aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-28rndis_wlan: fix sparse warningsJohannes Berg
It is obviously wrong to use an enum in a little endian struct, and those other enums should be declared differently. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-26[AF_KEY]: Fix oops by converting to proc_net_*().David S. Miller
To make sure the procfs visibility occurs after the ->proc_fs ops are setup, use proc_net_fops_create() and proc_net_remove(). This also fixes an OOPS after module unload in that the name string for remove was wrong, so it wouldn't actually be removed. That bug was introduced by commit 61145aa1a12401ac71bcc450a58c773dd6e2bfb9 ("[KEY]: Clean up proc files creation a bit.") Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26CONNECTOR: make cn_already_initialized staticLi Zefan
It is used in connector.c only, so make it static. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26[IPV4]: Reset scope when changing addressBjorn Mork
This bug did bite at least one user, who did have to resort to rebooting the system after an "ifconfig eth0 127.0.0.1" typo. Deleting the address and adding a new is a less intrusive workaround. But I still beleive this is a bug that should be fixed. Some way or another. Another possibility would be to remove the scope mangling based on address. This will always be incomplete (are 127/8 the only address space with host scope requirements?) We set the scope to RT_SCOPE_HOST if an IPv4 interface is configured with a loopback address (127/8). The scope is never reset, and will remain set to RT_SCOPE_HOST after changing the address. This patch resets the scope if the address is changed again, to restore normal functionality. Signed-off-by: Bjorn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26[IPV6]: Add missing initializations of the new nl_info.nl_net fieldBenjamin Thery
Add some more missing initializations of the new nl_info.nl_net field in IPv6 stack. This field will be used when network namespaces are fully supported. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26[MACVLAN]: Update Kconfig to refer to iproutePatrick McHardy
Since the macvlan release I had at least 5 users asking how to configure it since the old userspace tool doesn't work with the version in the kernel. Add a pointer to the Kconfig help. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26bluetooth: delete timer in l2cap_conn_del()Thomas Gleixner
Delete a possibly armed timer before kfree'ing the connection object. Solves: http://lkml.org/lkml/2008/2/15/514 Reported-by:Quel Qun <kelk1@comcast.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-24tipc: fix integer as NULL pointer sparse warnings in tipcHarvey Harrison
net/tipc/cluster.c:145:2: warning: Using plain integer as NULL pointer net/tipc/link.c:3254:36: warning: Using plain integer as NULL pointer net/tipc/ref.c:151:15: warning: Using plain integer as NULL pointer net/tipc/zone.c:85:2: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-24Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-02-24Linux 2.6.25-rc3Linus Torvalds
2008-02-24i2c-i801: Add support for the ICH10Gaston, Jason D
Add the Intel ICH10 SMBus Controller DeviceID's and updates Tolapai support. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24i2c: Make i2c_register_board_info() a NOP when CONFIG_I2C_BOARDINFO=nDavid Brownell
Don't require platform code to be #ifdeffed according to whether I2C is enabled or not ... if it's not enabled, let GCC compile out all I2C device declarations. (Issue noted on an NSLU2 build that didn't configure I2C.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24i2c-pca-isa: Add access check to legacy ioportsChristian Krafft
When probing i2c-pca-isa writes to legacy ioports, which crashes the kernel if there is no device at that port. This patch adds a check_legacy_ioport call, so probe fails gracefully and thus prevents the oops. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24Alchemy: compile fixManuel Lauss
Commit 8b798c4d16b762d15f4055597ff8d87f73b35552 broke alchemy build, fix it. Pointed out by Adrian Bunk. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24i2c: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24i2c-pxa: Misc fixesWolfram Sang
While working on the PCA9564-platform driver, I sometimes had a glimpse at the pxa-driver. I found some suspicious places, and this patch contains my suggestions. Note: They are not tested, due to no hardware. [JD: Some more fixes.] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Eric Miao <ymiao3@marvell.com>
2008-02-24ARM: OMAP: Release i2c_adapter after use (Siemens SX1)Jean Delvare
Each call to i2c_get_adapter() must be followed by a call to i2c_put_adapter() to release the grabbed reference. Otherwise the reference count grows forever and the adapter can never be unregistered. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Vladimir Ananiev <vovan888@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
2008-02-23Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-core: fix kernel-doc warning sata_fsl: fix build with ATA_VERBOSE_DEBUG [libata] ahci: AMD SB700/SB800 SATA support 64bit DMA libata-pmp: clear hob for pmp register accesses libata: automatically use DMADIR if drive/bridge requires it power_state: get rid of write-only variable in SATA pata_atiixp: Use 255 sector limit
2008-02-24libata-core: fix kernel-doc warningRandy Dunlap
Fix libata-core kernel-doc warning: Warning(linux-2.6.25-rc2-git6//drivers/ata/libata-core.c:168): No description found for parameter 'ap' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24sata_fsl: fix build with ATA_VERBOSE_DEBUGAnton Vorontsov
This patch fixes build and few warnings when ATA_VERBOSE_DEBUG is defined: CC drivers/ata/sata_fsl.o drivers/ata/sata_fsl.c: In function ‘sata_fsl_fill_sg’: drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘void *’ drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 4 has type ‘struct prde *’ drivers/ata/sata_fsl.c: In function ‘sata_fsl_qc_issue’: drivers/ata/sata_fsl.c:459: error: ‘csr_base’ undeclared (first use in this function) drivers/ata/sata_fsl.c:459: error: (Each undeclared identifier is reported only once drivers/ata/sata_fsl.c:459: error: for each function it appears in.) drivers/ata/sata_fsl.c: In function ‘sata_fsl_freeze’: drivers/ata/sata_fsl.c:525: error: ‘csr_base’ undeclared (first use in this function) make[2]: *** [drivers/ata/sata_fsl.o] Error 1 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24[libata] ahci: AMD SB700/SB800 SATA support 64bit DMAShane Huang
SB700 SATA controller can support 64 bit DMA, the previous commit badc2341579511a247f5993865aa68379e283c5c was added with careless reference to SB600, which should be modified by this patch. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24libata-pmp: clear hob for pmp register accessesMark Lord
>> Mark Lord wrote: >>> Tejun, I've added PMP to sata_mv, and am now trying to get it >>> to work with a Marvell PM attached. >>> >>> And the behaviour I see is very bizarre. >>> >>> After hard+soft resets, the PM signature is found, >>> and libata interrogates the PM registers. >>> >>> It successfully reads register 0, and then register 1. >>> But all subsequent registers read out (incorrectly) as zeros. ... This behavior has been confirmed by Marvell with a SATA analyzer. The Marvell port-multiplier apparently likes to see clean HOB information when accessing PMP registers. Since sata_mv uses PIO shadow register access, this doesn't happen automatically, as it might in a more purely FIS-based driver (eg. ahci). One way to fix this is to flag these commands with ATA_TFLAG_LBA48, forcing libata to write out the HOB fields with known (zero) values. Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24libata: automatically use DMADIR if drive/bridge requires itTejun Heo
Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24power_state: get rid of write-only variable in SATAPavel Machek
power_state is scheduled for removal, and libata uses it in write-only mode. Remove it. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24pata_atiixp: Use 255 sector limitAlan Cox
AHCI needs sorting too but this deals with the old interface Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: remove unused read value in ASPM disable code.Auke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: fix spelling errors in commentsAuke Kok
Fix some spelling errors and inconsistencies in comment blocks. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: fix flow control denial of service possibilityJesse Brandeburg
this patch avoids a denial of service from an evildoer sending a continuous stream of flow control at our adapter that is plugged into a non-flow control enabled switch. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: fix flow control when using ethtool overridesJesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: fix link up message to show ethX:Jesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: 82573 can use eerd method to read eepromAuke Kok
This simplifies the 82571/2/3 family initialization a bit and removes an initialization table no longer needed. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24ixgb: add RNBC counter - no buffer count - to ethtool statsAuke Kok
This counter is valuable to determine if the system is unable to timely return buffers to the hardware and this counter starts to increase well before the hardware starts to drop packets. If users experience rx_no_buffer_count increasing, they should increase the amount of descriptors. That will provide more buffers for the hardware and will decrease the chance of hard drops. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24macb: Fix speed settingAtsushi Nemoto
Fix NCFGR.SPD setting on 10Mbps. This bug was introduced by conversion to generic PHY layer in kernel 2.6.23. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24sky2: fix LED managementStephen Hemminger
Fix problems in LED management, so ethtool -p works correctly on Yukon-EC and other chips. The driver was incorrectly setting the PHY LED overide bits. Moral: read the spec sheet, not the vendor driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24[netdrvr] via-rhine: Use register offset definition for WOLcgClrLaura Garcia
Use register offset definition for WOLcgClr, rather than a magic number. This patch does not change the driver behaviour. Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) [NETFILTER]: fix ebtable targets return [IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly. [NET]: Restore sanity wrt. print_mac(). [NEIGH]: Fix race between neighbor lookup and table's hash_rnd update. [RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK tg3: ethtool phys_id default [BNX2]: Update version to 1.7.4. [BNX2]: Disable parallel detect on an HP blade. [BNX2]: More 5706S link down workaround. ssb: Fix support for PCI devices behind a SSB->PCI bridge zd1211rw: fix sparse warnings rtl818x: fix sparse warnings ssb: Fix pcicore cardbus mode ssb: Make the GPIO API reentrancy safe ssb: Fix the GPIO API ssb: Fix watchdog access for devices without a chipcommon ssb: Fix serial console on new bcm47xx devices ath5k: Fix build warnings on some 64-bit platforms. WDEV, ath5k, don't return int from bool function WDEV: ath5k, fix lock imbalance ...
2008-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: make IOMMU code respect the segment boundary limits [SPARC64]: Fix cpu trampoline et al. mismatch warnings. [SPARC64]: More sparse warning fixes in process.c [SPARC64]: Fix sparse warning wrt. fault_in_user_windows. [SPARC64]: Kill show_regs32(). [SPARC64]: Fix sparse warnings wrt. __show_regs(). [SPARC64]: Kill show_stackframe{,32}(). [SPARC64]: Fix sparse warnings wrt. machine_alt_power_off().
2008-02-23net/phy/mdio_bus.c: fix a check-after-useAdrian Bunk
This patch fixes a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23igb: Fix panic with NICs with 1000BASE-SX PHYBill Hayes
This patch eliminates a kernel panic with the igb driver in 2.6.25-rc2 when running on a Intel 82575 Ethernet controller with a 1000BASE-SX PHY. The panic does not happen with the 1000BASE-T PHY, only with a SX connection. Signed-off-by: Bill Hayes <bill.hayes@hp.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23gianfar: don't pass NULL dev ptr to DMA opsBecky Bruce
Change all dma op invocations in gianfar.c to actually pass in the device pointer. Currently, the value is ignored, but it will be used going forward as we implement archdata for 32-bit powerpc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23sis190: read the mac address from the eeprom firstFrancois Romieu
Reading a serie of zero from the cmos sram area do not work well with is_valid_ether_addr(). Let's read the mac address from the eeprom first as it seems more reliable. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=9831 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23tlan: add static to function definitionsHarvey Harrison
The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23claw: make use of DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23pcnet_cs: if AX88190-based card, printk "use axnet_cs instead" message.Komuro
* If ConfigBase is 0x03c0 && manfid is (0x0149,0xc1ab), printk "use axnet_cs instead" message. Actually, most of the card with manfid(0x0149, 0xc1ab) use pcnet_cs driver. * remove entry (0x021b, 0x0202) Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23drivers/net/cs89x0.c: compilation warning fixLeonardo Potenza
Suppress the warning message about the 'netcard_portlist' defined but not used. Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23virtio_net: Fix oops on early interrupts - introduced by virtio reset codeChristian Borntraeger
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23uli526x partially recognizing interfaceGrant Grundler
Patch fixes: http://bugzilla.kernel.org/show_bug.cgi?id=5839 Init sequence needs to poll phy until phy reset is complete. This is the same problem that I fixed in 2002 in tulip driver. Thanks to manty@manty.net for testing this patch. Thanks to Pozsar Balazs <pozsy@uhulinux.hu> for posting/testing a similar patch before: http://lkml.org/lkml/2006/8/21/45 Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23update TULIP MAINTAINERSGrant Grundler
Kyle and I are co-maintaining tulip driver. Normally kyle will review my patchs and submit them. I'll deal with bugzilla.kernel.org bugs and try to resolve those bugs. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23igb: fix legacy mode irq issueAndy Gospodarek
I booted an igb kernel with the option pci=nomsi and instantly noticed that interrupts no longer worked on my igb device. I took a look at the interrupt initialization and quickly discovered a comment stating: "DO NOT USE EIAME or IAME in legacy mode" It seemed a bit odd that bits to enable IAM were being set in legacy interrupt mode, so I dropped out the following parts and interrupts began working fine again. [Updated code flow and a nitpick spelling error --Auke] Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23fs_enet: Don't call phy_mii_ioctl() in atomic context.Scott Wood
The lock acquisition in fs_ioctl() does not appear to actually be necessary, and thus is simply removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 02:43:04 +0000