aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-19hwmon/w83627ehf: Be quiet when no chip is foundJean Delvare
This fixes bug #8593: http://bugzilla.kernel.org/show_bug.cgi?id=8593 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: No need to initialize fan_minJean Delvare
We don't need to initialize fan_min in this driver, as the fan_div attributes are read-only. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Export the thermal sensor typesJean Delvare
Add support for the w83627ehf thermal sensor types. I made them read-only, as the BIOS is supposed to set them up properly. This information makes it easier to find out which temperature channel corresponds to the CPU. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Enable VBAT monitoringJean Delvare
If VBAT monitoring is disabled, enable it. Original patch from an anonymous contributor on the lm-sensors trac system: http://lm-sensors.org/ticket/2218 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Add support for the VID inputsJean Delvare
The W83627EHF and similar chips have 6 VID input pins, add support for them. The driver changes the input voltage level automatically if the current setting is not correct for the detected CPU model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Fix timing issuesJean Delvare
* I have experimental evidence that the W83627EHG needs more than 1 second to refresh all the measured values. Increase the caching time to 1.5 second. * When changing a fan clock divider, the corresponding fan speed measurement register is no longer valid, until the next time the chip will refresh it. One way to fix this is to pretend that the cache is still valid for one more period (1.5 second.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Add error messages for two error casesDavid Hubbard
If the Super-I/O device is disabled, it is likely the BIOS has a good reason for leaving it disabled, so give a warning when enabling it -- it's not likely to be wired correctly or be able to give good data. Also, if the Super-I/O device is configured with an address of 0, the driver refuses to initialize it. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Convert to a platform driverDavid Hubbard
Remove i2c-isa from the w83627ehf driver, and use a platform driver instead. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Update the Kconfig entryDavid Hubbard
Add description for the W83627DHG chip to Kconfig. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19make coretemp_device_remove() staticAdrian Bunk
coretemp_device_remove() can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Add LM93 supportHans-Jürgen Koch
This patch adds support for the LM93 hardware monitoring chip. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Improve the pwmN_enable documentationJean Delvare
The documentation of the pwmN_enable interface file is not very clear, and has been confusing several driver authors already. Make it clearer. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPMJean Delvare
Also protects ourselves against a possible division by zero. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Add support for newer uGuru'sHans de Goede
This patch adds a new driver for the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit motherboards. This is an entirely different beast then the first and second revision (its again a winbond microcontroller, but the "protocol" to talk to it and the bank addresses are very different. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/f71805f: Add temperature-tracking fan control modePhil Endecott
Add support for the "temperature mode" fan speed control. In this mode, the user can define 3 temperature/speed trip points, and the chip will set the speed automatically according to the temperature changes. Signed-off-by: Phil Endecott <kernel@chezphil.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Preserve speed reading when changing fan minJean Delvare
The w83627ehf driver changes the fan clock divider automatically when a new min fan speed is set. It is supposed to preserve the fan speed reading while doing so, bug doesn't really. Fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: fix detection of abituguru volt inputsHans de Goede
This patch fixes the detection of volt inputs with a reading of more then 240 units. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: add SCH5317 to smsc47b397 driverJuerg Haefliger
This patch adds the SMSC SCH5317 chip (device ID 0x85) as a supported device to the smsc47b397 driver. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: convert it87 to platform drivercorentin.labbe
This is the patch for converting it87 to a platform driver (and remove i2c-isa). Signed-off-by: Corentin LABBE <corentin.labbe@geomatys.fr> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Fix a potential race condition on unloadJean Delvare
Fix a potential race condition when some hardware monitoring platform drivers are being unloaded. I believe that the driver data pointer shouldn't be cleared before all the sysfs files are removed, otherwise a sysfs callback might attempt to dereference a NULL pointer. I'm not sure exactly what the driver core protects drivers against, so let's play it safe. While we're here, clear the driver data pointer when probe fails, so as to not leave an invalid pointer behind us. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Convert vt8231 to a platform driverRoger Lucas
Convert the vt8231 driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Roger Lucas <roger@planbit.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/sis5595: Use PCI_REVISION_IDJean Delvare
Use PCI_REVISION_ID instead of our own define. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/sis5595: Use dynamic sysfs callbacksJean Delvare
This lets us get rid of macro-generated functions and shrinks the driver size by about 7%. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/sis5595: Convert to a platform driverJean Delvare
Convert the sis5595 driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/via686a: Use dynamic sysfs callbacksJean Delvare
This lets us get rid of macro-generated functions and shrinks the driver size by about 9%. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/via686a: Convert to a platform driverJean Delvare
Convert the via686a driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/via686a: Temperature interrupt configuration fixJean Delvare
Fix the writing of the temperature interrupt configuration. The old code was working only by accident. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/w83627hf: Add PWM frequency selection supportCarlos Olalla Martinez
Signed-off-by: Carlos Olalla <com.ea@tinet.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/it87: Add IT8726F supportRudolf Marek
Add support for IT8726F chip driver, which is just same as IT8716F with additional glue logic for AMD power sequencing. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon: Fault files naming conventionJean Delvare
We have the following naming convention documented in Documentation/hwmon/sysfs-interface for fault files: in[0-*]_input_fault fan[1-*]_input_fault temp[1-*]_input_fault Some drivers follow this convention (lm63, lm83, lm90, smsc47m192). However some drivers omit the "input" part and create files named fan1_fault (pc87427) or temp1_fault (dme1737). And the new "generic" libsensors follows this second (non-standard) convention, so it fails to report fault conditions for drivers which follow the standard. We want a single naming scheme, and everyone seems to prefer the shorter variant, so let's go for it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/lm90: Add support for the Maxim MAX6680/MAX6681Rainer Birkenmaier
Signed-off-by: Rainer Birkenmaier <rainer.birkenmaier@siemens.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon: Use platform_device_add_data()Jean Delvare
Use platform_device_add_data() in hardware monitoring drivers. This makes the code nicer and smaller too. Reported by David Hubbard. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com>
2007-07-19hwmon/pc87360: Convert to a platform driverJean Delvare
Convert the pc87360 driver from the nonsensical i2c-isa hack to a regular platform driver. This is a direct conversion, other cleanups could happen on top of that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jim Cromie <jim.cromie@gmail.com>
2007-07-19hwmon/dme1737: Add documentationJuerg Haefliger
Add documentation for the new SMSC DME1737 driver. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon: New SMSC DME1737 driverJuerg Haefliger
Add support for the hardware monitoring and fan control capabilities of the SMSC DME1737 and Asus A8000 Super-I/O chips. The hardware monitoring logic of this chip is similar to the LM85 but has some additional features that this driver supports. Even though it's a Super-I/O chip, the hardware monitoring logic can only be accessed via SMBus. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/ds1621: Create individual alarm filesJean Delvare
Future versions of libsensors will need this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
2007-07-19hwmon/ds1621: Use dynamic sysfs callbacksJean Delvare
This lets us get rid of macro-generated functions and shrinks the driver size by about 8%. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
2007-07-19hwmon/ds1621: Minor cleanupsJean Delvare
* Discard comments which do not apply or are redundant. * Remove a few useless instructions. * Rename new_client to just client. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
2007-07-19hwmon/smsc47m192: Semaphore to mutex conversionJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/lm90: Spelling fix: explicitlyJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon: New maintainerMark M. Hoffman
Mark M. Hoffman is taking over for Jean Delvare as maintainer of the hwmon subsystem. He is also the author/maintainer for several existing drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) [TG3]: Fix msi issue with kexec/kdump. [NET] XFRM: Fix whitespace errors. [NET] TIPC: Fix whitespace errors. [NET] SUNRPC: Fix whitespace errors. [NET] SCTP: Fix whitespace errors. [NET] RXRPC: Fix whitespace errors. [NET] ROSE: Fix whitespace errors. [NET] RFKILL: Fix whitespace errors. [NET] PACKET: Fix whitespace errors. [NET] NETROM: Fix whitespace errors. [NET] NETFILTER: Fix whitespace errors. [NET] IPV4: Fix whitespace errors. [NET] DCCP: Fix whitespace errors. [NET] CORE: Fix whitespace errors. [NET] BLUETOOTH: Fix whitespace errors. [NET] AX25: Fix whitespace errors. [PATCH] mac80211: remove rtnl locking in ieee80211_sta.c [PATCH] mac80211: fix GCC warning on 64bit platforms [GENETLINK]: Dynamic multicast groups. [NETLIKN]: Allow removing multicast groups. ...
2007-07-19IDE: fix termination of non-fs requestsJens Axboe
ide-disk calls ide_end_request(drive, 0, 0); to finish an unknown request, but this doesn't work so well for non-fs requests, since ide_end_request() internally looks at ->hard_cur_sectors to see how much data to end. Only file system requests store a transfer value in there, pc requests fill out ->data_len as a byte based transfer value instead. Since we ask to end 0 bytes of that request, it will never be terminated and ide-disk gets stuck in a loop "handling" that same request over and over. Switch __ide_end_request() to take a byte based transfer count, and adjust ide_end_request() to look at the right field to determine how much IO to end when it's being passed in 0. Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Tested-By: Giacomo Catenazzi <cate@debian.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19afs build fixAndrew Morton
Bruce and David's patches clashed. fs/afs/flock.c: In function 'afs_do_getlk': fs/afs/flock.c:459: error: void value not ignored as it ought to be Cc: "J. Bruce Fields" <bfields@fieldses.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19kernel/sysctl.c: finish off the warning commentsAndrew Morton
I've been chasing these comments around this file all week. Hopefully we're straight now. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: add to edac docsDoug Thompson
Updated the EDAC kernel documentation Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: fix edac_device sysfs corner case bugDoug Thompson
Some simple fixes to properly reference counter values from the block attribute level of edac_device objects. Properly sequencing the array pointer was added, resulting in correct identification of block level attributes from their base class functions. Added more verbose debug statement for event tracking. Also during some corner testing, found a bug in the store/show sequence of operations for the block attribute/controls management. An old intermediate structure for 'blocks' was still in the processing pipeline. This patch removes that old structure and correctly utilizes the new struct edac_dev_sysfs_block_attribute for passing control from the sysfs to the low level store/show function of the edac driver. Now the proper kobj pointer to passed downward to the store/show functions. Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: add to maintainers new infoDouglas Thompson
Update maintainer information on edac components Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: new i82975x driverRanganathan Desikan
New EDAC driver for the i82975x memory controller chipset Used on ASUS motherboards [akpm@linux-foundation.org: fix multiple coding-style bloopers] Signed-off-by: <arvind@acarlab.com> Signed-off-by: Ranganathan Desikan <rdesikan@jetzbroadband.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: fix workq reset deadlockDoug Thompson
Fix mutex locking deadlock on the device controller linked list. Was calling a lock then a function that could call the same lock. Moved the cancel workq function to outside the lock Added some short circuit logic in the workq code Added comments of description Code tidying Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>