aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-10eHEA: Capability flag for DLPAR supportJan-Bernd Themann
This patch introduces a capability flag that is used by the DLPAR userspace tool to check which DLPAR features are supported by the eHEA driver. Missing goto has been included. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Remove sk98lin ethernet driver.Jeff Garzik
Unmaintained, superceded by skge. Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sunhme.c:quattro_pci_find() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10bonding / ipv6: no addrconf for slaves separately from masterJay Vosburgh
At present, when a device is enslaved to bonding, if ipv6 is active then addrconf will be initated on the slave (because it is closed then opened during the enslavement processing). This causes DAD and RS packets to be sent from the slave. These packets in turn can confuse switches that perform ipv6 snooping, causing them to incorrectly update their forwarding tables (if, e.g., the slave being added is an inactve backup that won't be used right away) and direct traffic away from the active slave to a backup slave (where the incoming packets will be dropped). This patch alters the behavior so that addrconf will only run on the master device itself. I believe this is logically correct, as it prevents slaves from having an IPv6 identity independent from the master. This is consistent with the IPv4 behavior for bonding. This is accomplished by (a) having bonding set IFF_SLAVE sooner in the enslavement processing than currently occurs (before open, not after), and (b) having ipv6 addrconf ignore UP and CHANGE events on slave devices. The eql driver also uses the IFF_SLAVE flag. I inspected eql, and I believe this change is reasonable for its usage of IFF_SLAVE, but I did not test it. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10atl1: remove write-only var in tx handlerAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10macmace: use "unsigned long flags;"Alexey Dobriyan
Code will do local_irq_save() on it. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Cleanup usbnet_probe() return value handlingPeter Korsgaard
usbnet_probe() handles a positive return value from the driver bind() function as success, but will later only setup the status handler if the return value was zero, leading to confusion. Patch adjusts this to accept positive values as success in both checks. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10netxen: deinline and sparse fixStephen Hemminger
Get rid of dubious casts to (void *) which causes a sparse warning. And move largeish function from inline to the one file that uses the code, the compiler can then decide to inline it. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10eeprom_93cx6: shorten pulse timing to match spec (bis)Francois Romieu
Based on an original idea by John W. Linville. It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: Add Marvell 88E1112 phy idOlof Johansson
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the 88E1111 inits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: cleanup marvell.c a bitOlof Johansson
Simplify the marvell driver init a bit: Make the supported devices an array instead of explicitly registering each structure. This makes it considerably easier to add new devices down the road. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10AX88796 network driverBen Dooks
Support for the Asix AX88796 network controller, an NE2000 compatible 10/100 ethernet device with internal PHY. The driver supports PHY settings via either ioctl() or the ethtool driver ops. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10IOC3: Switch to pci refcounting safe APIsAlan Cox
Convert the IOC3 driver to use ref counting pci interfaces so that we can obsolete the (usually unsafe) pci_find_{slot/device} interfaces and avoid future authors writing hotplug-unsafe device drivers. Signed-off-by: Alan Cox <alan@redhat.com> Build fixes: Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10e100: Fix Tyan motherboard e100 not receiving IPMI commandsDavid Graham
The 82550 & 51 parts have an extended configuration block that includes a bit "GMRC", required to enable the expected TCO behavior, in config byte offset 22d. The config block sent by the failing driver does include the extension area, but this bit is not initialised, and the downlaod only specifies 0x16 bytes to be sent to the NIC (thaht's bytes 00..21d). By initializing the GMRC bit, and extending the download size for D102+ MACs, the problem is resolved. Signed-off-by: David Graham <david.graham@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10QE Ethernet driver writes to wrong register to mask interruptsTimur Tabi
The QE Ethernet driver was writing to the wrong register to mask interrupts. In ucc_geth_stop(), it was clearing UCCE instead of UCCM. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10rrunner.c:rr_init() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x26e3f2): Section mismatch: reference to .init.text:rr_init (between 'rr_init_one' and 'rr_remove_one') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10tokenring/3c359.c:xl_init() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x361ef1): Section mismatch: reference to .init.text:xl_init (between 'xl_probe' and 'xl_hw_reset') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sis900_mii_probe() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x298170): Section mismatch: reference to .init.text:sis900_mii_probe (between 'sis900_probe' and 'sis900_default_phy') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Fix typo in drivers/net/s2io.cRolf Eike Beer
Introduced in d796fdb708fc5b10112934cba43e832c36ce4923. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10PCMCIA: add Socket Ethernet card into pcnet_csMarcin Juszkiewicz
One card submitted by Ångström user. Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10spidernet: improve interrupt handlingIshizaki Kou
We intend this patch to improve spidernet interrupt handling to be more strict. We had following problem and this patch solves it. -when CONFIG_DEBUG_SHIRQ=y, request_irq() calls handler(). -when spider_net_open() is called, it calls request_irq() which calls spider_net_interrupt(). -if some specific interrupt bit is set at this timing, it calls netif_rx_schedule() and spider_net_poll() is scheduled. -spider_net_open() calls netif_poll_enable() which clears the bit __LINK_STATE_RX_SCHED. -when spider_net_poll() is called, it calls netif_rx_complete() which causes BUG_ON() because __LINK_STATE_RX_SCHED is not set. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-103cSOHO100-TX needs EXTRA_PREAMBLESteffen Klassert
The 3cSOHO100-TX needs a mdio_sync() before mdio_read() to read the MII transceiver registers properly. Adding EXTRA_PREAMBLE to drv_flags of the 3cSOHO100-TX will force this. This problem exists already for years (I checked back to 2.6.8). Setting duplex for the 3cSOHO100-TX was more or less a random process. Till 2.6.15 it was more likely that the diver ends up in half duplex mode, after the code change in 2.6.16 it was more likely to end up in full duplex mode. I wonder why nobody noticed this earier. Hopefully addresses Bug 7454 3c59x (3cSOHO100-TX Hurricane) slow network bug http://bugzilla.kernel.org/show_bug.cgi?id=7454 and Bug 3654 3cSOHO100-TX: No MII transceiver present http://bugzilla.kernel.org/show_bug.cgi?id=3654 Cc: Jonas Sandberg <jonassa@gmail.com> Cc: Jon Sanchez <bugs@niluje.net> Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Use is_power_of_2() in myri10ge/myri10ge.cvignesh babu
Replace (n & (n-1)) with is_power_of_2() Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Cc: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10use is_power_of_2() in cxgb3/cxgb3_main.cvignesh babu
Replace (n & (n-1)) with is_power_of_2() Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10atari_pamsnet.c: old declaration ritchie style fixYoann Padioleau
Use consistent function declaration style. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: 1.16 versionStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: remove some leftover debug messagesStephen Hemminger
Eliminate extra debug messages Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: use upper_32_bits() macroStephen Hemminger
Use upper_32_bits() inline Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: use roundup() macroStephen Hemminger
Use roundup() macro to size receive buffer. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: check drop truncated packetsStephen Hemminger
If packet larger than MTU is received, the driver uses hardware to truncate the packet. Use the status registers to catch/drop them. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: add support for read/write of EEPROMStephen Hemminger
Add get/set eeprom support for sky2. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: unmark as EXPERIMENTALStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: receive fillStephen Hemminger
Simplify receive buffer refill logic. Rather than trying to update incrementally; do receive ring refill at end of receive processing. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: check for more work before leaving NAPIStephen Hemminger
This patch avoids generating another IRQ if more packets arrive while in the NAPI poll routine. Before marking device as finished, it rechecks that the status ring is empty. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: debug interfaceStephen Hemminger
Add an optional debug interface for displaying state of transmit/receive rings. Creates a file debugfs/sky2/ethX for each device that is up. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: carrier managementStephen Hemminger
Make sky2 handle carrier similar to other drivers, eliminate some possible races in carrier state transistions. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: restore workarounds for lost interruptsStephen Hemminger
This patch restores a couple of workarounds from 2.6.16: * restart transmit moderation timer in case it expires during IRQ routine * default to having 10 HZ watchdog timer. At this point it more important not to hang than to worry about the power cost. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (31 commits) firewire: fw-sbp2: fix DMA mapping of management ORBs firewire: fw-sbp2: fix DMA mapping of command ORBs firewire: fw-sbp2: fix DMA mapping of S/G tables firewire: fw-sbp2: add a boundary check firewire: fw-sbp2: correctly align page tables firewire: fw-sbp2: memset wants string.h firewire: fw-sbp2: use correct speed in sbp2_agent_reset firewire: fw-sbp2: correctly dereference by container_of firewire: Document userspace ioctl interface. firewire: fw-sbp2: implement nonexclusive login firewire: fw-sbp2: let SCSI shutdown commands through before logout firewire: fw-sbp2: implement max sectors limit for some old bridges firewire: simplify a struct type firewire: support S100B...S400B and link slower than PHY firewire: optimize gap count with 1394b leaf nodes firewire: remove unused macro firewire: missing newline in printk firewire: fw-sbp2: remove unused struct member ieee1394: remove old isochronous ABI ieee1394: sbp2: change some module parameters from int to bool ...
2007-07-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: handle cases of volume knobs generating relative values HID: Logitech keyboard 0xc311 needs reset leds quirk HID: support for logitech cordless desktop LX500 special mapping HID: fix autocentering of PID devices HID: separate quirks for report descriptor fixup HID: Add NOGET quirk for all NCR devices HID: support for Petalynx Maxter remote control HID: fix mismatch between hid-input HUT find/search mapping and the HUT HID: support for Gameron dual psx adaptor USB HID: avoid flush_scheduled_work() HID: Use menuconfig objects HID: force hid-input for Microsoft SideWinder GameVoice device HID: input mapping for Chicony KU-0418 tactical pad HID: make debugging output runtime-configurable
2007-07-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (75 commits) Ethernet driver for EISA only SNI RM200/RM400 machines Extract chip specific code out of lasi_82596.c ehea: Whitespace cleanup pasemi_mac: Fix TX interrupt threshold spidernet: Replace literal with const r8169: perform RX config change after mac filtering r8169: mac address change support r8169: display some extra debug information during startup r8169: add endianess annotations to [RT]xDesc r8169: align the IP header when there is no DMA constraint r8169: add bit description for the TxPoll register r8169: cleanup r8169: remove the media option r8169: small 8101 comment r8169: confusion between hardware and IP header alignment r8169: merge with version 8.001.00 of Realtek's r8168 driver r8169: merge with version 6.001.00 of Realtek's r8169 driver r8169: prettify mac_version r8169: populate the hw_start handler for the 8110 r8169: populate the hw_start handler for the 8168 ...
2007-07-10firewire: fw-sbp2: fix DMA mapping of management ORBsStefan Richter
The CPU must not touch the buffer after it was DMA-mapped. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: fix DMA mapping of command ORBsStefan Richter
The CPU must not touch the buffer after it was DMA-mapped. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: fix DMA mapping of S/G tablesStefan Richter
- The CPU must not touch the buffer after it was DMA-mapped. - The size argument of dma_unmap_single(...page_table...) was bogus. - Move a comment closer to the code to which it refers to. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: add a boundary checkStefan Richter
Add rudimentary check for the case that the page table overflows due to merging of s/g elements by the IOMMU. This would have lead to overwriting of arbitrary memory. After this change I expect that an offending command will be unsuccessfully retried until the scsi_device is taken offline by SCSI core. It's a border case and not worth to implement a recovery strategy. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: correctly align page tablesStefan Richter
This is required per SBP-2 clause 5.2. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: memset wants string.hStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: use correct speed in sbp2_agent_resetStefan Richter
noticed by Jay Fenlason Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: fw-sbp2: correctly dereference by container_ofJay Fenlason
Replace a cast with a container_of(). As long as nobody reorders the structure elements, they do the same thing, but container_of() is more readable. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added complete_command_orb) Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10firewire: Document userspace ioctl interface.Kristian Høgsberg
The isochronous packet format is still not documented, but this is a good first step. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (format, wording)
2007-07-10firewire: fw-sbp2: implement nonexclusive loginStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 20:27:32 +0000