aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-28libertas: convert SUBSCRIBE_EVENT to a direct commandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: change inference about buffer size in lbs_cmd()David Woodhouse
sizeof(*cmd) is going to give the total size of the data structure that we allocated, more often than not. But the size of the command to be _sent_ could be a lot smaller, as it is in the KEY_MATERIAL and SUBSCRIBE_EVENT commands for example. So swap them round; let the caller set the _command_ size explicitly in the header, and infer the maximum response size from the data structure. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert ENABLE_RSN to a direct commandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert SET_WEP to a direct commandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert SLEEP_PARAMS to a direct commandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert INACTIVITY_TIMEOUT to a direct commandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: convert RADIO_CONTROL to a direct commandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: submit RSSI command on tx timeout, to check whether module is deadDavid Woodhouse
We don't necessarily want to reset the device on a TX timeout. But more often than not, the real cause is that the firmware has crapped itself, not just that the network is busy. So submit any harmless command, and if _that_ times out, then the error handling code will reset the module, as appropriate. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: make lbs_submit_command always 'succeed' and set command timerDavid Woodhouse
Even if it fails, we want to wait a while and try again, with an ultimate timeout if it the condition persists. So again, just use the standard command timeout behaviour. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: discard DEFER responses to commands; let the timeout triggerDavid Woodhouse
When the firmware returns 0x0004, it wants us to try again later. We can achieve that simply by throwing out the response and letting the command timeout code kick in. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: use priv->upld_buf for command responsesDavid Woodhouse
If we don't scribble over the command we sent, then we can retry it when the firmware responds with 0x0004 (which means -EAGAIN). Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: reduce explicit references to priv->cur_cmd->cmdbufDavid Woodhouse
We have a local variable 'resp' which we use for this. So use it, instead of typing the whole thing. In preparation for actually using priv->upld_buf for the responses instead... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: Check for PS mode support on USB devicesDavid Woodhouse
Move the various firmware setup bits into a separate function, which used to do just boot2 version. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: allow for PS mode to be disabled when firmware doesn't support itDavid Woodhouse
Otherwise, we go into an endless busy loop trying to enable PS mode when the command queue is empty, dealing with the error response, and then trying to enable PS mode again because the command queue is empty.... it doesn't really save much power. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: handle HOST_AWAKE event by sending WAKEUP_CONFIRM commandDavid Woodhouse
lbs_send_confirmwake() is a bit ugly but matches the way we confirm sleep. We'll deal with that whole thing later. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: don't clear priv->dnld_sent after sending sleep confirmDavid Woodhouse
DNLD_RES_RECEIVED is a bit of a misnomer -- we never wait for the result to be received; it's purely representing the state of the TX path, and in this case the TX path is definitely busy. Of course, that means that we don't actually care about DATA_SENT vs. CMD_SENT either, but that's a can of worms for another day... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: fix buffer handling of PS_MODE commands and responsesDavid Woodhouse
Commit 5b8845345e7385d2eb37fac22ba9ab6905988be5 (or, in case the git workflow is broken and patches get recommitted, the commit entitled 'libertas: rename and re-type bufvirtualaddr to cmdbuf' by dcbw), introduced a number of bugs where we once had a pointer to a command _payload_, but now we use the pointer to the command header instead. The fix isn't wonderfully pretty for now, but it'll get better when we finish converting all commands so the structures include the header. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add SLEEP_PERIOD and FW_WAKE_METHOD command definitionsDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: fix return from lbs_update_channel()David Woodhouse
If we return the channel number in a 'ret' variable where anything non-zero is later interpreted as an error, that isn't nice. It breaks WPA, for a start. OLPC trac #5485 Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill 'addtail' argument to lbs_queue_cmd() and make it staticDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: handle command timeout in main thread instead of directly in timerDavid Woodhouse
And handle the case where it times out more than once, too, instead of locking up for ever. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: ensure response buffer size is always set for lbs_cmd_with_responseDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add __lbs_cmd_async() for asynchronous command submissionDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: store command result in cmdnode instead of priv->cur_cmd_retcodeDavid Woodhouse
... at least for users of __lbs_cmd(). Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill pdata_buf member of struct cmd_ctrl_nodeDavid Woodhouse
We can use the callback_arg for it; that's the way we're heading anyway... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: let __lbs_cmd() free its own cmdnodeDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill cleanup_cmdnode()David Woodhouse
Move the wakeup into lbs_complete_command(), and leave the other bits in __lbs_cleanup_and_insert_cmd() which was the only caller now anyway. There are two remaining direct callers of lbs_cleanup_and_insert_cmd(), and they are both fine without the wakeup. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: don't re-initialise cmdnode when taking it off the free queueDavid Woodhouse
We initialise it when we add it to the queue. No need to do it again. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: introduce and use lbs_complete_command() for command completionDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: remove some pointless checks for cmdnode buffer being presentDavid Woodhouse
We allocate them all at the same time, at startup. If they go missing, we have more serious things to worry about, and the resulting oops will be a perfectly acceptable result. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: don't use __lbs_cmd() with empty callback in if_usb.cDavid Woodhouse
We're about to change semantics, leaving callers of lbs_prepare_and_send_command() with the old broken priv->cur_cmd_retcode crap. The existence of the callback command will be the trigger for the new semantics when handling the response. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: rename and clean up DownloadcommandToStationDavid Woodhouse
Call it lbs_submit_command(), remove a bunch of things which can be (or, in the case of zeroing ->cmdwaitqwoken, already are) done elsewhere. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill unused wait_option field in struct cmd_ctrl_nodeDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill whitespace at end of linesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: clean up if_usb driverDavid Woodhouse
It was just getting on my tits, really. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: stop attempting to reset devices on unloadDavid Woodhouse
It wasn't working anyway -- by the time we get into if_usb_disconnect() the USB core has already stopped us talking to the thing; even if it's just on unload and the device still exists. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: don't exit worker thread until kthread_stop() is calledDavid Woodhouse
The kthread code can't cope with a thread exiting of its own accord and then someone calling kthread_stop() for it. When the thread detects that it needs to die, make it wait for kthread_stop() to be called. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43legacy: Fix rfkill radio LEDLarry Finger
This fixes Bug #9414 for b43legacy. This patch is the equivalent of one submitted earlier for b43. Since addition of the rfkill callback, the LED associated with the off switch on the radio has not worked for several reasons: (1) Essential data in the rfkill structure were missing. (2) The rfkill structure was initialized after the LED initialization. (3) There was a minor memory leak if the radio LED structure was inited. Once the above problems were fixed, additional difficulties were noted: (4) The radio LED was in the wrong state at startup. (5) The radio switch had to be manipulated twice for each state change. (6) A circular mutex locking situation existed. (7) If rfkill-input is built as a module, it is not automatically loaded. This patch fixes all of the above and removes a couple of sparse warnings. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28S2io: Fixes to enable multiple transmit fifosRamkrishna Vepa
Multiple transmit fifo initialization - - Assigned equal scheduling priority for all configured FIFO's. - Modularized transmit traffic interrupt initialization since it is executed in s2io_card_up and s2io_link. Enable continuous tx interrupt when link is UP and vice verse. - Enable transmit interrupts for all configured transmit fifos. - Fixed typo errors. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28S2io: Fixes to enable multiple transmit fifo supportSurjit Reang
Fixes to enable multiple transmit fifos (upto a maximum of eight). - Moved single tx_lock from struct s2io_nic to struct fifo_info. - Moved single ufo_in_band_v structure from struct s2io_nic to struct fifo_info. - Assign the respective interrupt number for the transmitting fifo in the transmit descriptor (TXD). - Added boundary checks for number of FIFOs enabled and FIFO length. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28cxgb3 - Fix EEH, missing softirq blockingDivy Le Ray
set_pci_drvdata() stores a pointer to the adapter, not the net device. Add missing softirq blocking in t3_mgmt_tx. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - parity initialization for T3C adapters.Divy Le Ray
Add parity initialization for T3C adapters. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi: export pasemi_dma_init()Olof Johansson
Forgot to export this one. Needed when pasemi_mac is compiled as a module. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28PLIP driver: convert the semaphore killed_timer_sem to completionMatthias Kaehlcke
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28bnx2x depends on ZLIB_INFLATELee Schermerhorn
The bnx2x module depends on the zlib_inflate functions. The build will fail if ZLIB_INFLATE has not been selected manually or by building another module that automatically selects it. Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2 and others. This seems to fix it. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Eliezer Tamir <eliezert@broadcom.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pcmcia net: use roundup_pow_of_two() macro instead of grotesque loopRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28e1000: Dump the eeprom when a user encounters a bad checksumAuke Kok
To help supporting users with a bad eeprom checksum, dump the eeprom info when such a situation is encountered by a user. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28ixgb: enable sun hardware support for broadcom phyMatheos Worku
Implement support for a SUN-specific PHY. SUN provides a modified 82597-based board with their own PHY that works with very little modification to the code. This patch implements this new PHY which is identified by the subvendor device ID. The device ID of the adapter remains the same. Signed-off-by: Matheos Worku <matheos.worku@sun.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28e1000: remove no longer used code for pci read/write cfgAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28ixgb endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>