aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-17[POWERPC] iSeries: eliminate pci_dn bussubnoStephen Rothwell
xlate_iomm_address() really wants the ds_addr to pass to the HV, so store that value (instead of the BAR number) when we allocate the device bars. This is not a fast path, so we can look up the device_node property there instead of using the bussubno field of the pci_dn. The other user of iseries_ds_addr() was already scanning the device tree, so looking up a property will not slow it down any more. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] The pci_dn pcidev is only used by EEHStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] The pci_dn class_code is only used by EEHStephen Rothwell
... so move it into the #ifdef CONFIG_EEH section. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] booting-without-of: localbus should not include board nameAnton Vorontsov
Fix documentation once and for ever, because I'm pretty tired of repeating that I am merely following it. ;-) http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048096.html http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046977.html http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046979.html http://ozlabs.org/pipermail/linuxppc-dev/2007-October/044411.html http://ozlabs.org/pipermail/linuxppc-dev/2007-October/044413.html Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/platforms/powermacCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/kernelCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/sysdevCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Add of_find_matching_node() helper functionGrant Likely
Similar to of_find_compatible_node(), of_find_matching_node() and for_each_matching_node() allow you to iterate over the device tree looking for specific nodes, except that they take of_device_id tables instead of strings. This also moves of_match_node() from driver/of/device.c to driver/of/base.c to colocate it with the of_find_matching_node which depends on it. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Kill sparse warning in HPTE_V_COMPARE()Geert Uytterhoeven
Fixes sparse warning: constant 0xffffffffffffff80 is so big it is unsigned long Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-11Merge branch 'virtex-for-2.6.25' of ↵Josh Boyer
git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.25
2008-01-09[POWERPC] Xilinx uartlite: Section type fixupsStephen Neuendorffer
All the __devexit functions are now appropriately tagged. This fixes some ppc link warnings. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-09[POWERPC] Xilinx: updated device tree compatibility to match uboot bsp ↵Stephen Neuendorffer
generator. Missed this one in the boot loader before. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-09[POWERPC] Xilinx: Update booting-without-of.Stephen Neuendorffer
This now better describes what the UBoot device tree generator actually does. In particular: 1) Nodes have a label derived from the device name, and a node name derived from a generic version of the device type, e.g. 'ethernet', 'serial', etc. 2) Usage of compound nodes (representing more than one device in the same IP) which actually works. This requires having a valid compatible node, and all the other things that a bus normally has. I've chosen 'xlnx,compound' as the bus name to describe these compound nodes. In addition, I've clarified some of the language relating to how mhs nodes should be represent in the device tree. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-09[POWERPC] Xilinx: Add correct compatible list for device tree bus bindings.Stephen Neuendorffer
Includes both flavors of plb, opb, dcr, and a pseudo 'compound' bus for representing compound peripherals containing more than one logical device. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-09[POWERPC] Xilinx: update compatible list for interrupt controllerStephen Neuendorffer
These values now match what is generated by the uboot BSP generator. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-08[POWERPC] 4xx: PCIe: Increase max busses per port to 64Stefan Roese
Because of how big mapping the config space is (1M per bus), we limit how many busses we support for now. In the long run, we could replace that with something akin to kmap_atomic instead. This patch changes the limit from currently 16 to 64. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-08[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapperMatthias Fuchs
This patch adds support for 405GPr processors with optional new mode strapping. ibm405gp_fixup_clocks() can now be used for 405GP and 405GPr CPUs. This is in preparation of porting the cpci405 platform support from arch/ppc to arch/powerpc. This patch also adds ibm405ep_fixup_clocks() to support 405EP CPUs from the boot wrapper. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-08[POWERPC] 4xx: enable built-in networking for Sequoia defconfigHollis Blanchard
Enable EMAC driver for Sequoia (and while we're in there, disable Macintosh drivers for Sequoia and Bamboo). Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-04[POWERPC] 4xx: Add EMAC support to Kilauea defconfigStefan Roese
Somehow the EMAC support was dropped (or never really added) to the Kilauea defconfig file. This patch finally adds EMAC support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-02[POWERPC] 4xx: typo in calling machine_device_initcall() for Sequoia boardGrant Likely
Fix an obvious typo. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-31Merge branch 'for-2.6.25' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/olof/pasemi
2007-12-31Revert "[POWERPC] Disable PCI IO/Mem on a device when resources can't be ↵Paul Mackerras
allocated" This reverts commit 553aa7659bc0e188348f64e978343ed984eb6e56 at Ben H's request, because it confused IORESOURCE_* flags with command register bits. Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-28[POWERPC] Enable CONFIG_PCI_MSI and CONFIG_MD in pasemi_defconfigOlof Johansson
Enable MSI now that we have an implementation, and enable CONFIG_MD and the raid options by default as well. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-12-28[POWERPC] pasemi: Distribute interrupts evenly across cpusOlof Johansson
By default the OpenPIC on PWRficient will bias to one core (since that will improve changes of the other core being able to stay idle/powered down). However, this conflicts with most irq load balancing schemes, since setting an interrupt to be delivered to either core doesn't really result in the load being shared. It also doesn't work well with the soft irq disable feature of PPC, since EE will stay on until the first interrupt is taken while soft disabled. Set the gconf0 config bit that enables even distribution of interrupts among the two cores. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-12-28[POWERPC] pasemi: Implement NMI supportOlof Johansson
Some PWRficient-based boards have a NMI button that's wired up to a GPIO as interrupt source. By configuring the openpic accordingly, these get delivered as a machine check with high priority, instead of as an external interrupt. The device tree contains a property "nmi-source" in the openpic node for these systems, and it's the (hwirq) source for the input. Also, for these interrupts, the IACK is read from another register than the regular (MCACK instead), but they are EOI'd as usual. So implement said function for the mpic driver. Finally, move a couple of external function defines to include/ instead of local under sysdev. Being able to mask/unmask and eoi directly saves us from setting up a dummy irq handler that will never be called. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-12-24[POWERPC] 4xx: Update defconfigsJosh Boyer
Update the 4xx board defconfigs Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24[POWERPC] 4xx: Minor coding style cleanups for 4xx bootwrapperJosh Boyer
Remove some unneeded braces and make a busy loop more obvious. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24[POWERPC] 4xx: Use machine_device_initcall for bus probeJosh Boyer
Some machine_xx_initcall macros were recently added that check for the machine type before calling the function. This converts the 4xx platforms to use those for bus probing. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24[POWERPC] Remove unneeded variable declarations from mpc837x_mdsJosh Boyer
Remove the declarations for isa_io_base and isa_mem_base as they are declared in pci-common.c now. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24[POWERPC] Conditionally compile e200 and e500 platforms in cputableJosh Boyer
The e200 and e500 platforms are separated in various parts of the kernel with ifdefs, most notably reg_booke.h and traps.c. The new machine_check rework requires them to be similarly separated in cputable.c to avoid compile errors. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24[POWERPC] 4xx: Mark of_bus structures as __initdataJosh Boyer
Mark the of_device_id structures used to probe the various busses on 4xx as __initdata. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Update Kilauea, Rainier, and Walnut defconfigsJosh Boyer
Enable PCI support for these eval boards among other things. Also selects PCI for Rainier in the Kconfig file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Makalu defconfigStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Makalu dtsStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add AMCC Makalu board support to platforms/40xStefan Roese
This patch adds basic support for the AMCC Makalu board to arch/powerpc. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Change Kilauea PCIe bus ranges in dts fileStefan Roese
Currently we have some limitations in the 4xx PCIe driver and can't support all possible PCIe busses. But the current limits in the dts file are quite low (only 16 busses per RC). This patch increases the number to 64 per RC. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add aliases node to 4xx dts filesStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add PCI entry to 440GRx Rainier DTS.Valentine Barshak
This adds PCI entry to PowerPC 440GRx Rainier DTS. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaroundValentine Barshak
Renaming the CPU nodes with generic names put the CPU model in the "model" property and thus broke the PowerPC 440EP(x)/440GR(x) identical PVR workaround. The updates it to use the new model property for CPU identification. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Rename CPU nodes to avoid dtc incompatibilityJosh Boyer
Recent DTC versions disallow certain special characters in full paths without being quoted with {}. That however breaks compatibility with older DTC versions. Work around this by renaming the CPU nodes for the 4xx files to a generic node name, and specify the processor type in the model property of the CPU node. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Set ibpre for 405EX in 4xx PCIe driverStefan Roese
This patch sets the ibpre flag (Inbound Presence) for the 405EX in the 4xx PCIe driver. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add Kilauea PCIe support to dts and KconfigStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Change Kilauea dts to support new EMAC device tree propertiesStefan Roese
The recent changes from Benjamin Herrenschmidt to the ibm_newemac now make it possible to support other 4xx variants by just defining the correct properties in the device tree. In this case of the 405EX we need to define "has-mdio" in the RGMII node and "has-inverted-stacr-oc" and "has-new-stacr-staopc" in the EMAC node same as on the 440EPx. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add 405EX CPU type needed for EMAC support on KilaueaStefan Roese
For EMAC support, 405EX needs to be defined to enable the corresponding EMAC features (IBM_NEW_EMAC_EMAC4, etc.). Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Fix TLB 0 problem with CONFIG_SERIAL_TEXT_DEBUGStefan Roese
Right now TLB entry 0 ist used as UART0 mapping for the early debug output (via CONFIG_SERIAL_TEXT_DEBUG). This causes problems when many TLB's get used upon Linux bootup (e.g. while PCIe scanning behind bridges and/or switches on 440SPe platforms). This will overwrite the TLB 0 entry and further debug output's may crash/hang the system. This patch moves the early debug UART0 TLB entry from 0 to 62 as done in arch/powerpc. This way it is in the "pinned" area and will not get overwritten. Also the arch/ppc/mm/44x_mmu.c code is now synced with the newer code from arch/powerpc. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: libfdt and pci fixes for RainierJosh Boyer
Update the Rainier wrapper for the libfdt merge and add the pci flags to the platform file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Include missing headerJosh Boyer
A small error caused a header file to be removed making sequoia support no longer compile. Fix it. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 44x: Sequoia and Rainier updates for 2.6.25Valentine Barshak
PowerPC 440Epx/GRx Sequoia/Rainier updates for 2.6.25 Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Fix 440grx setup function to call 440A fixupJosh Boyer
The mechanism to do the setup for 440A cores changed recently. This fixes the 440grx setup function to call __fixup_440A_mcheck. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add PCI entry to 440EPx Sequoia DTS.Valentine Barshak
This adds PCI entry to PowerPC 440EPx Sequoia DTS. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 00:21:23 +0000