aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-23m68knommu: remove last use of CONFIG_FADS and CONFIG_RPXCLASSICGreg Ungerer
They have never been used in this port of the driver. It is has only ever been used on the ColdFire SoC ethernet core. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: remove RPXCLASSIC from the m68k treeSebastian Siewior
This ifdefs are leftovers from the time as the driver was running on a ppc. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: fec: remove FADSSebastian Siewior
I found config FADS only in ppc/Kconfig. Bye bye relic. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: MCF5307 PIT GENERIC_CLOCKEVENTS supportSebastian Siewior
The PIT code has been changed in order to suppport GENERIC_CLOCKEVENTS. The priority of the PIT clocksource has been decreased in favor of the DMA timer. pit_cycles_per_jiffy become a constant (PIT_CYCLES_PER_JIFFY) because it is known at compile time and does not change afterwards. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: add read_barrier_depends() and irqs_disabled_flags()Sebastian Siewior
/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/trace.c: In function 'tracing_generic_entry_update': /home/bigeasy/git/linux-2.6-ftrace/kernel/trace/trace.c:802: error: implicit declaration of function 'irqs_disabled_flags' make[3]: *** [kernel/trace/trace.o] Error 1 /home/bigeasy/git/linux-2.6-ftrace/kernel/trace/ftrace.c: In function 'ftrace_list_func': /home/bigeasy/git/linux-2.6-ftrace/kernel/trace/ftrace.c:61: error: implicit declaration of function 'read_barrier_depends' Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: add byteswap assembly opcode for ISA A+Sebastian Siewior
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: add ffs and __ffs plattform which support ISA A+ or ISA CSebastian Siewior
the ff1 and bitrev opcode appears in ISA C and ISA A+ what isn't supported by all plattforms. The assembly optimization is automaticly enabled if the compiler understand the required cpu keyword. My m5235 seems to boot and run fine so far. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: add sched_clock() for the DMA timerSebastian Siewior
with this printk() and other sched_clock() user use the more precise timestamps. The highly optimized math is from arch/x86/kernel/tsc_32.c. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: complete generic timeSebastian Siewior
do_set_rtc() isn't required because the work that is handled is allready served if read_persistent_clock() & update_persistent_clock() are implemented and CONFIG_GENERIC_CMOS_UPDATE is. sync_cmos_clock() looks very familiar :) Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: move code within time.cSebastian Siewior
This patch creates two functions do_set_rtc() and read_rtc_mmss() based on allready available code. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: m68knommu: add old stack trace methodSebastian Siewior
The old method is used when frame pointers are not available. Also fix formating with CONFIG_KALLSYMS=n which eliminates \n. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: Add Coldfire DMA Timer supportSebastian Siewior
This one could be used as a hrtimer. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: defconfig for M5407C3 boardGreg Ungerer
Add a defconfig for the Freescale M5407C3 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: defconfig for M5307C3 boardGreg Ungerer
Add a defconfig for the Freescale M5307C3 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: defconfig for M5275EVB boardGreg Ungerer
Add a defconfig for the Freescale M5275EVB board. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: defconfig for M5249EVB boardGreg Ungerer
Add a defconfig for the Freescale M5249EVB board. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: change to a configs directory for board configurationsGreg Ungerer
Remove the old example m68knommu defconfig. Create a configs directory for specific board configurations. Make the m5208evb the default. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits) ipw2200: Call netif_*_queue() interfaces properly. netxen: Needs to include linux/vmalloc.h [netdrvr] atl1d: fix !CONFIG_PM build r6040: rework init_one error handling r6040: bump release number to 0.18 r6040: handle RX fifo full and no descriptor interrupts r6040: change the default waiting time r6040: use definitions for magic values in descriptor status r6040: completely rework the RX path r6040: call napi_disable when puting down the interface and set lp->dev accordingly. mv643xx_eth: fix NETPOLL build r6040: rework the RX buffers allocation routine r6040: fix scheduling while atomic in r6040_tx_timeout r6040: fix null pointer access and tx timeouts r6040: prefix all functions with r6040 rndis_host: support WM6 devices as modems at91_ether: use netstats in net_device structure sfc: Create one RX queue and interrupt per CPU package by default sfc: Use a separate workqueue for resets sfc: I2C adapter initialisation fixes ...
2008-07-22Re-delete zombie 'drivers/usb/serial/airprime.c' fileLinus Torvalds
Stephen Rothwell points out that this file got deleted (on purpose) by commit 640c1bce86d1e11ee6a1263fdf6170d3210b1684 ("USB: delete airprime driver"), but then almost immediately incorrectly resurrected by commit 95da310e66ee8090119596c70ca8432e57f9a97f ("usb_serial: API all change"). Delete it again. If it comes back, we'll need to drive a stake through its heart. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: pass -m32 when building vmlinux.lds sparc: Fixes the DRM layer build on sparc. ide: merge <asm-sparc/ide_64.h> with <asm-sparc/ide_32.h> ide: <asm-sparc/ide_64.h>: use __raw_{read,write}w() ide: <asm-sparc/ide_32.h>: use __raw_{read,write}w() ide: <asm-sparc/ide_64.h>: use %r0 for outw_be() sparc64: Do not define BIO_VMERGE_BOUNDARY.
2008-07-22ipw2200: Call netif_*_queue() interfaces properly.David S. Miller
netif_carrier_{on,off}() handles starting and stopping packet flow into the driver. So there is no reason to invoke netif_stop_queue() and netif_wake_queue() in response to link status events. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22netxen: Needs to include linux/vmalloc.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-22[netdrvr] atl1d: fix !CONFIG_PM buildJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-22r6040: rework init_one error handlingFlorian Fainelli
This patch reworks the error handling in r6040_init_one in order not to leak resources and correcly unmap and release PCI regions of the MAC. Also prefix printk's with the driver name for clarity. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: bump release number to 0.18Florian Fainelli
This patch bumps the release of the r6040 driver. There has been quite some versions of it out there, but this one is the one people should report bugs against. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: handle RX fifo full and no descriptor interruptsFlorian Fainelli
This patch allows the MAC to handle the RX FIFO full and no descriptor available interrupts. While we are at it replace the TX interrupt with its corresponding definition. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: change the default waiting timeFlorian Fainelli
This patch changes the default waiting time of a packet, which along with our previous r6040_rx path, was causing huge delays with another host (160 to 230 ms). Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: use definitions for magic values in descriptor statusFlorian Fainelli
Define all the descriptor status the MAC can set. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: completely rework the RX pathFlorian Fainelli
This patch completely reworks the RX path in order to be more accurate about what is going on with the MAC. We no longer read the error from the MLSR register instead read the descriptor status register which reflects, the error per descriptor. We now allocate skbs on the fly in r6040_rx, and we handle allocation failure instead of simply dropping the packet. Remove the rx_free_desc counter of r6040_private structure since we allocate skbs in the RX path. r6040_rx_buf_alloc is now removed and becomes unuseless. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: call napi_disable when puting down the interface and set lp->dev ↵Florian Fainelli
accordingly. We did not call napi_disabled when putting down the interface which should be done. Finally initialize lp->dev when everything is set. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22mv643xx_eth: fix NETPOLL buildLennert Buytenhek
Joseph Fannin <jfannin@gmail.com> and Takashi Iwai <tiwai@suse.de> noticed that commit 073a345c04b01da0cc5b79ac7be0c7c8b1691ef5 ("mv643xx_eth: clarify irq masking and unmasking") broke the mv643xx_eth build when NETPOLL is enabled, due to it not renaming one instance of INT_CAUSE_EXT in mv643xx_eth_netpoll(). This patch takes care of that instance as well. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Joseph Fannin <jfannin@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: rework the RX buffers allocation routineFlorian Fainelli
Rework the RX buffers allocation function so that we do not leak memory in the case we could not allocate skbs for the RX path. Propagate the errors to the r6040_up function where we call the RX buffers allocation function. Also rename the r6040_alloc_txbufs function to r6040_init_txbufs, to reflect what it really does. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: fix scheduling while atomic in r6040_tx_timeoutFlorian Fainelli
Add a helper function which only modifies R6040 MAC registers use it when we timeout, and on adapter initialization. Fix the scheduling while atomic but in the timeout routine due to the reallocation of rx/tx buffers. Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: fix null pointer access and tx timeoutsFlorian Fainelli
This patch fixes a null pointer access in r6040_rx due to lp->dev not being initialized. Fix the TX timeouts, TX irq was not re-enabled on RX irq Signed-Off-By: Joerg Albert <jal2@gmx.de> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22r6040: prefix all functions with r6040Florian Fainelli
Prefix all functions inside the r6040 driver with r6040 to avoid namespace clashing. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22rndis_host: support WM6 devices as modemsThomas Backlund
This patch allows Windows Mobile 6 devices to be used for tethering -- that is, used as modems. It was requested by AdamW in kernel bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=11119 and Mandriva kernel-discuss list. It is tested and confirmed to work by Peterl: http://forum.eeeuser.com/viewtopic.php?pid=323543#p323543 This patch is based on the patch in the above kernel bugzilla, which is from the usb-rndis-lite tree. [ dbrownell@users.sourceforge.net: misc fixes ] Signed-off-by: Thomas Backlund <tmb@mandriva.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22at91_ether: use netstats in net_device structurePaulius Zaleckas
Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: Create one RX queue and interrupt per CPU package by defaultBen Hutchings
Using multiple cores in the same package to handle received traffic does not appear to provide a performance benefit. Therefore use CPU topology information to count CPU packages and use that as the default number of RX queues and interrupts. We rely on interrupt balancing to spread the interrupts across packages. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: Use a separate workqueue for resetsBen Hutchings
This avoids deadlock in case a reset is triggered during self-test. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22sfc: I2C adapter initialisation fixesBen Hutchings
As recommended by Jean Delvare: - Increase timeout to 50 ms - Leave adapter class clear so that unwanted drivers do not probe our bus - Use strlcpy() for name initialisation Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: make ioport freeTaku Izumi
This patch makes e1000 driver ioport-free. This corrects behavior in probe function so as not to request ioport resources as long as they are not really needed. This is based on the ioport-free patch of e1000 driver from Auke Kok and Tomohiro Kusumi. Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jeff Kirsher<jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: delete non NAPI code from the driverFrancois Romieu
Compile-tested only. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: remove email referenceJeff Kirsher
The email linux-nics@intel.com is no longer available, remove all references. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Move assignments in tests before testJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: checkpatch cleanJoe Perches
Redefine DPRINTK macro using do while(0) __FUNCTION__ to __func__ structs {} on separate lines Surround negative constants with () Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Remove spaces after casts and function namesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Move extern function definitions to e1000.hJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22e1000: Use hw, er32, and ew32Joe Perches
Use struct e1000_hw *hw = adapter->hw; where necessary Change macros E1000_READ_REG and E1000_WRITE_REG to er32 and ew32 Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 14:07:07 +0000