aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-04-06V4L/DVB (11425): gspca - m5602: Move the vflip quirk to probe stage.Erik Andr?n
The vflip quirk is better checked at probe time as it's only needed once. Also add an extra reset at init time to resolve a suspend to ram regression. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11424): gspca - m5602-ov9650: Use the local ctrl cache. Adjust ↵Erik Andr?n
image on vflip. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11423): gspca - m5602-ov9650: Add a disconnect hook, setup a ctrl ↵Erik Andr?n
cache ctrl. Reading and writing to a register doesn't always work reliably. Add a cache and ensure that it is deallocated properly upon module disconnect. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11422): gspca - m5602-ov9650: Replace a magic constant with a defineErik Andr?n
Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11421): gspca - m5602-ov9650: Synthesize modesetting.Erik Andr?n
Previously all resolution setting was done with precalculated tables. When the image is vflipped we need to adjust the alignment which would require another table. Now we can adjust the parameters on the fly instead. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11420): gspca - m5602: Improve error handling in the ov9650 driverErik Andr?n
Some errors were not propagated properly. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11419): gspca - m5602-ov9650: Don't read exposure data from COM1.Erik Andr?n
ov9650: Reading the COM1 register corrupts the image. Decrease the granularity of the exposure and limit its upper range as setting such high values doesn't have any effect on the image. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11418): gspca - m5602-ov9650: Auto white balancing is on by defaultErik Andr?n
Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11417): gspca - m5602-ov9650: Autogain is on by defaultErik Andr?n
Autogain is on by default, properly set the default value in the v4l2 ctrl. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11416): gspca - m5602: Constify all sensor structsErik Andr?n
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11415): gspca - m5602: Remove an unused member in the sd struct.Erik Andr?n
Remove an unused sd struct member. Remove a redundant define while we're at it. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11414): gspca - m5602-mt9m111: Move v4l2 controls to main sensor file.Erik Andr?n
Move over the v4l2 controls to the sensor specific source file. Remove the now redundant sensor struct member. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11413): gspca - m5602-mt9m111: Separate mode vectors per sensor.Erik Andr?n
By separating the supported for each sensor into a separate vector we can eliminate the nmodes variable and instead calculate it at runtime. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11412): gspca - m5602-ov9650: Checkpatch fixesErik Andr?n
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11411): gspca - m5602: Rework v4l ctrl handling in all sensorsErik Andr?n
Previously, all sensors allocated a part of a large ctrl vector. Define this vector separately for each sensor instead. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11410): gspca - m5602-ov9650: Always init the ov9650 before ↵Erik Andr?n
starting a stream This is a hack preventing a suspend-to-ram/disk regression. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11409): gspca - m5602-ov9650: Set the ov9650 sensor in soft sleep ↵Erik Andr?n
when inactive. In order to save energy, put the sensor in soft sleep mode when not active Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11408): gspca - m5602-s5k83a: Add led support to the s5k83a sensor.Lukas Karas
This patch toggles the led seen on many laptops having a m5602 connected to a Samsung s5k83a sensor. Signed-off-by: Lukas Karas <lukas.karas@centrum.cz> Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11407): gspca - m5602-ov9650: Clean up ov9650_start() function.Erik Andr?n
Cleans some unnecessary temporary variable usage in the ov9650 start function. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11406): gspca - m5602-ov9650: Add QCIF resolution supportErik Andr?n
Adds QCIF support for the ov9650 sensor Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11405): gspca - m5602: Simplify error handlingErik Andr?n
Simplfy error handling by replacing goto statements with return equivalents. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11404): gspca - m5602-s5k4aa: Add start function and VGA resolution ↵Erik Andr?n
init. Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11403): gspca - m5602-s5k4aa: No more "default" modeErik Andr?n
Signed-off-by: Erik Andr?n <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11402): gspca - vc032x: Remove the JPEG tables of mi1320_soc.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06Revert "V4L/DVB (10962): fired-avc: fix printk formatting warning."Stefan Richter
Commit 34aecd2851bba5c2b7dae2f0dbe8e629b1c5e4ac was made obsolete and invalid by commit 40cf65d149053889c8876c6c2b4ce204fde55baa. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11398): Support for Legend Silicon LGS8913/LGS8GL5/LGS8GXX China ↵David Wong
DMB-TH digital demodulator This patch contains the unified driver for Legend Silicon LGS8913 and LGS8GL5. It should replace lgs8gl5.c in media/dvb/frontends in the future. Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11393): radio-si470x: fix possible bug with freeing memory orderAlexey Klimov
Patch fixes cleanup procedure in si470x_usb_driver_probe. Add new label err_video and change order of freeing memory. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11392): patch: s2255drv driver removal problem fixedDean Anderson
This patch fixes kfree problem on driver removal, fixes streamoff problem and removes unnecessary videobuf_waiton from free_buffer function. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11392a): Remove reference to obsolete linux-dvb@linuxtv.orgGeert Uytterhoeven
linux-dvb@linuxtv.org auto-responds with: | This ML is deprecated. Please use linux-media@vger.kernel.org instead. | For more info about linux-media@vger.kernel.org, please read: | http://vger.kernel.org/vger-lists.html#linux-media Hence remove it from MAINTAINERS. There are still a few references to it in various docs and source files With kind regards, Geert Uytterhoeven Software Architect Sony Techsoft Centre Europe The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium Phone: +32 (0)2 700 8453 Fax: +32 (0)2 700 8622 E-mail: Geert.Uytterhoeven@sonycom.com Internet: http://www.sony-europe.com/ A division of Sony Europe (Belgium) N.V. VAT BE 0413.825.160 · RPR Brussels Fortis · BIC GEBABEBB · IBAN BE41293037680010 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11391): pci-isa radios: remove open and release functionsAlexey Klimov
Patch removes empty open and release functions in pci and isa radio drivers, setting them to NULL. V4L module doesn't call for them due to previous patch. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11390): 2-dev.c: return 0 for NULL open and release callbacksHans Verkuil
Patch allows v4l2_open and v4l2_release functions return 0 if open and release driver callbacks set to NULL. This will be used in radio drivers. -- Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11387): Sensor orientation reportingAdam Baker
Add support to the SQ-905 driver to pass back to user space the sensor orientation information obtained from the camera during init. Modifies gspca and the videodev2.h header to create the necessary API. [mchehab@redhat.com: Changed "Output is" to "Frames are" at the comments, as suggested at LMML] Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11386): saa7134: Add analog RF tuner support for Avermedia A700 ↵Matthias Schwarzott
DVB-S Hybrid+FM card Thanks to panagonov <panagonov@mail.bg> for requesting support and testing patches. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11381): ivtv/cx18: remove VIDIOC_INT_S_AUDIO_ROUTING debug support.Hans Verkuil
Remove support for the debug call VIDIOC_INT_S_AUDIO_ROUTING from cx18 and ivtv. These internal ioctls shouldn't be exposed. These were only used through the cx18-ctl and ivtv-ctl utilities, and only when testing a new card variant. This cleanup allows the removal of this ioctl from v4l2-common.h. Cc: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11380): v4l2-subdev: change s_routing prototypeHans Verkuil
It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11379): mxb: fix copy-and-paste bug in mute.Hans Verkuil
The line-in was muted twice instead of the line-in and the cd-in. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11377): v4l: increase version numbers of drivers converted to ↵Hans Verkuil
v4l2_subdev. With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11376): tvaudio.h: add static inline to retrieve the list of ↵Hans Verkuil
possible i2c addrs. Rather than duplicating this list everywhere, just put it in tvaudio.h. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11375): v4l2: use v4l2_i2c_new_probed_subdev_addr where appropriate.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11373): v4l2-common: add explicit v4l2_device pointer as first arg ↵Hans Verkuil
to new_(probed)_subdev The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11374): v4l2-common: add v4l2_i2c_new_probed_subdev_addrHans Verkuil
Add utility function to probe for a single address, rather than a list of addresses. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11372): v4l2: use old-style i2c API for kernels < 2.6.26 instead of ↵Hans Verkuil
< 2.6.22 Originally the intention was to switch to the new style i2c API starting with the introduction of the API in 2.6.22. However, the i2c_new_probed_device() function has a lethal bug that wasn't fixed until 2.6.25. Or more accurately, it was only fixed in the stable series of 2.6.25 and 2.6.26. Given the fact that the new i2c API also changed starting with 2.6.26 (the addition of i2c_device_id), it is easiest to switch APIs starting with 2.6.26. This patch updates all the legacy code accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11371): v4l2: remove legacy fields in v4l2-i2c-drv.h.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11369): v4l2-subdev: add load_fw and use that instead of abusing ↵Hans Verkuil
core->init. The init callback was used in several places to load firmware. Make a separate load_fw callback for that. This makes the code a lot more understandable. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11368): v4l2-subdev: move s_standby from core to tuner.Hans Verkuil
s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11367): v4l2-common: remove legacy codeHans Verkuil
Now that all drivers are converted to v4l2_subdev we can remove legacy code in v4l2-common. Also move the documentation of the internal API to v4l2-subdev.h where it really belongs. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11366): v4l: remove obsolete header and sourceHans Verkuil
v4l2-subdev.c and v4l2-i2c-drv-legacy.h were used to support the old i2c API. All v4l drivers are now converted to v4l2_subdev, so these two files can be removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11365): tvaudio: remove i2c legacy codeHans Verkuil
All drivers that use tvaudio now use v4l2_subdev, so we can remove the legacy code from tvaudio. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11364): tuner: remove i2c legacy code.Hans Verkuil
All drivers that use the tuner module now use v4l2_subdev, so we can remove the legacy code from this module. Note that TUNER_SET_CONFIG is still called by tuner-simple.c, so we have to handle it via a .command callback. There must be a better way to do this, but for now this will work. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 06:37:32 +0000