aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-08-24Clean up drivers/ata/Kconfig a bit.Jeff Garzik
2006-08-24[PATCH] CONFIG_PM=n slim: drivers/scsi/sata_sil*Alexey Dobriyan
Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24[PATCH] sata_via: Add SATA support for vt8237aJay Cliburn
This patch adds support for the VIA Technologies VT8237A SATA controller, used, for example, on the ASUS M2V socket AM2 motherboard. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-22[PATCH] libata: change path to libata in libata.tmplHenrik Kretzschmar
Since libata moved from /drivers/scsi to /drivers/ata this template is broken. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-22Merge branch 'upstream-fixes' into upstreamJeff Garzik
Conflicts: drivers/ata/ata_piix.c
2006-08-22[PATCH] ata_piix: fix ghost device probing by honoring PCS present bitsTejun Heo
Move out PCS handling from piix_sata_prereset() into piix_sata_present_mask() and use it from newly implemented piix_sata_softreset(). Class codes for devices which are indicated to be absent by PCS are cleared to ATA_DEV_NONE. This fixes ghost device problem reported on ICH6 and 7. This patch moves PCS handling from prereset to softreset, which makes two behavior changes. * perform softreset even when PCS indicates no device * PCS handling is repeated before retrying softresets due to reset failures. Both behavior changes are intended and more consistent with how other drivers behave. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] libata: s/CONFIG_SCSI_SATA/CONFIG_[S]ATA/g in pci/quirks.cTejun Heo
drivers/pci/quirks.c was not updated when libata config constants were renamed braking several libata quirks. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-19Merge branch 'master' into upstream-fixesJeff Garzik
2006-08-18Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Greg Kroah-Hartman
2006-08-18Merge branch 'merge' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
2006-08-17[BRIDGE]: Disable SG/GSO if TX checksum is offHerbert Xu
When the bridge recomputes features, it does not maintain the constraint that SG/GSO must be off if TX checksum is off. This patch adds that constraint. On a completely unrelated note, I've also added TSO6 and TSO_ECN feature bits if GSO is enabled on the underlying device through the new NETIF_F_GSO_SOFTWARE macro. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[NETFILTER]: ip_tables: fix table locking in ipt_do_tablePatrick McHardy
table->private might change because of ruleset changes, don't use it without holding the lock. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[NETFILTER]: ctnetlink: fix deadlock in table dumpingPatrick McHardy
ip_conntrack_put must not be called while holding ip_conntrack_lock since destroy_conntrack takes it again. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-18[POWERPC] Fix the mpc8641_hpcn.dts file.Jon Loeliger
Add 'linux,phandle' entry to i8259@4d0 node. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] Offer PCI as a CONFIG choice for PPC_86xx.Jon Loeliger
Also fix 80-column run-over. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] Add MPC8641 HPCN Device Tree Source file.Jon Loeliger
As per list discussion, let's add device tree source files under powerpc/boot/dts. If nothing else, it is a starting point. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-18[POWERPC] Convert to mac-address for ethernet MAC address data.Jon Loeliger
Also accept "local-mac-address". However the old "address" is now obsolete, but accepted for backwards compatibility. It should be removed after all device trees have been converted to use "mac-address". Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17[IPV4]: severe locking bug in fib_semantics.cAlexey Kuznetsov
Found in 2.4 by Yixin Pan <yxpan@hotmail.com>. > When I read fib_semantics.c of Linux-2.4.32, write_lock(&fib_info_lock) = > is used in fib_release_info() instead of write_lock_bh(&fib_info_lock). = > Is the following case possible: a BH interrupts fib_release_info() while = > holding the write lock, and calls ip_check_fib_default() which calls = > read_lock(&fib_info_lock), and spin forever. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[MCAST]: Fix filter leak on device removal.David L Stevens
This fixes source filter leakage when a device is removed and a process leaves the group thereafter. This also includes corresponding fixes for IPv6 multicast source filters on device removal. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[NET]: Disallow whitespace in network device names.David S. Miller
It causes way too much trouble and confusion in userspace. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[PPP]: handle kmalloc failures and convert to using kzallocPanagiotis Issaris
The PPP code contains two kmalloc()s followed by memset()s without handling a possible memory allocation failure. (Suggested by Joe Perches). And furthermore, conversions from kmalloc+memset to kzalloc. [akpm@osdl.org: fix error-path leak] [akpm@osdl.org: cleanups] [paulus@samba.org: don't add useless printk and cardmap_destroy calls] Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[PKT_SCHED] cls_u32: Fix typo.Ralf Hildebrandt
Signed-off-by: Ralf Hildebrandt <Ralf.Hildebrandt@charite.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[ATM]: Compile error on ARMKevin Hilman
atm_proc_exit() is declared as __exit, and thus in .exit.text. On some architectures (ARM) .exit.text is discarded at compile time, and since atm_proc_exit() is called by some other __init functions, it results in a link error. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[BNX2]: Convert to netdev_alloc_skb()Michael Chan
Convert dev_alloc_skb() to netdev_alloc_skb() and increase default rx ring size to 255. The old ring size of 100 was too small. Update version to 1.4.44. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[BNX2]: Fix tx race condition.Michael Chan
Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int() similar to the one in tg3 discovered by Herbert Xu: CPU0 CPU1 bnx2_start_xmit() if (tx_ring_full) { tx_lock bnx2_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in bnx2_tx_int() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made, very much identical to the tg3 fix: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in bnx2_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling netif_wake_queue(). 4. Add memory barrier to bnx2_tx_avail(). 5. Add bp->tx_wake_thresh which is set to half the tx ring size. 6. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[NET]: Terminology in ip-sysctl.txtJan "Yenya" Kasprzak
this minor patch fixes the description of net.ipv4.tcp_mem sysctl in ip-sysctl.txt - the headline names the values "min, pressure, max", while the description uses the "low, pressure, high" values. Both tcp_rmem and tcp_wmem descriptions use the "min, pressure, max" values, so I have changed the tcp_mem to match this and not vice versa. Signed-off-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[IPV4]: Possible leak of multicast source filter sctructureMichal Ruzicka
There is a leak of a socket's multicast source filter list structure on closing a socket with a multicast source filter set on an interface that does not exist any more. Signed-off-by: Michal Ruzicka <michal.ruzicka@comstar.cz> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[IPV6] lockdep: annotate __icmpv6_socketIngo Molnar
Split off __icmpv6_socket's sk->sk_dst_lock class, because it gets used from softirqs, which is safe for __icmpv6_sockets (because they never get directly used via userspace syscalls), but unsafe for normal sockets. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[NETFILTER]: xt_physdev build fixAndrew Morton
It needs netfilter_bridge.h for brnf_deferred_hooks Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[NET]: Fix potential stack overflow in net/core/utils.cSuresh Siddha
On High end systems (1024 or so cpus) this can potentially cause stack overflow. Fix the stack usage. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[VLAN]: Make sure bonding packet drop checks get done in hwaccel RX path.David S. Miller
Since __vlan_hwaccel_rx() is essentially bypassing the netif_receive_skb() call that would have occurred if we did the VLAN decapsulation in software, we are missing the skb_bond() call and the assosciated checks it does. Export those checks via an inline function, skb_bond_should_drop(), and use this in __vlan_hwaccel_rx(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-18[POWERPC] powerpc: Clear HID0 attention enable on PPC970 at boot timeOlof Johansson
Clear HID0[en_attn] at CPU init time on PPC970. Closes CVE-2006-4093. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17[POWERPC] Fix irq radix tree remapping typoBenjamin Herrenschmidt
The code for using the radix tree for reverse mapping of interrupts has a typo that causes it to create incorrect mappings if the software and hardware numbers happen to be different. This would, among others, cause the IDE interrupt to fail on js20's. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17[POWERPC] kprobes: Fix possible system crash during out-of-line single-steppingAnanth N Mavinakayanahalli
- On archs that have no-exec support, we vmalloc() a executable scratch area of PAGE_SIZE and divide it up into an array of slots of maximum instruction size for that arch - On a kprobe registration, the original instruction is copied to the first available free slot, so if multiple kprobes are registered, chances are, they get contiguous slots - On POWER4, due to not having coherent icaches, we could hit a situation where a probe that is registered on one processor, is hit immediately on another. This second processor could have fetched the stream of text from the out-of-line single-stepping area *before* the probe registration completed, possibly due to an earlier (and a different) kprobe hit and hence would see stale data at the slot. Executing such an arbitrary instruction lead to a problem as reported in LTC bugzilla 23555. The correct solution is to call flush_icache_range() as soon as the instruction is copied for out-of-line single-stepping, so the correct instruction is seen on all processors. Thanks to Will Schmidt who tracked this down. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17[POWERPC] Make crash.c work on 32-bit and 64-bitMichael Ellerman
To compile kexec on 32-bit we need a few more bits and pieces. Rather than add empty definitions, we can make crash.c work on 32-bit, with only a couple of kludges. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17[POWERPC] Move some kexec logic into machine_kexec.cMichael Ellerman
We're missing a few functions for kexec to compile on 32-bit. There's nothing really 64-bit specific about the 64-bit versions, so make them generic rather than adding empty definitions for 32-bit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17[POWERPC] update {g5,iseries,pseries}_defconfigsWill Schmidt
Updating the defconfigs for iseries, pseries, and G5. Sticking with the defaults, with the following exceptions: I've turned off HW_RANDOM for all three configs. For G5, I've enabled SND_AOA and friends as modules; this includes the FABRIC_LAYOUT, ONYX, TAS, TOONIE and SOUNDBUS* config options. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17[POWERPC] Make secondary CPUs call into kdump on reset exceptionDavid Wilder
In the case of a system hang, the user will invoke soft-reset to initiate the kdump boot. If xmon is enabled, the CPU(s) enter into the xmon debugger. Unfortunately, the secondary CPU(s) will return to the hung state when they exit from the debugger (returned from die() -> system_reset_exception()). This causes a problem in kdump since the hung CPU(s) will not respond to the IPI sent from kdump. This patch fixes the issue by calling crash_kexec_secondary() directly from system_reset_exception() without returning to the previous state. These secondary CPUs wait 5ms until the kdump boot is started by the primary CPU. In the case we exited from the debugger to "recover" (command 'x' in xmon) the primary and the secondary CPUs will all return from die() -> system_reset_exception() ->crash_kexec_secondary() wait 5ms, then return to the previous state. A kdump boot is not started in this case. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-2.6.18Greg Kroah-Hartman
2006-08-16kbuild: correct assingment to CFLAGS with CROSS_COMPILESam Ravnborg
Some architectures change $CC in arch/$(ARCH)/Makefile mips is one example. That have impact on what options are supported by gcc so move all $(call cc-option, ...) after include of arch specific Makefile. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-08-16Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Greg Kroah-Hartman
2006-08-16[S390] kernel page table allocation.Heiko Carstens
Don't waste DMA capable pages for identity mapping page tables. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-16[S390] inaccessible PAV alias devices on LPAR.Peter Oberparleiter
In some situations PAV alias devices on LPAR are not accessible. The initialization procedure required to enable access to PAV alias devices has to be performed per storage server subsystem and not only once per storage server. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-16[S390] dasd slab cache alignment.Heiko Carstens
The dasd_page_cache should return page addresses and therefore the cache must be created with an alignment of PAGE_SIZE. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-16Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogGreg Kroah-Hartman
2006-08-15[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patchHans de Goede
There is a small but annoying bug in scripts/mod/file2alias.c which causes it to generate invalid aliases for input devices on 64 bit archs. This causes joydev.ko to not be automaticly loaded when inserting a joystick, resulting in a non working joystick (for the average user). In scripts/mod/file2alias.c is the following code for generating the input aliases: static void do_input(char *alias, kernel_ulong_t *arr, unsigned int min, unsigned int max) { unsigned int i; for (i = min; i < max; i++) if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) sprintf(alias + strlen(alias), "%X,*", i); } On 32 bits systems, this correctly generates "0,*" for the first alias, "8,*" for the second etc. However on 64 bits it generates: "0,*20,*" resp "8,*28,*" Notice how it adds 20 + first entry (hex) ! to the list of hex codes, which is 32 more then the first entry, thus is because the bit test above wraps at 32 bits instead of 64. scripts/mod/file2alias.c, line 379 reads: if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) That should be: if (arr[i / BITS_PER_LONG] & (1L << (i%BITS_PER_LONG))) Notice the added 'L' after the 1, otherwise that is an 32 bit int instead of a 64 bit long, and when that int gets shifted >= 32 times, appearantly the number by which to shift is wrapped at 5 bits ( % 32) causing it to test a bit 32 bits too low. The patch below makes the nescesarry 1 char change :) Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-15Merge branch 'upstream-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
2006-08-15[WATCHDOG] Kconfig typos fix.Matt LaPlante
Three typos in drivers/char/watchdog/Kconfig... Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-08-14[PATCH] fcntl(F_SETSIG) fixTrond Myklebust
fcntl(F_SETSIG) no longer works on leases because lease_release_private_callback() gets called as the lease is copied in order to initialise it. The problem is that lease_alloc() performs an unnecessary initialisation, which sets the lease_manager_ops. Avoid the problem by allocating the target lease structure using locks_alloc_lock(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>