aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-03-13rt2x00: Fix basic rate initializationIvo van Doorn
The basic rate which is configured in the register should not match all supported rates, but only the _basic_ rates. Fix this by adding a new flag to the rt2x00_rate structure and whenever the mode is changed, loop over all available rates for that band to get the basic rate mask. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Always enable TSF tickingIvo van Doorn
Whatever mode we are in, according to the legacy drivers we should always enable TSF ticking/counting. We should also always enable the TBCN/TBTT field, this field is only disabled during beacon regeneration. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Make rt2x00leds_register return voidIvo van Doorn
rt2x00dev isn't interested in the rt2x00leds_register() value anyway. So lets make it return void to even prevent people from assuming there is anybody interested in the returnvalue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Allocate priv->tx_ring with vmalloc() IPoIB/cm: Set tx_wr.num_sge in connected mode post_send() IPoIB: Don't drop multicast sends when they can be queued IB/ipath: Reset the retry counter for RDMA_READ_RESPONSE_MIDDLE packets IB/ipath: Fix error completion put on send CQ instead of recv CQ IB/ipath: Fix RC QP initialization IB/ipath: Fix potentially wrong RNR retry counter returned in ipath_query_qp() IB/ipath: Fix IB compliance problems with link state vs physical state
2008-03-13Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: async_tx: checkpatch says s/__FUNCTION__/__func__/g iop-adma.c: replace remaining __FUNCTION__ occurrences fsldma: Add a completed cookie updated action in DMA finish interrupt. fsldma: Add device_prep_dma_interrupt support to fsldma.c dmaengine: Fix a bug about BUG_ON() on DMA engine capability DMA_INTERRUPT. fsldma: Fix fsldma.c warning messages when it's compiled under PPC64.
2008-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: fix issue with busses registering multiple times in sysfs
2008-03-13avoid endless loops in lib/swiotlb.cJan Beulich
Commit 681cc5cd3efbeafca6386114070e0bfb5012e249 ("iommu sg merging: swiotlb: respect the segment boundary limits") introduced two possibilities for entering an endless loop in lib/swiotlb.c: - if max_slots is zero (possible if mask is ~0UL) - if the number of slots requested fits into a swiotlb segment, but is too large for the part of a segment which remains after considering offset_slots This fixes them Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (32 commits) ACPI: thermal: show temperature in millidegree Celsius thermal: fix generic thermal I/F for hwmon acer-wmi: build depends on i8042 documentation: Move power-related files to Documentation/power/ ACPI: buffer array too short in drivers/acpi/system.c acer-wmi: Add DMI quirk for mail LED support on Acer Aspire 3610/ 5610 acer-wmi: Fix DSDT path in documentation acer-wmi: Make device detection error messages more descriptive laptops: move laptop-mode.txt to Documentation/laptops/ ACPICA: Warn if packages with invalid references are evaluated ACPI: add _PRT quirks to work around broken firmware Hibernation: Fix mark_nosave_pages() ACPI: Ignore _BQC object when registering backlight device ACPI: WMI: Clean up handling of spec violating data blocks acer-wmi: Don't warn if mail LED cannot be detected acer-wmi: Rename mail LED correctly & remove hardcoded colour ACPI: use ACPI_DEBUG_PRINT instead of printk in acpi_processor_hotplug_notify() ACPI: button: make real parent for input devices in device tree toshiba_acpi: Enable autoloading ACPI: EC: Handle IRQ storm on Acer laptops ...
2008-03-13block: floppy: fix rmmod lockupJiri Slaby
Floppy rmmod locks up when no such hardware was initialized, since there is nobody to wake the remove code up. Remove the completion, because release is called during platform_unregister anyway. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13kernel-doc: set verbose mode via environmentRandy Dunlap
Honor the environment variable "KBUILD_VERBOSE=1" (as set by make V=1) to enable verbose mode in scripts/kernel-doc. Useful for getting more info and warnings from kernel-doc. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13alpha: use iommu_is_span_boundary helper functionFUJITA Tomonori
iommu_is_span_boundary in lib/iommu-helper.c was exported for PARISC IOMMUs (commit 3715863aa142c4f4c5208f5f3e5e9bac06006d2f). Alpha's IOMMU can use it. This removes the check on the boundary size alignment because iommu_is_span_boundary does. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13char: riscom, fix rc_board indexingJiri Slaby
In riscom8_init_module, rc_board should be indexed by i, not by 0, otherwise the loop is useless. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13spi_bitbang: short transfer status fixJan Nikitenko
SPI controller drivers return number of bytes actually transfered from bitbang->txrx_bufs() method. This updates handling of short transfers (where the transfer size is less than requested): - Even zero byte short transfers should report errors; - Include short transfers in the total of transferred bytes; - Use EREMOTEIO (like USB) not EMSGSIZE to report short transfers Short transfers don't normally mean invalid message sizes, but if the underlying controller driver needs to use EMSGSIZE it can still do so. [db: fix two more minor issues] Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13au1550_spi: fix prototype of irq handlerJan Nikitenko
Remove struct pt_regs *regs from prototype of au1550_spi_irq handler to avoid warning in request_irq(). Also fix comment type leadin. Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13h8300: fix recent uaccess breakageYoshinori Sato
Al Viro wrote: > > After that commit in asm-h8300/uaccess.h we have > > #define get_user(x, ptr) \ > ({ \ > int __gu_err = 0; \ > uint32_t __gu_val = 0; \ > ^^^^^^^^^^^^^^^^^ > switch (sizeof(*(ptr))) { \ > case 1: \ > case 2: \ > case 4: \ > __gu_val = *(ptr); \ > break; \ > case 8: \ > memcpy(&__gu_val, ptr, sizeof (*(ptr))); \ > ^^^^^^^^^^^^^^^^ > > which, of course, is FUBAR whenever we actually hit that case - memcpy of > 8 bytes into uint32_t is obviously wrong. Why don't we simply do Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13pagemap: proper read error handlingMarcelo Tosatti
Fix pagemap_read() error handling by releasing acquired resources and checking for get_user_pages() partial failure. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13smackfs: do not trust `count' in inodes write()sAhmed S. Darwish
Smackfs write() implementation does not put a higher bound on the number of bytes to copy from user-space. This may lead to a DOS attack if a malicious `count' field is given. Assure that given `count' is exactly the length needed for a /smack/load rule. In case of /smack/cipso where the length is relative, assure that `count' does not exceed the size needed for a buffer representing maximum possible number of CIPSO 2.2 categories. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13rt2x00: Rename config_preamble() to config_erp()Ivo van Doorn
Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Check IEEE80211_TXCTL_SEND_AFTER_DTIM flagIvo van Doorn
When mac sets the IEEE80211_TXCTL_SEND_AFTER_DTIM flag, we should check if the ATIM queue is available in the driver and put the frame in that queue for proper behavior (send frame after beacon interval). Unfortunately not all drivers have this ATIM queue, and will lack this feature for now. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Start bugging when rt2x00lib doesn't filter SW diversityIvo van Doorn
rt2x00lib should filter SW diversity out before sending any configuration changes to the driver. When rt2x00lib fails to do this, it is important that such events are reported because it _must_ be fixed. So upgrading the error level to a BUG_ON() which will make sure this bug gets noticed whenever it happens. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Move firmware checksumming to driverIvo van Doorn
rt2x00lib depended on 2 crc algorithms because rt61/rt73 use a different algorithm then rt2800. This means that even when only 1 algorithm was needed, the dependency was still present for both. By moving the checksum generation to the driver we can clean up 2 annoying flags (which indicated which checksum was required) and move the dependency to where it belongs: the driver. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Upgrade queue->lock to use irqsaveIvo van Doorn
The queue->lock could be grabbed from interrupt context, which could lead to lockdep panic like this: kernel: ====================================================== kernel: [ INFO: soft-safe -> soft-unsafe lock order detected ] kernel: 2.6.25-0.95.rc4.fc9 #1 kernel: ------------------------------------------------------ kernel: rt2500pci/1251 [HC0[0]:SC0[1]:HE1:SE0] is trying to acquire: kernel: (&queue->lock){--..}, at: [<ffffffff88213339>] rt2x00queue_get_entry+0x5a/0x81 [rt2x00lib] kernel: kernel: and this task is already holding: kernel: (_xmit_IEEE80211){-...}, at: [<ffffffff8122e9a3>] __qdisc_run+0x84/0x1a9 kernel: which would create a new lock dependency: kernel: (_xmit_IEEE80211){-...} -> (&queue->lock){--..} kernel: kernel: but this new dependency connects a soft-irq-safe lock: kernel: (_xmit_ETHER){-+..} kernel: ... which became soft-irq-safe at: kernel: [<ffffffffffffffff>] 0xffffffffffffffff kernel: kernel: to a soft-irq-unsafe lock: kernel: (&queue->lock){--..} kernel: ... which became soft-irq-unsafe at: kernel: ... [<ffffffff810545a2>] __lock_acquire+0x62d/0xd63 kernel: [<ffffffff81054d36>] lock_acquire+0x5e/0x78 kernel: [<ffffffff812a1497>] _spin_lock+0x26/0x53 kernel: [<ffffffff88212f98>] rt2x00queue_reset+0x16/0x40 [rt2x00lib] kernel: [<ffffffff88212fd4>] rt2x00queue_alloc_entries+0x12/0xab [rt2x00lib] kernel: [<ffffffff88213091>] rt2x00queue_initialize+0x24/0xf2 [rt2x00lib] kernel: [<ffffffff88212036>] rt2x00lib_start+0x3b/0xd4 [rt2x00lib] kernel: [<ffffffff88212609>] rt2x00mac_start+0x18/0x1a [rt2x00lib] kernel: [<ffffffff881b9a4b>] ieee80211_open+0x1f3/0x46d [mac80211] kernel: [<ffffffff8121d980>] dev_open+0x4d/0x8b kernel: [<ffffffff8121d41e>] dev_change_flags+0xaf/0x172 kernel: [<ffffffff81224fc2>] do_setlink+0x276/0x338 kernel: [<ffffffff81225198>] rtnl_setlink+0x114/0x116 kernel: [<ffffffff812262fc>] rtnetlink_rcv_msg+0x1d8/0x1f9 kernel: [<ffffffff8123649a>] netlink_rcv_skb+0x3e/0xac kernel: [<ffffffff8122611a>] rtnetlink_rcv+0x29/0x33 kernel: [<ffffffff81235eed>] netlink_unicast+0x1fe/0x26b kernel: [<ffffffff81236224>] netlink_sendmsg+0x2ca/0x2dd kernel: [<ffffffff812103b3>] sock_sendmsg+0xfd/0x120 kernel: [<ffffffff812105a8>] sys_sendmsg+0x1d2/0x23c kernel: [<ffffffff8100c1c7>] tracesys+0xdc/0xe1 kernel: [<ffffffffffffffff>] 0xffffffffffffffff This can be fixed by using the irqsave/irqrestore versions during the queue->lock handling. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Fix trivial log messageLuis Correia
Fix trivial log message. Signed-off-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00:correct rx packet length for USB devicesAdam Baker
When fixing up the packet alignment, if we had to add 2 bytes to the front of the skb we need to remember to take them off the end afterwards. This fixes reception of encrypted packets which were otherwise failing with an invalid ICV. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Only disable beaconing just before beacon updateIvo van Doorn
We should not write 0 to the beacon sync register during config_intf() since that will clear out the beacon interval and forces the beacon to be send out at the lowest interval. (reported by Mattias Nissler). The side effect of the same bug was that while working with multiple virtual AP interfaces a change for any of those interfaces would disable beaconing untill an beacon update was provided. This is resolved by only updating the TSF_SYNC value during config_intf(). In update_beacon() we disable beaconing temporarily to prevent fake beacons to be transmitted. Finally kick_tx_queue() will enable beaconing again. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Use skbdesc fields for descriptor initializationIvo van Doorn
In rt2x00lib_write_tx_desc() the skb->data and skb->len fields were incorrectly used. For USB drivers both of those values contain invalid data (skb->data points to the device descriptor, skb->len contains the frame _and_ descriptor length). Instead of using the skbuffer fields we should use the skbdesc fields which are correctly initialized and contain all the data that we need. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Don't use unitialized rxdesc->sizeMattias Nissler
rxdesc->size is unitialized before the desriptor has been read. Move the truncation of the sk buffer to the moment all variables have been initialized. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Don't use uninitialized desc_lenIvo van Doorn
skbdesc->desc_len is uninitialized at the start of the function. So it is a _bad_ idea to use it... Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Use the correct size when copying the control info in txdoneMattias Nissler
The sizeof() operator was incorrectly applied to the pointer, not the struct. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Initialize TX control field in data entriesMattias Nissler
In the TX path, the driver didn't copy the TX control data structure. Thus, it was invalid in the TX done handler, causing serious trouble and misbehaviour. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Align RX descriptor to 4 bytesIvo van Doorn
Some architectures give problems when reading RX frame descriptor words when the descriptor is not aligned on a 4 byte boundrary. Due to optimalizations for the ieee80211 payload 4 byte alignment, it is no longer guarenteed that the descriptor is placed on the 4 byte boundrary (In fact, for rt73usb it is absolutely never aligned to 4 bytes, for rt2500usb it depends on the length of the payload). This will copy the descriptor to a 4 byte aligned location before it is read for the first time. This will also move the payload data alignment in rt2x00usb (instead of inside the driver) where it has always belonged. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13b43: pull out helpers for writing noise tableHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rndis_wlan: cleanup, rename structure membersJussi Kivilinna
Rename members of ndis_80211_* structures to match the style of the rest of the code. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rndis_wlan: cleanup, rename and reorder enums and structuresJussi Kivilinna
Rename enums and structures to ndis_80211_* for greater readability. Also change order so that enumerations are presented first. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13drivers/net/wireless/ath5k - convert == (true|false) to simple logical testsJoe Perches
(test == true) is not nice. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13libertas: implement SSID scanning for SIOCSIWSCANHolger Schurig
After my bit scan re-writing the SIOCSIWSCAN wext ioctl no longer supported scanning for a specific SSID. However, wpa_supplicant is a possible user of this ioctl, so here is code that add's this. While passing, removed even more of the debugfs-based scanning. You can (and should) the SIOCSIWSCAN to ask for scans, so there is no need for proprietary interfaces for scanning. And, besides, the scan result couldn't be used further, e.g. not for associating. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13the scheduled rc80211-simple.c removalAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13the scheduled ieee80211 softmac removalAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13the scheduled bcm43xx removalAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <Larry.Finger@lwfinger.net> Cc: <stefano.brivio@polimi.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13make b43_mac_{enable,suspend}() staticAdrian Bunk
b43_mac_{enable,suspend}() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Add suspend/resume handlers to rt2x00rfkillIvo van Doorn
Add suspend/resume handlers to rt2x00rfkill to have it stop the input-polldev and prevent it from calling rt2x00 during suspend period. This could lead to a NULL pointer fault when rt2x00 suspended, but polldev send a request, because the csr_addr is NULL. Also don't let the rfkill allocation/registration block the initialization of the entire device. Just print a warning and continue as if nothing happened. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13ath5k: disable irq handling in ath5k_hw_detach()Pavel Roskin
Once ah has been freed, it may not be accessed. Set ATH_STAT_INVALID bit to make the interrupt handler return IRQ_NONE without accessing ah. This fixes oops on unload with CONFIG_DEBUG_SHIRQ enabled. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13b43: phy.c fix typo in register writeHarvey Harrison
Commit 61bca6eb85c863603d6054530e2f65c3b9aba85b b43: rewrite A PHY initialization has a typo, the result of the register read should be masked, not the register offset. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13PS3: gelic: change the prefix of the net interface for wirelessMasakazu Mokuno
The gelic driver uses two net interfaces, one for ethernet and the other for wireless. They share same MAC address and use 'eth' prefix for the name. As udev uses the MAC address to check uniqueness, this is somewhat problematic. So change the prefix of the network interface name for the wireless so that udev can have an easy way to distinguish interfaces. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13PS3: gelic: ignore scan info from zero SSID beaconsMasakazu Mokuno
Some implementations of the hidden SSID APs emit beacons which have the zero length SSID information element instead of SSID padded by null (\0) characters. If the firmware of the PS3 wireless hardware meets these beacons, it abandons parsing IEs. Thus guest OSes get the invalid scan information for the AP. To work around this, ignore these scan informations from the list. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13prism54: support for 124a:4025 - another version of IOGear GWU513 802.11gJan Slupski
Add support to p54usb driver for apparently another version of IOGear GWU513 802.11g USB network card that uses GW3887IK chipset and is recognized as "124a:4025 AirVast" by lsusb. Cc: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13async_tx: checkpatch says s/__FUNCTION__/__func__/gDan Williams
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-13iop-adma.c: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-13fsldma: Add a completed cookie updated action in DMA finish interrupt.Zhang Wei
The patch 'fsldma: do not cleanup descriptors in hardirq context' (commit 222ccf9ab838a1ca7163969fabd2cddc10403fb5) removed descriptors cleanup function to tasklet but the completed cookie do not updated. Thus, the DMA controller will get lots of duplicated transfer interrupts. Just make a completed cookie update in interrupt handler. And keep other cleanup jobs in tasklet function. Tested-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-13fsldma: Add device_prep_dma_interrupt support to fsldma.cZhang Wei
This is a bug that I assigned DMA_INTERRUPT capability to fsldma but missing device_prep_dma_interrupt function. For a bug in dmaengine.c the driver passed BUG_ON() checking. The patch fixes it. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 11:26:12 +0000