aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-11-13[BONDING]: Fix resource use after freeJay Vosburgh
Fix bond_destroy and bond_free_all to not reference the struct net_device after calling unregister_netdevice. Bug and offending change reported by Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[SYSCTL]: Fix warning for token-ring from sysctl checkerOlof Johansson
As seen when booting ppc64_defconfig: sysctl table check failed: /net/token-ring .3.14 procname does not match binary path procname Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[NET] random : secure_tcp_sequence_number should not assume CONFIG_KTIME_SCALAREric Dumazet
All 32 bits machines but i386 dont have CONFIG_KTIME_SCALAR. On these machines, ktime.tv64 is more than 4 times the (correct) result given by ktime_to_ns() Again on these machines, using ktime_get_real().tv64 >> 6 give a 32bits rollover every 64 seconds, which is not wanted (less than the 120 s MSL) Using ktime_to_ns() is the portable way to get nsecs from a ktime, and have correct code. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[IWLWIFI]: Not correctly dealing with hotunplug.Oliver Neukum
It makes no sense to enable interrupts if a device has been unplugged. In addition if in doubt IRQ_HANDLED should be returned. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[TCP] FRTO: Plug potential LOST-bit leakIlpo Järvinen
It might be possible that, in some extreme scenario that I just cannot now construct in my mind, end_seq <= frto_highmark check does not match causing the lost_out and LOST bits become out-of-sync due to clearing and recounting in the loop. This may fix LOST-bit leak reported by Chazarain Guillaume <guichaz@yahoo.fr>. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[TCP] FRTO: Limit snd_cwnd if TCP was application limitedIlpo Järvinen
Otherwise TCP might violate packet ordering principles that FRTO is based on. If conventional recovery path is chosen, this won't be significant at all. In practice, any small enough value will be sufficient to provide proper operation for FRTO, yet other users of snd_cwnd might benefit from a "close enough" value. FRTO's formula is now equal to what tcp_enter_cwr() uses. FRTO used to check application limitedness a bit differently but I changed that in commit 575ee7140dabe9b9c4f66f4f867039b97e548867 and as a result checking for application limitedness became completely non-existing. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[E1000]: Fix schedule while atomic when called from mii-tool.Jesse Brandeburg
mii-tool can cause the driver to call msleep during nway reset, bugzilla.kernel.org bug 8430. Fix by simply calling reinit_locked outside of the spinlock, which is safe from ethtool, so it should be safe from here. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[NETX]: Fix build failure added by 2.6.24 statistics cleanup.David S. Miller
Reported by rmk from kautobuild output: drivers/net/netx-eth.c: In function 'netx_eth_hard_start_xmit': drivers/net/netx-eth.c:131: error: 'dev' undeclared (first use in this function) drivers/net/netx-eth.c:131: error: (Each undeclared identifier is reported only once drivers/net/netx-eth.c:131: error: for each function it appears in.) drivers/net/netx-eth.c: In function 'netx_eth_receive': drivers/net/netx-eth.c:158: error: 'dev' undeclared (first use in this function) Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[EP93xx_ETH]: Build fix after 2.6.24 NAPI changes.David S. Miller
Reported by rmk from kautobuild output: drivers/net/arm/ep93xx_eth.c:420: error: implicit declaration of function '__netif_rx_schedule_prep' Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[PKT_SCHED]: Check subqueue status before calling hard_start_xmitPeter P Waskiewicz Jr
The only qdiscs that check subqueue state before dequeue'ing are PRIO and RR. The other qdiscs, including the default pfifo_fast qdisc, will allow traffic bound for subqueue 0 through to hard_start_xmit. The check for netif_queue_stopped() is done above in pkt_sched.h, so it is unnecessary for qdisc_restart(). However, if the underlying driver is multiqueue capable, and only sets queue states on subqueues, this will allow packets to enter the driver when it's currently unable to process packets, resulting in expensive requeues and driver entries. This patch re-adds the check for the subqueue status before calling hard_start_xmit, so we can try and avoid the driver entry when the queues are stopped. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (i5k_amb) Convert macros to C functions hwmon: (w83781d) Add missing curly braces hwmon: (abituguru3) Identify ABit IP35 Pro as such hwmon: (f75375s) pwmX_mode sysfs files writable for f75375 variant hwmon: (f75375s) On n2100 systems, set fans to full speed on boot hwmon: (f75375s) Allow setting up fans with platform_data hwmon: (f75375s) Add new style bindings hwmon: (lm70) Convert semaphore to mutex hwmon: (applesmc) Add support for Mac Pro 2 x Quad-Core hwmon: (abituguru3) Add support for 2 new motherboards hwmon: (ibmpex) Change printk to dev_{info,err} macros hwmon: (i5k_amb) New memory temperature sensor driver hwmon: (f75375s) fix pwm mode setting hwmon: (ibmpex.c) fix NULL dereference hwmon: (sis5595) Split sis5595_attributes_opt hwmon: (sis5595) Add individual alarm files hwmon: (w83627hf) push nr+1 offset into *_REG_FAN macros and simplify hwmon: (w83627hf) hoist nr-1 offset out of show-store-temp-X hwmon: Add power meter spec to Documentation/hwmon/sysfs-interface
2007-11-13Merge branch 'master' of ā†µLinus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits) [NETFILTER]: xt_time should not assume CONFIG_KTIME_SCALAR [NET]: Move unneeded data to initdata section. [NET]: Cleanup pernet operation without CONFIG_NET_NS [TEHUTI]: Fix incorrect usage of strncat in bdx_get_drvinfo() [MYRI_SBUS]: Prevent that myri_do_handshake lies about ticks. [NETFILTER]: bridge: fix double POSTROUTING hook invocation [NETFILTER]: Consolidate nf_sockopt and compat_nf_sockopt [NETFILTER]: nf_nat: fix memset error [INET]: Use list_head-s in inetpeer.c [IPVS]: Remove unused exports. [NET]: Unexport sysctl_{r,w}mem_max. [TG3]: Update version to 3.86 [TG3]: MII => TP [TG3]: Add A1 revs [TG3]: Increase the PCI MRRS [TG3]: Prescaler fix [TG3]: Limit 5784 / 5764 to MAC LED mode [TG3]: Disable GPHY autopowerdown [TG3]: CPMU adjustments for loopback tests [TG3]: Fix nvram selftest failures ...
2007-11-13Merge branch 'merge' of ā†µLinus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Silence an annoying boot message [POWERPC] Fix early btext debug on PowerMac [POWERPC] Demote clockevent printk to KERN_DEBUG [POWERPC] Fix CONFIG_SMP=n build error on ppc64 [POWERPC] Avoid unpaired stwcx. on some processors [POWERPC] Fix oops related to 4xx flush_tlb_page modification [POWERPC] cpm: Fix a couple minor issues in cpm_common.c. [POWERPC] Add -mno-spe for ARCH=powerpc builds
2007-11-13ACPI: Battery: remove cycle from battery removal.Alexey Starikovskiy
get_property() should not call battery_update(), it also should call get_status() only if battery is present to avoid cycle and oops. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Acked-by: Johannes Weiner <hannes@saeurebad.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-13Revert "ext2/ext3/ext4: add block bitmap validation"Linus Torvalds
This reverts commit 7c9e69faa28027913ee059c285a5ea8382e24b5d, fixing up conflicts in fs/ext4/balloc.c manually. The cost of doing the bitmap validation on each lookup - even when the bitmap is cached - is absolutely prohibitive. We could, and probably should, do it only when adding the bitmap to the buffer cache. However, right now we are better off just reverting it. Peter Zijlstra measured the cost of this extra validation as a 85% decrease in cached iozone, and while I had a patch that took it down to just 17% by not being _quite_ so stupid in the validation, it was still a big slowdown that could have been avoided by just doing it right. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-13[NETFILTER]: xt_time should not assume CONFIG_KTIME_SCALAREric Dumazet
It is not correct to assume one can get nsec from a ktime directly by using .tv64 field. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[NET]: Move unneeded data to initdata section.Denis V. Lunev
This patch reverts Eric's commit 2b008b0a8e96b726c603c5e1a5a7a509b5f61e35 It diets .text & .data section of the kernel if CONFIG_NET_NS is not set. This is safe after list operations cleanup. Signed-of-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[NET]: Cleanup pernet operation without CONFIG_NET_NSDenis V. Lunev
If CONFIG_NET_NS is not set, the only namespace is possible. This patch removes list of pernet_operations and cleanups code a bit. This list is not needed if there are no namespaces. We should just call ->init method. Additionally, the ->exit will be called on module unloading only. This case is safe - the code is not discarded. For the in/kernel code, ->exit should never be called. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[TEHUTI]: Fix incorrect usage of strncat in bdx_get_drvinfo()Roel Kluin
Fix incorrect length for strncat by replacing it with strlcat Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[MYRI_SBUS]: Prevent that myri_do_handshake lies about ticks.Roel Kluin
With '<=' tick can be incremented up to 26, The last loop is redundant since even when 'softstate' becomes 'STATE_READY', 'if (tick > 25)' will still cause the function to return -1, Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[NETFILTER]: bridge: fix double POSTROUTING hook invocationPatrick McHardy
Packets routed between bridges have the POST_ROUTING hook invoked twice since bridging mistakes them for bridged packets because they have skb->nf_bridge set. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[NETFILTER]: Consolidate nf_sockopt and compat_nf_sockoptPavel Emelyanov
Both lookup the nf_sockopt_ops object to call the get/set callbacks from, but they perform it in a completely similar way. Introduce the helper for finding the ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[NETFILTER]: nf_nat: fix memset errorLi Zefan
The size passing to memset is the size of a pointer. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[INET]: Use list_head-s in inetpeer.cPavel Emelyanov
The inetpeer.c tracks the LRU list of inet_perr-s, but makes it by hands. Use the list_head-s for this. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[IPVS]: Remove unused exports.Adrian Bunk
This patch removes the following unused EXPORT_SYMBOL's: - ip_vs_try_bind_dest - ip_vs_find_dest Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[NET]: Unexport sysctl_{r,w}mem_max.Adrian Bunk
sysctl_{r,w}mem_max can now be unexported. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[POWERPC] Silence an annoying boot messageStephen Rothwell
vmemmap_populate will printk (with KERN_WARNING) for a lot of pages if CONFIG_SPARSEMEM_VMEMMAP is enabled (at least it does on iSeries). Use pr_debug for it instead. Replace the only other use of DBG in this file with pr_debug as well. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-12[TG3]: Update version to 3.86Matt Carlson
This patch updates the version number to 3.86 Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13[POWERPC] Fix early btext debug on PowerMacBenjamin Herrenschmidt
The early btext debug wouldn't work on PowerMac when booted from BootX due to the code looking for the wrong property name. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13[POWERPC] Demote clockevent printk to KERN_DEBUGTony Breeds
These don't need to be seen by everyone on every boot. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13[POWERPC] Fix CONFIG_SMP=n build error on ppc64Olof Johansson
The patch "KVM: fix !SMP build error" change the way smp_call_function() actually uses the passed in function names on non-SMP builds. So previously it was never caught that the function passed in was never actually defined. This causes a build error on ppc64_defconfig + CONFIG_SMP=n: arch/powerpc/mm/tlb_64.c: In function 'pgtable_free_now': arch/powerpc/mm/tlb_64.c:71: error: 'pte_free_smp_sync' undeclared (first use in this function) arch/powerpc/mm/tlb_64.c:71: error: (Each undeclared identifier is reported only once arch/powerpc/mm/tlb_64.c:71: error: for each function it appears in.) So we need to define it even if CONFIG_SMP is off. Either that or ifdef out the smp_call_function() call, but that's ugly. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13[POWERPC] Avoid unpaired stwcx. on some processorsBecky Bruce
The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-12[TG3]: MII => TPMatt Carlson
This patch changes the PHY type reported through ethtool for copper devices from MII to TP. The latter is more accurate. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: Add A1 revsMatt Carlson
This patch adds the A1 revision of 5784, 5764, and 5761, and applies all previous bugfixes. In places where the list of devices gets too long, the patch uses a new TG3_FLG3_5761_5784_AX_FIXES flag instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: Increase the PCI MRRSMatt Carlson
Previous devices hardcoded the PCI Maximum Read Request Size to 4K. To better comply with the PCI spec, the hardware now defaults the MRRS to 512 bytes. This will yield poor driver performance if left untouched. This patch increases the MRRS to 4K on driver initialization. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: Prescaler fixMatt Carlson
Internal hardware timers become inaccurate after link events. Clock frequency switches performed by the CPMU fail to adjust timer prescalers. The fix is to detect core clock frequency changes during link events and adjust the timer prescalers accordingly. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: Limit 5784 / 5764 to MAC LED modeMatt Carlson
Most 5784 / 5764 LED modes do not work as expected because of a hardware bug. This patch forces the LED mode to be in MAC LED mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: Disable GPHY autopowerdownMatt Carlson
New CPMU devices contend with the GPHY for power management. The GPHY autopowerdown feature is enabled by default in the PHY and thus needs to be disabled after every PHY reset. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: CPMU adjustments for loopback testsMatt Carlson
This patch adds the LINK_SPEED mode to the list of CPMU modes that can cause the loopback tests to fail. These bugs are planned to be fixed in future revisions of the chip, so the patch qualifies the fixes as such. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: Fix nvram selftest failuresMatt Carlson
Newer devices contain bootcode in the chip's private ROM area. This bootcode is called selfboot. Selfboot can be patched in the device's NVRAM and the patches can have several formats. In one particular format, the checksum calculation needs to be slightly modified. This patch adjusts the NVRAM test code for that case, and add support for the missing formats. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: 5784 / 5764 DMA engine lockup fixMatt Carlson
5784 and 5764 devices lock up when the link speed is 10Mbps, the CPMU link speed mode is enabled, and the MAC clock is running at 1.5Mhz. The fix is to run the MAC clock at faster speeds. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: APE flag fixMatt Carlson
This patch corrects a bug where the ENABLE_APE flag was tested against the wrong flag variable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: 5784 / 5764 GPHY power down fixMatt Carlson
5784 and 5764 devices fail to link / pass traffic after one load / unload cycle. This happens because of a hardware bug in the new CPMU. During normal operation, the MAC depends on the PHY clock being available. When the PHY is powered down, the clock the MAC depends on is disabled. The fix is to switch the MAC clock to an alternate source before powering down the PHY, and to restore the MAC clock to the PHY source upon device resume. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[TG3]: Fix 5761 PXEboot crashMatt Carlson
When 5761 devices boot the machine using PXEboot, PXE leaves the device active when it terminates. The tg3 driver has code to detect this condition and resets the device during initialization. On 5761 devices, device resets involve sending a driver state update message to the APE on the 5761. However, during this initialization stage, communications to the APE registers have not yet been set up. The driver then dereferences a NULL pointer and crashes the machine. The fix is to move the APE register access setup earlier in the initialization code to cover this condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[AF_PACKET]: Fix minor code duplicationUrs Thuermann
Simplify some code by eliminating duplicate if-else clauses in packet_do_bind(). Signed-off-by: Urs Thuermann <urs@isnogud.escape.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[NET]: Remove references to net-modules.txt.Adrian Bunk
When I removed net-modules.txt because it only contained ancient information I missed that many Kconfig entries pointed to this ancient information. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12[INET]: Remove leftover prototypes from include/net/inet_common.hArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13Merge branch 'for-2.6.24' of ā†µPaul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
2007-11-12Merge branch 'pending' of ā†µDavid S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-dev
2007-11-12[NET]: Add the helper kernel_sock_shutdown()Trond Myklebust
...and fix a couple of bugs in the NBD, CIFS and OCFS2 socket handlers. Looking at the sock->op->shutdown() handlers, it looks as if all of them take a SHUT_RD/SHUT_WR/SHUT_RDWR argument instead of the RCV_SHUTDOWN/SEND_SHUTDOWN arguments. Add a helper, and then define the SHUT_* enum to ensure that kernel users of shutdown() don't get confused. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 05:21:43 +0000