aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-08cxgb3 - TP SRAM updateDivy Le Ray
The chip executes microcode present in internal RAM, whose content is loaded from EEPROM on power cycle. This patch allows an update of the microcode through PIO without forcing a power cycle. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08cxgb3 - Firmware updateDivy Le Ray
Update FW to 4.1. Proceed to subsequent HW tuning to improve RDMA perfs.. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08cxgb3 - sge page managementDivy Le Ray
Streamline sge page management. Fix dma mappings when buffers are recycled. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08drivers/net: fix comparisons of unsigned < 0Bill Nottingham
Recent gcc versions emit warnings when unsigned variables are compared < 0 or >= 0. Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08PCMCIA-NETDEV : add new ID of lan&modem multifunction cardKomuro
fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08usbnet whitespace fixesDavid Brownell
Whitespace updates for usbnet core, mostly switching to tab-only indents. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-088139cp: Convert to generic booleanRichard Knutsson
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08phylib: m88e1111: enable SGMII modeKapil Juneja
If connected via SGMII, initialize with SGMII mode configured. Signed-off-by: Kapil Juneja <Kapil.Juneja@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08gianfar: add support for SGMIIKapil Juneja
Add code for initialising and configuring TBI interface and programming it for connecting to on-chip SERDES (Lynx PHY) in case of SGMII mode selected through HRCW at reset. also add defines for TBI register configuration. TBI interface is programmed towards the SERDES. refactored mdio read/write functions to differentiate programming local interface MII regs (e.g., for TBI) from always programming the mdio master (TSEC1, for programming the PHYs). Signed-off-by: Kapil Juneja <Kapil.Juneja@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08phylib: add the ICPlus IP175C PHY driverMichael Barkowski
The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition to a dedicated 100Mbit/s WAN port. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08s2io: add PCI error recovery supportLinas Vepstas
s2io cleanup suggestions, per discussion on mailing lists. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08s2io: add PCI error recovery supportLinas Vepstas
This patch adds PCI error recovery support to the s2io 10-Gigabit ethernet device driver. Third revision, blocks interrupts and the watchdog. Tested, seems to work well. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: Ramkrishna Vepa <Ramkrishna.Vepa@neterion.com> Cc: Raghavendra Koushik <raghavendra.koushik@neterion.com> Cc: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08[PATCH] hostap: Remove driver version numberJouni Malinen
The driver version number has not been updated since the driver was included in the main kernel tree and there is no plan on updating this in the future either. At this point, the only correct way to refer to the version is to use the kernel version. The 0.4.4 version is confusing since there are external version with higher version number even though they are not actually any newer than the in-tree version. Let's get rid of the version number in the kernel tree in order to avoid this kind of confusion. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] hostap: Use list_for_each_entryMatthias Kaehlcke
Use list_for_each_entry() instead of manual iteration and substitute some list_for_each() loops with list_for_each_entry(). Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] hostap: Suppress broadcast if no stations are associatedPavel Roskin
This may be useful in mesh setups when most stations act as repeaters only. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] softmac: use list_for_each_entryAkinobu Mita
Cleanup using list_for_each_entry. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Joe Jezak <josejx@gentoo.org> Cc: Daniel Drake <dsd@gentoo.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] bcm43xx: Fix deviation from specifications in set_baseband_attenuationLarry Finger
A disagreement between the specifications and the bcm43xx code has just been discovered and is hereby fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] zd1211rw: Make CCK gain patching conditional on RF typeDaniel Drake
The vendor driver code suggests that CR47 patching happens on every channel change for every RF (depending on bit 8 in POD). Due to a bug in their driver (upper bits of RF_Mode get zeroed out, then are examined for 1s when setting some other flags), this isn't actually what happens, and their generic CCK patching routine never takes effect. Some of their RF configurations do include explicit (duplicated) code for CR47 patching though. This patch makes zd1211rw match that behaviour. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] zd1211rw: Add UW2453 RF supportDaniel Drake
This patch adds support for another radio appearing in new devices: the Ubec UW2453. It's more complicated than the other RF's we support, but Ubec publish full tech specs so we're able to understand the vendor code relatively well. Now that we support UW2453, we also support Atheros' new USB chip: the AR5007UG. From the little info we have, this appears to be just a rebranded ZD1211B. This RF code doesn't work very well -- lots more TX/RX errors than the other RFs. However, the vendor driver doesn't do any better, so this is all we can do for now. [kune@deine-taler.de: bug fixes] Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] zd1211rw: Extend RF layerDaniel Drake
These changes are needed for UW2453 RF support: Add pointer which RF drivers can use to store private RF data Add exit hook so that RF drivers can free private data Allow RF's to disable the generic TX power integration handling code Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] zd1211rw: Add ID for ZyXEL G-200v2Daniel Drake
Tested by Guy Gallagher zd1211 chip 0586:3407 v4721 high 00-13-49 AL2230_RF pa0 g--- FCC ID SI5WUB200Z Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] rtl8187: add header blocks and indicate origin of magic valuesJohn W. Linville
Add top-of-file comment blocks to rtl818x headers and attribute origin of magic values to original r8187 driver. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] eeprom_93cx6: shorten pulse timing to match specJohn W. Linville
93cx6 datasheet available here: http://ww1.microchip.com/downloads/en/DeviceDoc/21749F.pdf Figure 1-1 and Table 1-2 on pages 4-5 indicate that both Clock High Time and Clock Low Time have largest minimum times of 450ns. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] Add rtl8187 wireless driverMichael Wu
This patch adds a mac80211 based wireless driver for the rtl8187 USB wireless card. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] eeprom_93cx6: Add comment for 1us delay after pulseIvo van Doorn
This will add a comment for the 1us delay which is taken after the pulse has been switched. The 1us delay is based on the specifications so that should be made clear. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] Add 93cx6 eeprom libraryIvo van Doorn
This patch adds a library for reading from 93cx6 eeproms. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08Linux 2.6.22Linus Torvalds
Woo-hoo. I'm sure somebody will report a "this doesn't compile, and I have a new root exploit" five minutes after release, but it still feels good ;) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-08Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: qd65xx: fix PIO mode selection sis5513: adding PCI-ID
2007-07-08Fix permission checking for the new utimensat() system callLinus Torvalds
Commit 1c710c896eb461895d3c399e15bb5f20b39c9073 added the utimensat() system call, but didn't handle the case of checking for the writability of the target right, when the target was a file descriptor, not a filename. We cannot use vfs_permission(MAY_WRITE) for that case, and need to simply check whether the file descriptor is writable. The oops from using the wrong function was noticed and narrowed down by Markus Trippelsdorf. Cc: Ulrich Drepper <drepper@redhat.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-08mm: double mark_page_accessed() in read_cache_page_async()Peter Zijlstra
Fix a post-2.6.21 regression. read_cache_page_async() has two invocations of mark_page_accessed() which will launch pages right onto the active list. Remove the first one, keeping the latter one. This avoids marking unwanted pages active (in the retry loop). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-08qd65xx: fix PIO mode selectionBartlomiej Zolnierkiewicz
PIO4 is a maximum PIO mode supported by a driver. Using "255" as a max_mode argument to ide_get_best_pio_mode() could result in wrong timings being used by a driver (for "pio" equal to 5) or OOPS (for "pio" values > 5 && < 255). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2007-07-08sis5513: adding PCI-IDUwe Koziolek
The SiS966 has one additional PCI-ID 1180. If the chipset is using this PCI-ID, the primary channel is connected to the first PATA-port. The secondary channel is connected to SATA-ports in IDE emulation mode. The legacy IO-ports are used. The including of the PCI-ID into pata_sis is not sufficient, because the legacy driver in drivers/ide is initialized before pata_sis. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-07DLM must depend on SYSFSAdrian Bunk
The dependency of DLM on SYSFS got lost in commit 6ed7257b46709e87d79ac2b6b819b7e0c9184998 resulting in the following compile error with CONFIG_DLM=y, CONFIG_SYSFS=n: <-- snip --> ... LD .tmp_vmlinux1 fs/built-in.o: In function `dlm_lockspace_init': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/dlm/lockspace.c:231: undefined reference to `kernel_subsys' fs/built-in.o: In function `configfs_init': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/configfs/mount.c:143: undefined reference to `kernel_subsys' make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-07Clean up E7520/7320/7525 quirk printk.Dave Jones
The printk level in this printk is bogus, as the previous printk didn't have a terminating \n resulting in .. Intel E7520/7320/7525 detected.<6>Disabling irq balancing and affinity It also never printed a \n at all in the case where we didn't do the quirk. Change it to only make noise if it actually does something useful. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-07include/linux/kallsyms.h must #include <linux/errno.h>Adrian Bunk
This patch fixes the following 2.6.22 regression with CONFIG_KALLSYMS=n: <-- snip --> ... CC arch/m32r/kernel/traps.o In file included from /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/arch/m32r/kernel/traps.c:14: /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h: In function 'lookup_symbol_name': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: 'ERANGE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h: In function 'lookup_symbol_attrs': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:71: error: 'ERANGE' undeclared (first use in this function) make[2]: *** [arch/m32r/kernel/traps.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-07Fix use-after-free oops in Bluetooth HID.David Woodhouse
When cleaning up HIDP sessions, we currently close the ACL connection before deregistering the input device. Closing the ACL connection schedules a workqueue to remove the associated objects from sysfs, but the input device still refers to them -- and if the workqueue happens to run before the input device removal, the kernel will oops when trying to look up PHYSDEVPATH for the removed input device. Fix this by deregistering the input device before closing the connections. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06slub: remove useless EXPORT_SYMBOLChristoph Lameter
kmem_cache_open is static. EXPORT_SYMBOL was leftover from some earlier time period where kmem_cache_open was usable outside of slub. (Fixes powerpc build error) Signed-off-by: Chrsitoph Lameter <clameter@sgi.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06MAINTAINERS new kernel janitors mlmaximilian attems
davem kindly moved the list from osdl to vger. Signed-of-by: maximilian attems <max@stro.at> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06GEODE: reboot fixup for geode machines with CS5536 boardsAndres Salomon
Writing to MSR 0x51400017 forces a hard reset on CS5536-based machines, this has the reboot fixup do just that if such a board is detected. Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETPOLL]: Fixups for 'fix soft lockup when removing module' [NET]: net/core/netevent.c should #include <net/netevent.h> [NETFILTER]: nf_conntrack_h323: add checking of out-of-range on choices' index values [NET] skbuff: remove export of static symbol SCTP: Add scope_id validation for link-local binds SCTP: Check to make sure file is valid before setting timeout SCTP: Fix thinko in sctp_copy_laddrs()
2007-07-06Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix scheduling latency issue on 24K, 34K and 74K cores [MIPS] Add macros to encode processor revisions. [MIPS] RM7000: Enable ICACHE_REFILLS_WORKAROUND_WAR. [MIPS] SMTC: Fix cut'n'paste bug in Kconfig.debug [MIPS] Change libgcc-style functions from lib-y to obj-y [MIPS] Fix timer/performance interrupt detection [MIPS] AP/SP: Avoid triggering the 34K E125 performance issue [MIPS] 64-bit TO_PHYS_MASK macro for RM9000 processors
2007-07-06mm: fixup /proc/vmstat outputPeter Zijlstra
Line up the vmstat_text with zone_stat_item enum zone_stat_item { /* First 128 byte cacheline (assuming 64 bit words) */ NR_FREE_PAGES, NR_INACTIVE, NR_ACTIVE, We current have nr_active and nr_inactive reversed. [ "OK with patch, though using initializers canbe handy to prevent such things in future: static const char * const vmstat_text[] = { [NR_FREE_PAGES] = "nr_free_pages", ..." - Alexey ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06potential compiler error, irqfunc caller sites updateYoann Padioleau
In 7d12e780e003f93433d49ce78cfedf4b4c52adc5 David Howells performed this evolution: "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers" He correctly updated many of the function definitions that were using this extra regs pointer parameter but forgot to update some caller sites of those functions. The reason the modifications was not properly done on all drivers is that some drivers were rarely compiled because they are for AMIGA, or that some code sites were inside #ifdefs where the option is not set or inside #if 0. Here is the semantic patch that found the occurences and fixed the problem. @ rule1 @ identifier fn; identifier irq, dev_id; typedef irqreturn_t; @@ static irqreturn_t fn(int irq, void *dev_id) { ... } @@ identifier rule1.fn; expression E1, E2, E3; @@ fn(E1, E2 - ,E3 ) Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06i386: es7000 build breakage fixVivek Goyal
o Commit 1833d6bc72893265f22addd79cf52e6987496e0f broke the build if compiled with CONFIG_ES7000=y and CONFIG_X86_GENERICARCH=n arch/i386/kernel/built-in.o(.init.text+0x4fa9): In function `acpi_parse_madt': : undefined reference to `acpi_madt_oem_check' arch/i386/kernel/built-in.o(.init.text+0x7406): In function `smp_read_mpc': : undefined reference to `mps_oem_check' arch/i386/kernel/built-in.o(.init.text+0x8990): In function `connect_bsp_APIC': : undefined reference to `enable_apic_mode' make: *** [.tmp_vmlinux1] Error 1 o Fix the build issue. Provided the definitions of missing functions. o Don't have ES7000 machine. Only compile tested. Cc: Len Brown <lenb@kernel.org> Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06PNP SMCf010 quirk: work around Toshiba Portege 4000 ACPI issuesBjorn Helgaas
When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims the device is working, but it really isn't configured correctly. The BIOS *will* configure it, but only if we call _SRS after (1) reversing the order of the SIR and FIR I/O port regions and (2) changing the IRQ from active-high to active-low. This patch addresses the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" I tested this on a Portege 4000. The smsc-ircc2 driver correctly detects the device, and "irattach irda0 -s && irdadump" shows transmitted and received packets. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06fix logic error in ipc compat semctl()Alexander Graf
When calling a semctl(IPC_STAT) without IPC_64 the check if the memory is unevaluated. This patch fixes this. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06x86_64: fix headers_installDavid Woodhouse
A bug in headers_install for ARCH=x86_64 yields an asm/ directory full of files all of which are using the same #ifdef guard, "__ASM_STUB_" with no postfix. So the second and later asm files #included in the same C file (often through standard headers like ioctl.h) yields no symbols. Strangeness with the Ubuntu 'tell me if I support something that's not explcitly mentioned in POSIX, and I'll strip it out' shell, I believe. We don't need the 'export' but we do need a semicolon at the end of the FNAME line: Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06MTRR: Fix race causing set_mtrr to go into infinite loopLoic Prylli
Processors synchronization in set_mtrr requires the .gate field to be set after .count field is properly initialized. Without an explicit barrier, the compiler was reordering those memory stores. That was sometimes causing a processor (in ipi_handler) to see the .gate change and decrement .count before the latter is set by set_mtrr() (which then hangs in a infinite loop with irqs disabled). Signed-off-by: Loic Prylli <loic@myri.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06i386: fix regression, endless loop in ptrace singlestep over an int80Jason Wessel
The commit 635cf99a80f4ebee59d70eb64bb85ce829e4591f introduced a regression. Executing a ptrace single step after certain int80 accesses will infinitely loop and never advance the PC. The TIF_SINGLESTEP check should be done on the return from the syscall and not before it. I loops on each single step on the pop right after the int80 which writes out to the console. At that point you can issue as many single steps as you want and it will not advance any further. The test case is below: /* Test whether singlestep through an int80 syscall works. */ #define _GNU_SOURCE #include <stdio.h> #include <unistd.h> #include <fcntl.h> #include <sys/ptrace.h> #include <sys/wait.h> #include <sys/mman.h> #include <asm/user.h> #include <string.h> static int child, status; static struct user_regs_struct regs; static void do_child() { char str[80] = "child: int80 test\n"; ptrace(PTRACE_TRACEME, 0, 0, 0); kill(getpid(), SIGUSR1); write(fileno(stdout),str,strlen(str)); asm ("int $0x80" : : "a" (20)); /* getpid */ } static void do_parent() { unsigned long eip, expected = 0; again: waitpid(child, &status, 0); if (WIFEXITED(status) || WIFSIGNALED(status)) return; if (WIFSTOPPED(status)) { ptrace(PTRACE_GETREGS, child, 0, &regs); eip = regs.eip; if (expected) fprintf(stderr, "child stop @ %08lx, expected %08lx %s\n", eip, expected, eip == expected ? "" : " <== ERROR"); if (*(unsigned short *)eip == 0x80cd) { fprintf(stderr, "int 0x80 at %08x\n", (unsigned int)eip); expected = eip + 2; } else expected = 0; ptrace(PTRACE_SINGLESTEP, child, NULL, NULL); } goto again; } int main(int argc, char * const argv[]) { child = fork(); if (child) do_parent(); else do_child(); return 0; } Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: <stable@kernel.org> Cc: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-06Fix elf_core_dump() when writing arch specific notes (spu coredumps)Michael Ellerman
elf_core_dump() supports dumping arch specific ELF notes, via the #define ELF_CORE_WRITE_EXTRA_NOTES. Currently the only user of this is the powerpc spu coredump code. There is a bug in the handling of foffset WRT the arch notes, which causes us to erroneously increment foffset by the size of the arch notes, leaving a block of zeroes in the file, and causing all subsequent data in the file to be at <supposed position> + <arch note size>. eg: LOAD 0x050000 0x00100000 0x00000000 0x20000 0x20000 R E 0x10000 Tells us we should have a chunk of data at 0x50000. The truth is the data is at 0x90dbc = 0x50000 + 0x40dbc (the size of the arch notes). This bug prevents gdb from reading the core file correctly. The simplest fix is to simply remember the size of the arch notes, and add it to foffset after we've written the arch notes. The only drawback is that if the arch code doesn't write as many bytes as it said it would, we end up with a broken core dump again. For now I think that's a reasonable requirement. Tested on a Cell blade, gdb no longer complains about the core file being bogus. While I'm here I should point out that the spu coredump code does not work if we're dumping to a pipe - we'll have to wait for 23 to fix that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 15:54:54 +0000