aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-11-19fix-glamofb-remove-soft-delays.patchAndy Green
The delay versions of the access to registers were based on a misunderstanding of the Glamo docs: it can force nWAIT differently depending on the access type. Therefore we don't need to take special care about delays on CPU side. Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19clean-glamofb-cruft.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19fix-reote-install-for-ext3-only-sd.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19fix-touchscreen-driver-gta01-missing-includes.patchMike Westerhof
Add missing initialization for the touchscreen driver for the gta01 platform. Signed-off-by: Mike Westerhof <mwester@dls.net>
2008-11-19test-touchscreen-median.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19introduce-gta02-pm-wlan.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19tracking-2.6.28-timer-blowup.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19tracking-2.6.28-add-codec_dev-to-gta02-soc-mach-stuff.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19GTA02: Improve NAND timingsHarald Welte
Rather than using conservative default timings for the NAND flash, use the timings as specified in the S3C2442B MCP data sheet. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-11-19tracking-2.6.28-breakage-after-change-to-64xx-tree.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19tracking-2.6.28-device_create_drvdata-gone.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19tracking-2.6.28-bcd-functions-changed.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19config-tracking-2.6.28-up.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19[Resend] Fix trivial warningNelson Castillo
By adding missing #include <linux/module.h> we fix 6 warnings that we care about (in our patchset). Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
2008-11-19Fixing trivial warningsNelson Castillo
Removed unused variable. Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
2008-11-19Fixing trivial warningsNelson Castillo
The function glamo_mci_reset is not being used. Let's comment it out. Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
2008-11-19Add missing function definitionsJonas Bonn
These functions are undefined at first use which causes the build to fail. Just push the definitions forward, for now. This file needs to be cleaned up a good bit, in general, so we'll put in a better fix at that time. For now, this builds, at least... Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Carry over changes to spi-gpio.hJonas Bonn
This patch carries over the OpenMoko modifications at include/asm-arm/arch-s3c2410/spi-gpio.h to arch/arm/mach-s3c2410/include/mach/spi-gpio.h Note: board_size and board_info have been removed upstream, but as we still rely on them we'll just put them back for now. These will need to be removed (and the corresponding driver changes made, of course) before this can go upstream. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Carry over changes from asm/arch/regs-sdi.hJonas Bonn
This pulls the Moko changes to regs-sdi.h that were in include/asm-arm/arch-s3c2410 over to the file at arch/arm/../mach and deletes the file at include/asm-arm. Note: we have been using a mix of regs-sdi.h from the two different locations. The unification of these two files may have some unknown consequences... keep your eyes open for oddities after applying this. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Delete include/asm-arm/arch-s3c2410/regs-dsc.h.Jonas Bonn
This file already exists at arch/arm/mach-s3c2410/include/mach (where it needs to be) and there are no OpenMoko changes to be carried over. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/irqs.h to mach/irqs.hJonas Bonn
This "move" is not so much a file move as just carrying over the current status of the irqs.h file from include/asm-arm/arch-s3c2410 to the file at arch/arm/mach-s3c2410/include/mach. For some reason both files existed and had become out of sync. NOTE: Some of these changes look fishy... please check these properly. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/fiq_ipc_gta02.h to mach/fiq_ipc_gta02.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/gta02.h to mach/gta02.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/s3c24xx-serial.h to mach/s3c24xx-serial.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/ts.h to mach/ts.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/neo1973-pm-gsm.h to mach/neo1973-pm-gsm.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/mci.h to mach/mci.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/pwm.h to mach/pwm.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Re: [PATCH]: Cleanup of leds-neo1973Nelson Castillo
Remove unneeded spaces and coding style fixes. Purely cosmetic.
2008-11-19config-stable-tracking-remove-cs89xx.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19fix-stable-tracking-build-without-symlink.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19Cosmetic: Fix path in help stringJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19[ARM]: Move asm/arch/gpio.h to mach/ directoryJonas Bonn
This file was moved in the big file move, but some OpenMoko specific changes did not make it. This patch peels out the relevant bits and adds them to the gpio.h file in the upstream location. The only OpenMoko specific change is the definition of gpio_to_irq and irq_to_gpio. These functions should really be defined in gpio_chip and asm-generic/gpio.h; this is coming soon, but until then we'll just use the Moko definitions that we've been using up until now. This is not strictly correct for the GTA02 case, but it works given the configuration that's currently in use. This can be fixed (and should become evident) when the configuration options are cleaned up. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19[ARM]: Move asm/arch/gta01.h to include/machJonas Bonn
This file is OpenMoko specific and didn't get moved in the big file move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs and fix the references to it. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19[ARM]: Build fix after file moveJonas Bonn
After the big include file move these paths ended up incorrect. Fix these so that this builds cleanly again. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Config: Ifdef cleanupsJonas Bonn
This patch removes a large number of #ifdefs that switch on machine model. Where applicable, the machine_is_* idiom is favoured; this mainly makes the code easier to read, but it does have some other advantages, too. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19fix-build-without-gta01-enabled.patchAndy Green
Problems building with GTA01 disabled in config come down to not selecting the common CONFIG for GTAXX with GTA02, and GTA01-specific gps stuff. Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19config-remove-GTA01-build-from-2.6.27-defconfig.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19suppress "onkey" events on resume [Was: Re: Where are actions configured for ↵\\\\\\\\\\\\\\\"Mike (mwester)\\\\\\\\\\\\
buttons in FSO?] Michael 'Mickey' Lauer wrote: ... > The problem is (and this is the reason why I'm crossposting this to the > kernel mailing list), the kernel is not swallowing the power button > presses that triggers the resume, so you need some "real" programming > (as opposed to the expressional complexity of our rules) in order to > prevent falling asleep right after resume. > > Kernel-guys, can we change that? suppress-resume-onkey-event.patch This suppresses the key press and key release events from the power button, in the case where the power button is the wake event for the GTA01 or GTA02 device. Signed-off-by: Mike Westerhof <mwester@dls.net>
2008-11-19clean-move-defconfigs-stable-tracking.patchAndy Green
Delete old configs in stable-tracking, move defconfig-2.6.27 to the common config site arch/arm/configs/gta02-moredrivers-defconfig Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19fix-bt-cycle-power-around-regulator-voltage-change.patchSean McNeil
Don't change bt regulator at all if already at requested state, and turn it to opposite on | off state before changing regulator voltage and setting final state. Signed-off-by: Sean McNeil <sean@mcneil.com>
2008-11-19fix-wrongful-led-trigger-removal.patchSean McNeil
LED trigger gets removed in led_brightness_store??? Signed-off-by: Sean McNeil <sean@mcneil.com>
2008-11-19fix-lis302dl-issues.patchSean McNeil
Move to level from edge, fix local_save... to local_irq... simplify bitbang sequence Signed-off-by: Sean McNeil <sean@mcneil.com>
2008-11-19clean-leds-remove-pwm-stuff.patchSean McNeil
Remove unsued PWM stuff around LEDs. Signed-off-by: Sean McNeil <sean@mcneil.com>
2008-11-19add-powersupply-ac-usb-automonitor.patchSean McNeil
Adds AC and USB powersupply objects, and a workqueue to automonitor changes in battery state and fire change events on any change to selected registers. Signed-off-by: Sean McNeil <sean@mcneil.com>
2008-11-19add-neo1973kbd-jack-state-sys.patchSean McNeil
Add /sys files for jack state reporting. Signed-off-by: Sean McNeil <sean@mcneil.com>
2008-11-19glamo_fb: Implement screen blankingHarald Welte
This patch implements fb_blank() for the glamo-fb driver, which switches off the pixel clock (DCLK) for power saving. We currently delay the actual pixel clock switch until we enter FB_BLANK_POWERDOWN, since the backlight fade is slow and we don't want the user to see artefacts on the screen while the backlight is fading out. So since the X server first sends FB_BLANK_{V,H}SYNC_SUSPEND, we start the backlight fade here, and only once we get FB_BLANK_POWERDOWN the pixel clock is disabled. There are no measurements yet, but the power savings should be double, since there is no longer any generation of the high-frequency LCM signals, and there are no video-related SDRAM accesses anymore. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-11-19glamo_fb: sync comment with codeHarald Welte
the comment claims that DHCLK is enabled, while the code actually disables it. No code change, purely cosmetic patch. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-11-19glamo_fb: Cosmetic cleanupHarald Welte
Remove dead code and coding style fixes. Purely cosmetic. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-11-19re-enable-fiq.patchAndy Green
FIQ is back up again, changed the stack to point to the post FIQ-vector area, remove various meddlings needed to try to fix it. Signed-off-by: Andy Green <andy@openmoko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-31 23:10:46 +0000