aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-23perf_events: Fix style nitsPeter Zijlstra
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091123103819.613427378@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23perf_events: Undo copy/paste damagePeter Zijlstra
We had two almost identical functions, avoid the duplication. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091123103819.537537928@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23perf_events: Optimize the swcounter hotpathIngo Molnar
The structure init creates a bit memcpy, which shows up big time in perf annotate output: : ffffffff810a859d <__perf_sw_event>: 1.68 : ffffffff810a859d: 55 push %rbp 1.69 : ffffffff810a859e: 41 89 fa mov %edi,%r10d 0.01 : ffffffff810a85a1: 49 89 c9 mov %rcx,%r9 0.00 : ffffffff810a85a4: 31 c0 xor %eax,%eax 1.71 : ffffffff810a85a6: b9 16 00 00 00 mov $0x16,%ecx 0.00 : ffffffff810a85ab: 48 89 e5 mov %rsp,%rbp 0.00 : ffffffff810a85ae: 48 83 ec 60 sub $0x60,%rsp 1.52 : ffffffff810a85b2: 48 8d 7d a0 lea -0x60(%rbp),%rdi 85.20 : ffffffff810a85b6: f3 ab rep stos %eax,%es:(%rdi) None of the callees depends on the structure being pre-initialized, so only initialize ->addr. This gets rid of the memcpy overhead. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23perf events: Do not generate function trace entries in perf codeIngo Molnar
Decreases perf overhead when function tracing is enabled, by about 50%. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23perf record, x86: Print more intelligent error message when sampling failsSimon Kaempflein
Print more accurate error message when "perf record" fails because there is no APIC support, on x86. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23perf: Use default compiler mode by defaultMichael S. Tsirkin
gcc with no flags typically is a sane default for systems to use, and looking at the running kernel is probably broken for cross-builds anyway, so let's not do this. Add EXTRA_CFLAGS so that users can override default gcc mode if they want to. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091122121335.GA24254@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22perf report: Do map lookups in resolve_callchain()Arnaldo Carvalho de Melo
Bug introduced in 439d473b4777de510e1322168ac6f2f377ecd5bc, making the initial map be used for all IPs, so that symbols outside this initial map would either be erroneously resolved or not resolve at all. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258909162-28496-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22perf symbols: Show messages about module loading only if verbose >= 1Arnaldo Carvalho de Melo
Suggested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258903301-20584-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22perf tools: Suggest static libraries as wellMichael S. Tsirkin
On error, suggest installing static libraries along with shared libraries. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091122131311.GA24318@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22perf tools: Add V=2 option to help debug config issuesMichael S. Tsirkin
Make standard error show up on console when V=2 is set. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091122112726.GC13644@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22perf_events: Fix modular buildIngo Molnar
Fix: ERROR: "perf_swevent_put_recursion_context" [fs/ext4/ext4.ko] undefined! ERROR: "perf_swevent_get_recursion_context" [fs/ext4/ext4.ko] undefined! Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22perf symbols: Fix ELF header errors during "perf kmem record"Pekka Enberg
The write_event() function in builtin-record.c writes out all mmap()'d DSOs including non-ELF files like GNOME resource files and such. Therefore, check for ELF_K_ELF in filename__read_build_id() before attempting to read the ELF header with gelf_getehdr(). Fixes the following error messages when running "perf kmem record": penberg@penberg-laptop:~/src/linux/tools/perf$ perf kmem record ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.753 MB perf.data (~32885 samples) ] filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1258885784-11709-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22perf kmem: Add --sort hit and --sort fragPekka Enberg
This patch adds support for "--sort hit" and "--sort frag" to the "perf kmem" tool. The former was already mentioned in the help text and the latter is useful for finding call-sites that exhibit worst case behavior for SLAB allocators. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: linux-mm@kvack.org <linux-mm@kvack.org> LKML-Reference: <1258883880-7149-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22perf_event: Remove redundant zero fillMárton Németh
The buffer is first zeroed out by memset(). Then strncpy() is used to fill the content. The strncpy() function also pads the string till the end of the specified length, which is redundant. The strncpy() does not ensures that the string will be properly closed with 0. Use strlcpy() instead. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression buffer; expression size; expression str; @@ memset(buffer, 0, size); ... - strncpy( + strlcpy( buffer, str, sizeof(buffer) ); @@ expression buffer; expression size; expression str; @@ memset(&buffer, 0, size); ... - strncpy( + strlcpy( &buffer, str, sizeof(buffer)); @@ expression buffer; identifier field; expression size; expression str; @@ memset(buffer, 0, size); ... - strncpy( + strlcpy( buffer->field, str, sizeof(buffer->field) ); @@ expression buffer; identifier field; expression size; expression str; @@ memset(&buffer, 0, size); ... - strncpy( + strlcpy( buffer.field, str, sizeof(buffer.field)); // </smpl> On strncpy() vs strlcpy() see http://www.gratisoft.us/todd/papers/strlcpy.html . Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B086547.5040100@freemail.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22hw-breakpoints: Separate the kernel part from breakpoint headersFrederic Weisbecker
So that we can include this header from userspace tools, like perf tools, to get the breakpoint types and len definitions. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258863695-10464-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22hw-breakpoints: Remove x86 specific headers from core fileFrederic Weisbecker
Remove asm/processor.h and asm/debugreg.h as these headers are not used anymore in the hw-breakpoints core file. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258863695-10464-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22tracing: Forget about the NMI buffer for syscall eventsFrederic Weisbecker
We are never in an NMI context when we commit a syscall trace to perf. So just forget about the nmi buffer there. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258863695-10464-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22tracing: Use the perf recursion protection from trace eventFrederic Weisbecker
When we commit a trace to perf, we first check if we are recursing in the same buffer so that we don't mess-up the buffer with a recursing trace. But later on, we do the same check from perf to avoid commit recursion. The recursion check is desired early before we touch the buffer but we want to do this check only once. Then export the recursion protection from perf and use it from the trace events before submitting a trace. v2: Put appropriate Reported-by tag Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf trace: Read_tracing_data should die() another dayArnaldo Carvalho de Melo
It better propagate errors, also if we do a simple: [root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ; perf trace [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ] Fatal: not an trace data file [root@doppio linux-2.6-tip]# That is what is expected, right? I.e. as we didn't specify any tracepoint event via -e, it should gracefully bail out and not SEGFAULT. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258821086-11521-3-git-send-email-acme@infradead.org> [ Fixed the error messages some more ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf symbols: Old versions of elf.h don't have NT_GNU_BUILD_IDArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258821086-11521-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf symbols: Fixup kernel_maps__fixup_end end mapArnaldo Carvalho de Melo
We better call this routine after both the kernel and modules are loaded, because as it was if there weren't modules it would not be called, resulting in kernel_map->end remaining at zero, so no map would be found and consequently the kernel symtab wouldn't get loaded, i.e. no kernel symbols would be resolved. Also this fixes another case, that is when we _have_ modules, but the last map would have its ->end address not set before we loaded its symbols, which would never happen because ->end was not set. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258821086-11521-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf_events: Fix default watermark calculationStephane Eranian
This patch fixes the default watermark value for the sampling buffer. With the existing calculation (watermark = max(PAGE_SIZE, max_size / 2)), no notification was ever received when the buffer was exactly 1 page. This was because you would never cross the threshold (there is no partial samples). In certain configuration, there was no possibilty detecting the problem because there was not enough space left to store the LOST record.In fact, there may be a more generic problem here. The kernel should ensure that there is alaways enough space to store one LOST record. This patch sets the default watermark to half the buffer size. With such limit, we are guaranteed to get a notification even with a single page buffer assuming no sample is bigger than a page. Signed-off-by: Stephane Eranian <eranian@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.344964101@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1256302576-6169-1-git-send-email-eranian@gmail.com>
2009-11-21perf: Fix locking for PERF_FORMAT_GROUPPeter Zijlstra
We should hold event->child_mutex when iterating the inherited counters, we should hold ctx->mutex when iterating siblings. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.251030114@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Fix event scaling for inherited countersPeter Zijlstra
Properly account the full hierarchy of counters for both the count (we already did so) and the scale times (new). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.153379276@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Fix time lockingPeter Zijlstra
Most sites updating ctx->time and event times do so under ctx->lock, make sure they all do. This was made possible by removing the __perf_event_read() call from __perf_event_sync_stat(), which already had this lock taken. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.102316434@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Simplify __perf_event_readPeter Zijlstra
cpuctx is always active, task context is always active for current the previous condition verifies that if its a task context its for current, hence we can assume ctx->is_active. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.000272254@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Simplify __perf_event_sync_statPeter Zijlstra
Removes constraints from __perf_event_read() by leaving it with a single callsite; this callsite had ctx->lock held, the other one does not. Removes some superfluous code from __perf_event_sync_stat(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.918544317@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Optimize __perf_event_read()Peter Zijlstra
Both callers actually have IRQs disabled, no need doing so again. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.863685796@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Optimize perf_event_task_sched_outPeter Zijlstra
Remove an update_context_time() call from the perf_event_task_sched_out() path and into the branch its needed. The call was both superfluous, because __perf_event_sched_out() already does it, and wrong, because it was done without holding ctx->lock. Place it in perf_event_sync_stat(), which is the only place it is needed and which does already hold ctx->lock. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.779516394@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Fix PERF_FORMAT_GROUP scale infoPeter Zijlstra
As Corey reported, the total_enabled and total_running times could occasionally be 0, even though there were events counted. It turns out this is because we record the times before reading the counter while the latter updates the times. This patch corrects that. While looking at this code I found that there is a lot of locking iffyness around, the following patches correct most of that. Reported-by: Corey Ashford <cjashfor@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.685559857@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Optimize perf_event_mmap_ctx()Peter Zijlstra
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.606459548@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Optimize perf_event_comm_ctx()Peter Zijlstra
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.527608793@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Optimize perf_event_task_ctx()Peter Zijlstra
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.452227115@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Optimize perf_swevent_ctx_event()Peter Zijlstra
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.378188589@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Optimize some swcounter attr.sample_period==1 pathsPeter Zijlstra
Avoid the rather expensive perf_swevent_set_period() if we know we have to sample every single event anyway. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.299508332@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf: Allow for custom overflow handlersPeter Zijlstra
in-kernel perf users might wish to have custom actions on the sample interrupt. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.222339539@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf symbols: Change the kernel DSO name if it comes from kallsymsArnaldo Carvalho de Melo
So that the user have a clearer indication about the source of the symbols, as we only state buildid mismatches in verbose mode, because 'perf top' would overwrite such warning anyway. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-6-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf symbols: Check vmlinux buildidArnaldo Carvalho de Melo
E.g.: [root@doppio linux-2.6-tip]# perf top -v --vmlinux ../build/tip/vmlinux > /dev/null build_id in vmlinux is e96699725a47413a50c231864a8e7a8ced40a31b while expected is 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a, ignoring it I.e. perf top was told to use a vmlinux file that is not the one currently running on the machine, it ignores it and falls back to using /proc/kallsyms. This solves many, at first, mysterious results when people have a stale vmlinux file while keeping the default of trying to use the vmlinux file in the current directory in things like 'perf annotate' where the DWARF info is required and thus we can't use just /proc/kallsyms. Modules buildids are already being checked as of the previous changeset in this series, because we are using the default dso__load routine, that will look at a series of places looking for the best file with a matching buildid, starting in the -debuginfo directories. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-5-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf symbols: Do lazy symtab loading for the kernel & modules tooArnaldo Carvalho de Melo
Just like we do with the other DSOs. This also simplifies the kernel_maps setup process, now all that the tools need to do is to call kernel_maps__init and the maps for the modules and kernel will be created, then, later, when kernel_maps__find_symbol() is used, it will also call maps__find_symbol that already checks if the symtab was loaded, loading it if needed. Now if one does 'perf top --hide_kernel_symbols' we won't pay the price of loading the (many) symbols in /proc/kallsyms or vmlinux. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf symbols: Introduce dso__build_id_equalArnaldo Carvalho de Melo
Will be used in more places. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-3-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf symbols: Filename__read_build_id should look at .notes section tooArnaldo Carvalho de Melo
In the kernel we have more than one notes section, so the linker script combines all and puts them into a ".notes" combined section. So we need to look at both sections and also traverse them looking at multiple GElf_Nhdr entries till we find the one we want, with the build_id. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21perf symbols: Remove unrelated actions from dso__load_kernel_symArnaldo Carvalho de Melo
It should just load kernel symbols, not load the list of modules. There are more stuff to move to other routines, but lets do it in several steps. End goal is to be able to defer symbol table loading till we find a hit for that map address range. So that the kernel & modules are handled just like all the other DSOs in the system. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21Merge branch 'tracing/hw-breakpoints' into perf/coreIngo Molnar
Conflicts: arch/x86/kernel/kprobes.c kernel/trace/Makefile Merge reason: hw-breakpoints perf integration is looking good in testing and in reviews, plus conflicts are mounting up - so merge & resolve. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-21Merge branch 'perf/urgent' into perf/coreIngo Molnar
Conflicts: tools/perf/util/symbol.c Merge reason: this fix will get merged in .33, not .32, plus resolve the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-20perf: Add 'perf kmem' toolLi Zefan
This tool is mostly a perf version of kmemtrace-user. The following information is provided by this tool: - the total amount of memory allocated and fragmentation per call-site - the total amount of memory allocated and fragmentation per allocation - total memory allocated and fragmentation in the collected dataset - ... Sample output: # ./perf kmem record ^C # ./perf kmem --stat caller --stat alloc -l 10 ------------------------------------------------------------------------------ Callsite | Total_alloc/Per | Total_req/Per | Hit | Fragmentation ------------------------------------------------------------------------------ 0xc052f37a | 790528/4096 | 790528/4096 | 193 | 0.000% 0xc0541d70 | 524288/4096 | 524288/4096 | 128 | 0.000% 0xc051cc68 | 481600/200 | 481600/200 | 2408 | 0.000% 0xc0572623 | 297444/676 | 297440/676 | 440 | 0.001% 0xc05399f1 | 73476/164 | 73472/164 | 448 | 0.005% 0xc05243bf | 51456/256 | 51456/256 | 201 | 0.000% 0xc0730d0e | 31844/497 | 31808/497 | 64 | 0.113% 0xc0734c4e | 17152/256 | 17152/256 | 67 | 0.000% 0xc0541a6d | 16384/128 | 16384/128 | 128 | 0.000% 0xc059c217 | 13120/40 | 13120/40 | 328 | 0.000% 0xc0501ee6 | 11264/88 | 11264/88 | 128 | 0.000% 0xc04daef0 | 7504/682 | 7128/648 | 11 | 5.011% 0xc04e14a3 | 4216/191 | 4216/191 | 22 | 0.000% 0xc05041ca | 3524/44 | 3520/44 | 80 | 0.114% 0xc0734fa3 | 2104/701 | 1620/540 | 3 | 23.004% 0xc05ec9f1 | 2024/289 | 2016/288 | 7 | 0.395% 0xc06a1999 | 1792/256 | 1792/256 | 7 | 0.000% 0xc0463b9a | 1584/144 | 1584/144 | 11 | 0.000% 0xc0541eb0 | 1024/16 | 1024/16 | 64 | 0.000% 0xc06a19ac | 896/128 | 896/128 | 7 | 0.000% 0xc05721c0 | 772/12 | 768/12 | 64 | 0.518% 0xc054d1e6 | 288/57 | 280/56 | 5 | 2.778% 0xc04b562e | 157/31 | 154/30 | 5 | 1.911% 0xc04b536f | 80/16 | 80/16 | 5 | 0.000% 0xc05855a0 | 64/64 | 36/36 | 1 | 43.750% ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ Alloc Ptr | Total_alloc/Per | Total_req/Per | Hit | Fragmentation ------------------------------------------------------------------------------ 0xda884000 | 1052672/4096 | 1052672/4096 | 257 | 0.000% 0xda886000 | 262144/4096 | 262144/4096 | 64 | 0.000% 0xf60c7c00 | 16512/128 | 16512/128 | 129 | 0.000% 0xf59a4118 | 13120/40 | 13120/40 | 328 | 0.000% 0xdfd4b2c0 | 11264/88 | 11264/88 | 128 | 0.000% 0xf5274600 | 7680/256 | 7680/256 | 30 | 0.000% 0xe8395000 | 5948/594 | 5464/546 | 10 | 8.137% 0xe59c3c00 | 5748/479 | 5712/476 | 12 | 0.626% 0xf4cd1a80 | 3524/44 | 3520/44 | 80 | 0.114% 0xe5bd1600 | 2892/482 | 2856/476 | 6 | 1.245% ... | ... | ... | ... | ... ------------------------------------------------------------------------------ SUMMARY ======= Total bytes requested: 2333626 Total bytes allocated: 2353712 Total bytes wasted on internal fragmentation: 20086 Internal fragmentation: 0.853375% TODO: - show sym+offset in 'callsite' column - show cross node allocation stats - collect more useful stats? - ... Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: linux-mm@kvack.org <linux-mm@kvack.org> LKML-Reference: <4B064AF5.9060208@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-19x86: Instruction decoder test should generate build warningMasami Hiramatsu
Since some instructions are not decoded correctly by older versions of objdump, it may cause false positive error in insn decoder posttest. This changes build error of insn decoder test to build warning. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20091116230631.5250.41579.stgit@harusame> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-19perf tools: Don't die() in mmap_dispatch_perf_fileArnaldo Carvalho de Melo
Propagate the error, that, interestingly, are already handled by all callers :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258649757-17554-3-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-19perf tools: Eliminate some more die() uses in library functionsArnaldo Carvalho de Melo
This time in perf_header__adds_write, propagating the do_write error returns. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258649757-17554-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-19perf tools: perf_header__read() shouldn't die()Arnaldo Carvalho de Melo
And also don't call the constructor in it, this way it adheres to the model the other methods follow. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258649757-17554-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-19perf symbols: Capture the running kernel buildid tooArnaldo Carvalho de Melo
[root@doppio linux-2.6-tip]# perf record -a -f sleep 3s ; perf buildid-list | grep vmlinux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.171 MB perf.data (~7489 samples) ] 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a vmlinux [root@doppio linux-2.6-tip]# Several refactorings were needed so that we can have symmetry between dsos__load_modules() and dsos__load_kernel(), i.e. those functions will respectively create and add to the dsos list the loaded modules and kernel, with its buildids, but not load its symbols. That is something the subcomands that need will have to call dso__load_kernel_sym(), just like we do with modules with dsos__load_module_sym()/dso__load_module_sym(). Next csets will actually use this info to stop producing bogus results using mismatched vmlinux and .ko files. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258582853-8579-4-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 03:19:50 +0000