aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-26[SCSI] qla2xxx: Correct fcport state-management during loss.Seokmann Ju
All fcport->state management should be done within qla2x00_mark_device_lost(), the assignment of state within qla2x00_mark_vp_devices_dead() caused associated rports to not be removed. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Always aquire the parent's hardware_lock.Seokmann Ju
While issuing a marker, manipulating the request/response queues and modifying the outstanding command array. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Swap enablement order of EFT and FCE.Andrew Vasquez
The firmware group has suggested that FCE (Fibre Channel Event) tracing be enabled prior to EFT (Extended Firmware Tracing) to maximize the capturing of data on the wire. This change has no real semantic effect on driver operation, as it's mostly a shuffling of code. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Retrieve board serial-number and description from VPD.Joe Carnuccio
Recent ISPs have this information written at manufacturing time, so use the information. This also reduces future churn of the qla_devtbl.h file contents, as the driver can now depend on the information to be present in VPD. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Allow the user the option of disabling iIDMA.Andrew Vasquez
iIDMA support requires the driver issue several additional fabric-managegment (FM) commands per port discovered during SNS scanning -- GFPN (Get Fabric Port Name) and GPSC (Get Port Speed Capabilities). It has been found during testing that some switches do not respond as *well* as expected to these commands (silence -- no ACC nor BS_RJT). So, to handle such conditions, allow the user the ability to indirectly disable the FM commands by disabling iIDMA with the ql2xiidmaenable module-parameter. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Cleanup NPIV related functionsSeokmann Ju
Removed repeated or unnecessary operations during vport creation/deletion. Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Add LIP count to FC-transport statistics.Harish Zunjarrao
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Track total number of ISP aborts.Harish Zunjarrao
This parameter counts the total number of ISP aborts during driver execution. The value is exported through a DEVICE_ATTR() off the scsi_host. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Set an rport's dev_loss_tmo value in a consistent manner.Andrew Vasquez
As there's no point in adding a fixed-fudge value (originally 5 seconds), honor the user settings only. We also remove the driver's dead-callback get_rport_dev_loss_tmo function (qla2x00_get_rport_loss_tmo()). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Add dev_loss_tmo_callbk/terminate_rport_io callback support.Seokmann Ju
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Correct locking during NVRAM manipulation.Andrew Vasquez
Commit 2c96d8d0c17978bbf5eb82314d488f46d4a51280 pushed the acquisition of hardware_lock to too fine a level, which in turn will cause problems with cond_resched()s added with 40a2e34a94c336b716f631b2952d233e1ba76e3c. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-25x86_64: fix ia32 AMD syscall audit fast-pathRoland McGrath
The new code in commit 5cbf1565f29eb57a86a305b08836613508e294d7 has a bug in the version supporting the AMD 'syscall' instruction. It clobbers the user's %ecx register value (with the %ebp value). This change fixes it. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipsec: ipcomp - Decompress into frags if necessary ipsec: ipcomp - Merge IPComp implementations pkt_sched: Fix locking in shutdown_scheduler_queue()
2008-07-25MFD_TC6393XB is ARM-onlyAdrian Bunk
Compile error on other architectures: CC drivers/mfd/tc6393xb.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c: In function ‘tc6393xb_attach_irq’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c:324: error: implicit declaration of function ‘set_irq_flags’ ... Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix boot problem due to AT_BASE_PLATFORM change
2008-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Wire up new system calls.
2008-07-25Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Wire up new system calls
2008-07-25sys_paccept definition missing __user annotationHarvey Harrison
Introduced by commit aaca0bdca573f3f51ea03139f9c7289541e7bca3 ("flag parameters: paccept"): net/socket.c:1515:17: error: symbol 'sys_paccept' redeclared with different type (originally declared at include/linux/syscalls.h:413) - incompatible argument 4 (different address spaces) Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26powerpc: Fix boot problem due to AT_BASE_PLATFORM changeNathan Lynch
Commit 9115d13453dee22473a1e8cacc90a8d64a9c4bc9 ("powerpc: Enable AT_BASE_PLATFORM aux vector") broke boot on 32-bit powerpc systems; we have to use PTRRELOC to initialize powerpc_base_platform this early in boot. Bug reported by Jon Smirl. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-25sparc: Wire up new system calls.David S. Miller
This wires up the recently added Wire up signalfd4, eventfd2, epoll_create1, dup3, pipe2, and inotify_init1 system calls. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25Merge git://git.infradead.org/embedded-2.6Linus Torvalds
* git://git.infradead.org/embedded-2.6: Make console charset translation optional
2008-07-25Merge git://git.infradead.org/~dwmw2/random-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/random-2.6: remove dummy asm/kvm.h files firmware: create firmware binaries during 'make modules'.
2008-07-25bootmem: Move node allocation macros back to !HAVE_ARCH_BOOTMEM_NODEJohannes Weiner
These got unintentionally moved, put them back as x86 provides its own versions. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25remove dummy asm/kvm.h filesAdrian Bunk
This patch removes the dummy asm/kvm.h files on architectures not (yet) supporting KVM and uses the same conditional headers installation as already used for a.out.h . Also removed are superfluous install rules in the s390 and x86 Kbuild files (they are already in Kbuild.asm). Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25signalfd: fix undefined reference to `compat_sys_signalfd4' when ↵Ingo Molnar
!CONFIG_SIGNALFD fix: arch/x86/ia32/built-in.o: In function `ia32_sys_call_table': (.rodata+0xa38): undefined reference to `compat_sys_signalfd4' on !CONFIG_SIGNALFD. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25mm/hugetlb.c: fix build failure with !CONFIG_SYSCTLIngo Molnar
on !CONFIG_SYSCTL on x86 with latest -git i get: mm/hugetlb.c: In function 'decrement_hugepage_resv_vma': mm/hugetlb.c:83: error: 'reserve' undeclared (first use in this function) mm/hugetlb.c:83: error: (Each undeclared identifier is reported only once mm/hugetlb.c:83: error: for each function it appears in.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25firmware: create firmware binaries during 'make modules'.David Woodhouse
This means that we no longer need write access to the source tree while doing 'make modules_install'. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc: Wireup new syscalls Move update_mmu_cache() declaration from tlbflush.h to pgtable.h powerpc/pseries: Remove kmalloc call in handling writes to lparcfg powerpc/pseries: Update arch vector to indicate support for CMO ibmvfc: Add support for collaborative memory overcommit ibmvscsi: driver enablement for CMO ibmveth: enable driver for CMO ibmveth: Automatically enable larger rx buffer pools for larger mtu powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O powerpc/pseries: vio bus support for CMO powerpc/pseries: iommu enablement for CMO powerpc/pseries: Add CMO paging statistics powerpc/pseries: Add collaborative memory manager powerpc/pseries: Utilities to set firmware page state powerpc/pseries: Enable CMO feature during platform setup powerpc/pseries: Split retrieval of processor entitlement data into a helper routine powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg powerpc: Fix compile error with binutils 2.15 ... Fixed up conflict in arch/powerpc/platforms/52xx/Kconfig manually.
2008-07-25Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6: (22 commits) UBI: always start the background thread UBI: fix gcc warning UBI: remove pre-sqnum images support UBI: fix kernel-doc errors and warnings UBI: fix checkpatch.pl errors and warnings UBI: bugfix - do not torture PEB needlessly UBI: rework scrubbing messages UBI: implement multiple volumes rename UBI: fix and re-work debugging stuff UBI: amend commentaries UBI: fix error message UBI: improve mkvol request validation UBI: add ubi_sync() interface UBI: fix 64-bit calculations UBI: fix LEB locking UBI: fix memory leak on error path UBI: do not forget to free internal volumes UBI: fix memory leak UBI: avoid unnecessary division operations UBI: fix buffer padding ...
2008-07-25Fix ahci driver 'flags' typeLinus Torvalds
The new type checking of the flags arguments to irqsave and friends (commit 3f307891ce0e7b0438c432af1aacd656a092ff45) pointed out this thing with a big nice warning. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: mpc85xx fix pci ofdev 2nd passDave Jiang
Convert PCI err device from platform to open firmware of_dev to comply with powerpc schemes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: mv64x60 add pci fixupDave Jiang
Fixup of missing bit 0 on 64360 PCIx_ERR_MASK and errata FEr-#11 and FEr-#16 for the 64460. Bit 0 must remain 0. Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: mv64x60 fix get_propertyDave Jiang
Update get_property() call to use of_get_property() in order to fix compile Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: e752x fix too loud on nonmemory errorsDoug Thompson
This module harvests more than just memory errors, it also harvests various bus and dma errors that the Chipset detects. Previously, it would report all such errors, which would cause output to be TOO loud. This patches therefore adds a parameter which is used to turn off NON-MEMORY error reports by default. Or the reporting can be enabled via the parameter Also did code style cleanup: less than 80 characters per line rule Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix added newline to sysfs dimm labelsArthur Jones
The channel DIMM label does not seem to be used much in the edac code. However, where it is used (in the core code), it is assumed to not have a newline embedded. This leaves the sysfs file newline free which looks funny when cat'ing it. Here we just add the trailing newline to the sysfs chX_dimm_label output... [Doug Thompson note: the DIMM label is one of the primary uses of EDAC. User space daemon scripts, edac-utils@sourceforge, populate the DIMM label fields, via /sys/devices/system/edac attributes, with the silk screen labels of the motherboard in use. dmidecode access BIOS tables, but BIOS tables are well known to be incorrect and useless in these respects. edac-utils will strip off any newlines before its use of the output, when displaying DIMM slot silk screen labels. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix static to dynamic ksetArthur Jones
Static kobjects and ksets are not supported in Linux kernel. Convert the mc_kset from static to dynamic. This patch depends on my previous patch to remove the module parameter attributes from mc... Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix redundant sysfs controls to parametersArthur Jones
/sys/devices/system/edac/mc has a few files which are duplicated in /sys/module/edac_core/parameters. Now that all the functionality is duplicated between these two locations, we remove the former kobject attributes and update the documentation. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix workq timerArthur Jones
When updating the edac_mc_poll_msec module parameter from the sysfs /sys/module/edac_core/parameters/edac_mc_poll_msec file, we don't update the workq timers. So that, if we move from a big poll time to a small one, the small one won't take effect until the big one has timed out. Here we provide a new module parameter set method to call out to the update routine. This brings the /sys/module/edac_core/parameters functionality up to that provided by the /sys/drivers/system/edac/mc sysfs module parameter files so that we can remove them or at least link to the /sys/module files... Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix to use dynamic kobjectArthur Jones
Static kobjects are not supported in linux kernel. Convert the edac_pci_top_main_kobj from static to dynamic. This avoids the double free of the edac_pci_top_main_kobj.name that we see on module reload of the e752x edac driver (and probably others as well). In addition Greg KH <greg@kroah.com> has pointed out that this code may be cleaned up significantly. I will look at that as a follow-on patch, for now, I just want the minimum fix to get this double-free oops bug squashed... Many thanks to Greg KH for his patience in showing me what the Documentation/kobject.txt already said (oops)... Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100: cleanupArthur Jones
Some code cleanliness issues found by Andrew Morton (thanks!) which should not affect functionality, but which should help make the code more maintainable. In particular, we now: * convert all #define's w/ a parameter to static inlines * use 1UL rather than 1ULL when calculating an unsigned long * use pci_disable_device The resulting code is tested and seems to work fine... Signed-off-by: Arthur Jones <ajones@riverbed.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix unmask ecc bitsArthur Jones
Explicitly unmask ECC errors we are interested in reporting. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix enable ecc hardwareArthur Jones
It is possible that the BIOS did not enable ECC at boot time. We check for that case and fail to load if it is true. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix missing bitsArthur Jones
The error mask we use to trigger ECC notifications is missing many bits of interest. We add these bits here so that all possible ECC errors can be reported. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 new intel chipset driverArthur Jones
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fuse: lockd supportMiklos Szeredi
If fuse filesystem doesn't define it's own lock operations, then allow the lock manager to work with fuse. Adding lockd support for remote locking is also possible, but more rarely used, so leave it till later. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Matthew Wilcox <matthew@wil.cx> Cc: David Teigland <teigland@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fuse: nfs export special lookupsMiklos Szeredi
Implement the get_parent export operation by sending a LOOKUP request with ".." as the name. Implement looking up an inode by node ID after it has been evicted from the cache. This is done by seding a LOOKUP request with "." as the name (for all file types, not just directories). The filesystem can set the FUSE_EXPORT_SUPPORT flag in the INIT reply, to indicate that it supports these special lookups. Thanks to John Muir for the original implementation of this feature. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Matthew Wilcox <matthew@wil.cx> Cc: David Teigland <teigland@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fuse: add fuse_lookup_name() helperMiklos Szeredi
Add a new helper function which sends a LOOKUP request with the supplied name. This will be used by the next patch to send special LOOKUP requests with "." and ".." as the name. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fuse: add export operationsMiklos Szeredi
Implement export_operations, to allow fuse filesystems to be exported to NFS. This feature has been in the out-of-tree fuse module, and is widely used and tested. It has not been originally merged into mainline, because doing the NFS export in userspace was thought to be a cleaner and more efficient way of doing it, than through the kernel. While that is true, it would also have involved a lot of duplicated effort at reimplementing NFS exporting (all the different versions of the protocol). This effort was unfortunately not undertaken by anyone, so we are left with doing it the easy but less efficient way. If this feature goes in, the out-of-tree fuse module can go away, which would have several advantages: - not having to maintain two versions - less confusion for users - no bugs due to kernel API changes Comment from hch: - Use the same fh_type values as XFS, since we use the same fh encoding. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fuse: prepare lookup for nfs exportMiklos Szeredi
Use d_splice_alias() instead of d_add() in fuse lookup code, to allow NFS exporting. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25locks: allow ->lock() to return FILE_LOCK_DEFERREDMiklos Szeredi
Allow filesystem's ->lock() method to call posix_lock_file() instead of posix_lock_file_wait(), and return FILE_LOCK_DEFERRED. This makes it possible to implement a such a ->lock() function, that works with the lock manager, which needs the call to be asynchronous. Now the vfs_lock_file() helper can be used, so this is a cleanup as well. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Matthew Wilcox <matthew@wil.cx> Cc: David Teigland <teigland@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 13:09:00 +0000