aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-05Add I2C IDs for Samsung S5K series camerasWerner Almesberger
These are te I2C IDs for all the Samsung S5K series cameras. This code is directly from Samsung's BSP. Signed-off-by: Werner Almesberger <werner@openmoko.org>
2009-03-05Add Samsung S3C CAMIF driverWerner Almesberger
Add Samsung S3C camera interface driver. Original code is from Samsung's BSP and was written for 2.6.21. Only tested on S3C6410. Signed-off-by: Werner Almesberger <werner@openmoko.org>
2009-03-05Update Samsung S3C camera interface driverWerner Almesberger
Update the camera interface driver from 2.6.21 to 2.6.29 and fix some trivial issues. There are still a few ugly spots, marked with "@@@". Only tested on S3C6410. Signed-off-by: Werner Almesberger <werner@openmoko.org>
2009-03-05Add Samsung S3C camera driver for V4LWerner Almesberger
This is the original Samsung S3C camera driver code from the 2.6.21 BSP. The changes that are needed to make this work in 2.6.29 are in the next patch. Signed-off-by: Werner Almesberger <werner@openmoko.org>
2009-03-05Add CAMIF clock to S3C6410.Werner Almesberger
Add camera interface clock to S3C6410. Signed-off-by: Werner Almesberger <werner@openmoko.org>
2009-03-05Add HCLKx2 to S3C64xx.Werner Almesberger
Add doubled HCLK to S3C64xx. Signed-off-by: Werner Almesberger <werner@openmoko.org>
2009-03-05Fix s3c64xx_setrate_clksrcWerner Almesberger
Note: this patch is already on the way upstream but is currently missing in the Openmoko kernel. Some of the rate selection logic in s3c64xx_setrate_clksrc uses what appears to be parent clock selection logic. This patch corrects it. I also added a check for overly large dividers to prevent them from changing unrelated clocks. Signed-off-by: Werner Almesberger <werner@openmoko.org>
2009-03-04config-3d7k-remove-mac80211.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-04clean-3d7K-3d7k.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-04fix-3d7k-misaligned-iis.patchAndy Green
This one is specially for Candy Chou :-) Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-04config-3d7k-correct-alsa-driver-name.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-04fix-3d7k-iis-constants.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-04MERGE-andy-tracking-patchset-editsmerge
2009-03-04Introduce generic backlight device on 3d7k.Matt Hsu
The code is borrowed from gta02. Signed-off-by: Matt Hsu <matt_hsu@openmoko.org>
2009-03-04fix-3d7k-remove-gps-wlan-pm.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-04fix-hdq-timeout-overflow.patchAndy Green
Reported-by: Neil Brown <neilb@suse.de> Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-04S3C64XX: Initial support for CPU frequency scalingMark Brown
This patch provides initial support for CPU frequency scaling on the Samsung S3C64XX series processors. Currently only S3C6410 processors are supported, though addition of another data table with supported clock rates should be sufficient to enable support for further CPUs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04S3C64XX: Add initial support for ARMCLKMark Brown
Add support for reconfiguring the clock for the ARM core, enabling CPUfreq support. Currently only the divider for ARMCLK may be changed, ARMPLL is left static. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04S3C: CPU detection supportKyungmin Park
Stroe the CPU ID to system_rev and use it to detect the CPU architecture. Even though s3c64xx has almost same IPs, some IPs such as OneNAND are different. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03fix-hdq-sample-period-calc.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-03Subject: ohci_s3c2410: Implement PM resume functionalityBalaji Rao
X-Git-Url: http://git.openmoko.org/?p=kernel.git;a=commitdiff_plain;h=522c644d34461fcd65a94cce1fcac9dc0d6cd828 ohci_s3c2410: Implement PM resume functionality It was observed that that s3c2410_hc's root hub was not autoresumed when the system was suspended with the root hub itself autosuspended. As an effect of this, it was observed that the bluetooth module wouldn't get detected at the hc's roothub ports when powered up after resume. And when 'lsusb' was executed, the roothub got out of autosuspend by force with a 'roothub lost power, resetting' message. This patch brings the hcd roothub out of resume at global resume thereby avoiding the issue. Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
2009-03-03ASoC: Put LM4853 under DAPM control on GTA02Mark Brown
Control for the power for the LM4853 on the GTA02 had been made directly visible to user space, needlessly burning power when no output was being produced and causing pops and clicks to be worsened due to a lack of integration with the power sequencing done by DAPM. Bring the amplifier power under DAPM control, saving power and reducing the levels of pops and clicks caused. The existing control is left in place for the benefit of scenario files but now has no effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Tone down debug for PCM enqueueMark Brown
It's a little verbose... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Use SND_SOC_DAPM_PIN_SWITCH for GTA02Mark Brown
Factors out a lot of code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Add Openmoko state file compatibility for DAPM switchesMark Brown
Openmoko had similar controls with "DAPM " prefixed to them - add that back to maintain compatibility with existing ALSA state files. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Update GTA02 for current DAPM pin APIsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Use snd_soc_dapm_nc_pin() in GTA02 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Remove #if 0 code from GTA02Mark Brown
More code cleanup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Remove some unused headers from the GTA02 audio driverMark Brown
Stops anyone wondering what they're needed for. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Strip in code changelog from GTA02 audio driverMark Brown
It's patchy and we have git history. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Add SND_SOC_DAPM_PIN_SWITCH controls for exposing DAPM pinsMark Brown
On some systems it is desirable for control for DAPM pins to be provided to user space. This is the case with things like GSM modems which are controlled primarily from user space, for example. Provide a helper which exposes the state of a DAPM pin to user space for use in cases like this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Constify pin names for DAPM pin status APIsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03Subject: pcf50633_charger_detection_fix.patchBalaji Rao
X-Git-Url: http://git.openmoko.org/?p=kernel.git;a=commitdiff_plain;h=f4fd6631973dbc67a5f4708014e81ca6e610ca05 pcf50633_charger_detection_fix.patch Fix PCF50633 charger detection code. Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
2009-03-03Re: About roothub losing power / SPI bitbang 3D7K blowoutBalaji Rao
> |> on current andy-tracking / OM_3D7K build. > |> > |> I didn't see this before, it seems to related to SPI bitbang, did we > |> break something? Here is the patch. I've not tested it, but it's most likely the fix, as I had seen a similar thing in spi_s3c24xx_gpio.
2009-03-03kernel.git/build: use "git branch" instead of "git-branch"?Timo Juhani Lindfors
Hi, git 1.6.0 in debian unstable does not put "git-branch" to a directory that is in PATH anymore > git-core (1:1.6.0.2-1) experimental; urgency=low > > * new upstream point release. > * debian/git-core.NEWS.Debian: new; mention that most of the programs > now are installed outside the default $PATH; the "git-xyzzy" form > in scripts and on the command line is no longer supported in 1.6.0. so the build script should probably be modified:
2009-03-03rtc-pcf50633: Fix month off-by-one errorRask Ingemann Lambertsen
The PCF50633 stores a month value of 1-12, but the kernel wants 0-11. Signed-off-by: Rask Ingemann Lambertsen <rask@sygehus.dk>
2009-03-02rename-gta03-dropped-3d7k-new-moniker.patchAndy Green
GTA03 project is dropped, long live Openmoko 3d7k project. This name was literally generated by picking the first character of the next four car license plates to pass by I am told. The should catch all GTA03 instances except the machine name. I registered a new machine name since the 3d7k is different from original GTA03, the machine number is 2120. Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-02MERGE-via-pending-tracking-hist-add-om_3d7k_machine-type-patchmerge
pending-tracking-hist top was add-om_3d7k_machine-type-patch / e4e3848be23080f6ca6727d2a4353f09e53b9781 ... parent commitmessage: From: Andy Green <andy@openmoko.com> add-om_3d7k_machine-type.patch Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-02Fix typo in mach-gta02Sven Rebhan
Improve the comment on falling back to 100mA if ADC is missing. Signed-off-by: Sven Rebhan <odinshorse@googlemail.com>
2009-03-02GTA02 GSM requires PCF50633 GPIOSven Rebhan
The GSM part of all MACH_NEO1973s require GPIO functions, thus we should select PCF50633_GPIO for GTA02. Signed-off-by: Sven Rebhan <odinshorse@googlemail.com>
2009-03-02OpenMoko: Update for normal WM8753 device registration.Mark Brown
The WM8753 driver now uses the standard I2C device registration model and so requires the platform to register the device. Convert the OpenMoko GTA0x series devices to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-02ASoC: Convert WM8753 to register via normal device probeMark Brown
The base support for the only in-tree user, the GTA01, is out of tree and will be updated separately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-02ASoC: Shuffle WM8753 device registration codeMark Brown
This patch should be pure code motion, separating that out from the functional changes to move to new style device registration. [Backported from upstream with some modifications for old code.] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-02MERGE-via-pending-tracking-hist-asoc-only-write-back-non-defaumerge
pending-tracking-hist top was asoc-only-write-back-non-defau / 04f55b6c2392d4af2b8b2178c333c7f131d3cdc0 ... parent commitmessage: From: Mark Brown <broonie@opensource.wolfsonmicro.com> ASoC: Only write back non-default registers when resuming WM8753 This will reduce the number of writes done on resume, allowing that to complete faster (especially on systems with very slow I2C like the current Samsung driver). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-02ARM/S3C2440: Don't build armv4t modules we can't loadRask Ingemann Lambertsen
The kernel can't load armv4t modules ("unknown relocation: 40"). This patch fixes the ARM makefile accordingly to tell GCC to generate armv4 code instead of armv4t code. The assembler still needs to allow armv4t instructions for some object files which are linked into the kernel. Signed-off-by: Rask Ingemann Lambertsen <rask@sygehus.dk>
2009-03-02Fixed corruption of LCM registersNicolas Dufresne
Some registers where not set properly, or at the right time (thanks to Balaji for his patch). Weak locking could lead to corruption when using sysfs to switch state from multiple threads or processes. The state transitions are now all atomic. The driver attribute 'last_state' was used for same purpose of 'normal_state'. Kept only 'normal_state' and used it in 'init_regs' instead of custom qvga parameter. This patch should fix bug #2235. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@gmail.com>
2009-03-02Subject: Get rid of board_info information in glamo and s3c24xx_gpio ↵Balaji Rao
spigpio_info. X-Git-Url: http://git.openmoko.org/?p=kernel.git;a=commitdiff_plain;h=740c6704e830829d8539a6cc34346ff1980cd9ee Get rid of board_info information in glamo and s3c24xx_gpio spigpio_info. The board info does not belong there and has been removed. In spi_s3c24xx_gpio, board_info has been removed in mainline. Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
2009-02-26AUDIO: Select DMA if I2S is configuredBen Dooks
Select the relevant DMA implementation when the sound driver is selected. Signed-off-by: Ben Dooks <ben@simtec.co.uk> -- Ben (ben@fluff.org, http://www.fluff.org/) 'a smiley only costs 4 bytes'
2009-02-26S3C64XX: Fix DMA channel numbersBen Dooks
The I2S TX and RX channels where reversed. Also add implicit numbers to the start of the two DMA controllers. Signed-off-by: Ben Dooks <ben@simtec.co.uk>
2009-02-26AUDIO: Fixup s3c-i2s-v2 merge problemsBen Dooks
Fix CONFIG_CPU_S3C64XX which should have been CONFIG_PLAT_S3C64XX. Fix the merge problems that failed to properly set the master/slave bits for S3C64XX. Signed-off-by: Ben Dooks <ben@simtec.co.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 14:22:58 +0000