aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-26sfc: Comment correctionsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26sfc: Strengthen EFX_ASSERT_RESET_SERIALISEDBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26sfc: Treat all MAC registers as 128-bitBen Hutchings
Although all the defined fields in these registers are within 32 bits, they are architecturally defined as 128-bit like most other Falcon registers. In particular, we must use efx_reado() to ensure proper locking when reading MD_STAT_REG. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26sfc: Fix descriptor cache sizesBen Hutchings
These were accidentally undersized by a factor of 2, which limited performance. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26macvlan: export macvlan mode through netlinkArnd Bergmann
In order to support all three modes of macvlan at runtime, extend the existing netlink protocol to allow choosing the mode per macvlan slave interface. This depends on a matching patch to iproute2 in order to become accessible in user land. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26macvlan: implement bridge, VEPA and private modeArnd Bergmann
This allows each macvlan slave device to be in one of three modes, depending on the use case: MACVLAN_PRIVATE: The device never communicates with any other device on the same upper_dev. This even includes frames coming back from a reflective relay, where supported by the adjacent bridge. MACVLAN_VEPA: The new Virtual Ethernet Port Aggregator (VEPA) mode, we assume that the adjacent bridge returns all frames where both source and destination are local to the macvlan port, i.e. the bridge is set up as a reflective relay. Broadcast frames coming in from the upper_dev get flooded to all macvlan interfaces in VEPA mode. We never deliver any frames locally. MACVLAN_BRIDGE: We provide the behavior of a simple bridge between different macvlan interfaces on the same port. Frames from one interface to another one get delivered directly and are not sent out externally. Broadcast frames get flooded to all other bridge ports and to the external interface, but when they come back from a reflective relay, we don't deliver them again. Since we know all the MAC addresses, the macvlan bridge mode does not require learning or STP like the bridge module does. Based on an earlier patch "macvlan: Reflect macvlan packets meant for other macvlan devices" by Eric Biederman. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Patrick McHardy <kaber@trash.net> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26macvlan: cleanup rx statisticsArnd Bergmann
We have very similar code for rx statistics in two places in the macvlan driver, with a third one being added in the next patch. Consolidate them into one function to improve overall readability of the driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26veth: move loopback logic to common locationArnd Bergmann
The veth driver contains code to forward an skb from the start_xmit function of one network device into the receive path of another device. Moving that code into a common location lets us reuse the code for direct forwarding of data between macvlan ports, and possibly in other drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26via-velocity: Bump versionSimon Kagstrom
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26via-velocity: Set tx checksum from ethtool instead of module parameterSimon Kagstrom
Defaults to on (as before). Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26via-velocity: Re-enable transmit scatter-gather supportSimon Kagstrom
The velocity hardware can handle up to 7 memory segments. This can be turned on and off via ethtool. The support was removed in commit 83c98a8cd04dd0f848574370594886ba3bf56750 but is re-enabled and cleaned up here. It's off by default. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26via-velocity: Change DMA_LENGTH_DEF (from the VIA driver)Simon Kagstrom
The VIA driver has changed the default for the DMA_LENGTH_DEF parameter. Together with adaptive interrupt supression and NAPI support, this improves performance quite a bit Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26via-velocity: Implement NAPI supportSimon Kagstrom
This patch adds NAPI support for VIA velocity. The new velocity_poll function also pairs tx/rx handling twice which improves perforamance on some workloads (e.g., netperf UDP_STREAM) significantly (that part is from the VIA driver). Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26via-velocity: Add ethtool interrupt coalescing supportSimon Kagstrom
(Partially from the upstream VIA driver). Tweaking the number of frames-per-interrupt and timer-until-interrupt can reduce the amount of CPU work quite a lot. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26via-velocity: Correct 64-byte alignment for rx buffersSimon Kagstrom
(From the VIA driver). The current code does not guarantee 64-byte alignment since it simply does int add = skb->data & 63; skb->data += add; (via skb_reserve). So for example, if the skb->data address would be 0x10, this would result in 32-byte alignment (0x10 + 0x10). Correct by adding 64 - (skb->data & 63) instead. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25r8169: move PHY regs tables to .rodataAlexey Dobriyan
As side effect, consume less stack. -rtl8169_get_mac_version [vmlinux]: 432 -rtl8169_init_one [vmlinux]: 376 +rtl8169_init_one [vmlinux]: 136 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25xfrm: Add SHA384 and SHA512 HMAC authentication algorithms to XFRMMartin Willi
These algorithms use a truncation of 192/256 bits, as specified in RFC4868. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25xfrm: Use the user specified truncation length in ESP and AHMartin Willi
Instead of using the hardcoded truncation for authentication algorithms, use the truncation length specified on xfrm_state. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25xfrm: Store aalg in xfrm_state with a user specified truncation lengthMartin Willi
Adding a xfrm_state requires an authentication algorithm specified either as xfrm_algo or as xfrm_algo_auth with a specific truncation length. For compatibility, both attributes are dumped to userspace, and we also accept both attributes, but prefer the new syntax. If no truncation length is specified, or the authentication algorithm is specified using xfrm_algo, the truncation length from the algorithm description in the kernel is used. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25xfrm: Define new XFRM netlink auth attribute with specified truncation bitsMartin Willi
The new XFRMA_ALG_AUTH_TRUNC attribute taking a xfrm_algo_auth as argument allows the installation of authentication algorithms with a truncation length specified in userspace, i.e. SHA256 with 128 bit instead of 96 bit truncation. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25net: convert /proc/net/rt_acct to seq_fileAlexey Dobriyan
Rewrite statistics accumulation to be in terms of structure fields, not raw u32 additions. Keep them in same order, though. This is the last user of create_proc_read_entry() in net/, please NAK all new ones as well as all new ->write_proc, ->read_proc and create_proc_entry() users. Cc me if there are problems. :-) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25net: use net_eq to compare netsOctavian Purdila
Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-11-24net/ipv6: Move && and || to end of previous lineJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Log interrupt and reset type names, not numbersBen Hutchings
Define name tables for these enumerations in a similar way as for loopback. Move the loopback name table together with them. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Combine high-level header filesBen Hutchings
All files that include ethtool.h, rx.h or tx.h are also including efx.h, and there is no good reason to separate out the few declarations they contain. Therefore fold them into efx.h. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove redundant efx_xmit() functionBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove unnecessary casts to struct sk_buff *Ben Hutchings
At some point these casts were used to remove const qualification, but they are now unneeded. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Gather link state fields in struct efx_nic into new struct efx_link_stateBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Move all I2C stuff into struct falcon_boardBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Move struct falcon_board into struct falcon_nic_dataBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Move definition of struct falcon_nic_data into falcon.hBen Hutchings
This is preparation for moving Falcon-specific state required by other Falcon-specific code. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Make board information explicitly Falcon-specificBen Hutchings
Rename struct efx_board to struct falcon_board. Introduce and use inline function to look up board info from struct efx_nic, in preparation for moving it. Move board init and fini calls into NIC probe and remove functions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Rename efx_board::init_leds to init_phy and use for SFN4111TBen Hutchings
efx_board::init_leds was introduced as a second stage of initialisation because of the inter-dependency between the board and PHY. We want to move board initialisation into NIC probing, which is too early to use MDIO, so SFN4111T initialisation also needs to be split. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Use a single blink implementationBen Hutchings
Only some PHYs have firmware support for a LED blink mode, so we currently blink the others in a timer function. Since all PHYs have simple on and off modes, we don't gain anything by using multiple blink implementations. Also, since we have a process context there is no need to use a timer. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: SFT9001: Reset LED configuration correctly after blinkingBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Record RX queue number on GRO pathBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Move assertions and buffer cleanup earlier in efx_rx_packet_lro()Ben Hutchings
This removes the need to use a label and goto, and makes the two branches mirror each other more closely. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove ridiculously paranoid assertionsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove redundant gotos from __efx_rx_packet()Ben Hutchings
This function no longer has any common cleanup code. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24sfc: Remove pointless abstraction of memory BAR number (2)Ben Hutchings
Finish the job by removing the structure member. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23ath9k: set ps_default as falseJohn W. Linville
Copied from original one-line patch here: http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26 (This is for 2.6.33 and beyond, where the bool was changed to a flag by "cfg80211: convert bools into flags". -- JWL) Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23ssb: Fix range check in sprom writeMichael Buesch
The range check in the sprom image parser hex2sprom() is broken. One sprom word is 4 hex characters. This fixes the check and also adds much better sanity checks to the code. We better make sure the image is OK by doing some sanity checks to avoid bricking the device by accident. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23ssb: Fix SPROM writingMichael Buesch
The SPROM writing routines were broken since we rewrote the suspend handling on wireless devices, because SPROM writing depended on suspend. This patch changes it and freezes devices with the driver remove(), probe() callbacks instead. This also simplifies the whole logics a lot. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23rndis_wlan: disable stall workaroundJussi Kivilinna
Stall workaround doesn't work with bcm4320a devices like with bcm4320b. This workaround actually causes more stalls/device freeze on bcm4320a. Therefore disable stall workaround by default. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23rndis_wlan: fix buffer overflow in rndis_query_oidJussi Kivilinna
rndis_query_oid overwrites *len which stores buffer size to return full size of received command and then uses *len with memcpy to fill buffer with command. Ofcourse memcpy should be done before replacing buffer size. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23mac80211: Fix missing kernel-doc notationJaswinder Singh Rajput
Fix the following htmldocs warnings: Warning(net/mac80211/sta_info.h:322): No description found for parameter 'drv_unblock_wk' Warning(net/mac80211/sta_info.h:322): No description found for parameter 'drv_unblock_wk' Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John W. Linville <linville@tuxdriver.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: remove reset led_tpt from iwl_leds_init()Wey-Yi Guy
Current blinking rate is calculated based on the difference between current tx/rx byte counts and priv->led_tpt. priv->led_tpt should not get reset in iwl_leds_init(), this function can be called by bring interface "up" or "down", or when uCode sysassert occurred. resetting the led_tpt parameter will introduce incorrect led blinking behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: change message for cmd queue full errorWey-Yi Guy
Change error message for command queue full Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23iwlwifi: print limited number of event log when uCode errorWey-Yi Guy
To help iwlagn uCode debugging, event log will dump to syslog when driver detect uCode error occurred, but this only happen when compile with CONFIG_IWLWIFI_DEBUG and debug flag is enabled; which is not always the case. Also, there is another problem, if the flag is set, the entire event log buffer will be dump to syslog, it can flood the syslog and make it very difficult to debug the problem. Change the default to only dump last 20 entries of event log to syslog unless the following condition meets: 1. both compile with CONFIG_IWLWIFI_DEBUG and debug flag is enabled, and then dump the entire event buffer to syslog. 2. dump event log request from debugfs Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 09:49:49 +0000