aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-07ARM: S3C2443: Further clksrc-clk conversionsBen Dooks
Move more of the core clocks that where left over from the last commit as they are much more core to the system operation. This should allow for easier tracking of any problems. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07ARM: S3C2443: Change to using plat-samsung clksrc-clk implementationBen Dooks
The S3C2443 clock code could easily make use of the clksrc implementation in plat-samsung for many of the clocks. Make the clocks that easily move to clksrc-clk over, update any initialisation and remove the old register definitions from the header file (it is only being used once). Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-30ARM: S3C2443: Use common clock gate codeBen Dooks
Add common clock gate code for each of the S3C2443 clock gate code. Whether to move this elsewhere will be decided later. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-29ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.Atul Dahiya
Currently, S5P_TIMER_IRQ is based at the end of VICs. This patch changes the S5P_TIMER_IRQ base from end of VICs to 11 in ISA IRQ space. No of VICs varies between SOCs. This causes an exception on S5P6442. Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-27ARM: S5P6440: Move common memory map definitions for S5PKukjin Kim
1. Moved common memory map definitions for S5P such as S5P_VA_XXX into plat-s5p/include/mach/map-s5p.h from mach-s5p6440/include/mach. 2. Removed unnecessary definitions in the map.h and irq.c 3. Removed the unnecessary support for unaligned UART address 4. Renamed S5P_VA_VICx definitions as VA_VICx 5. Moved the definitons of VIC_BASE to plat-s5p/include/plat/irqs.h Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-27ARM: S5P6440: Move CPU specific code in plat-s5p to machine directoryKukjin Kim
The s5p6440-clock.c and s5p6440-init.c code in the plat-s5p is specific to s5p6440 SoC based systems. So these files are being moved to the machine directory of s5p6440. And these files are renamed in the machine directory. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26ARM: Merge next-smdk6410-defconfigBen Dooks
Merge branch 'next-smdk6410-defconfig' into next-samsung
2010-01-26ARM: SAMSUNG: Add error printing to s3c24xx_register_clocksBen Dooks
Add an error print to s3c24xx_register_clocks to provide more useful information when failing to register the clock. I belive this was originally left out due to the possibility of a problem with low-level debugging code. However, if the low-level debug code is not functional by now there will be a whole other set of problems being presented to the system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26ARM: SAMSUNG: Add documentation to the clock registration calls.Ben Dooks
Add some kerneldoc documentation to the s3c24xx_register_clock and the s3c24xx_register_clocks() call. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26ARM: SAMSUNG: Fix bad use of __initdata for s3c_register_clocks()Ben Dooks
Functions should be marked __init, not __initdata. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26ARM: SAMSUNG: Fix null pointer dereference in ADC driverMaurus Cuelenaere
ARM: SAMSUNG: Fix null pointer dereference in ADC driver Use struct adc_device instead of relying on client (which could be NULL) when checking for SoC type. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26ARM: S5PV210: Add serial port supportThomas Abraham
This patch adds UART serial port support for S5PV210. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: S5P6440: Add HSMMC and OTG base addresses to map.hBen Dooks
Add the HSOTG and HSMMC block addresses to the map.h file. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: S3C64XX: Update s3c6400_defconfig for current kernelBen Dooks
Update the s3c6400_defconfig with one from the current kernel which has been build and run tested on an SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: S3C6400: Update s3c6400_defconfig for bigger initrds for SMDK6410Ben Dooks
The Samsung initrd for SMDK6410 is now bigger than the original initrds that where used. Increase the command-line size and the size of the ramdisk that it is unpacked into. Also change the default init to /linuxrc to avoid problems with the current SMDK ramdisk image failing to run /bin/bash. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: S3C64XX: Tidy up common code in s3c64xx_spi_set_info()Ben Dooks
The s3c64xx_spi_set_info() sets one of two platform data structures depending on which controller is being specified. Change to taking a pointer to the relevant platform data structure and then having one set of code to place the data into the area being pointed to. Cc: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: S3C64XX: Fix typo in s3c-hsotg platform dataMaurus Cuelenaere
ARM: S3C64XX: Fix typo in s3c-hsotg platform data Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: SAMSUNG: Staticise gpiolib implementation functionsMark Brown
They are not exported, they are referenced via vtables. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: S3C64XX: Staticise audio platform dataMark Brown
It's not exported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: S3C64XX: Fix dev-audio buildMark Brown
As reported when the patch was posted commit 71269364 ("ARM: S3C64XX: Add I2S resources in platform code") uses pin names for the IISv4 data output pins which are not present in mainline, causing dev-audio to fail to build. Fix this by using the defines which are actually present in the kernel source. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: SMDK6410: Set up interrupt range for WM835x on 1190-EV1 PMIC boardMark Brown
The WM835x driver won't actually use this yet but it will in the future when the changes converting it to genirq are merged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: SAMSUNG: Move pm-check.c to plat-samsungBen Dooks
Move the pm-check.c file to plat-samsung for all Samsung SoC users, and update Kconfig names to make them SAMSUNG_ instead of S3C2410_ Sed expresions used to make the change: s/S3C2410_PM_DEBUG/SAMSUNG_PM_DEBUG/g s/S3C2410_PM_CHECK/SAMSUNG_PM_CHECK/g Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: SAMSUNG: Move pmw.c to plat-samsungBen Dooks
Move the PWM driver support to plat-samsung, as these PWM blocks are close enough across the current range to be supported by this driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: SAMSUNG: Move more support into plat-samsungBen Dooks
Move header files which are not likely to be touched in any further support addition out of plat-s3c's include directory into plat-samsung. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: Merge next-samsung-s5p6440-iodecBen Dooks
Merge branch 'next-samsung-s5p6440-iodec' into next-samsung-try10
2010-01-19ARM: SAMSUNG: Add initial documentation directory and overviewBen Dooks
Start Documentation/arm/Samsung and add an initial overview file which whilst is not complete, is better than nothing. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: S5P6440: Add IO descriptor for ChipID block.Kukjin Kim
This patch adds the IO descriptor for ChipID block in S5P6440. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Remove empty gpio-core.h and use central plat/gpio-core.hBen Dooks
Rename mach-s3c2410/include/mach/gpio-core.h to mach/gpio-track.h so that it can be included by <plat/gpio-core.h> when needed. Eliminate all other empty gpio-core.h files and just include the <plat/gpio-core.h> as necessary. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Move GPIO headers to plat-samsungBen Dooks
Move the GPIO and GPIO configuration headers into arch/arm/plat-samsung as they are common to all the Samsung SoCs. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Move gpiolib support in gpio.c to plat-samsungBen Dooks
Move the gpio.c code containing the core gpiolib and GPIO support to plat-samsung from plat-s3c as it is used by all current Samsung SoCs. Note, we didn't move this to gpiolib.c as it contains code that is not strictly for gpiolib support and the 4bit code is already called gpiolib.c so make the change easier by not renaming both files in one go. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Move pm-gpio into plat-samsungBen Dooks
Move the pm-gpio code into plat-samsung. Note, this should be changed later to properly compile the 4bit code if the 4bit settings are enabled. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: S5P6440: Add S5P6440 GPIO supportKukjin Kim
This patch adds Samsung's S5P6440 GPIO support. Signed-off-by: Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Move GPIO common functions to plat-samsungKukjin Kim
This patch moves GPIO common functions (from plat-s3c64xx) into plat-samsung. and adds the config option to build the plat-samsung/gpiolib for Samsung SoCs. Signed-off-by: Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: Merge next-samsung-serial1Ben Dooks
Merge branch 'next-samsung-serial1' into next-samsung-try7
2010-01-19ARM: Merge next-samsung-clock2Ben Dooks
Merge branch 'next-samsung-clock2' into next-samsung-try7
2010-01-19ARM: Merge next-samsung-devupdates1Ben Dooks
Merge branch 'next-samsung-devupdates1' into next-samsung-try7
2010-01-19ARM: Merge next-jassi-spiBen Dooks
Merge branch 'next-jassi-spi' into next-samsung-try7
2010-01-19ARM: SAMSUNG: serial: Modify console initialization.Thomas Abraham
This patch modifies s3c24xx_serial_initconsole function to accept multiple platform UART information structures. This is required on platforms that have differences among the instances of UART ports. As an example, the FIFO sizes could be different for each UART instance and hence multiple platform UART information structures would be needed. This patch also modifies the s3c24xx_console_init macro since it wraps the call to the s3c24xx_serial_initconsole function. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: Merge next-samsung-clock2Ben Dooks
Merge branch 'next-samsung-clock2' into next-samsung-try5
2010-01-19ARM: Merge next-samsung-devupdates1Ben Dooks
Merge branch 'next-samsung-devupdates1' into next-samsung-try5
2010-01-19ARM: Merge next-jassi-spiBen Dooks
Merge branch 'next-jassi-spi' into next-samsung-try5
2010-01-19ARM: Merge next-s3c6410-andygreenBen Dooks
Merge branch 'next-s3c6410-andygreen' into next-samsung-try5
2010-01-19ARM: Merge next-samsung-mc-adcBen Dooks
Merge branch 'next-samsung-mc-adc' into next-samsung-try5 Conflicts: arch/arm/mach-s3c6400/include/mach/map.h (fix ADC and RTC merge)
2010-01-19ARM: S3C24XX: Add mci platform data set call s3c24xx_mci_set_platdata().Ben Dooks
Add a s3c24xx_mci_set_platdata() call for all the machine files that have platform data for the MCI driver. This brings the MCI device into line with the other devices with __initdata and a specific call to ensure the right structure type is being passed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: MINI2440: Remove commented out devices from device arrayBen Dooks
There's no point in having these in until there is proper support for them, so remove as they only confuse the device changing script. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Add platform data registration for OHCIBen Dooks
Add a platform data helper for the OHCI device Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Make UART device code commonBen Dooks
Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a common entry in plat-samsung since they are the same in all the current implementations. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18ARM: S3C64XX: SPI: Define SPI controller devicesJassi Brar
Platform devices for SPI Controller of S3C64XX are defined and exported for machines to include. Also, controller setup helper functions are defined for machine code to set runtime configuration of the controller and the bus. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18ARM: S3C64XX: SPI: Header for passing platform dataJassi Brar
We need a way to pass controller specific information to the SPI driver. For that purpose new headers are made. SPI Controller is assumed 'type-s3c64xx' and can be defined for newer SoCs. Hence, that part is placed under plat-samsung to be shared across newer SoCs. SoC specific part - spi source clocks, will be placed under plat-<soc>/include/plat/ Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18ARM: S3C64XX: SPI: Define SPI-48M clock sourcesJassi Brar
Defined special 48MHz clock sources for SPI-0,1. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 21:54:53 +0000