aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-08-25x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against BAR, v3Yinghai Lu
David Witbrodt tracked down (and bisected) a hpet bootup hang on his system to the following problem: a BIOS bug made the hpet device visible as a generic PCI device. If e820 reserved entries happen to be registered first in the resource tree [which v2.6.26 started doing], then the PCI code will reallocate that device's BAR to some other address - breaking timer IRQs and hanging the system. ( Normally hpet devices are hidden by the BIOS from the OS's PCI discovery via chipset magic. Sometimes the hpet is not a PCI device at all. ) Solve this fundamental fragility by making non-PCI platform drivers insert resources into the resource tree even if it overlaps the e820 reserved entry, to keep the resource manager from updating the BAR. Also do these checks for the ioapic and mmconfig addresses, and emit a warning if this happens. Bisected-by: David Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Tested-by: David Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-24x86: do not enable TSC notifier if we don't need itLinus Torvalds
Impact: crash on non-TSC-equipped CPUs Don't enable the TSC notifier if we *either*: 1. don't have a CPU, or 2. have a CPU with constant TSC. In either of those cases, the notifier is either damaging (1) or useless(2). From: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-23x86 MCE: Fix CPU hotplug problem with multiple multicore AMD CPUsRafael J. Wysocki
During CPU hot-remove the sysfs directory created by threshold_create_bank(), defined in arch/x86/kernel/cpu/mcheck/mce_amd_64.c, has to be removed before its parent directory, created by mce_create_device(), defined in arch/x86/kernel/cpu/mcheck/mce_64.c . Moreover, when the CPU in question is hotplugged again, obviously the latter has to be created before the former. At present, the right ordering is not enforced, because all of these operations are carried out by CPU hotplug notifiers which are not appropriately ordered with respect to each other. This leads to serious problems on systems with two or more multicore AMD CPUs, among other things during suspend and hibernation. Fix the problem by placing threshold bank CPU hotplug callbacks in mce_cpu_callback(), so that they are invoked at the right places, if defined. Additionally, use kobject_del() to remove the sysfs directory associated with the kobject created by kobject_create_and_add() in threshold_create_bank(), to prevent the kernel from crashing during CPU hotplug operations on systems with two or more multicore AMD CPUs. This patch fixes bug #11337. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Andi Kleen <andi@firstfloor.org> Tested-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-23x86: fix: make PCI ECS for AMD CPUs hotplug capableRobert Richter
Until now, PCI ECS setup was performed at boot time only and for cpus that are enabled then. This patch fixes this and adds cpu hotplug. Tests sequence (check if ECS bit is set when bringing cpu online again): # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00404010 # ( perl -e 'sysseek(STDOUT, 0xC001001F, 0); print pack "l*", 8, 0x00400010' ) > /dev/cpu/1/msr # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00400010 # echo 0 > /sys/devices/system/cpu/cpu1/online # echo 1 > /sys/devices/system/cpu/cpu1/online # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00404010 Reported-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-23x86: fix: do not run code in amd_bus.c on non-AMD CPUsRobert Richter
Jan Beulich wrote: > Even worse - this would even try to access the MSR on non-AMD CPUs > (currently probably prevented just by the fact that only AMD ones use > family values of 0x10 or higher). This patch adds cpu vendor check to the postcore_initcalls. Reported-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: work around MTRR mask setting, v2Ingo Molnar
improve the debug printout: - make it actually display something - print it only once would be nice to have a WARN_ONCE() facility, to feed such things to kerneloops.org. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: fix section mismatch warning - uv_cpu_initMarcin Slusarz
WARNING: vmlinux.o(.cpuinit.text+0x3cc4): Section mismatch in reference from the function uv_cpu_init() to the function .init.text:uv_system_init() The function __cpuinit uv_cpu_init() references a function __init uv_system_init(). If uv_system_init is only used by uv_cpu_init then annotate uv_system_init with a matching annotation. uv_system_init was ment to be called only once, so do it from codepath (native_smp_prepare_cpus) which is called once, right before activation of other cpus (smp_init). Note: old code relied on uv_node_to_blade being initialized to 0, but it'a not initialized from anywhere. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: fix VMI for early paramsAlok Kataria
while fixing a different bug i moved the call to vmi_init before early params could be parsed. This broke the vmi specific commandline parameters. Fix that, by moving vmi initialization after kernel has got a chance to parse early parameters. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: fix two modpost warnings in mm/init_64.cJan Beulich
early_io{re,un}map() are __init and hence can't be called from __meminit functions. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: fix 1:1 mapping init on 64-bit (memory hotplug case)Jan Beulich
While I don't have a hotplug capable system at hand, I think two issues need fixing: - pud_phys (in kernel_physical_ampping_init()) would remain uninitialized in the after_bootmem case - the locking done just around phys_pmd_{init,update}() would leave out pgd updates, and it was needlessly covering code portions that do allocations (perhaps using a more friendly gfp value in alloc_low_page() would then be possible) Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22x86: work around MTRR mask settingYinghai Lu
Joshua Hoblitt reported that only 3 GB of his 16 GB of RAM is usable. Booting with mtrr_show showed us the BIOS-initialized MTRR settings - which are all wrong. So the root cause is that the BIOS has not set the mask correctly: > [ 0.429971] MSR00000200: 00000000d0000000 > [ 0.433305] MSR00000201: 0000000ff0000800 > should be ==> [ 0.433305] MSR00000201: 0000003ff0000800 > > [ 0.436638] MSR00000202: 00000000e0000000 > [ 0.439971] MSR00000203: 0000000fe0000800 > should be ==> [ 0.439971] MSR00000203: 0000003fe0000800 > > [ 0.443304] MSR00000204: 0000000000000006 > [ 0.446637] MSR00000205: 0000000c00000800 > should be ==> [ 0.446637] MSR00000205: 0000003c00000800 > > [ 0.449970] MSR00000206: 0000000400000006 > [ 0.453303] MSR00000207: 0000000fe0000800 > should be ==> [ 0.453303] MSR00000207: 0000003fe0000800 > > [ 0.456636] MSR00000208: 0000000420000006 > [ 0.459970] MSR00000209: 0000000ff0000800 > should be ==> [ 0.459970] MSR00000209: 0000003ff0000800 So detect this borkage and add the prefix 111. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: PAT Update validate_pat_support for intel CPUsvenkatesh.pallipadi@intel.com
Pentium III and Core Solo/Duo CPUs have an erratum " Page with PAT set to WC while associated MTRR is UC may consolidate to UC " which can result in WC setting in PAT to be ineffective. We will disable PAT on such CPUs, so that we can continue to use MTRR WC setting. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21devmem, x86: PAT Change /dev/mem mmap with O_SYNC to use UC_MINUSvenkatesh.pallipadi@intel.com
All kernel mappings like ioremap(), etc uses UC_MINUS as the type. /dev/mem mappings with /dev/mem being opened with O_SYNC however was using UC, resulting in a conflict with /dev/mem mmap failing. This seems to be affecting some apps (one being flashrom) which are using O_SYNC and which were working before. Switch /dev/mem with O_SYNC also to UC_MINUS. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: PAT proper tracking of set_memory_uc and friendsvenkatesh.pallipadi@intel.com
Big thinko in pat memtype tracking code. reserve_memtype should be called with physical address and not virtual address. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: fix BUG: unable to handle kernel paging request (numaq_tsc_disable)Vegard Nossum
This section mismatch: >> Seems to be a section mismatch; init_intel() is __cpuinit while >> numaq_tsc_disable() is __init. Seems to be introduced in: >> >> commit 64898a8bad8c94ad7a4bd5cc86b66edfbb081f4a >> Author: Yinghai Lu <yhlu.kernel@gmail.com> >> Date: Sat Jul 19 18:01:16 2008 -0700 >> >> x86: extend and use x86_quirks to clean up NUMAQ code > > Oops, I am wrong about numaq_tsc_disable() being __init. Still, I > believe that Yinghai might be able to say what's really wrong :-) Would lead to this crash: BUG: unable to handle kernel paging request at c08a45f0 IP: [<c08a45f0>] numaq_tsc_disable+0x0/0x40 Fixed by the patch below. Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: export pv_lock_ops non-GPLJeremy Fitzhardinge
None of the spinlock API is exported GPL, so there's no reason for pv_lock_ops to be. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: drago01 <drago01@gmail.com>
2008-08-21x86, mmiotrace: silence section mismatch warning - leave_uniprocessorMarcin Slusarz
WARNING: vmlinux.o(.text+0x180af): Section mismatch in reference from the function leave_uniprocessor() to the function .cpuinit.text:cpu_up() The function leave_uniprocessor() references the function __cpuinit cpu_up(). This is often because leave_uniprocessor lacks a __cpuinit annotation or the annotation of cpu_up is wrong. leave_uniprocessor calls cpu_up only when CONFIG_HOTPLUG_CPU is set, so it can be safely annotated as __ref Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pekka Paalanen <pq@iki.fi>
2008-08-21x86: use WARN() in arch/x86/kernelArjan van de Ven
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. This also allowed the folding of some if()'s into the WARN() Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: use WARN() in arch/x86/mm/ioremap.cArjan van de Ven
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21werror: fix pci calgaryDavid Howells
Fix an integer comparison always false warning in the PCI Calgary 64 driver. A u8 is being compared to something that's 512 by default, resulting in the following warning: arch/x86/kernel/pci-calgary_64.c:1285: warning: comparison is always false due to limited range of data type This was introduced by patch b34e90b8f0f30151349134f87b5dc6ef75a5218c. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20x86: fix oprofile + hibernation badnessAndi Kleen
Vegard Nossum reported oprofile + hibernation problems: > Now some warnings: > > ------------[ cut here ]------------ > WARNING: at /uio/arkimedes/s29/vegardno/git-working/linux-2.6/kernel/smp.c:328 s > mp_call_function_mask+0x194/0x1a0() The usual problem: the suspend function when interrupts are already disabled calls smp_call_function which is not allowed with interrupt off. But at this point all the other CPUs should be already down anyways, so it should be enough to just drop that. This patch should fix that problem at least by fixing cpu hotplug& suspend support. [ mingo@elte.hu: fixed 5 coding style errors. ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20x86, SGI UV: hardcode the TLB flush interrupt system vectorCliff Wickman
The UV TLB shootdown mechanism needs a system interrupt vector. Its vector had been hardcoded as 200, but needs to moved to the reserved system vector range so that it does not collide with some device vector. This is still temporary until dynamic system IRQ allocation is provided. But it will be needed when real UV hardware becomes available and runs 2.6.27. Signed-off-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20x86: fix Xorg startup/shutdown slowdown with PATVenki Pallipadi
Rene Herman reported significant Xorg startup/shutdown slowdown due to PAT. It turns out that the memtype list has thousands of entries. Add cached_entry to list add routine, in order to speed up the lookup for sequential reserve_memtype calls. Reported-by: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20x86: fix "kernel won't boot on a Cyrix MediaGXm (Geode)"Samuel Sieb
Cyrix MediaGXm/Cx5530 Unicorn Revision 1.19.3B has stopped booting starting at v2.6.22. The reason is this commit: > commit f25f64ed5bd3c2932493681bdfdb483ea707da0a > Author: Juergen Beisert <juergen@kreuzholzen.de> > Date: Sun Jul 22 11:12:38 2007 +0200 > > x86: Replace NSC/Cyrix specific chipset access macros by inlined functions. this commit activated a macro which was dormant before due to (buggy) macro side-effects. I've looked through various datasheets and found that the GXm and GXLV Geode processors don't have an incrementor. Remove the incrementor setup entirely. As the incrementor value differs according to clock speed and we would hope that the BIOS configures it correctly, it is probably the right solution. Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-19x86 iommu: remove unneeded parenthesisJiri Kosina
The parenthesis in __iommu_queue_command() are not needed when assigning into 'target' variable. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix build warnings in real mode code x86, calgary: fix section mismatch warning - get_tce_space_from_tar x86: silence section mismatch warning - get_local_pda x86, percpu: silence section mismatch warnings related to EARLY_PER_CPU variables x86: fix i486 suspend to disk CR4 oops x86: mpparse.c: fix section mismatch warning x86: mmconf: fix section mismatch warning x86: fix MP_processor_info section mismatch warning x86, tsc: fix section mismatch warning x86: correct register constraints for 64-bit atomic operations
2008-08-18Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: fix spurious 'inconsistent lock state' warning
2008-08-18Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Use generic compat_sys_old_readdir powerpc/kexec: Fix up KEXEC_CONTROL_CODE_SIZE missed during conversion powerpc: Remove dead module_find_bug code powerpc: Add CMO enabled flag and paging space data to lparcfg powerpc: Fix CMM page loaning on 64k page kernel with 4k hardware pages powerpc: Make CMO paging space pool ID and page size available powerpc: Fix lockdep IRQ tracing bug powerpc: Fix TLB invalidation on boot on 32-bit powerpc: Fix loss of vdso on fork on 32-bit
2008-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: lmb: Fix reserved region handling in lmb_enforce_memory_limit(). sparc64: Fix cmdline_memory_size handling bugs. sparc64: Fix overshoot in nid_range().
2008-08-18lockdep: fix spurious 'inconsistent lock state' warningDmitry Baryshkov
Since f82b217e3513fe3af342c0f3ee1494e86250c21c lockdep can output spurious warnings related to hwirqs due to hardirq_off shrinkage from int to bit-sized flag. Guard it with double negation to fix the warning. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: fix build warnings in real mode codeAndi Kleen
This recent patch commit c3965bd15118742d72b4bc1a290d37b3f081eb98 Author: Paul Jackson <pj@sgi.com> Date: Wed May 14 08:15:34 2008 -0700 x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant caused these new warnings during a normal build: In file included from linux-2.6/arch/x86/boot/memory.c:17: linux-2.6/include/linux/log2.h: In function '__ilog2_u32': linux-2.6/include/linux/log2.h:34: warning: implicit declaration of function 'fls' linux-2.6/include/linux/log2.h: In function '__ilog2_u64': linux-2.6/include/linux/log2.h:42: warning: implicit declaration of function 'fls64' linux-2.6/include/linux/log2.h: In function '__roundup_pow_of_two ': linux-2.6/include/linux/log2.h:63: warning: implicit declaration of function 'fls_long' I tried to fix them in log2.h, but it's difficult because the real mode environment is completely different from a normal kernel environment. Instead define an own ARRAY_SIZE macro in boot.h, similar to the other private macros there. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86, calgary: fix section mismatch warning - get_tce_space_from_tarMarcin Slusarz
WARNING: vmlinux.o(.text+0x27032): Section mismatch in reference from the function get_tce_space_from_tar() to the function .init.text:calgary_bus_has_devices() The function get_tce_space_from_tar() references the function __init calgary_bus_has_devices(). This is often because get_tce_space_from_tar lacks a __init annotation or the annotation of calgary_bus_has_devices is wrong. get_tce_space_from_tar is called only from __init function (calgary_init) and calls __init function (calgary_bus_has_devices). So annotate it properly. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Chandru Siddalingappa <chandru@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: silence section mismatch warning - get_local_pdaMarcin Slusarz
Take out part of get_local_pda referencing __init function (free_bootmem) to new (static) function marked as __ref. It's safe to do because free_bootmem is called before __init sections are dropped. WARNING: vmlinux.o(.cpuinit.text+0x3cd7): Section mismatch in reference from the function get_local_pda() to the function .init.text:free_bootmem() The function __cpuinit get_local_pda() references a function __init free_bootmem(). If free_bootmem is only used by get_local_pda then annotate free_bootmem with a matching annotation. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86, percpu: silence section mismatch warnings related to EARLY_PER_CPU ↵Marcin Slusarz
variables Quoting Mike Travis in "x86: cleanup early per cpu variables/accesses v4" (23ca4bba3e20c6c3cb11c1bb0ab4770b724d39ac): The DEFINE macro defines the per_cpu variable as well as the early map and pointer. It also initializes the per_cpu variable and map elements to "_initvalue". The early_* macros provide access to the initial map (usually setup during system init) and the early pointer. This pointer is initialized to point to the early map but is then NULL'ed when the actual per_cpu areas are setup. After that the per_cpu variable is the correct access to the variable. As these variables are NULL'ed before __init sections are dropped (in setup_per_cpu_maps), they can be safely annotated as __ref. This change silences following section mismatch warnings: WARNING: vmlinux.o(.data+0x46c0): Section mismatch in reference from the variable x86_cpu_to_apicid_early_ptr to the variable .init.data:x86_cpu_to_apicid_early_map The variable x86_cpu_to_apicid_early_ptr references the variable __initdata x86_cpu_to_apicid_early_map If the reference is valid then annotate the variable with __init* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x46c8): Section mismatch in reference from the variable x86_bios_cpu_apicid_early_ptr to the variable .init.data:x86_bios_cpu_apicid_early_map The variable x86_bios_cpu_apicid_early_ptr references the variable __initdata x86_bios_cpu_apicid_early_map If the reference is valid then annotate the variable with __init* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x46d0): Section mismatch in reference from the variable x86_cpu_to_node_map_early_ptr to the variable .init.data:x86_cpu_to_node_map_early_map The variable x86_cpu_to_node_map_early_ptr references the variable __initdata x86_cpu_to_node_map_early_map If the reference is valid then annotate the variable with __init* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: fix i486 suspend to disk CR4 oopsDavid Fries
arch/x86/power/cpu_32.c __save_processor_state calls read_cr4() only a i486 CPU doesn't have the CR4 register. Trying to read it produces an invalid opcode oops during suspend to disk. Use the safe rc4 reading op instead. If the value to be written is zero the write is skipped. arch/x86/power/hibernate_asm_32.S done: swapped the use of %eax and %ecx to use jecxz for the zero test and jump over store to %cr4. restore_image: s/%ecx/%eax/ to be consistent with done: In addition to __save_processor_state, acpi_save_state_mem, efi_call_phys_prelog, and efi_call_phys_epilog had checks added (acpi restore was in assembly and already had a check for non-zero). There were other reads and writes of CR4, but MCE and virtualization shouldn't be executed on a i486 anyway. Signed-off-by: David Fries <david@fries.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: mpparse.c: fix section mismatch warningMarcin Slusarz
WARNING: vmlinux.o(.text+0x118f7): Section mismatch in reference from the function construct_ioapic_table() to the function .init.text:MP_bus_info() The function construct_ioapic_table() references the function __init MP_bus_info(). This is often because construct_ioapic_table lacks a __init annotation or the annotation of MP_bus_info is wrong. construct_ioapic_table is called only from construct_default_ISA_mptable which is __init Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: mmconf: fix section mismatch warningMarcin Slusarz
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x1591): Section mismatch in reference from the function init_amd() to the function .init.text:check_enable_amd_mmconf_dmi() The function __cpuinit init_amd() references a function __init check_enable_amd_mmconf_dmi(). If check_enable_amd_mmconf_dmi is only used by init_amd then annotate check_enable_amd_mmconf_dmi with a matching annotation. check_enable_amd_mmconf_dmi is only called from init_amd which is __cpuinit Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: fix MP_processor_info section mismatch warningMarcin Slusarz
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x1fe7): Section mismatch in reference from the function MP_processor_info() to the variable .init.data:x86_quirks The function __cpuinit MP_processor_info() references a variable __initdata x86_quirks. If x86_quirks is only used by MP_processor_info then annotate x86_quirks with a matching annotation. MP_processor_info uses x86_quirks which is __init and is used only from smp_read_mpc and construct_default_ISA_mptable which are __init Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86, tsc: fix section mismatch warningMarcin Slusarz
WARNING: vmlinux.o(.text+0x7950): Section mismatch in reference from the function native_calibrate_tsc() to the function .init.text:tsc_read_refs() The function native_calibrate_tsc() references the function __init tsc_read_refs(). This is often because native_calibrate_tsc lacks a __init annotation or the annotation of tsc_read_refs is wrong. tsc_read_refs is called from native_calibrate_tsc which is not __init and native_calibrate_tsc cannot be marked __init Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18x86: correct register constraints for 64-bit atomic operationsMathieu Desnoyers
x86_64 add/sub atomic ops does not seems to accept integer values bigger than 32 bits as immediates. Intel's add/sub documentation specifies they have to be passed as registers. The only operations in the x86-64 architecture which accept arbitrary 64-bit immediates is "movq" to any register; similarly, the only operation which accept arbitrary 64-bit displacement is "movabs" to or from al/ax/eax/rax. http://gcc.gnu.org/onlinedocs/gcc-4.3.0/gcc/Machine-Constraints.html states : e 32-bit signed integer constant, or a symbolic reference known to fit that range (for immediate operands in sign-extending x86-64 instructions). Z 32-bit unsigned integer constant, or a symbolic reference known to fit that range (for immediate operands in zero-extending x86-64 instructions). Since add/sub does sign extension, using the "e" constraint seems appropriate. It applies to 2.6.27-rc, 2.6.26, 2.6.25... Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18powerpc: Use generic compat_sys_old_readdirChristoph Hellwig
Use the generic compat_sys_old_readdir instead of the powerpc one which is almost the same except for the almost complete lack of error handling. Note that we can't just use SYSCALL() in systbl.h because the native syscall is named old_readdir, not sys_old_readdir. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18powerpc/kexec: Fix up KEXEC_CONTROL_CODE_SIZE missed during conversionPaul Collins
Commit 163f6876f5c3ff8215e900b93779e960a56b3694 missed one, resulting in the following compile error: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S: Assembler messages: arch/powerpc/kernel/misc_32.S:902: Error: unsupported relocation against KEXEC_CONTROL_CODE_SIZE make[2]: *** [arch/powerpc/kernel/misc_32.o] Error 1 make[1]: *** [arch/powerpc/kernel] Error 2 make: *** [vmlinux] Error 2 I grepped arch/ and found no further instances. Signed-off-by: Paul Collins <paul@ondioline.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18powerpc: Remove dead module_find_bug codeSteven Rostedt
Doing some various "make randconfig", I came across an error when CONFIG_BUG was not set: arch/powerpc/kernel/module.c: In function 'module_find_bug': arch/powerpc/kernel/module.c:111: error: increment of pointer to unknown structure arch/powerpc/kernel/module.c:111: error: arithmetic on pointer to an incomplete type arch/powerpc/kernel/module.c:112: error: dereferencing pointer to incomplete type Looking further into this, I found that module_find_bug, defined in powerpc arch code, is not called anywhere, so this just removes it. There is a static module_find_bug in lib/bug.c but that is a separate issue. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18powerpc: Add CMO enabled flag and paging space data to lparcfgRobert Jennings
Add a field in lparcfg output to indicate whether the kernel is running on a dedicated or shared memory lpar. Added fields to show the paging space pool IDs and the CMO page size. Submitted-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18powerpc: Fix CMM page loaning on 64k page kernel with 4k hardware pagesBrian King
If the firmware page size used for collaborative memory overcommit is 4k, but the kernel is using 64k pages, the page loaning is currently broken as it only marks the first 4k page of each 64k page as loaned. This fixes this to iterate through each 4k page and mark them all as loaned/active. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18powerpc: Make CMO paging space pool ID and page size availableRobert Jennings
During platform setup, save off the primary/secondary paging space pool IDs and the page size. Added accessors in hvcall.h for these variables. This is needed for a subsequent fix. Submitted-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18powerpc: Fix lockdep IRQ tracing bugBenjamin Herrenschmidt
A small bogon sneaked into the ppc64 lockdep support. A test is branching slightly off causing a clobbered register value to overwrite the irq state under some circumstances. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18powerpc: Fix TLB invalidation on boot on 32-bitRocky Craig
The intent of "flush_tlbs" is to invalidate all TLB entries by doing a TLB invalidate instruction for all pages in the address range 0 to 0x00400000. A loop counter is set up at the high value and decremented by page size. However, the loop is only done once as the sense of the conditional branch at the loop end does not match the setup/decrement. This fixes it to do the whole range by correcting the branch condition. Signed-off-by: Rocky Craig <rocky.craig@hp.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18powerpc: Fix loss of vdso on fork on 32-bitBenjamin Herrenschmidt
When we fork, init_new_context() improperly resets the vdso_base of the new context to 0. That means that the new process loses access to the vdso for signal trampolines. The initialization should be unnecessary anyway as the context on a fresh mm should be 0 in the first place and binfmt_elf will initialize that value for a newly loaded process. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdricoh_cs: removed unused #include <version.h> s3cmci: attach get_cd host ops s3cmci: fix sparse errors from non-exported functions