aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-16V4L/DVB (12001): lgs8gxx: update signal strength scaleDavid Wong
lgs8gxx: update signal strength scale Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (12000): lgs8gxx: lgs8913 fake signal strength option default onDavid Wong
lgs8gxx: lgs8913 fake signal strength option default on. Original calculation is too slow. Signed-off-by: David T.L. Wong <davidtlwong <at> gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11999): af9015: fix stack corruption bugJan Nikitenko
This patch fixes stack corruption bug present in af9015_eeprom_dump(): the buffer buf is one byte smaller than required - there is 4 chars for address prefix, 16*3 chars for dump of 16 eeprom bytes per line and 1 byte for zero ending the string required, i.e. 53 bytes, but only 52 are provided. The one byte missing in stack based buffer buf causes following oops on MIPS little endian platform, because i2c_adap pointer in af9015_af9013_frontend_attach() is corrupted by inlined function af9015_eeprom_dump(): CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 803a4488, ra == c049a1c8 Oops[#1]: Cpu 0 $ 0 : 00000000 10003c00 00000000 803a4468 $ 4 : 8f17c600 8f067b30 00000002 00000038 $ 8 : 00000001 8faf3e98 11da000d 09010002 $12 : 00000000 00000000 00000000 0000000a $16 : 8f17c600 8f067b68 8faf3c00 8f067c04 $20 : 8f067b9c 00000100 8f067bf0 80104100 $24 : 00000000 2aba9fb0 $28 : 8f066000 8f067af0 802cbc48 c049a1c8 Hi : 00000000 Lo : 00000000 epc : 803a4488 i2c_transfer+0x20/0x104 Not tainted ra : c049a1c8 af9013_read_reg+0x78/0xc4 [af9013] Status: 10003c03 KERNEL EXL IE Cause : 00808008 BadVA : 00000000 PrId : 03030200 (Au1550) Modules linked in: af9013 dvb_usb_af9015(+) dvb_usb dvb_core firmware_class i2c_au1550 au1550_spi Process modprobe (pid: 2757, threadinfo=8f066000, task=8fade098, tls=2aad6470) Stack : c049f5e0 80163090 805ba880 00000100 8f067bf0 0000d733 8f067b68 8faf3c00 8f067c04 c049a1c8 80163bc0 8056a630 8f067b40 80163224 80569fc8 8f0033d7 00000038 80140003 8f067b2c 00010038 c0420001 8f067b28 c049f5e0 00000004 00000004 c049a524 c049d5a8 c049d5a8 00000000 803a6700 00000000 8f17c600 c042a7a4 8f17c600 c042a7a4 c049c924 00000000 00000000 00000002 613a6c00 ... Call Trace: [<803a4488>] i2c_transfer+0x20/0x104 [<c049a1c8>] af9013_read_reg+0x78/0xc4 [af9013] [<c049a524>] af9013_read_reg_bits+0x2c/0x70 [af9013] [<c049c924>] af9013_attach+0x98/0x65c [af9013] [<c04257bc>] af9015_af9013_frontend_attach+0x214/0x67c [dvb_usb_af9015] [<c03e2428>] dvb_usb_adapter_frontend_init+0x20/0x12c [dvb_usb] [<c03e1ad8>] dvb_usb_device_init+0x374/0x6b0 [dvb_usb] [<c0426120>] af9015_usb_probe+0x4fc/0xfcc [dvb_usb_af9015] [<80381024>] usb_probe_interface+0xbc/0x218 [<803227fc>] driver_probe_device+0x12c/0x30c [<80322a80>] __driver_attach+0xa4/0xac [<80321ed0>] bus_for_each_dev+0x60/0xd0 [<8032162c>] bus_add_driver+0x1e8/0x2a8 [<80322cdc>] driver_register+0x7c/0x17c [<80380d30>] usb_register_driver+0xa0/0x12c [<c042e030>] af9015_usb_module_init+0x30/0x6c [dvb_usb_af9015] [<8010d2a4>] __kprobes_text_end+0x3c/0x1f4 [<80167150>] sys_init_module+0xb8/0x1cc [<80102370>] stack_done+0x20/0x3c Code: afb10018 7000003f 00808021 <8c430000> 7000003f 1060002d 00c09021 8f830014 3c02efff Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11998): se401: Fix coding styleAlan Cox
Having fixed the sprintfs I decided a quick clean wouldn't do any harm so it was actually easy to read in future. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11997): gspca - stv06xx: remove needless if check and gotoAlexey Klimov
Patch removes needless if check and goto. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Reviewed-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11996): saa7134: add support for AVerMedia M103 (f736)Barry Kitson
Add 1461:f736 to the list of identifiers corresponding to the SAA7134_BOARD_AVERMEDIA_M103 board. This patch adds support for a variant of the AVerMedia M103 MiniPCI DVB-T Hybrid card. Signed-off-by: Barry Kitson <b.kitson@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11995): zr364xx.c: vfree does its own NULL checkFigo.zhang
vfree() does it's own NULL checking, no need for explicit check before calling it. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11993): V4L/pwc - use usb_interface as parent, not usb_deviceLennart Poettering
The current code creates a sysfs device path where the video4linux device is child of the usb device itself instead of the interface it belongs to. That is evil and confuses udev. This patch does basically the same thing as Kay's similar patch for the ov511 driver: at git commit ce96d0a44a4f8d1bb3dc12b5e98cb688c1bc730d Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11992): Add missing __devexit_p()Jean Delvare
Add missing __devexit_p() to several drivers. Also add a few missing __init, __devinit and __exit markers. These errors could result in build failures depending on the kernel configuration. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11991): buf-core.c: add pointer checkFigo.zhang
add poiter check for videobuf_queue_core_init(). any guys who write a v4l driver, pass a NULL pointer or a non-inintial pointer to the first parameter such as videobuf_queue_sg_init() , it would be crashed. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11990): saa7134-video.c: fix the block bugfigo.zhang
when re-open or re-start (video_streamon), the q->curr would not be NULL in saa7134_buffer_queue(), and all the qbuf will add to q->queue list,no one to do activate to start DMA,and then no interrupt would happened,so it will be block. In VIDEOBUF_NEEDS_INIT state, initialize the curr pointer to be NULL in the buffer_prepare(). Signed-off-by: Figo.zhang <figo.zhang@kolorific.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11987): au8522: add support for QAM-64 modulation typeFrank Dischner
Add support for QAM64 modulation type to the au8522 demod driver. Signed-off-by: Frank Dischner <phaedrus961@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11986): Kconfig: DVBWorld DVB-C USB Cable card needs tda1002x frontendMauro Carvalho Chehab
Auto-selects tda1002x if !DVB_FE_CUSTOMISE Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11984): Add support for yet another SDMC DM1105 based DVB-S card.Igor M. Liplianin
Add support for SDMC DM1105 based DVB-S cards with PCI ID 195d:1105 Also create separate workqueue for demuxing. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11983): Add support for DVBWorld DVB-C USB Cable card.Igor M. Liplianin
DVBWorld DVB-C USB Cable card contains TUA6034 tuner, TDA10023 demod and Cypress FX-2 controller. http://www.worlddvb.com/product/htm/usbc.htm Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11982): Add keymaps for TeVii and TBS USB DVB-S/S2 cardsIgor M. Liplianin
Add keymaps for TeVii and TBS USB DVB-S/S2 cards Also module parameter named keymap inserted for override default keymap. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11981): Remote control debugging for dw2102 driver based USB cardsIgor M. Liplianin
Remote control debugging for dw2102 driver based USB cards It includes DVBWorld, TeVii, Terratec and others. Type 'modprobe dvb-usb-dw2102 debug=4', then look at dmesg output. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11979): em28xx: don't create audio device if not supportedDevin Heitmueller
In cases where the device does not actually provide a USB audio class *or* vendor audio, do not load the driver that provides vendor audio support (such as the KWorld 2800d). Otherwise, the /dev/audio1 device file gets created and users get confused. Also, reworks the logic a bit so that we don't try to inspect the register content if the register read failed entirely. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11977): em28xx: Add Kworld 315 entryFranklin Meng
Added an entry for Kworld 315 (for while, dvb only) Signed-off-by: Franklin Meng <fmeng2002@yahoo.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11976): em28xx: set up tda9887_conf in em28xx_card_setup()Franklin Meng
Added tda9887_conf set up into em28xx_card_setup() Signed-off-by: Franklin Meng <fmeng2002@yahoo.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11973): gspca - ov534: Do the ov772x work again.Jean-Francois Moine
The scan of the image packets of the sensor ov772x was broken when the sensor ov965x was added. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11972): gspca - main: Skip disabled controls.Hans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11971): gspca - doc: Add the 05a9:a518 webcam to the Documentation.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11970): gspca - ov519: Add support for the ov518 bridge.Hans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11969): gspca - spca505: Reinitialize the webcam at resume time.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 driversHans Verkuil
Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11966): ov511: Fix unit_video parameter behaviorMauro Carvalho Chehab
Fix a regression caused by changeset 9133:64aed7485a43 - v4l: disconnect kernel number from minor Before the above changeset, ov511_probe used to allow forcing to use a certain specific set of video devices, like: modprobe ov511 unit_video=4,1,3 num_uv=3 So, assuming that you have 5 ov511 devices, and connect they one by one, they'll gain the following device numbers (at the connection order): /dev/video4 /dev/video1 /dev/video3 /dev/video0 /dev/video2 However, this was changed due to this change at video_register_device(): + nr = find_next_zero_bit(video_nums[type], minor_cnt, nr == -1 ? 0 : nr); With the previous behavior, a trial to register on an already allocated mirror would fail, and a loop would get the next requested minor. However, the current behavior is to get the next available minor instead of failing. Due to that, this means that the above modprobe parameter will give, instead: /dev/video5 /dev/video6 /dev/video7 /dev/video8 /dev/video9 In order to restore the original behavior, a static var were added, storing the amount of already registered devices. While there, it also fixes the locking of the probe/disconnect functions. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11964): b2c2: Fix problems with frontend attachmentTrent Piepho
The frontend attachment code didn't handle cases where the frontend partially failed to attach. For instance, when the demod was attached successfully but the tuner driver wasn't compiled or fails to init for some reason. In these cases we try to clean up the partial attachment and fail instead of proceeding with a broken frontend. If frontend registration fails, clean up with dvb_frontend_detach() rather than just calling the frontend's main release method. The former does some additional stuff, like release an attached tuner and take care of putting symbols when dynamic binding is used. In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that gets set before skystar2_rev23_attach() is called. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11962): dvb: Fix broken link in get_dvb_firmware for nxt2004 (A180)Jan Ceuleers
Due to a reorganisation of AVermedia's websites, get_dvb_firmware no longer works for nxt2004. Fix it. Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11961): tvp514x: try_count off by oneRoel Kluin
With `while (try_count-- > 0)' try_count reaches -1 after the loop. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11960): v4l: generate KEY_CAMERA instead of BTN_0 key events on ↵Lennart Poettering
input devices A bunch of V4L drivers generate BTN_0 instead of KEY_CAMERA key presses. X11 is able to handle KEY_CAMERA automatically these days while BTN_0 is not treated at all. Thus it would be of big benefit if the camera drivers would consistently generate KEY_CAMERA. Some drivers (uvc) already do, this patch updates the remaining drivers to do the same. I only possess a limited set of webcams, so this isn't tested with all cameras. The patch is rather trivial and compile tested, so I'd say it's still good enough to get merged. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11959): se401: Fix unsafe use of sprintf with identical ↵Alan Cox
source/destination Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13435 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11958): usbvision-core.c: vfree does its own NULL checkFigo.zhang
vfree() does it's own NULL checking,so no need for check before calling it. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11957): dsbr100: change radio->muted to radio->status, update ↵Alexey Klimov
suspend/resume Patch renames radio->muted to radio->status, add defines for that variable, and fixes suspend/resume procedure. Radio->status set to STOPPED in usb_dsbr100_probe because of removing open call. Also, patch increases driver version. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11956): dsbr100: no need to pass curfreq value to dsbr100_setfreq()Alexey Klimov
Small cleanup of dsbr100_setfreq(). No need to pass radio->curfreq value to this function. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11955): dsbr100: remove usb_dsbr100_open/close callsAlexey Klimov
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11954): dsbr100: remove radio->users counterAlexey Klimov
Patch removes radio->users counter because it is not in use. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11953): videobuf-dma-sg: return -ENOMEM if vmalloc failsFigo.zhang
it is better return -ENOMEM than -EIO Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11951): cx18: Add DVB-T support for the Leadtek WinFast DVR3100 HAndy Walls
This adds support for DVB-T on the Leadtek DVR3100 H and should also get analog TV capture from the tuner working properly as well. DVB-T 6 MHz and 8 MHz have been tested and verified to work by Terry Wu of Leadtek. DVB-T 7 MHz has also been verified working with a change developed by Terry to the tuner-xc2028.c driver. Special thanks go to Terry Wu <terrywu2009@gmail.com> of Leadtek who provided the needed information and testing to get digital TV working for the Leadtek DVR3100 H. Reported-by: Terry Wu <terrywu2009@gmail.com> Tested-by: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11950): cx18: Split LeadTek PVR2100 and DVR3100 H into 2 separate ↵Andy Walls
card entries Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11948): uvcvideo: Ignore non-UVC trailing interface descriptors.Laurent Pinchart
Herton Ronaldo Krzesinski from Mandriva reported that one Bison Electronics webcam exposes a non-UVC interface descriptor. Instead of failing completely, ignore trailing non-UVC descriptors and move on. Thanks to Herton for reporting the problem and submitting a patch proposal. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11947): uvcvideo: Add support for FSC V30S webcamsLaurent Pinchart
The FSC WebCam V30S (18ec:3288) requires the MINMAX quirk. Add a corresponding entry in the device IDs list. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11946): uvcvideo: Add support for Aveo Technology webcamsLaurent Pinchart
The Aveo Technology USB 2.0 Camera (1871:0306) requires the PROBE_EXTRAFIELDS quirk. Add a corresponding entry in the device IDs list. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11945): uvcvideo: Don't accept to change the format when buffers ↵Laurent Pinchart
are allocated. Setting a new frame format or size will likely change the buffer size required to store a complete video frame. To avoid a buffer overflow, don't allow VIDIOC_S_FMT calls when video buffers are already allocated. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11944): uvcvideo: Add generic control blacklist.Laurent Pinchart
Another device (5986:0241) has been reported to advertise a UVC control it does not support. Rework the control blacklist to match devices by their VID:PID instead of trying to be clever about which controls might not be supported properly. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11942): gspca - m5602-ov9650: Reorder quirk list and add A7V quirkErik Andrén
The quirk list has grown and was in need of sorting. This is now done. Add a new vflip quirk for the ASUS A7V while we're at it. Thanks to Carsten Menzel for reporting. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11941): gspca - m5602-ov9650: Add vflip quirk for the ASUS A6VAErik Andrén
Add vflip quirk for the ASUS A6VA. Thanks to Salvo Di Rosa for reporting. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11940): gspca - m5602-s5k4aa: Add vflip quirk for the Lenovo Y300Erik Andrén
The Lenovo Y300 has its sensor upside down. Quirk it to gain normal functionality. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11938): big rework of TS for saa7134Dmitri Belimov
1. Add start/stop TS function. 2. Move setup DMA of TS to DMA function. 3. Write support cupture via MMAP 4. Rework startup and finish process, remove simple FSM. Tested-by: Hermann Pitton <hermann-pitton@arcor.de> Tested-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11937): vino: replace dma_sync_single with dma_sync_single_for_cpuFUJITA Tomonori
This replaces dma_sync_single() with dma_sync_single_for_cpu() because dma_sync_single() is an obsolete API; include/linux/dma-mapping.h says: /* Backwards compat, remove in 2.7.x */ Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-22 09:25:27 +0000