aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-15ide: use __generic_unplug_device() in ide_do_drive_cmd() (take 2)Bartlomiej Zolnierkiewicz
* Call __elv_add_request() with 'plug' == 1 (so the device will be plugged) and then use __generic_unplug_device() instead of calling ide_do_request() directly. v2: * For blk_pm_resume_request() requests the queue is stopped so we need to call ->request_fn explicitly. Thanks to: - Rafael for reporting/bisecting the bug - Borislav/Rafael for testing the fix This is a preparation for converting IDE to use blk_execute_rq(). Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() usersBartlomiej Zolnierkiewicz
* Set REQ_PREEMPT request flag in ide_do_drive_cmd() users for ide_preempt and ide_head_wait action types. * Remove setting REQ_PREEMPT from ide_do_drive_cmd(). While at it: * Set 'where' variable outside ide_lock. This is a preparation for converting IDE to use blk_execute_rq(). There should be no functional changes caused by this patch. Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: use get_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: use clamp_t() rather than nested min_t()/max_t()Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: eliminate FIT() macroHarvey Harrison
Replace the FIT() macro with the kernel-provided clamp_val() macro. FIT was always being called with a member of a struct ide_timing, which are shorts, and constant constraints for the min and max. Thus we can use clamp_val, rather than clamp_t. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: disable drive interrupts in ide_driveid_update()Mikhail Cherkashin
Since ide_driveid_update() uses polling to execute the IDENTIFY DEVICE command but clears nIEN bit in the control register and doesn't mask the IDE interrupt, the latter does happen and lead to the corresponding message to appear: ide0: unexpected interrupt, status=0x58, count=1 when e.g. running hdparm with option -X with a non-PCI IDE driver... Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15palm_bk3710: fix tRP for UDMA mode 4Mikhail Cherkashin
Fix tRP timing for UDMA mode 4 according to the ATA specification. Signed-off-by: Mikhail Cherkashin <mcherkhashin@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: jfs: remove DIRENTSIZ JFS: diAlloc() should return -EIO rather than EIO JFS: skip bad iput() call in error path JFS: switch to seq_files JFS: 0 is not valid errno value so return NULL from jfs_lookup
2008-07-15Fix printk format warning in clocksource/acpi_pm.cLinus Torvalds
For real, this time. The earlier attempt just moved the warning around. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-15[MIPS] Remove mips_machtype for LASAT machinesThomas Bogendoerfer
This is the LASAT part of the mips_machtype removal. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Remove mips_machtype from EMMA2RH machinesThomas Bogendoerfer
This is the EMMA2RH part of the mips_machtype removal. [Ralf: Fixed to the #error statements] Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Remove mips_machtype from ARC based machinesThomas Bogendoerfer
This is the ARC part of the mips_machtype removal. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] MTX-1 flash partition setup move to platform devices registrationYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: cleanup and fix some sparse warningsAtsushi Nemoto
* Do not return void value * Make some functions static * Do not include unnecessary bootinfo.h Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: rename asm-mips/mach-jmr3927 to asm-mips/mach-tx39xxAtsushi Nemoto
Rename mach-jmr3927 directory to more proper name to make adding other platforms easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] remove machtype for group ToshibaYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] separate rbtx4927_time_init() and rbtx4937_time_init()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] separate rbtx4927_arch_init() and rbtx4937_arch_init()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] txx9_cpu_clock setup move to rbtx4927_time_init()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] txx9_board_vec set directly without mips_machtypeYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] IP22: Add platform device for Indy volume buttonsThomas Bogendoerfer
Create platform device for Indy volume buttons and remove button handling from ip22-reset.c Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] cmbvr4133: Remove supportYoichi Yuasa
It cannot be built for a long time and nobody maintains it. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] remove wrppmc_machine_power_off()Yoichi Yuasa
It can be replace wrppmc_machine_halt(). Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] replace inline assembler to cpu_wait()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] IP22/28: Add platform devices for HAL2Thomas Bogendoerfer
Create platform devices for hal2 and add option for selecting HAL2 alsa driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Update and merge defconfigsAtsushi Nemoto
Merge rbhma4200(RBTX4927/37) and rbhma4500(RBTX4938) defconfig into single rbtx49xx defconfig. And jmr3927 defconfig is also updated. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Make single kernel can support multiple boardsAtsushi Nemoto
Make single kernel can be used on RBTX4927/37/38. Also make some SoC-specific code independent from board-specific code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Update defconfigsAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Reorganize PCI codeAtsushi Nemoto
Split out PCIC dependent code and SoC dependent code from board dependent code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code. Also fix some build problems on CONFIG_PCI=n. As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards and PCI66 support is available for all TX49 boards. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] TXx9: Reorganize codeAtsushi Nemoto
Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree. This will help more code sharing and maintainance. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] txx9: Make gpio_txx9 entirely spinlock-safeAtsushi Nemoto
TXx9 GPIO set/get routines are spinlock-safe. This patch make gpio_direction_{input,output} routines also spinlock-safe so that they can be used during early board setup. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Malta: Cleanup organization of code into directories.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Remove always true ifdef conditions.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] MSC01: Cleanup configuration.Ralf Baechle
This shouldn't depend on CONFIG_MIPS_BOARDS_GEN which is about to go away. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Remove impossible ifdef and code wrapped by it.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] SEAD: Remove support code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Atlas: Remove support code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Enable -ffunction-sections sections.Ralf Baechle
-ffunction-sections serves as a workaround for the problems caused by the limited branch range in some inline assembler fragments for very large compilation units. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Bigsur: Make defconfig a bit more useful.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Replace use of print_symbol with new %sP pointer format.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] rbtx4927: misc cleanupsAtsushi Nemoto
* Merge tx4927_pci.h into tx4927.h * Kill (broken) external PCI clock frequency reporting * Kill unnecessary wbflush() * Kill unnecessary includes * Kill debug garbages Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Declare some pci variables in header fileAtsushi Nemoto
Declare pci_probe_only, etc. in asm-mips/pci.h file. This will fix some sparse warnings. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] IP32: Add platform devices for audio and volume buttonThomas Bogendoerfer
Create platform devices for audio and volume button driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] IP28: switch to "normal" mode after PROM no longer neededThomas Bogendoerfer
SGI-IP28 is running in so called slow mode, when kernel is started from the PROM. PROM calls must be done in slow mode otherwise the PROM will issue an error. To get better memory performance we now switch to normal mode, when the PROM is no longer needed. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Add an appropriate header into display.cDmitri Vorobiev
The following errors were caught by sparse: >>>>>>>>>>> arch/mips/mips-boards/generic/display.c:30:6: warning: symbol 'mips_display_message' was not declared. Should it be static? arch/mips/mips-boards/generic/display.c:58:6: warning: symbol 'mips_scroll_message' was not declared. Should it be static? >>>>>>>>>>> This patch includes the asm/mips-boards/prom.h header file into arch/mips/mips-boards/generic/display.c. This adds the needed function declarations, and the errors are gone. Compile-tested using defconfigs for Malta, Atlas and SEAD boards. Runtime test was successfully performed by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Make gcmp_probe() staticDmitri Vorobiev
The gcmp_probe() function is needlessly defined global, and this patch makes it static. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] A few cleanups in malta_int.cDmitri Vorobiev
Both the fill_ipi_map() routine and the gic_intr_map array defined in arch/mips/mips-boards/malta/malta_int.c are not used outside of the latter file. Thus, these objects can become static. Moreover, these two objects are used by the MT code only, which is why this patch adds the appropriate ifdef. While at it, this patch removes an unnecessary preprocessing macro in favor of the commonly used ARRAY_SIZE. Successfully tested using a Qemu-emulated Malta board for both SMP and UP kernels. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Namespace clean-up in arch/mips/pci/pci.cDmitri Vorobiev
The following symbols hose_head hose_tail are needlessly defined global in arch/mips/pci/pci.c, and this patch makes them static. The variable pci_isa_hose is not used, and is removed by this patch. Spotted by namespacecheck. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] i8253: make the pit_clockevent variable staticDmitri Vorobiev
The pit_clockevent symbol is needlessly defined global. This patch makes that variable static. Spotted by sparse. Compile-tested using Malta defconfig. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15[MIPS] Enable FAST-20 for onboard scsiThomas Bogendoerfer
Both onboard controller of the O2 support FAST-20 transfer speeds, but the bit, which signals that to the aic driver, isn't set. Instead of adding detection code to the scsi driver, we just fake the missing bit in the PCI config space of the scsi chips. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 12:59:13 +0000