aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-19Input: i8042 - add Arima-Rioworks HDAMB board to noloop listDmitry Torokhov
The board does not raise AUX IRQ in response to AUX LOOP command. Reported-by: Guillaume Morin <guillaume@morinfr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-19Input: sgi_btns - add support for SGI Indy volume buttonsThomas Bogendoerfer
Also rename sgio2_btns to sgi_btns since the driver is not only for SGI O2 anymore. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-19Input: add option to disable HP SDC driverHelge Deller
Add "no_hpsdc" kernel module option to the hp_sdc driver, so that the driver can be instructed to not enable the HP SDC port. This is useful on some older HPPA boxes with HIL keyboard and HIL mouse where the new HP SDC HIL drivers don't work yet. By disabling the new hp_sdc driver users are able to use the older hilkbd driver instead. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-08Input: serio - trivial documentation fixNiels de Vos
In include/linux/serio.h two different define-series are documented as "Serio types". However the second series contains defines for the different protocols. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: add new serio driver for Xilinx XPS PS2 IPJohn Linn
Added a new driver for Xilinx XPS PS2 IP. This driver is a flat driver to better match the Linux driver pattern. Signed-off-by: Sadanand <sadanan@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: add driver for Tabletkiosk Sahara TouchIT-213 touchscreenClaudio Nieder
Signed-off-by: Claudio Nieder <private@claudio.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: new driver for SGI O2 volume buttonsThomas Bogendoerfer
This driver adds support for the volume buttons on the front of every SGI O2 workstation. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: yealink - reliably kill urbsOliver Neukum
Yealink uses two URBs that submit each other. This arrangement cannot be reliably killed with usb_kill_urb() alone, as there's a window during which the wrong URB may be killed. The fix is to introduce a flag. [dtor@mail.ru: remove spinlock, flag alone should be enough] Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: q40kbd - make q40kbd_lock staticAdrian Bunk
This patch makes the needlessly global q40kbd_lock static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: gtco - eliminate early returnJulia Lawall
There seems to be no reason why this error case should do less cleaning up than the other adjacent ones, so the goto, which is currently dead code, seems to be what is intended. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: i8042 - add Dritek quirk for Acer Aspire 5720Carlos Corbacho
The Acer Aspire 5720 series also requires the Dritek quirk to enable the extra scancodes. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-03Input: usbtouchscreen - ignore eGalax screens supporting HID protocolDaniel Ritz
The newer versions of the eGalax/EETI screen implement the HID protocol. The device IDs are still the same, but the USB interface descriptor shows the device being of HID class. Change usbtouchscreen to ignore the HID models as they are handled properly by usbhid. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-03Input: i8042 - add Medion NAM 2070 to noloop blacklistDmitry Torokhov
AUX LOOP command fails with a timeout although this laptop has a touchpad. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-03Input: i8042 - add Gericom Bellagio to nomux blacklistJiri Kosina
Gericom Bellagio needs to be added to nomux blacklist, otherwise its touchpad misbehaves. Reported-by: Roland Kletzing <roland.kletzing@materna.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-03Input: i8042 - add Acer Aspire 1360 to nomux blacklistJiri Kosina
Acer Aspire 1360 needs to be added to nomux blacklist, otherwise its touchpad misbehaves. Reported-by: Clark Tompsett <clarkt@cnsp.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: hp_sdc_mlc.c - make a struct staticAdrian Bunk
This patch makes the needlessly global struct hp_sdc_mlc_priv_s static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: hil_mlc.c - make code staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: wistron - generate normal key event if bluetooth or wifi not presentÉric Piel
If the subsystem is not present, instead of not doing anything, report the key press as a normal key. This is done by modifying at initialization the copied key entry table. Signed-off-by: Eric Piel <Eric.Piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: atkbd - fix HP 2133 not sending release event for video switchJiri Kosina
Video switch key on HP 2133 doesn't send release event, so we have to create workaround similar to what we do for Dell Latitude, i.e. perform DMI match for the system and generate 'false' release event ourselves, so that userspace doesn't think that the key is stuck forever. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: Add driver for iNexio serial touchscreen.Richard Lemon
Signed-off-by: Richard Lemon <richard@codelemon.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: wm9712 - no pressure measurement with 5-wire modeMark Brown
The hardware does not support pressure measurement is 5-wire mode so warn the user if he tries to request it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: fix force feedback upload issue in compat modeAdam Dawidowski
Force feedback upload of effects through the event device (ioctl EVIOCSFF) is not working in 32 bit applications running on 64-bit kernel due to the fact that struct ff_effect contains a pointer, resulting in the structure having different sizes in 64 and 32 bit programs and causing difference in ioctl numbers. [dtor@mail.ru: refactor to keep all ugliness in evdev] Signed-off-by: Adam Dawidowski <drake_ster@wp.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: atamouse - various cleanupsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: evbug - identify device by its sysfs IDDmitry Torokhov
This should help with devices that don't set up their phys or name since sysfs ID is always present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: don't reset sync flag when ignoring eventDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-17Merge branch 'for-linus' into nextDmitry Torokhov
Conflicts: drivers/input/mouse/appletouch.c
2008-06-17Input: appletouch - implement reset-resume logicOliver Neukum
On some boxes the touchpad needs to be reinitialized after resume to make it function again. This fixes bugzilla #10825. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-17Input: i8042 - retry failed CTR writes when resumingJiri Kosina
There are systems that fail in i8042_resume() with i8042: Can't write CTR to resume as i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR) fails even though the controller claimed itself to be ready before. One retry after failing write fixes the problems on the failing systems. Reported-by: Helmut Schaa <hschaa@novell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-06Input: i8042 - add Fujitsu-Siemens Amilo Pro V2030 to nomux tableJiri Kosina
Fujitsu Siemens Amilo Pro V2030 needs nomux table entry, in addition to already existing entry for V2010 model (note that Fujitsu-Siemens changed the capitalization in the DMI data for product). Tested-by: Jiri Mleziva <jmleziva@tiscali.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-06Input: pcspkr - remove negative dependency on snd-pcspStas Sergeev
It should be possible to build pcspkr driver together with snd-pcsp, even though tehy can not be used together. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-02Input: pxa27x_keypad - add wakeup supportEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-02Input: serio - remove pending events when unregistering driverDmitry Torokhov
That fixes an opps when driver is repeatedly loaded and unloaded in a tight loop. Tested-by: Roland Kletzing <devzero@web.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-02Input: atkbd - use ushort instead of uchar keymapDmitry Torokhov
Since some of the keycodes defined in input.h have values greater than 255 we should use unsigned shorts in keymaps. Tested-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-02Input: add HTC Shift Touchscreen DriverPau Oliva Fora
Signed-off-by: Pau Oliva Fora <pau@eslack.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-30Input: rename SW_RADIO to SW_RFKILL_ALLHenrique de Moraes Holschuh
The SW_RADIO code for EV_SW events has a name that is not descriptive enough of its intended function, and could induce someone to think KEY_RADIO is its EV_KEY counterpart, which is false. Rename it to SW_RFKILL_ALL, and document what this event is for. Keep the old name around, to avoid userspace ABI breaks. The SW_RFKILL_ALL event is meant to be used by rfkill master switches. It is not bound to a particular radio switch type, and usually applies to all types. It is semantically tied to master rfkill switches that enable or disable every radio in a system. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-30Input: gtco - fix double kfree in error handling pathDmitry Torokhov
The code would try to free 'report' twice upon input_register_device() failure. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-29Input: i8042 - add Intel D845PESV to nopnp listJiri Kosina
This patch introduces i8042_dmi_nopnp_table to make it possible to perform DMI matches for systems that need 'i8042.nopnp' to work correctly, and introduces such an entry for Intel D845PESV -- this system doesn't detect PS2 mouse reliably without this option, as reported by Robert Lewis. [dtor@mail.ru - make it compile if CONFIG_PNP is off - reported by Randy Dunlap] Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-28Input: pxa27x_keypad - miscellaneous fixesAntonio Ospite
1. Set input bits for direct keys codes 2. Set input bits for rotary encoder codes only if rotary encoder is enabled 3. Enable EV_REL only if rotary encoder is enabled and rel_codes are set up Signed-off-by: Antonio Ospite <ao2@openezx.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-28Input: atkbd - mark keyboard as disabled when suspending/unloadingDmitry Torokhov
This will shut off garbage that may come from KBD port during resume. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27Input: apanel - remove duplicate includeHuang Weiyi
Remove duplicate include file <linux/module.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27Input: wm9713 - support five wire panelsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27Input: wm97xx-core - fix race on PHY initMark Brown
The chip phy_init() function must be called before the dig_enable() function but dig_enable() is called when the device is opened and we only call phy_init() after having reigstered the device, meaning the two can race. Fix this by doing the phy_init() before we register the input device. Thanks to Rodolfo Giometti <giometti@enneenne.com> for the report. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27Input: wm97xx-core - fix driver nameMark Brown
Fix driver name - thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for reporting this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27Input: wm97xx-core - report a phys for WM97xx touchscreensMark Brown
phys is displayed in diagnostic output like that from evbug so ensure that it is set to something. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-27Input: i8042 - make sure Dritek quirk is invoked at resumeBruno Prémont
Also do not fail i8042 entire initialization if enabling dritek extension fails. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-20Input: i8042 - add Dritek quirk for Acer TravelMate 660Bruno Prémont
The Acer TravelMate 660 series also requires the Dritek quirk to enable the extra scancodes. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-20Input: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: gpio-keys debouncing supportDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: add support for SuperH MigoR touchscreenMagnus Damm
This is V2 of the MigoR touch screen driver. The chip we interface to is unfortunately a custom designed microcontroller speaking some undocumented protocol over i2c. The board specific code is expected to register this device as an i2c chip using struct i2c_board_info [] and i2c_register_board_info(). [dtor@mail.ru: don't enable touchscreen if there are no users] Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: remove unused definesJoe Perches
Remove unused to_dev, to_handler, to_handle from include/linux/input.h Move to_handle_h from include/linux/input.h to drivers/char/keyboard.c Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:06:34 +0000