_queue encounters data frames, it selects the WMM AC based on skb->priority and assumes that skb->priority contains a valid 802.1d tag. However this assumption is incorrect, since ieee80211_select_queue has not been called at this point. If skb->priority > 7, an array overrun occurs, which could lead to invalid values, resulting in crashes in the tx path. Fix this by setting skb->priority based on the 802.11 header for QoS frames and using the default AC for all non-QoS frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-11Documentation/3c509: document ethtool supportBen Hutchings
3c509 was changed to support ethtool in 2002, making the 'xcvr' module parameter obsolete in most cases. More recently 3c509 was converted to the modern driver model and this parameter was removed. Fix the documentation to refer to ethtool rather than the module parameter. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-11af_packet: Don't use skb after dev_queue_xmit()Jarek Poplawski
tpacket_snd() can change and kfree an skb after dev_queue_xmit(), which is illegal. With debugging by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: Michael Breuer <mbreuer@majjas.com> With help from: David S. Miller <davem@davemloft.net> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Tested-by: Michael Breuer<mbreuer@majjas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-11iwlwifi: silence buffer overflow warningDan Carpenter
Smatch (and presumably other static checkers) complain that MAX_TID_COUNT is past the end of the array. In the resulting discussion, Zhu Yi pointed out that this value is not used in real life and the assignment was only there to silence a gcc warning. If there were a bug in the surrounding code and the value were used, the WARN_ON(!qc) would print a warning before the crash. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-10vxge: use pci_dma_mapping_error to test return valueDenis Kirjanov
pci_dma_mapping_error should be used to test return value of pci_map_single or pci_map_page. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2010-01-08iwlwifi: disable tx on beacon update notificationAbhijeet Kolekar
On beacon change update notification from mac we are not disabling the tx in adhoc mode. Mac sends BSS_CHANGED_BEACON_ENABLED when station leaves IBSS. Driver should indicate uCode to not to send anything on receiving this notification. Functionality to indicate uCode is duplicated across two notifications so created a common function called iwl_set_no_assoc. Fix the issue at http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2133. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptrZhu Yi
When txq read_ptr equals to write_ptr, iwl_queue_used should always return false. Because there is no used TFD in this case. This is a complementary fix to the fix already included in commit "iwl3945: fix panic in iwl3945 driver". Both fixes are needed to address the panic below. This problem was discussed on linux-wireless in http://thread.gmane.org/gmane.linux.kernel.wireless.general/43568 <1>[ 7290.414172] IP: [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.414205] PGD 0 <1>[ 7290.414214] Thread overran stack, or stack corrupted <0>[ 7290.414229] Oops: 0002 [#1] PREEMPT SMP <0>[ 7290.414246] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input <4>[ 7290.414265] CPU 0 <4>[ 7290.414274] Modules linked in: af_packet nfsd usb_storage usb_libusual cpufreq_powersave exportfs cpufreq_conservative iwl3945 nfs cpufreq_userspace snd_hda_codec_realtek acpi_cpufreq uvcvideo lockd iwlcore snd_hda_intel joydev coretemp nfs_acl videodev snd_hda_codec mac80211 v4l1_compat snd_hwdep sbp2 v4l2_compat_ioctl32 uhci_hcd psmouse auth_rpcgss ohci1394 cfg80211 ehci_hcd video ieee1394 snd_pcm serio_raw battery ac nvidia(P) usbcore output sunrpc evdev lirc_ene0100 snd_page_alloc rfkill tg3 libphy fuse lzo lzo_decompress lzo_compress <6>[ 7290.414486] Pid: 0, comm: swapper Tainted: P 2.6.32-rc8-wl #213 Aspire 5720 <6>[ 7290.414507] RIP: 0010:[<ffffffffa0dd53a1>] [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <6>[ 7290.414541] RSP: 0018:ffff880002203d60 EFLAGS: 00010246 <6>[ 7290.414557] RAX: 000000000000004f RBX: ffff880064c11600 RCX: 0000000000000013 <6>[ 7290.414576] RDX: ffffffffa0ddcf20 RSI: ffff8800512b7008 RDI: 0000000000000038 <6>[ 7290.414596] RBP: ffff880002203dd0 R08: 0000000000000000 R09: 0000000000000100 <6>[ 7290.414616] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000a0 <6>[ 7290.414635] R13: 0000000000000002 R14: 0000000000000013 R15: 0000000000020201 <6>[ 7290.414655] FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 <6>[ 7290.414677] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <6>[ 7290.414693] CR2: 0000000000000041 CR3: 0000000001001000 CR4: 00000000000006f0 <6>[ 7290.414712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <6>[ 7290.414732] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 7290.414752] Process swapper (pid: 0, threadinfo ffffffff81524000, task ffffffff81528b60) <0>[ 7290.414772] Stack: <4>[ 7290.414780] ffff880002203da0 0000000000000046 0000000000000000 0000000000000046 <4>[ 7290.414804] <0> 0000000000000282 0000000000000282 0000000000000282 ffff880064c12010 <4>[ 7290.414830] <0> ffff880002203db0 ffff880064c11600 ffff880064c12e50 ffff8800512b7000 <0>[ 7290.414858] Call Trace: <0>[ 7290.414867] <IRQ> <4>[ 7290.414884] [<ffffffffa0dc8c47>] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.414910] [<ffffffff8138fc60>] ? _spin_unlock+0x30/0x60 <4>[ 7290.414931] [<ffffffff81049a21>] tasklet_action+0x101/0x110 <4>[ 7290.414950] [<ffffffff8104a3d0>] __do_softirq+0xc0/0x160 <4>[ 7290.414968] [<ffffffff8100d01c>] call_softirq+0x1c/0x30 <4>[ 7290.414986] [<ffffffff8100eff5>] do_softirq+0x75/0xb0 <4>[ 7290.415003] [<ffffffff81049ee5>] irq_exit+0x95/0xa0 <4>[ 7290.415020] [<ffffffff8100e547>] do_IRQ+0x77/0xf0 <4>[ 7290.415038] [<ffffffff8100c7d3>] ret_from_intr+0x0/0xf <0>[ 7290.415052] <EOI> <4>[ 7290.415067] [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415087] [<ffffffff81234f04>] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415107] [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415130] [<ffffffff812c11f3>] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415149] [<ffffffff8100b0d7>] ? cpu_idle+0xa7/0x110 <4>[ 7290.415168] [<ffffffff8137b3d5>] ? rest_init+0x75/0x80 <4>[ 7290.415187] [<ffffffff8158cd0a>] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.415206] [<ffffffff8158c315>] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.415227] [<ffffffff8158c3fd>] ? x86_64_start_kernel+0xe4/0xeb <0>[ 7290.415243] Code: 00 41 39 ce 0f 8d e8 01 00 00 48 8b 47 40 48 63 d2 48 69 d2 98 00 00 00 4c 8b 04 02 48 c7 c2 20 cf dd a0 49 8d 78 38 49 8d 40 4f <c6> 47 09 00 c6 47 0c 00 c6 47 0f 00 c6 47 12 00 c6 47 15 00 49 <1>[ 7290.415382] RIP [<ffffffffa0dd53a1>] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415410] RSP <ffff880002203d60> <0>[ 7290.415421] CR2: 0000000000000041 <4>[ 7290.415436] ---[ end trace ec46807277caa515 ]--- <0>[ 7290.415450] Kernel panic - not syncing: Fatal exception in interrupt <4>[ 7290.415468] Pid: 0, comm: swapper Tainted: P D 2.6.32-rc8-wl #213 <4>[ 7290.415486] Call Trace: <4>[ 7290.415495] <IRQ> [<ffffffff8138c040>] panic+0x7d/0x13a <4>[ 7290.415519] [<ffffffff8101071a>] oops_end+0xda/0xe0 <4>[ 7290.415538] [<ffffffff8102e1ea>] no_context+0xea/0x250 <4>[ 7290.415557] [<ffffffff81038991>] ? select_task_rq_fair+0x511/0x780 <4>[ 7290.415578] [<ffffffff8102e475>] __bad_area_nosemaphore+0x125/0x1e0 <4>[ 7290.415597] [<ffffffff81038d0c>] ? __enqueue_entity+0x7c/0x80 <4>[ 7290.415616] [<ffffffff81039201>] ? enqueue_task_fair+0x111/0x150 <4>[ 7290.415636] [<ffffffff8102e53e>] bad_area_nosemaphore+0xe/0x10 <4>[ 7290.415656] [<ffffffff8102e8fa>] do_page_fault+0x26a/0x320 <4>[ 7290.415674] [<ffffffff813905df>] page_fault+0x1f/0x30 <4>[ 7290.415697] [<ffffffffa0dd53a1>] ? iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415723] [<ffffffffa0dc8c47>] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.415746] [<ffffffff8138fc60>] ? _spin_unlock+0x30/0x60 <4>[ 7290.415764] [<ffffffff81049a21>] tasklet_action+0x101/0x110 <4>[ 7290.415783] [<ffffffff8104a3d0>] __do_softirq+0xc0/0x160 <4>[ 7290.415801] [<ffffffff8100d01c>] call_softirq+0x1c/0x30 <4>[ 7290.415818] [<ffffffff8100eff5>] do_softirq+0x75/0xb0 <4>[ 7290.415835] [<ffffffff81049ee5>] irq_exit+0x95/0xa0 <4>[ 7290.415852] [<ffffffff8100e547>] do_IRQ+0x77/0xf0 <4>[ 7290.415869] [<ffffffff8100c7d3>] ret_from_intr+0x0/0xf <4>[ 7290.415883] <EOI> [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415911] [<ffffffff81234f04>] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415931] [<ffffffff81234efa>] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415952] [<ffffffff812c11f3>] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415971] [<ffffffff8100b0d7>] ? cpu_idle+0xa7/0x110 <4>[ 7290.415989] [<ffffffff8137b3d5>] ? rest_init+0x75/0x80 <4>[ 7290.416007] [<ffffffff8158cd0a>] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.416026] [<ffffffff8158c315>] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.416047] [<ffffffff8158c3fd>] ? x86_64_start_kernel+0xe4/0xeb Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08mac80211: fix endian errorJohannes Berg
I forgot to convert the radiotap length to CPU endian, which sparse found thankfully. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08mac80211: add missing sanity checks for action framesFelix Fietkau
Various missing sanity checks caused rejected action frames to be interpreted as channel switch announcements, which can cause a client mode interface to switch away from its operating channel, thereby losing connectivity. This patch ensures that only spectrum management action frames are processed by the CSA handling function and prevents rejected action frames from getting processed by the MLME code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-08mac80211: fix queue selection for packets injected via monitor interfaceLennert Buytenhek
Commit 'mac80211: fix skb buffering issue' added an ->ndo_select_queue() for monitor interfaces which can end up dereferencing ieee802_1d_to_ac[] beyond the end of the array for injected data packets (as skb->priority isn't guaranteed to be zero or within [0:7]), which then triggers the WARN_ON in net/core/dev.c:dev_cap_txqueue(). Fix this by always setting the priority to zero on injected data frames. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 07:53:56 +0000