aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-10ath9k: Handle different TX and RX streams properly.Senthil Balasubramanian
This patch fixes an issue when the TX and RX streams are different. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath9k: race condition in SCANNING state check during ANI calibrationSenthil Balasubramanian
ANI calibration shouldn't be done when we are not on our home channel. This is already verified. However, it is racy. Fix this by proper spin locks. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath9k: stop ani when the STA gets disconnected.Senthil Balasubramanian
ANI is not required when the STA is disconnected. So stop it and enable ANI for adhoc and monitor mode. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath9k: remove unnecessary STATION mode check.Senthil Balasubramanian
Remove unncessary STATION mode check in ath9k_bss_assoc_info() as it is called only for STATION mode. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: Modify p54 files for new organizationChristian Lamparter
Modify the remaining p54 files to account for the new file organization. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: Move TX/RX codeChristian Lamparter
Copy the TX/RX code from p54common.c into a new file txrx.c Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: Move mac80211 glue codeChristian Lamparter
Copy the mac80211 glue code from p54common.c into a new file main.c Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: Move LMAC interface definitionsChristian Lamparter
Copy the LMAC Interface specific definitions from p54common.h into a new file lmac.h Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: Move LED codeChristian Lamparter
Copy the LED code from p54common.c into a new file led.c Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: Move firmware codeChristian Lamparter
Copy the firmware i/o code from p54common.c into a new file fwio.c Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: Move eeprom headerChristian Lamparter
Copy the eeprom code from p54common.h into a new file eeprom.h Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: Move eeprom codeChristian Lamparter
Copy the eeprom code from p54common.c into a new file eeprom.c Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wireless: remove redundant tests on unsignedRoel Kluin
bufsize and remainder are unsigned. When negative they are wrapped and caught by the other test. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10p54: redo rx_status into skb->cbChristian Lamparter
This patch slightly optimizes p54_rx_data's stack and code size. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ar9170usb: module link in sysfsChristian Lamparter
Andrey Yurovsky reported that the driver forwarded erroneously the parent device structure instead of the real thing, which of course led to some dodgy sysfs links (at least?). Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwlwifi: unify iwl_setup_rxon_timingTomas Winkler
This patch unifies setup_rxon_timing funcions of AGN and 3945. HWs differ only in supported maximal beacon interval. This is reflected in hw_paras.max_beacon_itrvl Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwlwifi: scan requested channels onlyJohannes Berg
When userspace requests only certain channels to be scanned, we currently ignore that request entirely. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwlwifi: make software queue assignment more efficientJohannes Berg
There really is no reason to be assigning txq->swq_id all the time, once at aggregation setup is sufficient. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwlwifi: drop sw_crypto from hw_params.Tomas Winkler
Each HW supported by iwlwifi is capable of hardware crypto so drop this flag from hw_params structure. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwlwifi: Check HW ready before prepare card.Mohamed Abbas
Hardware may be ready for us to manage it without us trying to prepare it first. Check if this is the case. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath9k: differentiate quality reporting between legacy and HT configurationsLuis R. Rodriguez
We were not differentiating quality between legacy and HT configurations. We change this to consider the differences. New theory for reporting quality: At a hardware RSSI of 45 you will be able to use MCS 7 reliably. At a hardware RSSI of 45 you will be able to use MCS 15 reliably. At a hardware RSSI of 35 you should be able use 54 Mbps reliably. MCS 7 is the highets MCS index usable by a 1-stream device. MCS 15 is the highest MCS index usable by a 2-stream device. All ath9k devices are either 1-stream or 2-stream. How many bars you see is derived from the qual reporting. A more elaborate scheme can be used here but it requires tables of SNR/throughput for each possible mode used. For the MCS table you can refer to the wireless wiki: http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n This should fix this bug report: http://bugzilla.kernel.org/show_bug.cgi?id=13537 Cc: Janath.Peiris@atheros.com Cc: Matt.Smith@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10libertas: fix card cleanup order in SDIO driverAndrey Yurovsky
The SDIO driver sets the surpriseremoved flag before calling lbs_remove_card. With IEEE PS enabled, lbs_remove_card must issue a command to exit IEEE PS mode, however with that flag set the command path is blocked and the card is never taken out of IEEE PS mode. This step is required to ensure that the driver can be reloaded. This patch moves the setting of surpriseremoved after lbs_remove_card is called. Tested with V9 firmware by ensuring that IEEE PS is disabled when the driver is removed. Reloading the driver is not fully tested due to a separate issue with module reload in the SDIO driver, however this patch at least leaves the card in a better state when we bring the driver down. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10libertas: correct card cleanup order in SPI driverAndrey Yurovsky
The SPI driver does a couple of card cleanup steps in the wrong order on module removal. If IEEE PS is enabled, this results in the card being left in IEEE PS mode and subsequent failures to reload the module. The problem is that the surpriseremoved flag is set before calling lbs_remove_card, but that function needs to issue a command to exit IEEE PS mode (the flag blocks the command path). In addition, lbs_stop_card should be called first because it clears out any pending commands. Tested on a GSPI device with V9 firmware by confirming that we can reload the module with or without IEEE PS enabled. Also fix a warning from the wrong uint format in a printk. V2: use z modifier, thanks Sebastian. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10libertas: copy WPA keys to priv when associatingAndrey Yurovsky
Libertas currently maintains a copy of the WPA unicast and group keys when using WPA or WPA2. This copy is checked when deciding whether or not to return to sleep in IEEE PS mode but the actual copying back to priv was omitted, which breaks IEEE PS mode with WPA/WPA2 when one issues commands that require temporarily keeping the device awake. This patch introduces the omitted copy-back of the keys so that IEEE PS functions correctly in WPA/WPA2 mode. Thanks to Dan Williams for clearing up the issue. V2: fix typo. Also, this has been tested on GSPI and SDIO with V9 firmware. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: fix giwrangeJohannes Berg
"cfg80211: Advertise ciphers via WE according to driver capability" unfortunately broke iwrange -- it used the variable c that needs to be 0 for the channel list. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10nl80211: limit to one pairwise cipher for associate()Johannes Berg
In this case, only one cipher makes sense, unlike for connect() where it may be possible to have the card or driver select. No changes to mac80211 due to the way the structs are laid out -- but the loop in net/mac80211/cfg.c will degrade to just zero or one passes. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10orinoco: fix printk format specifier for size_t argumentsDavid Kilroy
This addresses the following compile warnings on 64-bit platforms. drivers/net/wireless/orinoco/scan.c: In function 'orinoco_add_hostscan_results': drivers/net/wireless/orinoco/scan.c:194: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/net/wireless/orinoco/scan.c:211: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/net/wireless/orinoco/scan.c:211: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: refuse authenticating to same BSSID twiceJohannes Berg
It is possible that there are different BSS structs with the same BSSID, but we cannot authenticate with multiple of them them because we need the BSSID to be unique for deauthenticating/disassociating. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: keep track of BSSesJohannes Berg
In order to avoid problems with BSS structs going away while they're in use, I've long wanted to make cfg80211 keep track of them. Without the SME, that wasn't doable but now that we have the SME we can do this too. It can keep track of up to four separate authentications and one association, regardless of whether it's controlled by the cfg80211 SME or the userspace SME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: assimilate and export ieee80211_bss_get_ieJohannes Berg
This function from mac80211 seems generally useful, and I will need it in cfg80211 soon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: reset auth algorithmJohannes Berg
When the interface is brought down, we need to reset the auth algorithm because wpa_supplicant doesn't reset it, and then we fail to use shared key auth when required later. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: send events for userspace SMEJohannes Berg
When the userspace SME is in control, we are currently not sending events, but this means that any userspace applications using wext or nl80211 to receive events will not know what's going on unless they can also interpret the nl80211 assoc event. Since we have all the required code, let the SME follow events from the userspace SME, this even means that you will be refused to connect() while the userspace SME is in control and connected. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10mac80211: remove dead code, clean upJohannes Berg
With mac80211 now always controlled by an external SME, a lot of code is dead -- SSID, BSSID, channel selection is always done externally, etc. Additionally, rename IEEE80211_STA_TKIP_WEP_USED to IEEE80211_STA_DISABLE_11N and clean up the code a bit. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10mac80211: remove auth algorithm retryJohannes Berg
The automatic auth algorithm issue is now solved in cfg80211, so mac80211 no longer needs code to try different algorithms -- just using whatever cfg80211 asked for is good. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10mac80211: re-add HT disablingJohannes Berg
The IEEE80211_STA_TKIP_WEP_USED flag is used internally to disable HT when WEP or TKIP are used. Now that cfg80211 is giving us the required information, we can set the flag appropriately again. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement get_wireless_statsJohannes Berg
By dropping the noise reporting, we can implement wireless stats in cfg80211. We also make the handler return NULL if we have no information, which is possible thanks to the recent wext change. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement IWRATEJohannes Berg
For now, let's implement that using a very hackish way: simply mirror the wext API in the cfg80211 API. This will have to be changed later when we implement proper bitrate API. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement IWAP for WDSJohannes Berg
This implements siocsiwap/giwap for WDS mode. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement iwpowerJohannes Berg
Just on/off and timeout, and with a hacky cfg80211 method until we figure out what we want, though this is probably sufficient as we want to use pm_qos for wifi everywhere. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: managed mode wext compatibilityJohannes Berg
This adds code to make it possible to use the cfg80211 connect() API with wireless extensions, and because the previous patch added emulation of that API with auth() and assoc(), by extension also supports wext on that. At the same time, removes code from mac80211 for wext, but doesn't yet clean up mac80211's mlme code more. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: emulate connect with auth/assocJohannes Berg
This adds code to cfg80211 so that drivers (mac80211 right now) that don't implement connect but rather auth/assoc can still be used with the nl80211 connect command. This will also be necessary for the wext compat code. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: connect/disconnect APISamuel Ortiz
This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wireless: define AKM suitesJohannes Berg
We'll need these values for some drivers using connect API and for wext compat code, so let's define them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10mac80211: remove an unused function declarationJohannes Berg
The ieee80211_scan_results function hasn't existed for a long time now, so its declaration should be removed as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: introduce nl80211 testmode commandJohannes Berg
This introduces a new NL80211_CMD_TESTMODE for testing and calibration use with nl80211. There's no multiplexing like like iwpriv had, and the command is not available by default, it needs to be explicitly enabled in Kconfig and shouldn't be enabled in most kernels. The command requires a wiphy index or interface index to identify the device to operate on, and the new TESTDATA attribute. There also is API for sending replies to the command, and testmode multicast messages (on a testmode multicast group). I've also updated mac80211 to be able to pass through the command to the driver, since it itself doesn't implement the testmode command. Additionally, to give people an idea of how to use the command, I've added a little code to hwsim that makes use of the new command to set the powersave mode, this is currently done via debugfs and should remain there, and the testmode command only serves as an example of how to use this best -- with nested netlink attributes in the TESTDATA attribute. A hwsim testmode tool can be found at http://git.sipsolutions.net/hwsim.git/. This tool is BSD licensed so people can easily use it as a basis for their own internal fabrication and validation tools. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wext: constify extra argument to wireless_send_eventJohannes Berg
This is never changed by the function, so can be marked const. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10mac80211: tell SME about real auth stateJohannes Berg
When the auth algorithm is rejected, but we don't have another one to try, we will eventually retry but that isn't useful -- we'll then do it again and again until we eventually give up. Instead, we should let the SME know and go into disabled state. The same applies for situations where the AP rejects with any other status code. Additionally, when trying the next auth algorithm, we should reset the auth_tries so that just a single lost frame doesn't lead to us giving up on the third auth algorithm. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: remove wireless_dev->bssidJohannes Berg
This variable isn't necessary -- the wext code keeps track of the BSSID itself, and otherwise we have current_bss. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: use proper allocation flagsJohannes Berg
Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10nl80211: clean up function definitionsJohannes Berg
I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>