aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7630): au8522: fix au8522_read_ucblocks for qamMichael Krufky
ucblocks are reported in separate registers for vsb & qam Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7629): au8522: replace __FUNCTION__ with __func__Michael Krufky
replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7628): au8522: codingstyle cleanupsMichael Krufky
Fixed some checkpatch.pl warnings Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7627): au0828: replace __FUNCTION__ with __func__Michael Krufky
replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7626): Kconfig: VIDEO_AU0828 should select DVB_AU8522 and ↵Michael Krufky
DVB_TUNER_XC5000 VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7625): au0828: CleanupSteven Toth
Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7624): Avoid an oops if the board is not fully definedSteven Toth
Avoid an oops if the board is not fully defined. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7623): Scripts to maintain the CARDLIST fileSteven Toth
Scripts to maintain the CARDLIST file. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7622): HVR950Q Hauppauge eeprom supportSteven Toth
HVR950Q Hauppauge eeprom support. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7621): Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USBSteven Toth
Including support for the AU0828 USB Bridge. Including support for the AU8522 ATSC/QAM Demodulator. Including support for the AU8522 ATSC/QAM Demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7620): Adding support for a new i2c bridge typeSteven Toth
Adding support for a new i2c bridge type Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7619): em28xx: adds proper demod IF for HVR-900Mauro Carvalho Chehab
Thanks to Aidan Thornton <makosoft@googlemail.com> for helping to test this firmware Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7618): em28xx: make some symbols staticMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7617): Removes a manual mode setupMauro Carvalho Chehab
The setup is already done at open(). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7616): em28xx-dvb: Properly selects digital mode at the right placeMauro Carvalho Chehab
The driver should be switched to digital mode, when trying to access the frontend or when streaming. This patch provides the correct code to support this feature. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7615): em28xx: Provide the proper support for switching between ↵Mauro Carvalho Chehab
analog/digital Before this patch, HVR900/HVR950 were incorreclty going back to analog. The result is that only digital were working. This patch provides the proper setup for analog/digital and tuner callback. It also properly resets analog into a sane state at open(). Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org> for helping to set the proper parameters to GPO/GPIO em2883 ports. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7614): em28xx-core: fix some debug printk's that wrongly received ↵Mauro Carvalho Chehab
KERN_INFO Those printk's were adding more info to a line that were already being printed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7613): em28xx: rename registersMauro Carvalho Chehab
Now, all registers will follow the same convension: EM28XX_R<reg_number>_<reg_name> This allows to associate a register with its value, and also with a canonical name. Also, registers that are specific to a given chip were renamed accordingly, as EM2800_foo (for 2800 only registers) or EM2880_foo (for registers that started to appear on em2880). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7612): em28xx-cards: use register names for GPIO/GPOMauro Carvalho Chehab
Before this patch, registers 0x04 and 0x08 were referenced by its value. This is bad, since makes harder for someone to understand what this is doing. This patch renames those two registers into an appropriate name. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7611): em28xx: Move registers to a separate fileMauro Carvalho Chehab
em28xx.h contains lots of different stuff inside. The better is to break it on some files. This patch removes the register names, moving them to a separate file. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7610): em28xx: Select reg wait time based on chip IDMauro Carvalho Chehab
This is more conservative than just removing the msleep() from em28xx_write_regs_req(), since some old hardware may still need it. So, it will remove the sleep time only for those chips where this removal were tested. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7609): em28xx-core: speed-up firmware loadDevin Heitmueller
em28xx-core.c: - Remove sleep in i2c message routine which slows down i2c by a factor 10x. Load time for BASE firmware went from 13s to .973s Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7608): em28xx-dvb: Some cleanups and fixesDevin Heitmueller
em28xx-dvb.c: - Remove unneeded xc3028_ctrl structure. The driver automatically preserves the previous value tuner-xc2028.c: - Make the return type for xc2028_get_reg signed, since all of the callers are looking for "< 0" to detect errors. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7607): CodingStyle fixesDouglas Schilling Landgraf
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7606): em28xx-dvb: Program GPO as wellMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7605): tuner-xc3028: Avoids too much firmware reloadsMauro Carvalho Chehab
xc3028_sleep function is being used with a different meaning. This should be called only before doing S1/S3 sleep. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7604): em28xx-dvb: Fix analog modeMauro Carvalho Chehab
The analog entries are wrong. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7603): em28xx-dvb: don't use videobuf-dvbAidan Thornton
Modifies em28xx-dvb not to use videobuf-dvb, but instead to include the code for registering dvb devices locally and use the URB management code in the em28xx driver directly. DVB data streaming should now work. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7602): em28xx: generalise URB setup codeAidan Thornton
Move the URB setup and management code to em28xx-core.c and generalise it slighlty so that the DVB code can use it. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7601): em28xx-dvb: add support for the HVR-900Aidan Thornton
Adds the correct GPIOs and demod attach code for the HVR-900 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7600): em28xx: Sets frequency when changing to analog modeMauro Carvalho Chehab
This will make tuner-xc2028 to change to analog, if needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7599): em28xx-dvb: videobuf callbacks are waiting for em28xx_fhMauro Carvalho Chehab
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> for pointing this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7598): em28xx: several fixes on gpio programmingDevin Heitmueller
em28xx-cards.c: - Fix reversed val/rst values in both analog_gpio and digital_gpio vectors - Fix crash that would was occurring during every analog startup while looping over gpio_ctl - Remove what appears to be a redundant setting of gpio_ctl->val - Don't use OREN538 demodulation for the HVR-950 (prevents ATSC scanning from working) em28xx-dvb.c: - Tuner should be in digital mode when issuing the reset - Add copyright - Change struct definition (corresponds to fix in em28xx-cards.c for gpio_ctl looping) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7597): em28xx: share the same xc3028 setup for analog and digital modesMauro Carvalho Chehab
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> and Aidan Thornton" <makosoft@googlemail.com> for pointing some errors with the previous scenario. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7596): em28xx-dvb: Add support for HVR950Mauro Carvalho Chehab
This patch adds DVB support for Hauppauge HVR950. Thanks to Michael Krufky <mkrufky@linuxtv.org> for getting those values. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7595): Improve generic support for setting gpio valuesMauro Carvalho Chehab
em28xx based devices with xc3028 may require some specific gpio values. This patch adds a generic handling for such values. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7594): em28xx: Fix KconfigMauro Carvalho Chehab
Some devices have msp3400 audio decoder chip. Selects it, if em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7593): em28xx: add a module to handle dvbMauro Carvalho Chehab
This patch adds em28xx-dvb. This driver is highly based on cx88-dvb and saa7134-dvb. This code currently loads and unloads successfully. However, some changes are needed to properly support the mpeg streams and to setup em28xx to work on DVB mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7591): drivers/media/video: use time_before, time_before_eq, etcJulia Lawall
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7590): ir-common: Adds 3 missing IR keys for FlyVIdeo2000Ivan Bobyr
The patch extends the default keymap of FlyVIdeo2000 IR remote control so that this remote may also serve movie & music players in a better way. I bought a SAA7130 TV tuner with a remote control having 3 additional button as the default layout, exactly as: 1) labeled "<<<" : key code 0x19, may be used as "backward"in MPlayer,XMMS etc 2) labeled ">>>" : key code 0x1f, may be used as "forward"... 3) not labeled : key code 0x0a, may be used as "pause"... Once have added these code definitions to the kernel, me got all these operations available for viewing movies & listening music. Signed-off-by : Ivan Bobyr <brefi@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7589): ibmcam: improve support for the IBM PC Camera ProDavid Hilvert
This patch modifies Dmitri's original ibmcam driver for Linux to improve support for the IBM PC Camera Pro. It may also offer improved support for other models classified by the driver as 'Model 3', such as the IBM PC Camera Pro Max. See http://auricle.dyndns.org/xvp610/ Signed-off-by: David Hilvert <dhilvert@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7584): Fix build that occurs when CONFIG_VIDEO_PMS=y and ↵Mauro Carvalho Chehab
VIDEO_V4L2_COMMON=m This patch removes zoran checks for VIDEO_V4L2, since this API is always present, when V4L is selected. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7582): proc: switch /proc/driver/radio-typhoon to seq_file interfaceAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7580): Fix concurrent read from /proc/videocodecsAlexey Dobriyan
Observation one: ->write_proc and ->data assignments aren't needed. Removed. Observation two: codecs lists are unprotected. Patch doesn't fix this. Observation three: /proc/videocodecs printout is done to temporary _global_ buffer which is freed in between. Consequently, two users hitting this file can screwup each other. Steps to reproduce: modprobe videocodec while true; do cat /proc/videocodecs &>/dev/null; done & while true; do cat /proc/videocodecs &>/dev/null; done & The fix is switching to seq_files, this removes code, especially some line-length "logic". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7579): bttv: Fix memory leak in radio_releaseRobert Fitzsimons
Fix the leak of the bttv_fh structure allocated in radio_open which was introduced by commit 5cd3955cb8adfc1edf481e9e1cb2289db50ccacb. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7575a): Revert changeset 4c3b01f71181a52ab7735a7c52b1aa2232826075Mauro Carvalho Chehab
Due to the patch order change, pvrusb2 were broken. So, changeset 4c3b01f71181a52ab7735a7c52b1aa2232826075 were applied at mainstream to fix. After the pvrusb2 changes, this patch is no longer required and should be reverted. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7569): Added support for SkyStar2 rev2.7 and ITD1000 DVB-S tunerPatrick Boettcher
This patches adds support for the SkyStar2 rev2.7 with the PN1010/ITD1000 Frontend. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7471): SkyStar2: preparing support for the rev2.8Patrick Boettcher
Support is prepared, but the CX24113-driver .c-file is missing. After sorting out the NDA problems, the file will be there immediatly. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7575): mt312: add attach-time setting to invert lnb-voltageMatthias Schwarzott
Add a setting to config struct for inversion of lnb-voltage. Needed for support of Avermedia A700 cards. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7574): mt312: Add support for zl10313 demodMatthias Schwarzott
Add zl10313 support to mt312 driver. zl10313 uses 10.111MHz xtal. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 05:00:41 +0000