Age | Commit message (Collapse) | Author |
|
|
|
[ FIXME:
include/asm-arm/arch-s3c2410/irqs.h shouldn't contain device-specific
changes. ]
This is a Linux kernel driver for the Smedia Glamo336x / Glamo337x
multi-function peripheral device.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
Add the Samsung S3C2442B CPU idcode to the samsung s3c24xx platform code
and fix a Kconfig typo related tot the 2442.
|
|
This is a patch that seems to make the USB hangs on the S3C2440 go away. At
least a good amount of ping torture didn't make them come back so far.
The issue is that, if there are several back-to-back packets,
sometimes no interrupt is generated for one of them. This
seems to be caused by the mysterious dual packet mode, which
the USB hardware enters automatically if the endpoint size is
half that of the FIFO. (On the 2440, this is the normal
situation for bulk data endpoints.)
There is also a timing factor in this. I think what happens is
that the USB hardware automatically sends an acknowledgement
if there is only one packet in the FIFO (the FIFO has space
for two). If another packet arrives before the host has
retrieved and acknowledged the previous one, no interrupt is
generated for that second one.
However, there may be an indication. There is one undocumented
bit (none of the 244x manuals document it), OUT_CRS1_REG[1],
that seems to be set suspiciously often when this condition
occurs. There is also CLR_DATA_TOGGLE, OUT_CRS1_REG[7], which
may have a function related to this. (The Samsung manual is
rather terse on that, as usual.)
This needs to be examined further. For now, the patch seems to do the
trick.
Note that this is not a clean solution by any means, because we
might potentially get stuck in that interrupt for quite a while.
|
|
MTD: S3C24XX large page NAND support
This adds support for using large page NAND devices
with the S3C24XX NAND controller. This also adds the
file Documentation/arm/Samsung-S3C24XX/NAND.txt to
describe the differences.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
|
|
This is a MMC/SD driver for the Samsung S3C24xx SD/MMC controller, originally
developed years ago by Thomas Kleffel <tk@maintech.de>.
Due to time restraints, he had no time to further maintain the driver and
follow the mainline Linux changes in the SD/MMC stack.
With his authorization, I have taken over the task of making it compliant to
the current mainline SD/MMC API and take care of the mainline kernel merge.
After a potential kernel inclusion, we would co-maintain the driver.
Acked-by: Thomas Kleffel <tk@maintech.de>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
|
|
Use FIC's own USB Vendor ID rather than NetChip's
Yes, we could solve this by some modprobe.conf parameters, but I'd like to
rather not rely on this.
|
|
|
|
We need this stupid workaround since our amplifier chip uses a 'reserved' I2C
address
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
This is a backlight driver for the FIC/OpenMoko Neo1973 GTA01 GSM Phone
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This patch adds driver support for the vibator device of the FIC/OpenMoko
Neo1973 GSM phone. The driver uses the existing LED class driver framework,
since there's a lot of similarity between the LED and the vibrator function.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This patch adds a PWM api abstraction for the S3C2410 SoC
Signed-off-by: Javi Roman <javiroman@kernel-labs.org>
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
[PATCH] Neo1973 GPS / GSM / Bluetooth power control via sysfs
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This provides support for the GTA01 keyboard
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This driver adds support for the SPI-based control interface of the LCM (LCD
Panel) found on the FIC GTA01 hardware.
The specific panel in this hardware is a TPO TD028TTEC1, but the driver should
be able to drive any other diplay based on the JBT6K74-AS controller ASIC.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This patch adds support for the FIC Neo1973 GTA01 machine type to the ARM port
of the Linux kernel.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This is a NXP PCF50606 power management unit driver.
The PCF50606 is used in the FIC/OpenMoko Neo1973 GTA01 GSM phone.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
[PATCH] Add Kconfig option to enable NAND bad-block-table support for s3c2410
This patch adds a new CONFIG_MTD_NAND_S3C2410_BBT which, if enabled,
asks the mtd NAND core to use a bad-block table.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
The initialization of clocks uses mutexes, but we execute the resume in
an interrupt context. We therefore have to hand this task to a non-interrupt.
Adapted from a patch by Andy Green.
|
|
fix-i2c-s3c2410-resume-race.patch
There is a nasty race between i2c-s3c2410 resume and resume of I2C
driver and the client drivers -- the watchdog device actually gets to
use the dead I2C bus before it is reinitialized by the I2C driver
resume! This patch makes sure any customers get turned away until
the shopkeeper has woken up.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
[PATCH] support mtd NAND commandline partitions for S3C2410
This patch adds support for the mtd NAND core standard method of passing
partition table information from the bootloader into the kernel by using
the kernel commandline.
The board specific code can still manually override and provide a fixed
partition table, so this patch will behave backwards compatible.
Signed-off-by: Harald Welte <laforge@openmoko.org>
Acked-byt: Ben Dooks <ben-linux@fluff.org>
|
|
Since 2.6.23 kbuild produces a 3GB arch/arm/boot/Image because it includes a
.note.gnu.build-id section at address 0 which is followed by 3GB of 0x00.
The --build-id option is set in the toplevel Makefile.
This patch explicitly puts the notes section after the TEXT section.
|
|
|
|
|
|
Support for the newer framebuffer hardware in the
Samsung SoC line of systems, such as the S3C2443,
S3C2450, S3C2416 and the S3C64XX series.
This driver does not have any support yet for the
alpha-blending or chroma-key for mixing the window
output together.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
The LCD driver core calls LCD drivers when either the blanking state
or the display mode has changed, but does not make any check to see
if the called driver has a .set_mode method.
This means if a driver only has a .set_power method then the system
will OOPS on changing mode (and with the console semaphore held so
you cannot easily see the problem).
Fix the problem by ensuring that either callback is valid before use.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add support for the LCD 48WVGA module attached to the
SMDK6410.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add a standard helper to configure the LCD output pins for a 24BPP
display with VSYNC/HSYNC/VDEN.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add a device definition for the new S3C framebuffer
driver.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Provide the initial register definitions for the newer
style of framebuffer cores found in the Samsung SoCs
such as S3C2450, S3C64XX.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmk-next
|
|
|
|
It's showing up as regressions; disabling it very likely just papers
over an underlying issue, but time is running out for 2.6.28, lets get
back to this for 2.6.29
Fixes: #11826 and #11893
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: Fixup deb-pkg target to generate separate firmware deb
|
|
The below is a simplistic fix for "make deb-pkg"; it splits the
firmware out to a linux-firmware-image package and adds an
(unversioned) Suggests to the linux package for this firmware.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Acked-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The "Exclude staging drivers" question is there so that we don't build
staging drivers for allyesconfig or allnoconfig settings, but it's very
irritating when you've already said "no" to staging drivers earlier.
There is absolutely no point in declining twice - once you've declined
the staging drivers, you're done.
So make the second question depend on the first question having been
answered in the affirmative.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux:
Fix nfsd truncation of readdir results
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
cpumask: introduce new API, without changing anything, v3
cpumask: new API, v2
cpumask: introduce new API, without changing anything
|
|
Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some
situations" introduced a bug: on a directory in an exported ext3
filesystem with dir_index unset, a READDIR will only return about 250
entries, even if the directory was larger.
Bisected it back to this commit; reverting it fixes the problem.
It turns out that in this case ext3 reads a block at a time, then
returns from readdir, which means we can end up with buf.full==0 but
with more entries in the directory still to be read. Before 8d7c4203
(but after c002a6c797 "Optimise NFS readdir hack slightly"), this would
cause us to return the READDIR result immediately, but with the eof bit
unset. That could cause a performance regression (because the client
would need more roundtrips to the server to read the whole directory),
but no loss in correctness, since the cleared eof bit caused the client
to send another readdir. After 8d7c4203, the setting of the eof bit
made this a correctness problem.
So, move nfserr_eof into the loop and remove the buf.full check so that
we loop until buf.used==0. The following seems to do the right thing
and reduces the network traffic since we don't return a READDIR result
until the buffer is full.
Tested on an empty directory & large directory; eof is properly sent and
there are no more short buffers.
Signed-off-by: Doug Nazar <nazard@dragoninc.ca>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Impact: cleanup
Clean up based on feedback from Andrew Morton and others:
- change to inline functions instead of macros
- add __init to bootmem method
- add a missing debug check
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Previously I assumed that the receive queues of candidates don't
change during the GC. This is only half true, nothing can be received
from the queues (see comment in unix_gc()), but buffers could be added
through the other half of the socket pair, which may still have file
descriptors referring to it.
This can result in inc_inflight_move_tail() erronously increasing the
"inflight" counter for a unix socket for which dec_inflight() wasn't
previously called. This in turn can trigger the "BUG_ON(total_refs <
inflight_refs)" in a later garbage collection run.
Fix this by only manipulating the "inflight" counter for sockets which
are candidates themselves. Duplicating the file references in
unix_attach_fds() is also needed to prevent a socket becoming a
candidate for GC while the skb that contains it is not yet queued.
Reported-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, all existing users of cnt32_to_63() are fine since the CPU
architectures where it is used don't do read access reordering, and user
mode preemption is disabled already. It is nevertheless a good idea to
better elaborate usage requirements wrt preemption, and use an explicit
memory barrier on SMP to avoid different CPUs accessing the counter
value in the wrong order. On UP a simple compiler barrier is
sufficient.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: struct device - replace bus_id with dev_name(), dev_set_name()
mmc: increase SD write timeout for crappy cards
|
|
Use menuconfig instead of flat configs so that you can disable/enable
regulator items with one selection. Also, use depends instead of
reverse selections to make life easier, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|