aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-05cfg80211: add a regulatory debug printLuis R. Rodriguez
Instead of sprinkling code with ifdef's define REG_DBG_PRINT() instead. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05mwl8k: update version number to 0.11Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05mac80211: fix ieee80211_change_mac() to use struct sockaddrKalle Valo
Setting the mac address from user space was buggy. For example, when executing this command: ip link set wlan0 address 00:1f:df:88:cd:55 mac80211 used the address 01:00:00:1f:df:88 instead. It was shifted two bytes. The reason was that the addr (type of void *) provided to ieee80211_change_mac() is actually of type struct sockaddr, not just the mac address array. Also the call to eth_mac_addr() expects the address to be struct sockaddr. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05mac80211: fix a warning related to pointer conversion to u64 cookieKalle Valo
On a 32 bit system (in this case an omap 3430 system) gcc warned about pointer conversion: net/mac80211/work.c: In function 'ieee80211_remain_on_channel_timeout': net/mac80211/work.c:534: warning: cast from pointer to integer of different size net/mac80211/work.c: In function 'ieee80211_remain_done': net/mac80211/work.c:1030: warning: cast from pointer to integer of different size net/mac80211/work.c: In function 'ieee80211_wk_remain_on_channel': net/mac80211/work.c:1056: warning: cast from pointer to integer of different size net/mac80211/work.c: In function 'ieee80211_wk_cancel_remain_on_channel': net/mac80211/work.c:1072: warning: cast from pointer to integer of different size Fix it by casting the pointers to unsigned long instead. This makes the compiler happy again. Compile-tested only. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05mac80211: No need to include WEXT headers hereJouni Malinen
Remove the forgotten linux/wireless.h inclusion from mac80211. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05iwlwifi: remove linux/utsrelease.h dependencyZhu Yi
Commit 250cce26d5d03337aec4ff8405121f026adb4a89 uses UTS_RELEASE as the the in-tree iwlwifi driver version. However the inclusion of generated/utsrelease.h makes it a unpleasant behaviour to recompile the driver everytime when utsrelease.h is updated. In fact, the driver module is already built with the UTS_RELEASE information via vermagic of modinfo. Mark the in-tree driver with the version string "in-tree" to distinguish with those old out-of-tree drivers. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05rt2x00: Properly request tx headroom for alignment operations.Gertjan van Wingerde
Current rt2x00 drivers may result in a "ieee80211_tx_status: headroom too small" error message when a frame needs to be properly aligned before transmitting it. This is because the space needed to ensure proper alignment isn't requested from mac80211. Fix this by adding sufficient amount of alignment space to the amount of headroom requested for TX frames. Reported-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05mac80211: fix skb buffering issueJohannes Berg
Since I removed the master netdev, we've been keeping internal queues only, and even before that we never told the networking stack above the virtual interfaces about congestion. This means that packets are queued in mac80211 and the upper layers never know, possibly leading to memory exhaustion and other problems. This patch makes all interfaces multiqueue and uses ndo_select_queue to put the packets into queues per AC. Additionally, when the driver stops a queue, we now stop all corresponding queues for the virtual interfaces as well. The injection case will use VO by default for non-data frames, and BE for data frames, but downgrade any data frames according to ACM. It needs to be fleshed out in the future to allow chosing the queue/AC in radiotap. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org [2.6.32] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05rt2x00: Fix LED configuration setting for rt2800.Gertjan van Wingerde
rt2800_blink_set uses an illegal value to set the LED_CFG_G_LED_MODE field of the LED_CFG register. This field is only 2 bits large, so should be initialized with value that fits. Use default value from the vendor driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-05rt2x00: use correct headroom for transmissionPavel Roskin
Use rt2x00dev->ops->extra_tx_headroom, not rt2x00dev->hw->extra_tx_headroom in the tx code, as the later may include other headroom not to be used in the chipset driver. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04cfg80211: fix syntax error on user regulatory hintsLuis R. Rodriguez
This fixes a syntax error when setting up the user regulatory hint. This change yields the same exact binary object though so it ends up just being a syntax typo fix, fortunately. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04ath5k: Fix eeprom checksum check for custom sized eepromsLuis R. Rodriguez
Commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5 enabled EEPROM checksum checks to avoid bogus bug reports but failed to address updating the code to consider devices with custom EEPROM sizes. Devices with custom sized EEPROMs have the upper limit size stuffed in the EEPROM. Use this as the upper limit instead of the static default size. In case of a checksum error also provide back the max size and whether or not this was the default size or a custom one. If the EEPROM is busted we add a failsafe check to ensure we don't loop forever or try to read bogus areas of hardware. This closes bug 14874 http://bugzilla.kernel.org/show_bug.cgi?id=14874 Cc: stable@kernel.org Cc: David Quan <david.quan@atheros.com> Cc: Stephen Beahm <stephenbeahm@comcast.net> Reported-by: Joshua Covington <joshuacov@googlemail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04zd1211rw: Fix multicast filtering.Benoit Papillault
If multicast parameter (as returned by zd_op_prepare_multicast) has changed, no bit in changed_flags is set. To handle this situation, we do not return if changed_flags is 0. If we do so, we will have some issue with IPv6 which uses multicast for link layer address resolution. Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04iwl: off by one bugDan Carpenter
tid is used as an array offset. agg = &priv->stations[sta_id].tid[tid].agg; iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); It should be limitted to MAX_TID_COUNT - 1; struct iwl_tid_data tid[MAX_TID_COUNT]; regards, dan carpenter Signed-off-by: Dan Carpenter <error27@gmail.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04mwl8k: fix configure_filter() memory leak on errorLennert Buytenhek
If there was an error acquiring the firmware lock in mwl8k_configure_filter(), we would end up leaking the multicast command packet prepared by mwl8k_prepare_multicast(). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04ath9k: fix ito64Ming Lei
The unit of sizeof() is byte instead of bit, so fix it. The patch can fix debug output of some dma_addr_t variables. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04ath9k: Fix Kconfig depends for ATH9K_DEBUGFSDominik Geyer
Add missing DEBUG_FS dependency for ATH9K_DEBUGFS in ath9k's Kconfig. Signed-off-by: Dominik D. Geyer <dominik.geyer@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04mac80211: fix typo added by "mac80211: fix propagation of failed..."John W. Linville
'Typo: it's "Hardware", not "Harware". Hmm, sometimes it's hairware :-)"' -- Holger Schurig Reported-by: Holger Schurig <holgerschurig@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-04wl1271: fix timeout in wl1271_top_reg_readJuha Leppanen
I noticed a timeout bug in /drivers/net/wireless/wl12xx/wl1271_spi.c In the current code you cannot tell why you exited the "poll for data ready" do-while loop if exiting was done after the last possible loop. Then timeout==0 regardless of (val & OCP_READY_MASK) or !(val & OCP_READY_MASK), leading to possible false timeout... Simple correction could be decreasing timeout after checking for !(val & OCP_READY_MASK), not before (Manually converted from email to an actual patch by me. -- JWL) Reported-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/net/wireless/libertas/scan.c
2009-12-29Revert "b43: Enforce DMA descriptor memory constraints"John W. Linville
This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: annotate sleeping driver opsKalle Valo
To make it easier to notice cases of calling sleeping ops in atomic context, annotate driver-ops.h with appropiate might_sleep() calls. At the same time, also document in mac80211.h the op functions with missing contexts. mac80211 doesn't seem to use get_tx_stats anywhere currently. Just to be on the safe side, I documented it to be atomic, but hopefully the op can be removed in the future. Compile-tested only. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: remove requeue from workJohannes Berg
There's no need to be requeueing the work struct since we check for the scan after removing items due to possible timeouts. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: remove struct ieee80211_if_init_confJohannes Berg
All its members (vif, mac_addr, type) are now available in the vif struct directly, so we can pass that instead of the conf struct. I generated this patch (except the mac80211 and header file changes) with this semantic patch: @@ identifier conf, fn, hw; type tp; @@ tp fn(struct ieee80211_hw *hw, -struct ieee80211_if_init_conf *conf) +struct ieee80211_vif *vif) { <... ( -conf->type +vif->type | -conf->mac_addr +vif->addr | -conf->vif +vif ) ...> } Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211/cfg80211: add station eventsJohannes Berg
When, for instance, a new IBSS peer is found, userspace wants to be notified. Add events for all new stations that mac80211 learns about. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: make off-channel work genericJohannes Berg
This changes mac80211 to allow being off-channel for any type of work, not just the 'remain-on-channel' work. This also helps fast transition to a BSS on a different channel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: support remain-on-channel commandJohannes Berg
This implements the new remain-on-channel cfg80211 command in mac80211, extending the work interface. Also change the work purge code to be able to clean up events properly (pretending they timed out.) Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28cfg80211: add remain-on-channel commandJouni Malinen
Add new commands for requesting the driver to remain awake on a specified channel for the specified amount of time (and another command to cancel such an operation). This can be used to implement userspace-controlled off-channel operations, like Public Action frame exchange on another channel than the operation channel. The off-channel operation should behave similarly to scan, i.e. the local station (if associated) moves into power save mode to request the AP to buffer frames for it and then moves to the other channel to allow the off-channel operation to be completed. The duration parameter can be used to request enough time to receive a response from the target station. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: Generalize off-channel operation helpers from scan codeJouni Malinen
The off-channel operations for going into power save mode (station mode) or stop beaconing (AP/IBSS) are not limited to scanning. Move these into a separate file and allow them to be used for other purposes, too. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: proper bss private data handlingJohannes Berg
cfg80211 offers private data for each BSS struct, which mac80211 uses. However, mac80211 uses internal and external (cfg80211) BSS pointers interchangeably and has a hack to put the cfg80211 bss struct into the private struct. Remove this hack, properly converting between the pointers wherever necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: split up and insert custom IEs correctlyJohannes Berg
Currently, we insert all user-specified IEs before the HT IE for association, and after the HT IE for probe requests. For association, that's correct only if the user-specified IEs are RSN only, incorrect in all other cases including WPA. Change this to split apart the user-specified IEs in two places for association: before the HT IE (e.g. RSN), after the HT IE (generally empty right now I think?) and after WMM (all other vendor-specific IEs). For probes, split the IEs in different places to be correct according to the spec. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: refactor associationJohannes Berg
Refactor the code to reserve an skb of the right size (instead of hoping 200 bytes are enough forever), and also put HT IE generation into an own function. Additionally, put the HT IE before the vendor-specific WMM IE. This still leaves things not quite ordered correctly, due to user-specified IEs, add a note about that for now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: rewrite a few work messagesJohannes Berg
The station we're authenticating/associating with may not always be an AP in the sense that word is mostly understood, so print only the MAC address of the peer instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: generalise work handlingJohannes Berg
In order to use auth/assoc for different purposes other than MLME, it needs to be split up. For other purposes, a generic work handling (potentially on another channel) will be useful. To achieve that, this patch moves much of the MLME work handling out of mlme into a new work API. The API can currently handle probing a specific AP, authentication and association. The MLME previously handled probe/authentication as one step and will continue to do so, but they are separate in the new work handling. Work items are RCU-managed to be able to check for existence of an item for a specific frame in the RX path, but they can be re-used which the MLME right now will do for its combined probe/auth step. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: generalise management work a bitJohannes Berg
As a first step of generalising management work, this renames a few things and puts more information directly into the struct so that auth/assoc need not access the BSS pointer as often -- in fact it can be removed from auth completely. Also since the previous patch made sure a new work item is used for association, we can make the different data a union. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: let cfg80211 manage auth stateJohannes Berg
mac80211 currently hangs on to the auth state by keeping it on the work list. That can lead to confusing behaviour like rejecting scans while authenticated to any AP (but not yet associated.) It also means that it needs to keep track of the work struct while associated for when it gets disassociated (or disassociates.) Change this to free the work struct after the authentication completed successfully and allocate a new one for associating, thereby letting cfg80211 manage the auth state. Another change necessary for this is to tell cfg80211 about all unicast deauth frames sent to mac80211 since now it can no longer check the auth state, but that check was racy anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: introduce flush operationJohannes Berg
We've long lacked a good confirmation that frames have really gone out, e.g. before going off-channel for a scan. Add a flush() operation that drivers can implement to provide that confirmation, and use it in a few places: * before scanning sends the nullfunc frames * after scanning sends the nullfunc frames, if any * when going idle, to send any pending frames Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: add ieee80211_sdata_runningJohannes Berg
Instead of always using netif_running(sdata->dev) use ieee80211_sdata_running(sdata) now which is just an inline containing netif_running() for now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rtl8187: remove priv->modeJohn W. Linville
It is checked in add_interface, but there it is easily replaced with a check of priv->vif. If that information should become necessary, it is available in vif->type anyway. It is also checked in led_turn_on and led_turn_off, where I made the substitutions as described above. Of course, these checks seem to have been incorrect since the driver was using NL80211_IFTYPE_MONITOR to indicate no interface rather than NL80211_IFTYPE_UNSPECIFIED. Anyway, I think these checks may be extraneous...? Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rtl8180: remove priv->modeJohn W. Linville
It is only checked in add_interface, and there it is easily replaced with a check of priv->vif. If that information should become necessary, it is available in vif->type anyway. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Cleanup chip handling helper functions.Gertjan van Wingerde
Let each of them take a struct rt2x00_dev pointer as argument instead of a mixture of struct rt2x00_chip and struct rt2x00_dev pointers. Preparation for further clean ups in the rt2x00 chip handling, especially for rt2800 devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: convert RT2800PCI_PCI and RT2800PCI_SOC Kconfig symbols to booleans.Gertjan van Wingerde
There is no need for Kconfig symbols RT2800PCI_PCI and RT2800PCI_SOC to be tristates, as they are only used to check whether RT2800 PCI or SOC support is to be compiled in. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Let rt2800lib check CONFIG_RT2X00_LIB_USB instead of CONFIG_RT2800USBGertjan van Wingerde
rt2800lib currently checks whether RT2800USB is enabled in the configuration. Strictly speaking this is not necessary, it only needs to know whether the generic rt2x00usb library functions are available. Therefore check for RT2X00_LIB_USB instead. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Fix checks for rt2800 SOC support.Gertjan van Wingerde
Fix checking for SOC support in rt2800pci. The wrong config (an unexisting one) was checked. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wireless: remove CONFIG_WIRELESS_OLD_REGULATORYJohn W. Linville
This is no longer needed with the availability of CONFIG_CFG80211_INTERNAL_REGDB. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Prevent performing "join" before associationJuuso Oikarinen
There is a minor bug in the code causing a "join" to be performed before there is an intention to associate. Fix this. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Check vif for NULL when indicating beacon-lossJuuso Oikarinen
Because the interface is started and the vif are created and destroyed separately, there is a slim possibility beacon-loss indications occur while there is no vif - causing a kernel-oops unless checked. Add checking for the vif. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add support for acx_pm_configJuuso Oikarinen
This acx configures host clock parameters in correspondence with the clock request line - the settling time of the clock, and whether fast wake-up is supported. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Change booleans in struct wl1271 into a flags bitmaskJuuso Oikarinen
For cleaner implementation, change the bunch of booleans in the struct wl1271 structure into a flags bitmask. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Fix supported rate managementJuuso Oikarinen
Previously, only basic rates were used for data transmission - resulting in reduced transfer rates. This patch takes enables the firmware to take advantage of the full set of data rates supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 17:44:14 +0000