aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-24Merge branch 'misc-2.6.33' into releaseLen Brown
2009-12-24Merge branch 'tc1100-wmi' into releaseLen Brown
2009-12-24Merge branch 'sony' into releaseLen Brown
2009-12-24Merge branch 'classmate' into releaseLen Brown
2009-12-24Merge branch 'pdc' into releaseLen Brown
2009-12-24Merge branches 'bugzilla-14446', 'bugzilla-14753' and 'bugzilla-14824' into ↵Len Brown
release
2009-12-24Merge branch 'osc' into releaseLen Brown
2009-12-24classmate-laptop: add support for Classmate PC ACPI devicesThadeu Lima de Souza Cascardo
This add supports for devices like keyboard, backlight, tablet and accelerometer. This work is supported by International Syst S/A. [randy.dunlap@oracle.com: cmpc_acpi: depends on ACPI] [akpm@linux-foundation.org: readability tweaks] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24Merge branch 'sh/g3-prep' into sh/for-2.6.33Paul Mundt
2009-12-24sh: Ensure all PG_dcache_dirty pages are written back.Markus Pietrek
With some of the cache rework an address aliasing optimization was added, but this managed to fail on certain mappings resulting in pages with PG_dcache_dirty set never writing back their dcache lines. This patch reverts to the earlier behaviour of simply always writing back when the dirty bit is set. Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24sh: mach-ecovec24: setup.c detailed correctionKuninori Morimoto
o remove unused define o add device name comment Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24hp-wmi: Fix two memleaksThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.Paul Mundt
ctrl_xxx() is an antiquated SH interface, while __raw_xxx is the standard API that accomplishes the same thing. As such, this converts the remaining sh-sci straggles over, which enables the driver to be wired up for ARM SH-Mobile CPUs as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24serial: sh-sci: earlyprintk zero uartclk fixMagnus Damm
This establishes a sensible max baud rate for the earlyprintk cases where the port's uartclk has not yet been determined. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIASThomas Renninger
Now that we have WMI autoloading the DMI matching is not needed anymore. Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Acked-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24dell-wmi: do not keep driver loaded on unsupported boxesDmitry Torokhov
There is no point in having the driver loaded in memory if we fail to locate particular WMI GUID. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24wmi: Free the allocated acpi objects through wmi_get_event_dataAnisse Astier
These function allocate an acpi object by calling wmi_get_event_data, which then calls acpi_evaluate_object, and it is not freed afterwards. And kernel doc is fixed for parameters of wmi_get_event_data. Signed-off-by: Anisse Astier <anisse@astier.eu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24drivers/platform/x86/acerhdf.c: check BIOS information whether it begins ↵Peter Feuerer
with string of table BIOS information is now checked whether it begins with the strings stored in the BIOS table. Previous method did a strcmp, what lead to problems if BIOS information has appended whitespaces. Signed-off-by: Peter Feuerer <peter@piie.net> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24acerhdf: add new BIOS versionsPeter Feuerer
Add new BIOS versions for following netbooks: Aspire 1810xx, Packard Bell DOTMU. Signed-off-by: Peter Feuerer <peter@piie.net> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24acerhdf: limit modalias matching to supportedStefan Bader
BugLink: https://bugs.launchpad.net/ubuntu/+bug/435958 The module alias currently matches any Acer computer but when loaded the BIOS checks will only succeed on Aspire One models. This causes a invalid BIOS warning for all other models (seen on Aspire 4810T). This is not fatal but worries users that see this message. Limiting the moule alias to models starting with AOA or DOA for Packard Bell. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Peter Feuerer <peter@piie.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24toshiba_acpi: convert to seq_fileAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24asus_acpi: convert to seq_fileAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Karol Kozimor <sziwan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-24ACPI: do not select ACPI_DOCK from ATA_ACPICarlos R. Mafra
In March 2008 commit 0ac4a3c2fbbcadc3e96e4dc47d4ae802d66e6f67 ("ACPI: fix ATA_ACPI build") made CONFIG_ACPI_DOCK be selected by CONFIG_ATA_ACPI because of a build error when CONFIG_ATA_ACPI=y and CONFIG_ACPI_DOCK=m. However, in September 2008 commit 898b054f3eec5921320ae8614b5bdd7b07ea5b43 ("dock: make dock driver not a module") removed the possibility of having CONFIG_ACPI_DOCK=m and therefore there is no need for selecting it when CONFIG_ATA_ACPI=y. This makes the kernel ~5 Kb smaller for people who don't have a dock by allowing them to not have ACPI_DOCK compiled-in because of ATA_ACPI=y. Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-23sony-laptop: enumerate rfkill devices using SN06Mattia Dongili
SN06 makes sure we get back a longer buffer which seems to be necessary going forward as the SNC devices describes more and more devices (or features more precisely). Moreover SN06 should be called with only the descriptor offset to make sure we hit the rfkill controlling function (F124 or F135) with a 0 argument to get a full list of features. Signed-off-by: Mattia Dongili <malattia@linux.it> Tested-by: Miguel Rodríguez Pérez <miguelrp@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-23sony-laptop: rfkill support for newer modelsMattia Dongili
Vaio Type X and possibly other new models use F135 as the radio frequency controlling function attached to the SNC device. In the indexed table this corresponds to 0x0135 (surpise!). Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-23Merge branch 'i2c-fixes' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-omap: OMAP3: Fix I2C lockup during timeout/error cases i2c-omap: Don't write IE state in unidle if 0 i2c-bfin-twi: fix CLKDIV calculation
2009-12-23ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.cTao Ma
In ocfs2_value_metas_in_xattr_header, we should Use le16_to_cpu for ocfs2_extent_list.l_next_free_rec. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-23ocfs2/trivial: Use proper mask for 2 places in hearbeat.cTao Ma
I just noticed today that there are 2 places of "mlog(0,...)" in fs/ocfs2/cluster/heartbeat.c, but actually have no default mask prefix in that file. So change them to mlog(ML_HEARTBEAT,...). Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-23Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.Tristan Ye
For fast symlink, it can be treated the same as inlined files since the data extent we want to return of both case all were stored in metadata block. For symlink, it can be simply treated the same as we did for regular files. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Acked-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-24i2c-omap: OMAP3: Fix I2C lockup during timeout/error casesManjunatha GK
Current OMAP3 I2C driver code does not follow the correct sequence for soft reset. Due to this, lock up issues are reported during timeout/error cases. This patch fixes above issue by disabling I2C controller as per OMAP3430 TRM for soft reset. As per TRM, I2C controller needs to be disabled as a first step during soft reset. Here is correct soft reset sequence: a. Ensure that the module is disabled (clear the I2Ci.I2C_CON[15] I2C_EN bit to 0). b. Set the I2Ci.I2C_SYSC[1] SRST bit to 1. c. Enable the module by setting I2Ci.I2C_CON[15] I2C_EN bit to 1. d. Check the I2Ci.I2C_SYSS[0] RDONE bit until it is set to 1 to indicate the software reset is complete. Tested on Zoom2, Zoom3, 3430SDP and 3630SDP Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: George, Harith<harith@ti.com> Acked-by: Varadarajan, Charu Latha<charu@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-24i2c-omap: Don't write IE state in unidle if 0Cory Maccarrone
Commit ef871432... (i2c-omap: OMAP3: PM: (re)init for every transfer to support off-mode) introduced a change which make the dev->iestate contents be written to the OMAP_I2C_IE_REG every time omap_i2c_unidle is called. Previously, the state was only written if it wasn't equal to zero. In omap_i2c_probe, omap_i2c_unidle() is called prior to omap_i2c_init(), in which case dev->iestate has not yet been initialized and will be set to zero. Having this value written to the registers causes deadlock while booting. As such, this change restores the original functionality. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-24i2c-bfin-twi: fix CLKDIV calculationSonic Zhang
Calculation of the CLKDIV speed setting should be done using base 10 math rather than base 2. We also avoid exceeding the spec due to integer truncation and a 50% duty cycle. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] use resource_size() [WATCHDOG] iTCO_wdt: add PCI ID for the Intel EP80579 (Tolapai) SoC
2009-12-23Revert "x86, ucode-amd: Ensure ucode update on suspend/resume after CPU ↵Linus Torvalds
off/online cycle" This reverts commit 9f15226e75583547aaf542c6be4bdac1060dd425. It's just wrong, and broke resume for Rafael even on a non-AMD CPU. As Rafael says: "... it causes microcode_init_cpu() to be called during resume even for CPUs for which there's no microcode to apply. That, in turn, results in executing request_firmware() (on Intel CPUs at least) which doesn't work at this stage of resume (we have device interrupts disabled, I/O devices are still suspended and so on). If I'm not mistaken, the "if (uci->valid)" logic means "if that CPU is known to us" , so before commit 9f15226e755 microcode_resume_cpu() was called for all CPUs already in the system during suspend, which was the right thing to do. The commit changed it so that the CPUs without microcode to apply are now treated as "unknown", which is not quite right. The problem this commit attempted to solve has to be handled differently." Bisected-and -requested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-23ACPI: fix OSC regression that caused aer and pciehp not to loadShaohua Li
Executing _OSC returns a buffer, which has an acpi object in it. Don't directly returns the buffer, instead, we return the acpi object's buffer. This fixes a regression since caller of acpi_run_osc expects an acpi object's buffer returned. Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits) USB: Fix a bug on appledisplay.c regarding signedness USB: option: support hi speed for modem Haier CE100 USB: audio gadget: free alsa devices when unloading USB: audio gadget: fix wTotalLength calculation usb: otg: isp1301_omap: fix compile error USB: musb: workaround Blackfin FIFO anomalies USB: musb: Fix array index out of bounds issue USB: musb: Fix null pointer dereference issue USB: musb: correct DMA address for tx USB: musb: gadget_ep0: avoid SetupEnd interrupt USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled USB: musb: do not work if no gadget driver is loaded USB: musb: gadget: set otg tranceiver to idle when registering gadget USB: musb: Populate the VBUS GPIO with the correct GPIO number USB: musb: MAINTAINERS: Fix my tree's address USB: musb: fix compiling warning with min() macro USB: musb: move musb_remove to __exit USB: musb_gadget: fix kernel oops in txstate() USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header ...
2009-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: devtmpfs: unlock mutex in case of string allocation error Driver core: export platform_device_register_data as a GPL symbol driver core: Prevent reference to freed memory on error path Driver-core: Fix bogus 0 error return in device_add() Driver core: driver_attribute parameters can often be const* Driver core: bin_attribute parameters can often be const* Driver core: device_attribute parameters can often be const* Doc/stable rules: add new cherry-pick logic vfs: get_sb_single() - do not pass options twice devtmpfs: Convert dirlock to a mutex
2009-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging/vt66*: kconfig, depends on WLAN Staging: batman-adv: introduce missing kfree Staging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET. Staging: panel: Adjust range for PANEL_KEYPAD in Kconfig Staging: panel: Fix compilation error with custom lcd charset Staging: ramzswap: remove ARM specific d-cache hack Staging: rtl8192x: fix printk formats Staging: wlan-ng: fix Correct size given to memset staging: rtl8192su: add USB VID/PID for HWNUm-300 staging: fix rtl8192su compilation errors with mac80211 staging: fix rtl8192e compilation errors with mac80211 Staging: fix rtl8187se compilation errors with mac80211 Staging: rtl8192su: fix test for negative error in rtl8192_rx_isr() Staging: comedi: jr3_pci: Don't ioremap too much space. Check result. Staging: comedi: removed "depricated" from COMEDI_CB_BLOCK Staging: comedi: usbdux.c: fix locking up of the driver when the comedi ringbuffer runs empty Staging: dst: remove from the tree Staging: sm7xx: add a new framebuffer driver Staging: batman: fix debug Kconfig option
2009-12-23Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Set i_nlink properly during reflink. ocfs2: Add reflinked file's inode to inode hash eariler. ocfs2: refcounttree.c cleanup. ocfs2: Find proper end cpos for a leaf refcount block.
2009-12-23SYSCTL: Add a mutex to the page_alloc zone order sysctlAndi Kleen
The zone list code clearly cannot tolerate concurrent writers (I couldn't find any locks for that), so simply add a global mutex. No need for RCU in this case. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-12-23SYSCTL: Print binary sysctl warnings (nearly) only onceAndi Kleen
When printing legacy sysctls print the warning message for each of them only once. This way there is a guarantee the syslog won't be flooded for any sane program. The original attempt at this made the tables non const and stored the flag inline. Linus suggested using a separate hash table for this, this is based on a code snippet from him. The hash implies this is not exact and can sometimes not print a new sysctl due to a hash collision, but in practice this should not be a problem I used a FNV32 hash over the binary string with a 32byte bitmap. This gives relatively little collisions when all the predefined binary sysctls are hashed: size 256 bucket length number 0: [25] 1: [67] 2: [88] 3: [47] 4: [22] 5: [6] 6: [1] The worst case is a single collision of 6 hash values. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-12-23ARM: Fix wrong shared bit for CPU write buffer bug testRussell King
It is unpredictable to have the same memory mapped using different shared bit settings for ARMv6 and ARMv7 CPUs. Fix this for the CPU write buffer bug test. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-23[WATCHDOG] use resource_size()H Hartley Sweeten
Use resource_size(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Kevin Hilman <khilman@ti.deeprootsystems.com> Cc: Ulrik Bech Hald <ubh@ti.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Vincent Sanders <support@simtec.co.uk> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-12-23[WATCHDOG] iTCO_wdt: add PCI ID for the Intel EP80579 (Tolapai) SoCImre Kaloz
add PCI ID for the Intel EP80579 (Tolapai) SoC Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-12-23USB: Fix a bug on appledisplay.c regarding signednesspancho horrillo
brightness status is reported by the Apple Cinema Displays as an 'unsigned char' (u8) value, but the code used 'char' instead. Note that he driver was developed on the PowerPC architecture, where the two types are synonymous, which is not always the case. Fixed that. Otherwise the driver will interpret brightness levels > 127 as negative, and fail to load. Signed-off-by: pancho horrillo <pancho@pancho.name> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: option: support hi speed for modem Haier CE100Donny Kurnia
I made this patch for usbserial driver to add the support for EVDO modem Haier CE100. The bugs report for this is here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/490068 This patch based on these post: http://blankblondtank.wordpress.com/2009/09/04/mengoptimalkan-koneksi-modem-haier-ce-100-cdma-di-linux/ http://tantos.web.id/blogs/how-to-internet-connection-using-cdma-evdo-modem-and-karmic-koala-ubuntu-9-10 I hope this patch can help other that have the Haier C100 modem, mostly in my country, Indonesia. Signed-off-by: Donny Kurnia <donnykurnia@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: audio gadget: free alsa devices when unloadingCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: audio gadget: fix wTotalLength calculationCliff Cai
The wTotalLength should contain the sum of the interface and unit descriptor sizes per the Audio Device Class specification 1.0. Reported-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23usb: otg: isp1301_omap: fix compile errorFelipe Balbi
commit 91c8a5a9985d5bf9c55f6f82f183f57b050b2a3a broke compilation of this driver after it introduced otg_init() as a static inline in <linux/usb/otg.h> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: workaround Blackfin FIFO anomaliesBryan Wu
Some of these workarounds are already in place, but labeled as affecting all BF52x parts. Since we have official anomaly numbers now, use those defines. And since writing to the FIFO has a similar hang issue as reading from the FIFO, implement the workaround there too when necessary. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>